From: Peter Seiderer Date: Tue, 2 Jun 2015 19:07:16 +0000 (+0200) Subject: ARM: dts: nitrogen6x: add CAN support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3e22339487c914d38e08215cae3d1d219af99aff;p=linux-beck.git ARM: dts: nitrogen6x: add CAN support Regulator stuff copied from imx6qdl-tx6.dtsi, pin configuration taken from Boundary Devices linux kernel tree ([1] and [2]). [1] https://github.com/boundarydevices/linux-imx6/blob/boundary-imx_3.10.17_1.0.2_ga/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi [2] https://github.com/boundarydevices/linux-imx6/blob/boundary-imx_3.10.17_1.0.2_ga/arch/arm/boot/dts/imx6qdl.dtsi Signed-off-by: Peter Seiderer Tested-by: Eric Nelson Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 3af16dfe417b..67c76888dab3 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -54,6 +54,17 @@ gpio = <&gpio3 22 0>; enable-active-high; }; + + reg_can_xcvr: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; }; gpio-keys { @@ -149,6 +160,13 @@ status = "okay"; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + &ecspi1 { fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; @@ -245,6 +263,20 @@ >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1