From: Petr Štetiar Date: Wed, 20 Apr 2016 00:42:07 +0000 (-0500) Subject: PCI: imx6: Add reset-gpio-active-high boolean property to DT X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3ea8529acc30467331b7b1f5da6cf668fac091c7;p=linux-beck.git PCI: imx6: Add reset-gpio-active-high boolean property to DT Currently the reset-gpio DT property which controls the PCI bus device reset signal defaults to active-low reset sequence (L=reset state, H=operation state) plus the code in reset function isn't GPIO polarity aware - it doesn't matter if the defined reset-gpio is active-low or active-high, it will always result into active-low reset sequence. I've tried to fix it properly and change the reset-gpio reset sequence to be polarity-aware, but this patch has been accepted and then reverted as it has introduced few backward incompatible issues: 1. Some DTBs, for example, imx6qdl-sabresd, don't define reset-gpio polarity correctly: reset-gpio = <&gpio7 12 0>; which means that it's defined as active-high, but in reality it's active-low; thus it wouldn't work without a DTS fix. 2. The logic in the reset function is inverted: gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0) msleep(100); gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1); so even if some of the i.MX6 boards had reset-gpio polarity defined correctly in their DTSes, they would stop working. As we can't break old DTBs, we can't fix them, so we need to introduce this new DT reset-gpio-active-high boolean property so we can support boards with active-high reset sequence. This active-high reset sequence is for example needed on Apalis SoMs, where GPIO1_IO28, used to PCIe reset is not connected directly to PERST# PCIe signal, but it's ORed with RESETBMCU coming off the PMIC, and thus is inverted, active-high. Tested-by: Tim Harvey # Gateworks Ventana boards (which have active-low PERST#) Signed-off-by: Petr Štetiar Signed-off-by: Bjorn Helgaas Reviewed-by: Lucas Stach Acked-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt index 0561e88f3b37..636707df0952 100644 --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt @@ -19,6 +19,12 @@ Optional properties: - fsl,tx-deemph-gen2-6db: Gen2 (6db) De-emphasis value. Default: 20 - fsl,tx-swing-full: Gen2 TX SWING FULL value. Default: 127 - fsl,tx-swing-low: TX launch amplitude swing_low value. Default: 127 +- reset-gpio: Should specify the GPIO for controlling the PCI bus device reset + signal. It's not polarity aware and defaults to active-low reset sequence + (L=reset state, H=operation state). +- reset-gpio-active-high: If present then the reset sequence using the GPIO + specified in the "reset-gpio" property is reversed (H=reset state, + L=operation state). Additional required properties for imx6sx-pcie: - clock names: Must include the following additional entries: diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 7cfe00e34f58..0b8793d908de 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -33,6 +33,7 @@ struct imx6_pcie { int reset_gpio; + bool gpio_active_high; struct clk *pcie_bus; struct clk *pcie_phy; struct clk *pcie_inbound_axi; @@ -348,9 +349,11 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) /* Some boards don't have PCIe reset GPIO. */ if (gpio_is_valid(imx6_pcie->reset_gpio)) { - gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0); + gpio_set_value_cansleep(imx6_pcie->reset_gpio, + imx6_pcie->gpio_active_high); msleep(100); - gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1); + gpio_set_value_cansleep(imx6_pcie->reset_gpio, + !imx6_pcie->gpio_active_high); } if (imx6_pcie->is_imx6sx) @@ -600,9 +603,14 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) /* Fetch GPIOs */ imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); + imx6_pcie->gpio_active_high = of_property_read_bool(np, + "reset-gpio-active-high"); if (gpio_is_valid(imx6_pcie->reset_gpio)) { ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio, - GPIOF_OUT_INIT_LOW, "PCIe reset"); + imx6_pcie->gpio_active_high ? + GPIOF_OUT_INIT_HIGH : + GPIOF_OUT_INIT_LOW, + "PCIe reset"); if (ret) { dev_err(&pdev->dev, "unable to get reset gpio\n"); return ret;