From: Ebru Akagunduz Date: Sat, 8 Mar 2014 10:27:50 +0000 (+0200) Subject: Staging:dgap: Fix Macros with complex values should be enclosed in dgap.h X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3eed3d360d9758c13763fb7b22da41471ad1fac3;p=linux-beck.git Staging:dgap: Fix Macros with complex values should be enclosed in dgap.h Fix checkpatch.pl issues with macros with complex values should be enclosed in dgap.h Signed-off-by: Ebru Akagunduz Reviewed-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/dgap/dgap.h b/drivers/staging/dgap/dgap.h index f0a2e62d917a..faa9b13c7d30 100644 --- a/drivers/staging/dgap/dgap.h +++ b/drivers/staging/dgap/dgap.h @@ -768,8 +768,8 @@ struct un_t { #if !defined(TIOCMODG) -#define TIOCMODG ('d'<<8) | 250 /* get modem ctrl state */ -#define TIOCMODS ('d'<<8) | 251 /* set modem ctrl state */ +#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */ +#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */ #ifndef TIOCM_LE #define TIOCM_LE 0x01 /* line enable */ @@ -788,44 +788,44 @@ struct un_t { #endif #if !defined(TIOCMSET) -#define TIOCMSET ('d'<<8) | 252 /* set modem ctrl state */ -#define TIOCMGET ('d'<<8) | 253 /* set modem ctrl state */ +#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */ +#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */ #endif #if !defined(TIOCMBIC) -#define TIOCMBIC ('d'<<8) | 254 /* set modem ctrl state */ -#define TIOCMBIS ('d'<<8) | 255 /* set modem ctrl state */ +#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */ +#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */ #endif #if !defined(TIOCSDTR) -#define TIOCSDTR ('e'<<8) | 0 /* set DTR */ -#define TIOCCDTR ('e'<<8) | 1 /* clear DTR */ +#define TIOCSDTR (('e'<<8) | 0) /* set DTR */ +#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */ #endif /************************************************************************ * Ioctl command arguments for DIGI parameters. ************************************************************************/ -#define DIGI_GETA ('e'<<8) | 94 /* Read params */ +#define DIGI_GETA (('e'<<8) | 94) /* Read params */ -#define DIGI_SETA ('e'<<8) | 95 /* Set params */ -#define DIGI_SETAW ('e'<<8) | 96 /* Drain & set params */ -#define DIGI_SETAF ('e'<<8) | 97 /* Drain, flush & set params */ +#define DIGI_SETA (('e'<<8) | 95) /* Set params */ +#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */ +#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */ -#define DIGI_KME ('e'<<8) | 98 /* Read/Write Host */ +#define DIGI_KME (('e'<<8) | 98) /* Read/Write Host */ /* Adapter Memory */ -#define DIGI_GETFLOW ('e'<<8) | 99 /* Get startc/stopc flow */ +#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */ /* control characters */ -#define DIGI_SETFLOW ('e'<<8) | 100 /* Set startc/stopc flow */ +#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */ /* control characters */ -#define DIGI_GETAFLOW ('e'<<8) | 101 /* Get Aux. startc/stopc */ +#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */ /* flow control chars */ -#define DIGI_SETAFLOW ('e'<<8) | 102 /* Set Aux. startc/stopc */ +#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */ /* flow control chars */ -#define DIGI_GEDELAY ('d'<<8) | 246 /* Get edelay */ -#define DIGI_SEDELAY ('d'<<8) | 247 /* Set edelay */ +#define DIGI_GEDELAY (('d'<<8) | 246) /* Get edelay */ +#define DIGI_SEDELAY (('d'<<8) | 247) /* Set edelay */ struct digiflow_t { unsigned char startc; /* flow cntl start char */ @@ -834,8 +834,8 @@ struct digiflow_t { #ifdef FLOW_2200 -#define F2200_GETA ('e'<<8) | 104 /* Get 2x36 flow cntl flags */ -#define F2200_SETAW ('e'<<8) | 105 /* Set 2x36 flow cntl flags */ +#define F2200_GETA (('e'<<8) | 104) /* Get 2x36 flow cntl flags */ +#define F2200_SETAW (('e'<<8) | 105) /* Set 2x36 flow cntl flags */ #define F2200_MASK 0x03 /* 2200 flow cntl bit mask */ #define FCNTL_2200 0x01 /* 2x36 terminal flow cntl */ #define PCNTL_2200 0x02 /* 2x36 printer flow cntl */ @@ -971,7 +971,7 @@ struct digi_dinfo { char dinfo_version[16]; /* driver version */ }; -#define DIGI_GETDD ('d'<<8) | 248 /* get driver info */ +#define DIGI_GETDD (('d'<<8) | 248) /* get driver info */ /************************************************************************ * Structure used with ioctl commands for per-board information @@ -991,7 +991,7 @@ struct digi_info { char info_reserved[7]; /* for future expansion */ }; -#define DIGI_GETBD ('d'<<8) | 249 /* get board info */ +#define DIGI_GETBD (('d'<<8) | 249) /* get board info */ struct digi_stat { unsigned int info_chan; /* Channel number (0 based) */ @@ -1006,7 +1006,7 @@ struct digi_stat { unsigned long info_reserved[8]; /* for future expansion */ }; -#define DIGI_GETSTAT ('d'<<8) | 244 /* get board info */ +#define DIGI_GETSTAT (('d'<<8) | 244) /* get board info */ /************************************************************************ * * Structure used with ioctl commands for per-channel information @@ -1049,7 +1049,7 @@ struct digi_cmd { #define INFO_CH_WLOW 0x0020 #define INFO_XXBUF_BUSY 0x0040 -#define DIGI_GETCH ('d'<<8) | 245 /* get board info */ +#define DIGI_GETCH (('d'<<8) | 245) /* get board info */ /* Board type definitions */ @@ -1094,12 +1094,12 @@ struct digi_cmd { #define BD_TRIBOOT 0x8 #define BD_BADKME 0x80 -#define DIGI_LOOPBACK ('d'<<8) | 252 /* Enable/disable UART internal loopback */ -#define DIGI_SPOLL ('d'<<8) | 254 /* change poller rate */ +#define DIGI_LOOPBACK (('d'<<8) | 252) /* Enable/disable UART internal loopback */ +#define DIGI_SPOLL (('d'<<8) | 254) /* change poller rate */ #define DIGI_SETCUSTOMBAUD _IOW('e', 106, int) /* Set integer baud rate */ #define DIGI_GETCUSTOMBAUD _IOR('e', 107, int) /* Get integer baud rate */ -#define DIGI_RESET_PORT ('e'<<8) | 93 /* Reset port */ +#define DIGI_RESET_PORT (('e'<<8) | 93) /* Reset port */ /************************************************************************ * Channel information structure.