From: Devin Ryles Date: Wed, 5 Nov 2014 21:30:03 +0000 (-0500) Subject: i2c: i801: Add DeviceIDs for SunrisePoint LP X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3eee1799aed90e990e02a73a89bfcff1982c74dd;p=linux-beck.git i2c: i801: Add DeviceIDs for SunrisePoint LP Signed-off-by: Devin Ryles Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 793c83dac738..82f48f774afb 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -29,6 +29,7 @@ Supported adapters: * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) * Intel Sunrise Point-H (PCH) + * Intel Sunrise Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 917c3585f45b..06e99eb64295 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -123,6 +123,7 @@ config I2C_I801 Wildcat Point-LP (PCH) BayTrail (SOC) Sunrise Point-H (PCH) + Sunrise Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 48b925a0ae7c..8fafb254e42a 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -59,6 +59,7 @@ * Wildcat Point-LP (PCH) 0x9ca2 32 hard yes yes yes * BayTrail (SOC) 0x0f12 32 hard yes yes yes * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes + * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes * * Features supported by this driver: * Software PEC no @@ -186,6 +187,7 @@ #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123 +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23 struct i801_mux_config { char *gpio_chip; @@ -846,6 +848,7 @@ static const struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) }, { 0, } };