From: Nishanth Menon Date: Tue, 26 Apr 2011 09:33:10 +0000 (-0700) Subject: OMAP3+: voltage: remove initial voltage X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3f126087ee143775961947b39416aad03044c988;p=linux-beck.git OMAP3+: voltage: remove initial voltage Blindly setting 1.2V in the initial structure may not even match the default voltages stored in the voltage table which are supported for the domain. For example, OMAP3430 core domain does not use 1.2V and ends up generating a warning on the first transition. Further, since omap2_set_init_voltage is called as part of the pm framework's initialization sequence to configure the voltage required for the current OPP, the call does(and has to) setup the system voltage(curr_volt as a result) using the right mechanisms appropriate for the system at that point of time. This also overrides initialization we are currently doing in voltage.c making it redundant. So, remove the wrong and redundant initialization. Signed-off-by: Nishanth Menon Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 6fb520999b6e..0c1552d9d995 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->curr_volt = 1200000; vdd->volt_scale = vp_forceupdate_scale_voltage; vdd->vp_enabled = false;