From: Emmanuel Grumbach Date: Sun, 30 Mar 2014 05:40:46 +0000 (+0300) Subject: iwlwifi: remove IWL_UCODE_TLV_FLAGS_RX_ENERGY_API flag X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=3fe47dca049f3a684084fec08fabb88bece19a24;p=linux-beck.git iwlwifi: remove IWL_UCODE_TLV_FLAGS_RX_ENERGY_API flag All the supported firmwares have this flag set. Signed-off-by: Emmanuel Grumbach --- diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index c9a3ca6b0c80..7d5e7ba41420 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -77,7 +77,6 @@ * @IWL_UCODE_TLV_FLAGS_UAPSD: This uCode image supports uAPSD * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan * offload profile config command. - * @IWL_UCODE_TLV_FLAGS_RX_ENERGY_API: supports rx signal strength api * @IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2: using the new time event API. * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six * (rather than two) IPv6 addresses @@ -108,7 +107,6 @@ enum iwl_ucode_tlv_flag { IWL_UCODE_TLV_FLAGS_P2P = BIT(3), IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4), IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7), - IWL_UCODE_TLV_FLAGS_RX_ENERGY_API = BIT(8), IWL_UCODE_TLV_FLAGS_TIME_EVENT_API_V2 = BIT(9), IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10), IWL_UCODE_TLV_FLAGS_BF_UPDATED = BIT(11), diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 40fd5dc46abe..cf7276967acd 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -132,41 +132,6 @@ static void iwl_mvm_pass_packet_to_mac80211(struct iwl_mvm *mvm, ieee80211_rx(mvm->hw, skb); } -static void iwl_mvm_calc_rssi(struct iwl_mvm *mvm, - struct iwl_rx_phy_info *phy_info, - struct ieee80211_rx_status *rx_status) -{ - int rssi_a, rssi_b, rssi_a_dbm, rssi_b_dbm, max_rssi_dbm; - u32 agc_a, agc_b; - u32 val; - - val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_AGC_IDX]); - agc_a = (val & IWL_OFDM_AGC_A_MSK) >> IWL_OFDM_AGC_A_POS; - agc_b = (val & IWL_OFDM_AGC_B_MSK) >> IWL_OFDM_AGC_B_POS; - - val = le32_to_cpu(phy_info->non_cfg_phy[IWL_RX_INFO_RSSI_AB_IDX]); - rssi_a = (val & IWL_OFDM_RSSI_INBAND_A_MSK) >> IWL_OFDM_RSSI_A_POS; - rssi_b = (val & IWL_OFDM_RSSI_INBAND_B_MSK) >> IWL_OFDM_RSSI_B_POS; - - /* - * dBm = rssi dB - agc dB - constant. - * Higher AGC (higher radio gain) means lower signal. - */ - rssi_a_dbm = rssi_a - IWL_RSSI_OFFSET - agc_a; - rssi_b_dbm = rssi_b - IWL_RSSI_OFFSET - agc_b; - max_rssi_dbm = max_t(int, rssi_a_dbm, rssi_b_dbm); - - IWL_DEBUG_STATS(mvm, "Rssi In A %d B %d Max %d AGCA %d AGCB %d\n", - rssi_a_dbm, rssi_b_dbm, max_rssi_dbm, agc_a, agc_b); - - rx_status->signal = max_rssi_dbm; - rx_status->chains = (le16_to_cpu(phy_info->phy_flags) & - RX_RES_PHY_FLAGS_ANTENNA) - >> RX_RES_PHY_FLAGS_ANTENNA_POS; - rx_status->chain_signal[0] = rssi_a_dbm; - rx_status->chain_signal[1] = rssi_b_dbm; -} - /* * iwl_mvm_get_signal_strength - use new rx PHY INFO API * values are reported by the fw as positive values - need to negate @@ -336,10 +301,7 @@ int iwl_mvm_rx_rx_mpdu(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, */ /*rx_status.flag |= RX_FLAG_MACTIME_MPDU;*/ - if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_RX_ENERGY_API) - iwl_mvm_get_signal_strength(mvm, phy_info, &rx_status); - else - iwl_mvm_calc_rssi(mvm, phy_info, &rx_status); + iwl_mvm_get_signal_strength(mvm, phy_info, &rx_status); IWL_DEBUG_STATS_LIMIT(mvm, "Rssi %d, TSF %llu\n", rx_status.signal, (unsigned long long)rx_status.mactime);