From: Lily Zhang Date: Sun, 1 Nov 2009 03:14:53 +0000 (+0800) Subject: ENGR00117843 Missing i.MX headers for kernel headers_install X-Git-Tag: v3.0.35-fsl~2456 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=409e83e5eee404a7c0059d740be2a6546c9dae2d;p=karo-tx-linux.git ENGR00117843 Missing i.MX headers for kernel headers_install Add i.MX specific files into include/linux/Kbuild ISL29023:Add device head file to Kbuild This patch adds device head file to Kbuild to pass Signed-off-by: Lily Zhang --- diff --git a/include/linux/Kbuild b/include/linux/Kbuild index ed627103aa94..b03fa4e50d29 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -19,6 +19,30 @@ header-y += netfilter_ipv6/ header-y += usb/ header-y += wimax/ +## i.MX specific files +header-y += fsl_devices.h +header-y += imx_adc.h +header-y += ipu.h +header-y += isl29023.h +header-y += mxc_asrc.h +header-y += mxc_mlb.h +header-y += mxc_pf.h +header-y += mxc_scc2_driver.h +header-y += mxc_scc_driver.h +header-y += mxc_srtc.h +header-y += mxc_si4702.h +header-y += mxc_sim_interface.h +header-y += mxc_v4l2.h +header-y += mxcfb.h +header-y += pmic_adc.h +header-y += pmic_battery.h +header-y += pmic_external.h +header-y += pmic_light.h +header-y += pmic_rtc.h +header-y += pmic_status.h +header-y += pxp_dma.h +header-y += soundcard.h + objhdr-y += version.h ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \ diff --git a/include/linux/imx_adc.h b/include/linux/imx_adc.h new file mode 100644 index 000000000000..6cab35c75287 --- /dev/null +++ b/include/linux/imx_adc.h @@ -0,0 +1,275 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU Lesser General + * Public License. You may obtain a copy of the GNU Lesser General + * Public License Version 2.1 or later at the following locations: + * + * http://www.opensource.org/licenses/lgpl-license.html + * http://www.gnu.org/copyleft/lgpl.html + */ + +#ifndef __ASM_ARCH_IMX_ADC_H__ +#define __ASM_ARCH_IMX_ADC_H__ + +/*! + * @defgroup IMX_ADC Digitizer Driver + * @ingroup IMX_DRVRS + */ + +/*! + * @file arch-mxc/imx_adc.h + * @brief This is the header of IMX ADC driver. + * + * @ingroup IMX_ADC + */ + +#include + +/*! + * @enum IMX_ADC_STATUS + * @brief Define return values for all IMX_ADC APIs. + * + * These return values are used by all of the IMX_ADC APIs. + * + * @ingroup IMX_ADC + */ +enum IMX_ADC_STATUS { + /*! The requested operation was successfully completed. */ + IMX_ADC_SUCCESS = 0, + /*! The requested operation could not be completed due to an error. */ + IMX_ADC_ERROR = -1, + /*! + * The requested operation failed because one or more of the + * parameters was invalid. + */ + IMX_ADC_PARAMETER_ERROR = -2, + /*! + * The requested operation could not be completed because the ADC + * hardware does not support it. + */ + IMX_ADC_NOT_SUPPORTED = -3, + /*! Error in malloc function */ + IMX_ADC_MALLOC_ERROR = -5, + /*! Error in un-subscribe event */ + IMX_ADC_UNSUBSCRIBE_ERROR = -6, + /*! Event occur and not subscribed */ + IMX_ADC_EVENT_NOT_SUBSCRIBED = -7, + /*! Error - bad call back */ + IMX_ADC_EVENT_CALL_BACK = -8, + /*! + * The requested operation could not be completed because there + * are too many ADC client requests + */ + IMX_ADC_CLIENT_NBOVERFLOW = -9, +}; + +/* + * Macros implementing error handling + */ +#define CHECK_ERROR(a) \ +do { \ + int ret = (a); \ + if (ret != IMX_ADC_SUCCESS) \ + return ret; \ +} while (0) + +#define CHECK_ERROR_KFREE(func, freeptrs) \ +do { \ + int ret = (func); \ + if (ret != IMX_ADC_SUCCESS) { \ + freeptrs; \ + return ret; \ + } \ +} while (0) + +#define MOD_NAME "mxcadc" + +/*! + * @name IOCTL user space interface + */ + +/*! + * Initialize ADC. + * Argument type: none. + */ +#define IMX_ADC_INIT _IO('p', 0xb0) +/*! + * De-initialize ADC. + * Argument type: none. + */ +#define IMX_ADC_DEINIT _IO('p', 0xb1) +/*! + * Convert one channel. + * Argument type: pointer to t_adc_convert_param. + */ +#define IMX_ADC_CONVERT _IOWR('p', 0xb2, int) +/*! + * Convert multiple channels. + * Argument type: pointer to t_adc_convert_param. + */ +#define IMX_ADC_CONVERT_MULTICHANNEL _IOWR('p', 0xb4, int) + +/*! @{ */ +/*! + * @name Touch Screen minimum and maximum values + */ +#define IMX_ADC_DEVICE "/dev/imx_adc" + +/* + * Maximun allowed variation in the three X/Y co-ordinates acquired from + * touch screen + */ +#define DELTA_Y_MAX 100 +#define DELTA_X_MAX 100 + +/* Upon clearing the filter, this is the delay in restarting the filter */ +#define FILTER_MIN_DELAY 4 + +/* Length of X and Y touch screen filters */ +#define FILTLEN 3 + +#define TS_X_MAX 1000 +#define TS_Y_MAX 1000 + +#define TS_X_MIN 80 +#define TS_Y_MIN 80 + +/*! @} */ +/*! + * This enumeration defines input channels for IMX ADC + */ + +enum t_channel { + TS_X_POS, + TS_Y_POS, + GER_PURPOSE_ADC0, + GER_PURPOSE_ADC1, + GER_PURPOSE_ADC2, + GER_PURPOSE_MULTICHNNEL, +}; + +/*! + * This structure is used to report touch screen value. + */ +struct t_touch_screen { + /* Touch Screen X position */ + unsigned int x_position; + /* Touch Screen X position1 */ + unsigned int x_position1; + /* Touch Screen X position2 */ + unsigned int x_position2; + /* Touch Screen X position3 */ + unsigned int x_position3; + /* Touch Screen Y position */ + unsigned int y_position; + /* Touch Screen Y position1 */ + unsigned int y_position1; + /* Touch Screen Y position2 */ + unsigned int y_position2; + /* Touch Screen Y position3 */ + unsigned int y_position3; + /* Touch Screen contact value */ + unsigned int contact_resistance; + /* Flag indicate the data usability */ + unsigned int valid_flag; +}; + +/*! + * This structure is used with IOCTL code \a IMX_ADC_CONVERT, + * \a IMX_ADC_CONVERT_8X and \a IMX_ADC_CONVERT_MULTICHANNEL. + */ + +struct t_adc_convert_param { + /* channel or channels to be sampled. */ + enum t_channel channel; + /* holds up to 16 sampling results */ + unsigned short result[16]; +}; + +/* EXPORTED FUNCTIONS */ + +#ifdef __KERNEL__ +/* Driver data */ +struct imx_adc_data { + u32 irq; + struct clk *adc_clk; +}; + +/*! + * This function initializes all ADC registers with default values. This + * function also registers the interrupt events. + * + * @return This function returns IMX_ADC_SUCCESS if successful. + */ +enum IMX_ADC_STATUS imx_adc_init(void); + +/*! + * This function disables the ADC, de-registers the interrupt events. + * + * @return This function returns IMX_ADC_SUCCESS if successful. + */ +enum IMX_ADC_STATUS imx_adc_deinit(void); + +/*! + * This function triggers a conversion and returns one sampling result of one + * channel. + * + * @param channel The channel to be sampled + * @param result The pointer to the conversion result. The memory + * should be allocated by the caller of this function. + * + * @return This function returns IMX_ADC_SUCCESS if successful. + */ + +enum IMX_ADC_STATUS imx_adc_convert(enum t_channel channel, + unsigned short *result); + +/*! + * This function triggers a conversion and returns sampling results of each + * specified channel. + * + * @param channels This input parameter is bitmap to specify channels + * to be sampled. + * @param result The pointer to array to store sampling result. + * The order of the result in the array is from lowest + * channel number to highest channel number of the + * sampled channels. + * The memory should be allocated by the caller of this + * function. + * Note that the behavior of this function might differ + * from one platform to another regarding especially + * channels order. + * + * @return This function returns IMX_ADC_SUCCESS if successful. + */ + +enum IMX_ADC_STATUS imx_adc_convert_multichnnel(enum t_channel channels, + unsigned short *result); + +/*! + * This function retrieves the current touch screen operation mode. + * + * @param touch_sample Pointer to touch sample. + * @param wait_tsi if true, we wait until interrupt occurs + * @return This function returns IMX_ADC_SUCCESS if successful. + */ +enum IMX_ADC_STATUS imx_adc_get_touch_sample(struct t_touch_screen *ts_value, + int wait_tsi); + +/*! + * This function read the touch screen value. + * + * @param touch_sample return value of touch screen + * @param wait_tsi if true, we need wait until interrupt occurs + * @return This function returns 0. + */ +enum IMX_ADC_STATUS imx_adc_read_ts(struct t_touch_screen *touch_sample, + int wait_tsi); + +int is_imx_adc_ready(void); + +#endif /* _KERNEL */ +#endif /* __ASM_ARCH_IMX_ADC_H__ */ diff --git a/include/linux/isl29023.h b/include/linux/isl29023.h new file mode 100644 index 000000000000..c5106ae32abe --- /dev/null +++ b/include/linux/isl29023.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __ISL29023_H__ +#define __ISL29023_H__ + +#include + +#define ISL29023_PD_MODE 0x0 +#define ISL29023_ALS_ONCE_MODE 0x1 +#define ISL29023_IR_ONCE_MODE 0x2 +#define ISL29023_ALS_CONT_MODE 0x5 +#define ISL29023_IR_CONT_MODE 0x6 + +#define ISL29023_INT_PERSISTS_1 0x0 +#define ISL29023_INT_PERSISTS_4 0x1 +#define ISL29023_INT_PERSISTS_8 0x2 +#define ISL29023_INT_PERSISTS_16 0x3 + +#define ISL29023_RES_16 0x0 +#define ISL29023_RES_12 0x1 +#define ISL29023_RES_8 0x2 +#define ISL29023_RES_4 0x3 + +#define ISL29023_RANGE_1K 0x0 +#define ISL29023_RANGE_4K 0x1 +#define ISL29023_RANGE_16K 0x2 +#define ISL29023_RANGE_64K 0x3 + +#endif diff --git a/include/linux/mxc_asrc.h b/include/linux/mxc_asrc.h new file mode 100644 index 000000000000..13a4850fa627 --- /dev/null +++ b/include/linux/mxc_asrc.h @@ -0,0 +1,210 @@ +/* + * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/*! + * @file mx35_asrc.h + * + * @brief MX35 Asynchronous Sample Rate Converter + * + * @ingroup ?? + */ + +#ifndef __MXC_ASRC_H__ +#define __MXC_ASRC_H__ + +#define ASRC_IOC_MAGIC 'C' + +#define ASRC_REQ_PAIR _IOWR(ASRC_IOC_MAGIC, 0, struct asrc_req) +#define ASRC_CONFIG_PAIR _IOWR(ASRC_IOC_MAGIC, 1, struct asrc_config) +#define ASRC_RELEASE_PAIR _IOW(ASRC_IOC_MAGIC, 2, enum asrc_pair_index) +#define ASRC_QUERYBUF _IOWR(ASRC_IOC_MAGIC, 3, struct asrc_buffer) +#define ASRC_Q_INBUF _IOW(ASRC_IOC_MAGIC, 4, struct asrc_buffer) +#define ASRC_DQ_INBUF _IOW(ASRC_IOC_MAGIC, 5, struct asrc_buffer) +#define ASRC_Q_OUTBUF _IOW(ASRC_IOC_MAGIC, 6, struct asrc_buffer) +#define ASRC_DQ_OUTBUF _IOW(ASRC_IOC_MAGIC, 7, struct asrc_buffer) +#define ASRC_START_CONV _IOW(ASRC_IOC_MAGIC, 8, enum asrc_pair_index) +#define ASRC_STOP_CONV _IOW(ASRC_IOC_MAGIC, 9, enum asrc_pair_index) +#define ASRC_STATUS _IOW(ASRC_IOC_MAGIC, 10, struct asrc_status_flags) +#define ASRC_FLUSH _IOW(ASRC_IOC_MAGIC, 11, enum asrc_pair_index) + +enum asrc_pair_index { + ASRC_PAIR_A, + ASRC_PAIR_B, + ASRC_PAIR_C +}; + +enum asrc_inclk { + INCLK_NONE = 0x03, + INCLK_ESAI_RX = 0x00, + INCLK_SSI1_RX = 0x01, + INCLK_SSI2_RX = 0x02, + INCLK_SPDIF_RX = 0x04, + INCLK_MLB_CLK = 0x05, + INCLK_ESAI_TX = 0x08, + INCLK_SSI1_TX = 0x09, + INCLK_SSI2_TX = 0x0a, + INCLK_SPDIF_TX = 0x0c, + INCLK_ASRCK1_CLK = 0x0f, +}; + +enum asrc_outclk { + OUTCLK_NONE = 0x03, + OUTCLK_ESAI_TX = 0x00, + OUTCLK_SSI1_TX = 0x01, + OUTCLK_SSI2_TX = 0x02, + OUTCLK_SPDIF_TX = 0x04, + OUTCLK_MLB_CLK = 0x05, + OUTCLK_ESAI_RX = 0x08, + OUTCLK_SSI1_RX = 0x09, + OUTCLK_SSI2_RX = 0x0a, + OUTCLK_SPDIF_RX = 0x0c, + OUTCLK_ASRCK1_CLK = 0x0f, +}; + +struct asrc_config { + enum asrc_pair_index pair; + unsigned int channel_num; + unsigned int buffer_num; + unsigned int dma_buffer_size; + unsigned int input_sample_rate; + unsigned int output_sample_rate; + unsigned int word_width; + enum asrc_inclk inclk; + enum asrc_outclk outclk; +}; + +struct asrc_pair { + unsigned int start_channel; + unsigned int chn_num; + unsigned int chn_max; + unsigned int active; + unsigned int overload_error; +}; + +struct asrc_req { + unsigned int chn_num; + enum asrc_pair_index index; +}; + +struct asrc_querybuf { + unsigned int buffer_index; + unsigned int input_length; + unsigned int output_length; + unsigned long input_offset; + unsigned long output_offset; +}; + +struct asrc_buffer { + unsigned int index; + unsigned int length; + int buf_valid; +}; + +struct asrc_status_flags { + enum asrc_pair_index index; + unsigned int overload_error; +}; + +#define ASRC_BUF_NA -35 /* ASRC DQ's buffer is NOT available */ +#define ASRC_BUF_AV 35 /* ASRC DQ's buffer is available */ +enum asrc_error_status { + ASRC_TASK_Q_OVERLOAD = 0x01, + ASRC_OUTPUT_TASK_OVERLOAD = 0x02, + ASRC_INPUT_TASK_OVERLOAD = 0x04, + ASRC_OUTPUT_BUFFER_OVERFLOW = 0x08, + ASRC_INPUT_BUFFER_UNDERRUN = 0x10, +}; + +#ifdef __KERNEL__ + +#define ASRC_DMA_BUFFER_NUM 8 + +#define ASRC_ASRCTR_REG 0x00 +#define ASRC_ASRIER_REG 0x04 +#define ASRC_ASRCNCR_REG 0x0C +#define ASRC_ASRCFG_REG 0x10 +#define ASRC_ASRCSR_REG 0x14 +#define ASRC_ASRCDR1_REG 0x18 +#define ASRC_ASRCDR2_REG 0x1C +#define ASRC_ASRSTR_REG 0x20 +#define ASRC_ASRRA_REG 0x24 +#define ASRC_ASRRB_REG 0x28 +#define ASRC_ASRRC_REG 0x2C +#define ASRC_ASRPM1_REG 0x40 +#define ASRC_ASRPM2_REG 0x44 +#define ASRC_ASRPM3_REG 0x48 +#define ASRC_ASRPM4_REG 0x4C +#define ASRC_ASRPM5_REG 0x50 +#define ASRC_ASRTFR1 0x54 +#define ASRC_ASRCCR_REG 0x5C +#define ASRC_ASRDIA_REG 0x60 +#define ASRC_ASRDOA_REG 0x64 +#define ASRC_ASRDIB_REG 0x68 +#define ASRC_ASRDOB_REG 0x6C +#define ASRC_ASRDIC_REG 0x70 +#define ASRC_ASRDOC_REG 0x74 +#define ASRC_ASRIDRHA_REG 0x80 +#define ASRC_ASRIDRLA_REG 0x84 +#define ASRC_ASRIDRHB_REG 0x88 +#define ASRC_ASRIDRLB_REG 0x8C +#define ASRC_ASRIDRHC_REG 0x90 +#define ASRC_ASRIDRLC_REG 0x94 +#define ASRC_ASR76K_REG 0x98 +#define ASRC_ASR56K_REG 0x9C + +struct dma_block { + unsigned int index; + unsigned int length; + unsigned char *dma_vaddr; + dma_addr_t dma_paddr; + struct list_head queue; +}; + +struct asrc_pair_params { + enum asrc_pair_index index; + struct list_head input_queue; + struct list_head input_done_queue; + struct list_head output_queue; + struct list_head output_done_queue; + wait_queue_head_t input_wait_queue; + wait_queue_head_t output_wait_queue; + unsigned int input_counter; + unsigned int output_counter; + unsigned int input_queue_empty; + unsigned int output_queue_empty; + unsigned int input_dma_channel; + unsigned int output_dma_channel; + unsigned int input_buffer_size; + unsigned int output_buffer_size; + unsigned int buffer_num; + unsigned int pair_hold; + unsigned int asrc_active; + struct dma_block input_dma[ASRC_DMA_BUFFER_NUM]; + struct dma_block output_dma[ASRC_DMA_BUFFER_NUM]; + struct semaphore busy_lock; +}; + +struct asrc_data { + struct asrc_pair asrc_pair[3]; +}; + +extern int asrc_req_pair(int chn_num, enum asrc_pair_index *index); +extern void asrc_release_pair(enum asrc_pair_index index); +extern int asrc_config_pair(struct asrc_config *config); +extern void asrc_get_status(struct asrc_status_flags *flags); +extern void asrc_start_conv(enum asrc_pair_index index); +extern void asrc_stop_conv(enum asrc_pair_index index); + +#endif /* __kERNEL__ */ + +#endif /* __MXC_ASRC_H__ */ diff --git a/include/linux/mxc_mlb.h b/include/linux/mxc_mlb.h new file mode 100644 index 000000000000..7c8afea2f64d --- /dev/null +++ b/include/linux/mxc_mlb.h @@ -0,0 +1,51 @@ +/* + * mxc_mlb.h + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef _MXC_MLB_H +#define _MXC_MLB_H + +/* define IOCTL command */ +#define MLB_SET_FPS _IOW('S', 0x10, unsigned int) +#define MLB_GET_VER _IOR('S', 0x11, unsigned long) +#define MLB_SET_DEVADDR _IOR('S', 0x12, unsigned char) +/*! + * set channel address for each logical channel + * the MSB 16bits is for tx channel, the left LSB is for rx channel + */ +#define MLB_CHAN_SETADDR _IOW('S', 0x13, unsigned int) +#define MLB_CHAN_STARTUP _IO('S', 0x14) +#define MLB_CHAN_SHUTDOWN _IO('S', 0x15) +#define MLB_CHAN_GETEVENT _IOR('S', 0x16, unsigned long) + +/*! + * MLB event define + */ +enum { + MLB_EVT_TX_PROTO_ERR_CUR = 1 << 0, + MLB_EVT_TX_BRK_DETECT_CUR = 1 << 1, + MLB_EVT_TX_PROTO_ERR_PREV = 1 << 8, + MLB_EVT_TX_BRK_DETECT_PREV = 1 << 9, + MLB_EVT_RX_PROTO_ERR_CUR = 1 << 16, + MLB_EVT_RX_BRK_DETECT_CUR = 1 << 17, + MLB_EVT_RX_PROTO_ERR_PREV = 1 << 24, + MLB_EVT_RX_BRK_DETECT_PREV = 1 << 25, +}; + +#ifdef __KERNEL__ +extern void gpio_mlb_active(void); +extern void gpio_mlb_inactive(void); +#endif + +#endif /* _MXC_MLB_H */ diff --git a/include/linux/mxc_pf.h b/include/linux/mxc_pf.h new file mode 100644 index 000000000000..9daf853a74a0 --- /dev/null +++ b/include/linux/mxc_pf.h @@ -0,0 +1,125 @@ +/* + * Copyright 2005-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU Lesser General + * Public License. You may obtain a copy of the GNU Lesser General + * Public License Version 2.1 or later at the following locations: + * + * http://www.opensource.org/licenses/lgpl-license.html + * http://www.gnu.org/copyleft/lgpl.html + */ + +/*! + * @defgroup MXC_PF MPEG4/H.264 Post Filter Driver + */ +/*! + * @file arch-mxc/mxc_pf.h + * + * @brief MXC IPU MPEG4/H.264 Post-filtering driver + * + * User-level API for IPU Hardware MPEG4/H.264 Post-filtering. + * + * @ingroup MXC_PF + */ +#ifndef __INCLUDED_MXC_PF_H__ +#define __INCLUDED_MXC_PF_H__ + +#define PF_MAX_BUFFER_CNT 17 + +#define PF_WAIT_Y 0x0001 +#define PF_WAIT_U 0x0002 +#define PF_WAIT_V 0x0004 +#define PF_WAIT_ALL (PF_WAIT_Y|PF_WAIT_U|PF_WAIT_V) + +/*! + * Structure for Post Filter initialization parameters. + */ +typedef struct { + uint16_t pf_mode; /*!< Post filter operation mode */ + uint16_t width; /*!< Width of frame in pixels */ + uint16_t height; /*!< Height of frame in pixels */ + uint16_t stride; /*!< Stride of Y plane in pixels. Stride for U and V planes is half Y stride */ + uint32_t qp_size; + unsigned long qp_paddr; +} pf_init_params; + +/*! + * Structure for Post Filter buffer request parameters. + */ +typedef struct { + int count; /*!< Number of buffers requested */ + __u32 req_size; +} pf_reqbufs_params; + +/*! + * Structure for Post Filter buffer request parameters. + */ +typedef struct { + int index; + int size; /*!< Size of buffer allocated */ + __u32 offset; /*!< Buffer offset in driver memory. Set by QUERYBUF */ + __u32 y_offset; /*!< Optional starting relative offset of Y data + from beginning of buffer. Set to 0 to use default + calculated based on height and stride */ + __u32 u_offset; /*!< Optional starting relative offset of U data + from beginning of buffer. Set to 0 to use default + calculated based on height and stride */ + __u32 v_offset; /*!< Optional starting relative offset of V data + from beginning of buffer. Set to 0 to use default + calculated based on height and stride */ +} pf_buf; + +/*! + * Structure for Post Filter start parameters. + */ +typedef struct { + pf_buf in; /*!< Input buffer address and offsets */ + pf_buf out; /*!< Output buffer address and offsets */ + int qp_buf; + int wait; + uint32_t h264_pause_row; /*!< Row to pause at for H.264 mode. 0 to disable pause */ +} pf_start_params; + +/*! @name User Client Ioctl Interface */ +/*! @{ */ + +/*! + * IOCTL to Initialize the Post Filter. + */ +#define PF_IOCTL_INIT _IOW('F', 0x0, pf_init_params) + +/*! + * IOCTL to Uninitialize the Post Filter. + */ +#define PF_IOCTL_UNINIT _IO('F', 0x1) + +/*! + * IOCTL to set the buffer mode and allocate buffers if driver allocated. + */ +#define PF_IOCTL_REQBUFS _IOWR('F', 0x2, pf_reqbufs_params) + +/*! + * IOCTL to set the buffer mode and allocate buffers if driver allocated. + */ +#define PF_IOCTL_QUERYBUF _IOR('F', 0x2, pf_buf) + +/*! + * IOCTL to start post filtering on a frame of data. This ioctl may block until + * processing is done or return immediately. + */ +#define PF_IOCTL_START _IOWR('F', 0x3, pf_start_params) + +/*! + * IOCTL to resume post-filtering after an intra frame pause in H.264 mode. + */ +#define PF_IOCTL_RESUME _IOW('F', 0x4, int) + +/*! + * IOCTL to wait for post-filtering to complete. + */ +#define PF_IOCTL_WAIT _IOW('F', 0x5, int) +/*! @} */ + +#endif /* __INCLUDED_MXC_PF_H__ */ diff --git a/include/linux/mxc_scc2_driver.h b/include/linux/mxc_scc2_driver.h new file mode 100644 index 000000000000..4a32d628b062 --- /dev/null +++ b/include/linux/mxc_scc2_driver.h @@ -0,0 +1,975 @@ + +/* + * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef SCC_DRIVER_H +#define SCC_DRIVER_H + +/* + * NAMING CONVENTIONS + * ================== + * (A note to maintainers and other interested parties) + * + * Use scc_ or SCC_ prefix for 'high-level' interface routines and the types + * passed to those routines. Try to avoid #defines in these interfaces. + * + * Use SMN_ or SCM_ prefix for the #defines used with scc_read_register() and + * scc_write_register, or values passed/retrieved from those routines. + */ + +/*! @file mxc_scc2_driver.h + * + * @brief (Header file to use the SCC2 driver.) + * + * The SCC2 driver is available to other kernel modules directly. Secure + * Partition functionality is extended to users through the SHW API. Other + * functionality of the SCC2 is limited to kernel-space users. + * + * With the exception of #scc_monitor_security_failure(), all routines are + * 'synchronous', i.e. they will not return to their caller until the requested + * action is complete, or fails to complete. Some of these functions could + * take quite a while to perform, depending upon the request. + * + * Routines are provided to: + * @li trigger a security-violation alarm - #scc_set_sw_alarm() + * @li get configuration and version information - #scc_get_configuration() + * @li zeroize memory - #scc_zeroize_memories() + * @li Work with secure partitions: #scc_allocate_partition() + * #scc_engage_partition() #scc_diminish_permissions() + * #scc_release_partition() + * @li Encrypt or decrypt regions of data: #scc_encrypt_region() + * #scc_decrypt_region() + * @li monitor the Security Failure alarm - #scc_monitor_security_failure() + * @li stop monitoring Security Failure alarm - + * #scc_stop_monitoring_security_failure() + * @li write registers of the SCC - #scc_write_register() + * @li read registers of the SCC - #scc_read_register() + * + * The SCC2 encrypts and decrypts using Triple DES with an internally stored + * key. When the SCC2 is in Secure mode, it uses its secret, unique-per-chip + * key. When it is in Non-Secure mode, it uses a default key. This ensures + * that secrets stay secret if the SCC2 is not in Secure mode. + * + * Not all functions that could be provided in a 'high level' manner have been + * implemented. Among the missing are interfaces to the ASC/AIC components and + * the timer functions. These and other features must be accessed through + * #scc_read_register() and #scc_write_register(), using the @c \#define values + * provided. + * + * Here is a glossary of acronyms used in the SCC2 driver documentation: + * - CBC - Cipher Block Chaining. A method of performing a block cipher. + * Each block is encrypted using some part of the result of the previous + * block's encryption. It needs an 'initialization vector' to seed the + * operation. + * - ECB - Electronic Code Book. A method of performing a block cipher. + * With a given key, a given block will always encrypt to the same value. + * - DES - Data Encryption Standard. (8-byte) Block cipher algorithm which + * uses 56-bit keys. In SCC2, this key is constant and unique to the device. + * SCC uses the "triple DES" form of this algorithm. + * - AIC - Algorithm Integrity Checker. + * - ASC - Algorithm Sequence Checker. + * - SMN - Security Monitor. The part of the SCC2 responsible for monitoring + * for security problems and notifying the CPU and other PISA components. + * - SCM - Secure Memory. The part of the SCC2 which handles the cryptography. + * - SCC - Security Controller. Central security mechanism for PISA. + * - PISA - Platform-Independent Security Architecture. + */ + +/* Temporarily define compile-time flags to make Doxygen happy. */ +#ifdef DOXYGEN_HACK +/** @defgroup scccompileflags SCC Driver compile-time flags + * + * These preprocessor flags should be set, if desired, in a makefile so + * that they show up on the compiler command line. + */ +/** @addtogroup scccompileflags */ + +/** @{ */ +/** + * Compile-time flag to change @ref smnregs and @ref scmregs + * offset values for the SCC's implementation on the MX.21 board. + * + * This must also be set properly for any code which calls the + * scc_read_register() or scc_write_register() functions or references the + * register offsets. + */ +#define TAHITI +/** @} */ +#undef TAHITI + +#endif /* DOXYGEN_HACK */ + +/*! Major Version of the driver. Used for + scc_configuration->driver_major_version */ +#define SCC_DRIVER_MAJOR_VERSION 2 +/*! Old Minor Version of the driver. */ +#define SCC_DRIVER_MINOR_VERSION_0 0 +/*! Minor Version of the driver. Used for + scc_configuration->driver_minor_version */ +#define SCC_DRIVER_MINOR_VERSION_2 2 + + +/*! + * Interrupt line number of SCM interrupt. + */ +#define INT_SCC_SCM MXC_INT_SCC_SCM + +/*! + * Interrupt line number of the SMN interrupt. + */ +#define INT_SCC_SMN MXC_INT_SCC_SMN + +/** + * @typedef scc_return_t + */ +/** Common status return values from SCC driver functions. */ + typedef enum scc_return_t { + SCC_RET_OK = 0, /**< Function succeeded */ + SCC_RET_FAIL, /**< Non-specific failure */ + SCC_RET_VERIFICATION_FAILED, + /**< Decrypt validation failed */ + SCC_RET_TOO_MANY_FUNCTIONS, + /**< At maximum registered functions */ + SCC_RET_BUSY, /**< SCC is busy and cannot handle request */ + /**< Encryption or decryption failed because@c count_out_bytes + says that @c data_out is too small to hold the value. */ + SCC_RET_INSUFFICIENT_SPACE, + } scc_return_t; + +/** + * @typedef scc_partition_status_t + */ +/** Partition status information. */ + typedef enum scc_partition_status_t { + SCC_PART_S_UNUSABLE, + /**< Partition not implemented */ + SCC_PART_S_UNAVAILABLE, + /**< Partition owned by other host */ + SCC_PART_S_AVAILABLE, + /**< Partition available */ + SCC_PART_S_ALLOCATED, + /**< Partition owned by host but not engaged*/ + SCC_PART_S_ENGAGED, + /**< Partition owned by host and engaged */ + } scc_partition_status_t; + +/** + * Configuration information about SCC and the driver. + * + * This struct/typedef contains information from the SCC and the driver to + * allow the user of the driver to determine the size of the SCC's memories and + * the version of the SCC and the driver. + */ + typedef struct scc_config_t { + int driver_major_version; + /**< Major version of the SCC driver code */ + int driver_minor_version; + /**< Minor version of the SCC driver code */ + int scm_version; /**< Version from SCM Configuration register */ + int smn_version; /**< Version from SMN Status register */ + /**< Number of bytes per block of RAM; also + block size of the crypto algorithm. */ + int block_size_bytes; + int partition_size_bytes; + /**< Number of bytes in each partition */ + int partition_count; + /**< Number of partitions on this platform */ + } scc_config_t; + +/** + * @typedef scc_enc_dec_t + */ +/** + * Determine whether SCC will run its cryptographic + * function as an encryption or decryption. + */ + typedef enum scc_enc_dec_t { + SCC_ENCRYPT, /**< Encrypt (from Red to Black) */ + SCC_DECRYPT /**< Decrypt (from Black to Red) */ + } scc_enc_dec_t; + +/** + * @typedef scc_verify_t + */ +/** + * Tell the driver whether it is responsible for verifying the integrity of a + * secret. During an encryption, using other than #SCC_VERIFY_MODE_NONE will + * cause a check value to be generated and appended to the plaintext before + * encryption. During decryption, the check value will be verified after + * decryption, and then stripped from the message. + */ + typedef enum scc_verify_t { + /** No verification value added or checked. Input plaintext data must be + * be a multiple of the blocksize (#scc_get_configuration()). */ + SCC_VERIFY_MODE_NONE, + /** Driver will generate/validate a 2-byte CCITT CRC. Input plaintext + will be padded to a multiple of the blocksize, adding 3-10 bytes + to the resulting output ciphertext. Upon decryption, this padding + will be stripped, and the CRC will be verified. */ + SCC_VERIFY_MODE_CCITT_CRC + } scc_verify_t; + +/** + * @typedef scc_cypher_mode_t + */ +/** + * Select the cypher mode to use for partition cover/uncover operations. + */ + + typedef enum scc_cypher_mode_t { + SCC_CYPHER_MODE_ECB = 1, + /**< ECB mode */ + SCC_CYPHER_MODE_CBC = 2, + /**< CBC mode */ + } scc_cypher_mode_t; + +/** + * Allocate a partition of secure memory + * + * @param smid_value Value to use for the SMID register. Must be 0 for + * kernel mode ownership. + * @param[out] part_no (If successful) Assigned partition number. + * @param[out] part_base Kernel virtual address of the partition. + * @param[out] part_phys Physical address of the partition. + * + * @return SCC_RET_OK if successful. + */ + extern scc_return_t + scc_allocate_partition(uint32_t smid_value, + int *part_no, + void **part_base, uint32_t *part_phys); + +/* Note: This function has to be run in the same context (userspace or kernel + * mode) as the process that will be using the partition. Because the SCC2 API + * is not accessible in user mode, this function is also provided as a macro in + * in fsl_shw.h. Kernel-mode users that include this file are able to use this + * version of the function without having to include the whole SHW API. If the + * macro definition was defined before we got here, un-define it so this + * version will be used instead. + */ + +#ifdef scc_engage_partition +#undef scc_engage_partition +#endif + +/** + * Engage partition of secure memory + * + * @param part_base (kernel) Virtual + * @param UMID NULL, or 16-byte UMID for partition security + * @param permissions ORed values of the type SCM_PERM_* which will be used as + * initial partition permissions. SHW API users should use + * the FSL_PERM_* definitions instead. + * + * @return SCC_RET_OK if successful. + */ + extern scc_return_t + scc_engage_partition(void *part_base, + const uint8_t *UMID, uint32_t permissions); + +/** + * Release a partition of secure memory + * + * @param part_base Kernel virtual address of the partition to be released. + * + * @return SCC_RET_OK if successful. + */ + extern scc_return_t scc_release_partition(void *part_base); + +/** + * Diminish the permissions on a partition of secure memory + * + * @param part_base Kernel virtual address of the partition. + * + * @param permissions ORed values of the type SCM_PERM_* which will be used as + * initial partition permissions. SHW API users should use + * the FSL_PERM_* definitions instead. + * + * @return SCC_RET_OK if successful. + */ + extern scc_return_t + scc_diminish_permissions(void *part_base, uint32_t permissions); + +/** + * Query the status of a partition of secure memory + * + * @param part_base Kernel virtual address of the partition. + * + * @return SCC_RET_OK if successful. + */ + extern scc_partition_status_t scc_partition_status(void *part_base); + +/** + * Calculate the physical address from the kernel virtual address. + */ + extern uint32_t scc_virt_to_phys(void *address); +/*scc_return_t +scc_verify_slot_access(uint64_t owner_id, uint32_t slot, uint32_t access_len);*/ + + +/** + * Encrypt a region of secure memory. + * + * @param part_base Kernel virtual address of the partition. + * @param offset_bytes Offset from the start of the partition to the plaintext + * data. + * @param byte_count Length of the region (octets). + * @param black_data Physical location to store the encrypted data. + * @param IV Value to use for the Initialization Vector. + * @param cypher_mode Cyphering mode to use, specified by type + * #scc_cypher_mode_t + * + * @return SCC_RET_OK if successful. + */ + extern scc_return_t + scc_encrypt_region(uint32_t part_base, uint32_t offset_bytes, + uint32_t byte_count, uint8_t *black_data, + uint32_t *IV, scc_cypher_mode_t cypher_mode); + +/** + * Decrypt a region into secure memory + * + * @param part_base Kernel virtual address of the partition. + * @param offset_bytes Offset from the start of the partition to store the + * plaintext data. + * @param byte_count Length of the region (octets). + * @param black_data Physical location of the encrypted data. + * @param IV Value to use for the Initialization Vector. + * @param cypher_mode Cyphering mode to use, specified by type + * #scc_cypher_mode_t + * + * @return SCC_RET_OK if successful. + */ + extern scc_return_t + scc_decrypt_region(uint32_t part_base, uint32_t offset_bytes, + uint32_t byte_count, uint8_t *black_data, + uint32_t *IV, scc_cypher_mode_t cypher_mode); + +/** + * Retrieve configuration information from the SCC. + * + * This function always succeeds. + * + * @return A pointer to the configuration information. This is a pointer to + * static memory and must not be freed. The values never change, and + * the return value will never be null. + */ + extern scc_config_t *scc_get_configuration(void); + +/** + * Zeroize Red and Black memories of the SCC. This will start the Zeroizing + * process. The routine will return when the memories have zeroized or failed + * to do so. The driver will poll waiting for this to occur, so this + * routine must not be called from interrupt level. Some future version of + * driver may elect instead to sleep. + * + * @return 0 or error if initialization fails. + */ + extern scc_return_t scc_zeroize_memories(void); + +/** + * Signal a software alarm to the SCC. This will take the SCC and other PISA + * parts out of Secure mode and into Security Failure mode. The SCC will stay + * in failed mode until a reboot. + * + * @internal + * If the SCC is not already in fail state, simply write the + * #SMN_COMMAND_SET_SOFTWARE_ALARM bit in #SMN_COMMAND_REG. Since there is no + * reason to wait for the interrupt to bounce back, simply act as though + * one did. + */ + extern void scc_set_sw_alarm(void); + +/** + * This routine will register a function to be called should a Security Failure + * be signalled by the SCC (Security Monitor). + * + * The callback function may be called from interrupt level, it may be called + * from some process' task. It should therefore not take a long time to + * perform its operation, and it may not sleep. + * + * @param callback_func Function pointer to routine which will receive + * notification of the security failure. + * @return 0 if function was successfully registered, non-zero on + * failure. See #scc_return_t. + * + * @internal + * There is a fixed global static array which keeps track of the requests to + * monitor the failure. + * + * Add @c callback_func to the first empty slot in #scc_callbacks[]. If there + * is no room, return #SCC_RET_TOO_MANY_FUNCTIONS. + */ + extern scc_return_t scc_monitor_security_failure(void + callback_func(void)); + +/** + * This routine will deregister a function previously registered with + * #scc_monitor_security_failure(). + * + * @param callback_func Function pointer to routine previously registered with + * #scc_stop_monitoring_security_failure(). + */ + extern void scc_stop_monitoring_security_failure(void + callback_func(void)); + +/** + * Read value from an SCC register. + * The offset will be checked for validity (range) as well as whether it is + * accessible (e.g. not busy, not in failed state) at the time of the call. + * + * @param[in] register_offset The (byte) offset within the SCC block + * of the register to be queried. See + * @ref scmregs and @ref smnregs. + * @param[out] value Pointer to where value from the register + * should be placed. + * @return 0 if OK, non-zero on error. See #scc_return_t. + * + * @internal + * Verify that the register_offset is a) valid, b) refers to a readable + * register, and c) the SCC is in a state which would allow a read of this + * register. + */ + extern scc_return_t scc_read_register(int register_offset, + uint32_t *value); + +/** + * Write a new value into an SCC register. + * The offset will be checked for validity (range) as well as whether it is + * accessible (e.g. not busy, not in failed state) at the time of the call. + * + * @param[in] register_offset The (byte) offset within the SCC block + * of the register to be modified. See + * @ref scmregs and @ref smnregs + * @param[in] value The value to store into the register. + * @return 0 if OK, non-zero on error. See #scc_return_t. + * + * @internal + * Verify that the register_offset is a) valid, b) refers to a writeable + * register, and c) the SCC is in a state which would allow a write to this + * register. + */ + extern scc_return_t scc_write_register(int register_offset, + uint32_t value); + +/** + * @defgroup scmregs SCM Registers + * + * These values are offsets into the SCC for the Secure Memory + * (SCM) registers. They are used in the @c register_offset parameter of + * #scc_read_register() and #scc_write_register(). + */ +/** @addtogroup scmregs */ +/** @{ */ +/** Offset of SCM Version ID Register */ +#define SCM_VERSION_REG 0x000 +/** Offset of SCM Interrupt Control Register */ +#define SCM_INT_CTL_REG 0x008 +/** Offset of SCM Status Register */ +#define SCM_STATUS_REG 0x00c +/** Offset of SCM Error Status Register */ +#define SCM_ERR_STATUS_REG 0x010 +/** Offset of SCM Fault Address Register */ +#define SCM_FAULT_ADR_REG 0x014 +/** Offset of SCM Partition Owners Register */ +#define SCM_PART_OWNERS_REG 0x018 +/** Offset of SCM Partitions Engaged Register */ +#define SCM_PART_ENGAGED_REG 0x01c +/** Offset of SCM Unique Number 0 Register */ +#define SCM_UNIQUE_ID0_REG 0x020 +/** Offset of SCM Unique Number 1 Register */ +#define SCM_UNIQUE_ID1_REG 0x024 +/** Offset of SCM Unique Number 2 Register */ +#define SCM_UNIQUE_ID2_REG 0x028 +/** Offset of SCM Unique Number 3 Register */ +#define SCM_UNIQUE_ID3_REG 0x02c +/** Offset of SCM Zeroize Command Register */ +#define SCM_ZCMD_REG 0x050 +/** Offset of SCM Cipher Command Register */ +#define SCM_CCMD_REG 0x054 +/** Offset of SCM Cipher Black RAM Start Address Register */ +#define SCM_C_BLACK_ST_REG 0x058 +/** Offset of SCM Internal Debug Register */ +#define SCM_DBG_STATUS_REG 0x05c +/** Offset of SCM Cipher IV 0 Register */ +#define SCM_AES_CBC_IV0_REG 0x060 +/** Offset of SCM Cipher IV 1 Register */ +#define SCM_AES_CBC_IV1_REG 0x064 +/** Offset of SCM Cipher IV 2 Register */ +#define SCM_AES_CBC_IV2_REG 0x068 +/** Offset of SCM Cipher IV 3 Register */ +#define SCM_AES_CBC_IV3_REG 0x06c +/** Offset of SCM SMID Partition 0 Register */ +#define SCM_SMID0_REG 0x080 +/** Offset of SCM Partition 0 Access Permissions Register */ +#define SCM_ACC0_REG 0x084 +/** Offset of SCM SMID Partition 1 Register */ +#define SCM_SMID1_REG 0x088 +/** Offset of SCM Partition 1 Access Permissions Register */ +#define SCM_ACC1_REG 0x08c +/** Offset of SCM SMID Partition 2 Register */ +#define SCM_SMID2_REG 0x090 +/** Offset of SCM Partition 2 Access Permissions Register */ +#define SCM_ACC2_REG 0x094 +/** Offset of SCM SMID Partition 3 Register */ +#define SCM_SMID3_REG 0x098 +/** Offset of SCM Partition 3 Access Permissions Register */ +#define SCM_ACC3_REG 0x09c +/** Offset of SCM SMID Partition 4 Register */ +#define SCM_SMID4_REG 0x0a0 +/** Offset of SCM Partition 4 Access Permissions Register */ +#define SCM_ACC4_REG 0x0a4 +/** Offset of SCM SMID Partition 5 Register */ +#define SCM_SMID5_REG 0x0a8 +/** Offset of SCM Partition 5 Access Permissions Register */ +#define SCM_ACC5_REG 0x0ac +/** Offset of SCM SMID Partition 6 Register */ +#define SCM_SMID6_REG 0x0b0 +/** Offset of SCM Partition 6 Access Permissions Register */ +#define SCM_ACC6_REG 0x0b4 +/** Offset of SCM SMID Partition 7 Register */ +#define SCM_SMID7_REG 0x0b8 +/** Offset of SCM Partition 7 Access Permissions Register */ +#define SCM_ACC7_REG 0x0bc +/** Offset of SCM SMID Partition 8 Register */ +#define SCM_SMID8_REG 0x0c0 +/** Offset of SCM Partition 8 Access Permissions Register */ +#define SCM_ACC8_REG 0x0c4 +/** Offset of SCM SMID Partition 9 Register */ +#define SCM_SMID9_REG 0x0c8 +/** Offset of SCM Partition 9 Access Permissions Register */ +#define SCM_ACC9_REG 0x0cc +/** Offset of SCM SMID Partition 10 Register */ +#define SCM_SMID10_REG 0x0d0 +/** Offset of SCM Partition 10 Access Permissions Register */ +#define SCM_ACC10_REG 0x0d4 +/** Offset of SCM SMID Partition 11 Register */ +#define SCM_SMID11_REG 0x0d8 +/** Offset of SCM Partition 11 Access Permissions Register */ +#define SCM_ACC11_REG 0x0dc +/** Offset of SCM SMID Partition 12 Register */ +#define SCM_SMID12_REG 0x0e0 +/** Offset of SCM Partition 12 Access Permissions Register */ +#define SCM_ACC12_REG 0x0e4 +/** Offset of SCM SMID Partition 13 Register */ +#define SCM_SMID13_REG 0x0e8 +/** Offset of SCM Partition 13 Access Permissions Register */ +#define SCM_ACC13_REG 0x0ec +/** Offset of SCM SMID Partition 14 Register */ +#define SCM_SMID14_REG 0x0f0 +/** Offset of SCM Partition 14 Access Permissions Register */ +#define SCM_ACC14_REG 0x0f4 +/** Offset of SCM SMID Partition 15 Register */ +#define SCM_SMID15_REG 0x0f8 +/** Offset of SCM Partition 15 Access Permissions Register */ +#define SCM_ACC15_REG 0x0fc +/** @} */ + +/** Number of bytes of register space for the SCM. */ +#define SCM_REG_BANK_SIZE 0x100 + +/** Number of bytes of register space for the SCM. */ +#define SCM_REG_BANK_SIZE 0x100 + +/** Offset of the SMN registers */ +#define SMN_ADDR_OFFSET 0x100 + +/** + * @defgroup smnregs SMN Registers + * + * These values are offsets into the SCC for the Security Monitor + * (SMN) registers. They are used in the @c register_offset parameter of the + * #scc_read_register() and #scc_write_register(). + */ +/** @addtogroup smnregs */ +/** @{ */ +/** Offset of SMN Status Register */ +#define SMN_STATUS_REG (SMN_ADDR_OFFSET+0x00000000) +/** Offset of SMH Command Register */ +#define SMN_COMMAND_REG (SMN_ADDR_OFFSET+0x00000004) +/** Offset of SMH Sequence Start Register */ +#define SMN_SEQ_START_REG (SMN_ADDR_OFFSET+0x00000008) +/** Offset of SMH Sequence End Register */ +#define SMN_SEQ_END_REG (SMN_ADDR_OFFSET+0x0000000c) +/** Offset of SMH Sequence Check Register */ +#define SMN_SEQ_CHECK_REG (SMN_ADDR_OFFSET+0x00000010) +/** Offset of SMH BitBank Count Register */ +#define SMN_BB_CNT_REG (SMN_ADDR_OFFSET+0x00000014) +/** Offset of SMH BitBank Increment Register */ +#define SMN_BB_INC_REG (SMN_ADDR_OFFSET+0x00000018) +/** Offset of SMH BitBank Decrement Register */ +#define SMN_BB_DEC_REG (SMN_ADDR_OFFSET+0x0000001c) +/** Offset of SMH Compare Register */ +#define SMN_COMPARE_REG (SMN_ADDR_OFFSET+0x00000020) +/** Offset of SMH Plaintext Check Register */ +#define SMN_PT_CHK_REG (SMN_ADDR_OFFSET+0x00000024) +/** Offset of SMH Ciphertext Check Register */ +#define SMN_CT_CHK_REG (SMN_ADDR_OFFSET+0x00000028) +/** Offset of SMH Timer Initial Value Register */ +#define SMN_TIMER_IV_REG (SMN_ADDR_OFFSET+0x0000002c) +/** Offset of SMH Timer Control Register */ +#define SMN_TIMER_CTL_REG (SMN_ADDR_OFFSET+0x00000030) +/** Offset of SMH Security Violation Register */ +#define SMN_SEC_VIO_REG (SMN_ADDR_OFFSET+0x00000034) +/** Offset of SMH Timer Register */ +#define SMN_TIMER_REG (SMN_ADDR_OFFSET+0x00000038) +/** Offset of SMH High-Assurance Control Register */ +#define SMN_HAC_REG (SMN_ADDR_OFFSET+0x0000003c) +/** Number of bytes allocated to the SMN registers */ +#define SMN_REG_BANK_SIZE 0x40 +/** @} */ + +/** Number of bytes of total register space for the SCC. */ +#define SCC_ADDRESS_RANGE (SMN_ADDR_OFFSET + SMN_REG_BANK_SIZE) + +/** + * @defgroup smnstatusregdefs SMN Status Register definitions (SMN_STATUS) + */ +/** @addtogroup smnstatusregdefs */ +/** @{ */ +/** SMN version id. */ +#define SMN_STATUS_VERSION_ID_MASK 0xfc000000 +/** number of bits to shift #SMN_STATUS_VERSION_ID_MASK to get it to LSB */ +#define SMN_STATUS_VERSION_ID_SHIFT 28 +/** Illegal bus master access attempted. */ +#define SMN_STATUS_ILLEGAL_MASTER 0x01000000 +/** Scan mode entered/exited since last reset. */ +#define SMN_STATUS_SCAN_EXIT 0x00800000 +/** Some security peripheral is initializing */ +#define SMN_STATUS_PERIP_INIT 0x00010000 +/** Internal error detected in SMN. */ +#define SMN_STATUS_SMN_ERROR 0x00004000 +/** SMN has an outstanding interrupt. */ +#define SMN_STATUS_SMN_STATUS_IRQ 0x00004000 +/** Software Alarm was triggered. */ +#define SMN_STATUS_SOFTWARE_ALARM 0x00002000 +/** Timer has expired. */ +#define SMN_STATUS_TIMER_ERROR 0x00001000 +/** Plaintext/Ciphertext compare failed. */ +#define SMN_STATUS_PC_ERROR 0x00000800 +/** Bit Bank detected overflow or underflow */ +#define SMN_STATUS_BITBANK_ERROR 0x00000400 +/** Algorithm Sequence Check failed. */ +#define SMN_STATUS_ASC_ERROR 0x00000200 +/** Security Policy Block detected error. */ +#define SMN_STATUS_SECURITY_POLICY_ERROR 0x00000100 +/** Security Violation Active error. */ +#define SMN_STATUS_SEC_VIO_ACTIVE_ERROR 0x00000080 +/** Processor booted from internal ROM. */ +#define SMN_STATUS_INTERNAL_BOOT 0x00000020 +/** SMN's internal state. */ +#define SMN_STATUS_STATE_MASK 0x0000001F +/** Number of bits to shift #SMN_STATUS_STATE_MASK to get it to LSB. */ +#define SMN_STATUS_STATE_SHIFT 0 +/** @} */ + +/** + * @defgroup sccscmstates SMN Model Secure State Controller States (SMN_STATE_MASK) + */ +/** @addtogroup sccscmstates */ +/** @{ */ +/** This is the first state of the SMN after power-on reset */ +#define SMN_STATE_START 0x0 +/** The SMN is zeroizing its RAM during reset */ +#define SMN_STATE_ZEROIZE_RAM 0x5 +/** SMN has passed internal checks, and is waiting for Software check-in */ +#define SMN_STATE_HEALTH_CHECK 0x6 +/** Fatal Security Violation. SMN is locked, SCM is inoperative. */ +#define SMN_STATE_FAIL 0x9 +/** SCC is in secure state. SCM is using secret key. */ +#define SMN_STATE_SECURE 0xA +/** Due to non-fatal error, device is not secure. SCM is using default key. */ +#define SMN_STATE_NON_SECURE 0xC +/** @} */ + +/** @{ */ +/** SCM Status bit: Key Status is Default Key in Use */ +#define SCM_STATUS_KST_DEFAULT_KEY 0x80000000 +/** SCM Status bit: Key Status is (reserved) */ +#define SCM_STATUS_KST_RESERVED1 0x40000000 +/** SCM Status bit: Key status is Wrong Key */ +#define SCM_STATUS_KST_WRONG_KEY 0x20000000 +/** SCM Status bit: Bad Key detected */ +#define SCM_STATUS_KST_BAD_KEY 0x10000000 +/** SCM Status bit: Error has occurred */ +#define SCM_STATUS_ERR 0x00008000 +/** SCM Status bit: Monitor State is Failed */ +#define SCM_STATUS_MSS_FAIL 0x00004000 +/** SCM Status bit: Monitor State is Secure */ +#define SCM_STATUS_MSS_SEC 0x00002000 +/** SCM Status bit: Secure Storage is Failed */ +#define SCM_STATUS_RSS_FAIL 0x00000400 +/** SCM Status bit: Secure Storage is Secure */ +#define SCM_STATUS_RSS_SEC 0x00000200 +/** SCM Status bit: Secure Storage is Initializing */ +#define SCM_STATUS_RSS_INIT 0x00000100 +/** SCM Status bit: Unique Number Valid */ +#define SCM_STATUS_UNV 0x00000080 +/** SCM Status bit: Big Endian mode */ +#define SCM_STATUS_BIG 0x00000040 +/** SCM Status bit: Using Secret Key */ +#define SCM_STATUS_USK 0x00000020 +/** SCM Status bit: Ram is being blocked */ +#define SCM_STATUS_BAR 0x00000010 +/** Bit mask of SRS */ +#define SCM_STATUS_SRS_MASK 0x0000000F +/** Number of bits to shift SRS to/from MSb */ +#define SCM_STATUS_SRS_SHIFT 0 +/** @} */ + +#define SCM_STATUS_SRS_RESET 0x0 /**< Reset, Zeroise All */ +#define SCM_STATUS_SRS_READY 0x1 /**< All Ready */ +#define SCM_STATUS_SRS_ZBUSY 0x2 /**< Zeroize Busy (Partition Only) */ +#define SCM_STATUS_SRS_CBUSY 0x3 /**< Cipher Busy */ +#define SCM_STATUS_SRS_ABUSY 0x4 /**< All Busy */ +#define SCM_STATUS_SRS_ZDONE 0x5 /**< Zeroize Done, Cipher Ready */ +#define SCM_STATUS_SRS_CDONE 0x6 /**< Cipher Done, Zeroize Ready */ +#define SCM_STATUS_SRS_ZDONE2 0x7 /**< Zeroize Done, Cipher Busy */ +#define SCM_STATUS_SRS_CDONE2 0x8 /**< Cipher Done, Zeroize Busy */ +#define SCM_STATUS_SRS_ADONE 0xD /**< All Done */ +#define SCM_STATUS_SRS_FAIL 0xF /**< Fail State */ + + +/* Format of the SCM VERSION ID REGISTER */ +#define SCM_VER_BPP_MASK 0xFF000000 /**< Bytes Per Partition Mask */ +#define SCM_VER_BPP_SHIFT 24 /**< Bytes Per Partition Shift */ +#define SCM_VER_BPCB_MASK 0x001F0000 /**< Bytes Per Cipher Block Mask */ +#define SCM_VER_BPCB_SHIFT 16 /**< Bytes Per Cipher Block Shift */ +#define SCM_VER_NP_MASK 0x0000F000 /**< Number of Partitions Mask */ +#define SCM_VER_NP_SHIFT 12 /**< Number of Partitions Shift */ +#define SCM_VER_MAJ_MASK 0x00000F00 /**< Major Version Mask */ +#define SCM_VER_MAJ_SHIFT 8 /**< Major Version Shift */ +#define SCM_VER_MIN_MASK 0x000000FF /**< Minor Version Mask */ +#define SCM_VER_MIN_SHIFT 0 /**< Minor Version Shift */ + +/**< SCC Hardware version supported by this driver */ +#define SCM_MAJOR_VERSION_2 2 + +/* Format of the SCM ERROR STATUS REGISTER */ +#define SCM_ERRSTAT_MID_MASK 0x00F00000 /**< Master ID Mask */ +#define SCM_ERRSTAT_MID_SHIFT 20 /**< Master ID Shift */ +#define SCM_ERRSTAT_ILM 0x00080000 /**< Illegal Master */ +#define SCM_ERRSTAT_SUP 0x00008000 /**< Supervisor Access */ +#define SCM_ERRSTAT_ERC_MASK 0x00000F00 /**< Error Code Mask */ +#define SCM_ERRSTAT_ERC_SHIFT 8 /**< Error Code Shift */ +#define SCM_ERRSTAT_SMS_MASK 0x000000F0 /**< Secure Monitor State Mask */ +#define SCM_ERRSTAT_SMS_SHIFT 4 /**< Secure Monitor State Shift */ +#define SCM_ERRSTAT_SRS_MASK 0x0000000F /**< Secure Ram State Mask */ +#define SCM_ERRSTAT_SRS_SHIFT 0 /**< Secure Ram State Shift */ + +/* SCM ERROR STATUS REGISTER ERROR CODES */ +#define SCM_ERCD_UNK_ADDR 0x1 /**< Unknown Address */ +#define SCM_ERCD_UNK_CMD 0x2 /**< Unknown Command */ +#define SCM_ERCD_READ_PERM 0x3 /**< Read Permission Error */ +#define SCM_ERCD_WRITE_PERM 0x4 /**< Write Permission Error */ +#define SCM_ERCD_DMA_ERROR 0x5 /**< DMA Error */ +#define SCM_ERCD_BLK_OVFL 0x6 /**< Encryption Block Length Overflow */ +#define SCM_ERCD_NO_KEY 0x7 /**< Key Not Engaged */ +#define SCM_ERCD_ZRZ_OVFL 0x8 /**< Zeroize Command Queue Overflow */ +#define SCM_ERCD_CPHR_OVFL 0x9 /**< Cipher Command Queue Overflow */ +#define SCM_ERCD_PROC_INTR 0xA /**< Process Interrupted */ +#define SCM_ERCD_WRNG_KEY 0xB /**< Wrong Key */ +#define SCM_ERCD_DEVICE_BUSY 0xC /**< Device Busy */ +#define SCM_ERCD_UNALGN_ADDR 0xD /**< DMA Unaligned Address */ + +/* Format of the CIPHER COMMAND REGISTER */ +#define SCM_CCMD_LENGTH_MASK 0xFFF00000 /**< Cipher Length Mask */ +#define SCM_CCMD_LENGTH_SHIFT 20 /**< Cipher Length Shift */ +#define SCM_CCMD_OFFSET_MASK 0x000FFF00 /**< Block Offset Mask */ +#define SCM_CCMD_OFFSET_SHIFT 8 /**< Block Offset Shift */ +#define SCM_CCMD_PART_MASK 0x000000F0 /**< Partition Number Mask */ +#define SCM_CCMD_PART_SHIFT 4 /**< Partition Number Shift */ +#define SCM_CCMD_CCMD_MASK 0x0000000F /**< Cipher Command Mask */ +#define SCM_CCMD_CCMD_SHIFT 0 /**< Cipher Command Shift */ + +/* Values for SCM_CCMD_CCMD field */ +#define SCM_CCMD_AES_DEC_ECB 1 /**< Decrypt without Chaining (ECB) */ +#define SCM_CCMD_AES_ENC_ECB 3 /**< Encrypt without Chaining (ECB) */ +#define SCM_CCMD_AES_DEC_CBC 5 /**< Decrypt with Chaining (CBC) */ +#define SCM_CCMD_AES_ENC_CBC 7 /**< Encrypt with Chaining (CBC) */ + +#define SCM_CCMD_AES 1 /**< Use AES Mode */ +#define SCM_CCMD_DEC 0 /**< Decrypt */ +#define SCM_CCMD_ENC 2 /**< Encrypt */ +#define SCM_CCMD_ECB 0 /**< Perform operation without chaining (ECB) */ +#define SCM_CCMD_CBC 4 /**< Perform operation with chaining (CBC) */ + +/* Format of the ZEROIZE COMMAND REGISTER */ +#define SCM_ZCMD_PART_MASK 0x000000F0 /**< Target Partition Mask */ +#define SCM_ZCMD_PART_SHIFT 4 /**< Target Partition Shift */ +#define SCM_ZCMD_CCMD_MASK 0x0000000F /**< Zeroize Command Mask */ +#define SCM_ZCMD_CCMD_SHIFT 0 /**< Zeroize Command Shift */ + +/* MASTER ACCESS PERMISSIONS REGISTER */ +/* Note that API users should use the FSL_PERM_ defines instead of these */ +/** SCM Access Permission: Do not zeroize/deallocate partition + on SMN Fail state */ +#define SCM_PERM_NO_ZEROIZE 0x10000000 +/** SCM Access Permission: Ignore Supervisor/User mode + in permission determination */ +#define SCM_PERM_HD_SUP_DISABLE 0x00000800 +/** SCM Access Permission: Allow Read Access to Host Domain */ +#define SCM_PERM_HD_READ 0x00000400 +/** SCM Access Permission: Allow Write Access to Host Domain */ +#define SCM_PERM_HD_WRITE 0x00000200 +/** SCM Access Permission: Allow Execute Access to Host Domain */ +#define SCM_PERM_HD_EXECUTE 0x00000100 +/** SCM Access Permission: Allow Read Access to Trusted Host Domain */ +#define SCM_PERM_TH_READ 0x00000040 +/** SCM Access Permission: Allow Write Access to Trusted Host Domain */ +#define SCM_PERM_TH_WRITE 0x00000020 +/** SCM Access Permission: Allow Read Access to Other/World Domain */ +#define SCM_PERM_OT_READ 0x00000004 +/** SCM Access Permission: Allow Write Access to Other/World Domain */ +#define SCM_PERM_OT_WRITE 0x00000002 +/** SCM Access Permission: Allow Execute Access to Other/World Domain */ +#define SCM_PERM_OT_EXECUTE 0x00000001 +/**< Valid bits that can be set in the Permissions register */ +#define SCM_PERM_MASK 0xC0000F67 + +/* Zeroize Command register definitions */ +#define ZCMD_DEALLOC_PART 3 /**< Deallocate Partition */ +#define Z_INT_EN 0x00000002 /**< Zero Interrupt Enable */ + +/** + * @defgroup scmpartitionownersregdefs SCM Partition Owners Register + */ +/** @addtogroup scmpartitionownersregdefs */ +/** @{ */ +/** Number of bits to shift partition number to get to its field. */ +#define SCM_POWN_SHIFT 2 +/** Mask for a field once the register has been shifted. */ +#define SCM_POWN_MASK 3 +/** Partition is free */ +#define SCM_POWN_PART_FREE 0 +/** Partition is unable to be allocated */ +#define SCM_POWN_PART_UNUSABLE 1 +/** Partition is owned by another master */ +#define SCM_POWN_PART_OTHER 2 +/** Partition is owned by this master */ +#define SCM_POWN_PART_OWNED 3 +/** @} */ + +/** + * @defgroup smnpartitionsengagedregdefs SCM Partitions Engaged Register + */ +/** @addtogroup smnpartitionsengagedregdefs */ +/** @{ */ +/** Number of bits to shift partition number to get to its field. */ +#define SCM_PENG_SHIFT 1 +/** Engaged value for a field once the register has been shifted. */ +#define SCM_PENG_ENGAGED 1 +/** @} */ + +/** Number of bytes between each subsequent SMID register */ +#define SCM_SMID_WIDTH 8 + +/** + * @defgroup smncommandregdefs SMN Command Register Definitions (SMN_COMMAND_REG) + */ +/** @addtogroup smncommandregdefs */ +/** @{ */ + +/** These bits are unimplemented or reserved */ +#define SMN_COMMAND_ZEROS_MASK 0xfffffff0 +#define SMN_COMMAND_CLEAR_INTERRUPT 0x8 /**< Clear SMN Interrupt */ +#define SMN_COMMAND_CLEAR_BIT_BANK 0x4 /**< Clear SMN Bit Bank */ +#define SMN_COMMAND_ENABLE_INTERRUPT 0x2 /**< Enable SMN Interrupts */ +#define SMN_COMMAND_SET_SOFTWARE_ALARM 0x1 /**< Set Software Alarm */ +/** @} */ + +/** + * @defgroup smntimercontroldefs SMN Timer Control Register definitions (SMN_TIMER_CONTROL) + */ +/** @addtogroup smntimercontroldefs */ +/** @{ */ +/** These bits are reserved or zero */ +#define SMN_TIMER_CTRL_ZEROS_MASK 0xfffffffc +/** Load the timer from #SMN_TIMER_IV_REG */ +#define SMN_TIMER_LOAD_TIMER 0x2 +/** Setting to zero stops the Timer */ +#define SMN_TIMER_STOP_MASK 0x1 +/** Setting this value starts the timer */ +#define SMN_TIMER_START_TIMER 0x1 +/** @} */ + +/** + * @defgroup scmchainmodedefs SCM_CHAINING_MODE_MASK - Bit definitions + */ +/** @addtogroup scmchainmodedefs */ +/** @{ */ +#define SCM_CBC_MODE 0x2 /**< Cipher block chaining */ +#define SCM_ECB_MODE 0x0 /**< Electronic codebook. */ +/** @} */ + +/* Bit definitions in the SCM_CIPHER_MODE_MASK */ +/** + * @defgroup scmciphermodedefs SCM_CIPHER_MODE_MASK - Bit definitions + */ +/** @addtogroup scmciphermodedefs */ +/** @{ */ +#define SCM_DECRYPT_MODE 0x1 /**< decrypt from black to red memory */ +#define SCM_ENCRYPT_MODE 0x0 /**< encrypt from red to black memory */ +/** @} */ + +/** + * @defgroup smndbgdetdefs SMN Debug Detector Status Register (SCM_DEBUG_DETECT_STAT) + */ +/** @addtogroup smndbgdetdefs */ +/** @{ */ +#define SMN_DBG_ZEROS_MASK 0xfffff000 /**< These bits are zero or reserved */ +#define SMN_DBG_D12 0x0800 /**< Error detected on Debug Port D12 */ +#define SMN_DBG_D11 0x0400 /**< Error detected on Debug Port D11 */ +#define SMN_DBG_D10 0x0200 /**< Error detected on Debug Port D10 */ +#define SMN_DBG_D9 0x0100 /**< Error detected on Debug Port D9 */ +#define SMN_DBG_D8 0x0080 /**< Error detected on Debug Port D8 */ +#define SMN_DBG_D7 0x0040 /**< Error detected on Debug Port D7 */ +#define SMN_DBG_D6 0x0020 /**< Error detected on Debug Port D6 */ +#define SMN_DBG_D5 0x0010 /**< Error detected on Debug Port D5 */ +#define SMN_DBG_D4 0x0008 /**< Error detected on Debug Port D4 */ +#define SMN_DBG_D3 0x0004 /**< Error detected on Debug Port D3 */ +#define SMN_DBG_D2 0x0002 /**< Error detected on Debug Port D2 */ +#define SMN_DBG_D1 0x0001 /**< Error detected on Debug Port D1 */ +/** @} */ + +/** Mask for the usable bits of the Sequence Start Register + (#SMN_SEQ_START_REG) */ +#define SMN_SEQUENCE_START_MASK 0x0000ffff + +/** Mask for the usable bits of the Sequence End Register + (#SMN_SEQ_END_REG) */ +#define SMN_SEQUENCE_END_MASK 0x0000ffff + +/** Mask for the usable bits of the Sequence Check Register + (#SMN_SEQ_CHECK_REG) */ +#define SMN_SEQUENCE_CHECK_MASK 0x0000ffff + +/** Mask for the usable bits of the Bit Counter Register + (#SMN_BB_CNT_REG) */ +#define SMN_BIT_COUNT_MASK 0x000007ff + +/** Mask for the usable bits of the Bit Bank Increment Size Register + (#SMN_BB_INC_REG) */ +#define SMN_BITBANK_INC_SIZE_MASK 0x000007ff + +/** Mask for the usable bits of the Bit Bank Decrement Register + (#SMN_BB_DEC_REG) */ +#define SMN_BITBANK_DECREMENT_MASK 0x000007ff + +/** Mask for the usable bits of the Compare Size Register + (#SMN_COMPARE_REG) */ +#define SMN_COMPARE_SIZE_MASK 0x0000003f + +/*! @} */ + +#endif /* SCC_DRIVER_H */ diff --git a/include/linux/mxc_scc_driver.h b/include/linux/mxc_scc_driver.h new file mode 100644 index 000000000000..5cb0585f6a53 --- /dev/null +++ b/include/linux/mxc_scc_driver.h @@ -0,0 +1,1031 @@ + +/* + * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#ifndef __ASM_ARCH_MXC_SCC_DRIVER_H__ +#define __ASM_ARCH_MXC_SCC_DRIVER_H__ + +/* Start marker for C++ compilers */ +#ifdef __cplusplus +extern "C" { +#endif + +/* + * NAMING CONVENTIONS + * ================== + * (A note to maintainers and other interested parties) + * + * Use scc_ or SCC_ prefix for 'high-level' interface routines and the types + * passed to those routines. Try to avoid #defines in these interfaces. + * + * Use SMN_ or SCM_ prefix for the #defines used with scc_read_register() and + * scc_write_register, or values passed/retrieved from those routines. + */ + +/*! + * @defgroup MXCSCC SCC Driver + * + * @ingroup MXCSECDRVRS + */ + +/*! + * @file arch-mxc/mxc_scc_driver.h + * + * @brief (Header file to use the SCC driver.) + * + * The SCC driver will only be available to other kernel modules. That is, + * there will be no node file in /dev, no way for a user-mode program to access + * the driver, no way for a user program to access the device directly. + * + * With the exception of #scc_monitor_security_failure(), all routines are + * 'synchronous', i.e. they will not return to their caller until the requested + * action is complete, or fails to complete. Some of these functions could + * take quite a while to perform, depending upon the request. + * + * Routines are provided to: + * @li encrypt or decrypt secrets - #scc_crypt() + * @li trigger a security-violation alarm - #scc_set_sw_alarm() + * @li get configuration and version information - #scc_get_configuration() + * @li zeroize memory - #scc_zeroize_memories() + * @li Work on wrapped and stored secret values: #scc_alloc_slot(), + * #scc_dealloc_slot(), scc_load_slot(), #scc_decrypt_slot(), + * #scc_encrypt_slot(), #scc_get_slot_info() + + * @li monitor the Security Failure alarm - #scc_monitor_security_failure() + * @li stop monitoring Security Failure alarm - + * #scc_stop_monitoring_security_failure() + * @li write registers of the SCC - #scc_write_register() + * @li read registers of the SCC - #scc_read_register() + * + * The driver does not allow "storage" of data in either the Red or Black + * memories. Any decrypted secret is returned to the user, and if the user + * wants to use it at a later point, the encrypted form must again be passed + * to the driver, and it must be decrypted again. + * + * The SCC encrypts and decrypts using Triple DES with an internally stored + * key. When the SCC is in Secure mode, it uses its secret, unique-per-chip + * key. When it is in Non-Secure mode, it uses a default key. This ensures + * that secrets stay secret if the SCC is not in Secure mode. + * + * Not all functions that could be provided in a 'high level' manner have been + * implemented. Among the missing are interfaces to the ASC/AIC components and + * the timer functions. These and other features must be accessed through + * #scc_read_register() and #scc_write_register(), using the @c \#define values + * provided. + * + * Here is a glossary of acronyms used in the SCC driver documentation: + * - CBC - Cipher Block Chaining. A method of performing a block cipher. + * Each block is encrypted using some part of the result of the previous + * block's encryption. It needs an 'initialization vector' to seed the + * operation. + * - ECB - Electronic Code Book. A method of performing a block cipher. + * With a given key, a given block will always encrypt to the same value. + * - DES - Data Encryption Standard. (8-byte) Block cipher algorithm which + * uses 56-bit keys. In SCC, this key is constant and unique to the device. + * SCC uses the "triple DES" form of this algorithm. + * - AIC - Algorithm Integrity Checker. + * - ASC - Algorithm Sequence Checker. + * - SMN - Security Monitor. The part of the SCC responsible for monitoring + * for security problems and notifying the CPU and other PISA components. + * - SCM - Secure Memory. The part of the SCC which handles the cryptography. + * - SCC - Security Controller. Central security mechanism for PISA. + * - PISA - Platform-Independent Security Architecture. + */ + +/* Temporarily define compile-time flags to make Doxygen happy. */ +#ifdef DOXYGEN_HACK +/*! @defgroup scccompileflags SCC Driver compile-time flags + * + * These preprocessor flags should be set, if desired, in a makefile so + * that they show up on the compiler command line. + */ +/*! @addtogroup scccompileflags */ + +/*! @{ */ +/*! + * Compile-time flag to change @ref smnregs and @ref scmregs + * offset values for the SCC's implementation on the MX.21 board. + * + * This must also be set properly for any code which calls the + * scc_read_register() or scc_write_register() functions or references the + * register offsets. + */ +#define TAHITI +/*! @} */ +#undef TAHITI + +#endif /* DOXYGEN_HACK */ + +/*! Major Version of the driver. Used for + scc_configuration->driver_major_version */ +#define SCC_DRIVER_MAJOR_VERSION_1 1 +/*! Old Minor Version of the driver. */ +#define SCC_DRIVER_MINOR_VERSION_0 0 +/*! Old Minor Version of the driver. */ +#define SCC_DRIVER_MINOR_VERSION_4 4 +/*! Old Minor Version of the driver. */ +#define SCC_DRIVER_MINOR_VERSION_5 5 +/*! Old Minor Version of the driver. */ +#define SCC_DRIVER_MINOR_VERSION_6 6 +/*! Minor Version of the driver. Used for + scc_configuration->driver_minor_version */ +#define SCC_DRIVER_MINOR_VERSION_8 8 + + +/*! + * @typedef scc_return_t + */ +/*! Common status return values from SCC driver functions. */ + typedef enum scc_return_t { + SCC_RET_OK = 0, /*!< Function succeeded */ + SCC_RET_FAIL, /*!< Non-specific failure */ + SCC_RET_VERIFICATION_FAILED, /*!< Decrypt validation failed */ + SCC_RET_TOO_MANY_FUNCTIONS, /*!< At maximum registered functions */ + SCC_RET_BUSY, /*!< SCC is busy and cannot handle request */ + SCC_RET_INSUFFICIENT_SPACE, /*!< Encryption or decryption failed because + @c count_out_bytes says that @c data_out is + too small to hold the value. */ + } scc_return_t; + +/*! + * Configuration information about SCC and the driver. + * + * This struct/typedef contains information from the SCC and the driver to + * allow the user of the driver to determine the size of the SCC's memories and + * the version of the SCC and the driver. + */ + typedef struct scc_config_t { + int driver_major_version; /*!< Major version of the SCC driver code */ + int driver_minor_version; /*!< Minor version of the SCC driver code */ + int scm_version; /*!< Version from SCM Configuration register */ + int smn_version; /*!< Version from SMN Status register */ + int block_size_bytes; /*!< Number of bytes per block of RAM; also + block size of the crypto algorithm. */ + int black_ram_size_blocks; /*!< Number of blocks of Black RAM */ + int red_ram_size_blocks; /*!< Number of blocks of Red RAM */ + } scc_config_t; + +/*! + * @typedef scc_enc_dec_t + */ +/*! + * Determine whether SCC will run its cryptographic + * function as an encryption or decryption. Used as an argument to + * #scc_crypt(). + */ + typedef enum scc_enc_dec_t { + SCC_ENCRYPT, /*!< Encrypt (from Red to Black) */ + SCC_DECRYPT /*!< Decrypt (from Black to Red) */ + } scc_enc_dec_t; + +/* + * @typedef scc_crypto_mode_t + */ +/*! + * Determine whether SCC will run its cryptographic function in ECB (electronic + * codebook) or CBC (cipher-block chaining) mode. Used as an argument to + * #scc_crypt(). + */ + typedef enum scc_crypto_mode_t { + SCC_ECB_MODE, /*!< Electronic Codebook Mode */ + SCC_CBC_MODE /*!< Cipher Block Chaining Mode */ + } scc_crypto_mode_t; + +/*! + * @typedef scc_verify_t + */ +/*! + * Tell the driver whether it is responsible for verifying the integrity of a + * secret. During an encryption, using other than #SCC_VERIFY_MODE_NONE will + * cause a check value to be generated and appended to the plaintext before + * encryption. During decryption, the check value will be verified after + * decryption, and then stripped from the message. + */ + typedef enum scc_verify_t { + /*! No verification value added or checked. Input plaintext data must be + * be a multiple of the blocksize (#scc_get_configuration()). */ + SCC_VERIFY_MODE_NONE, + /*! Driver will generate/validate a 2-byte CCITT CRC. Input plaintext will + be padded to a multiple of the blocksize, adding 3-10 bytes to the + resulting output ciphertext. Upon decryption, this padding will be + stripped, and the CRC will be verified. */ + SCC_VERIFY_MODE_CCITT_CRC + } scc_verify_t; + +/*! + * Determine if the given credentials match that of the key slot. + * + * @param[in] owner_id A value which will control access to the slot. + * @param[in] slot Key Slot to query + * @param[in] access_len Length of the key + * + * @return 0 on success, non-zero on failure. See #scc_return_t. + */ + scc_return_t + scc_verify_slot_access(uint64_t owner_id, uint32_t slot, + uint32_t access_len); + +/*! + * Retrieve configuration information from the SCC. + * + * This function always succeeds. + * + * @return A pointer to the configuration information. This is a pointer to + * static memory and must not be freed. The values never change, and + * the return value will never be null. + */ + extern scc_config_t *scc_get_configuration(void); + +/*! + * Zeroize Red and Black memories of the SCC. This will start the Zeroizing + * process. The routine will return when the memories have zeroized or failed + * to do so. The driver will poll waiting for this to occur, so this + * routine must not be called from interrupt level. Some future version of + * driver may elect instead to sleep. + * + * @return 0 or error if initialization fails. + */ + extern scc_return_t scc_zeroize_memories(void); + +/*! + * Perform a Triple DES encryption or decryption operation. + * + * This routine will cause the SCM to perform an encryption or decryption with + * its internal key. If the SCC's #SMN_STATUS register shows that the SCC is + * in #SMN_STATE_SECURE, then the Secret Key will be used. If it is + * #SMN_STATE_NON_SECURE (or health check), then the Default Key will be used. + * + * This function will perform in a variety of ways, depending upon the values + * of @c direction, @c crypto_mode, and @c check_mode. If + * #SCC_VERIFY_MODE_CCITT_CRC mode is requested, upon successful completion, + * the @c count_in_bytes will be different from the returned value of @c + * count_out_bytes. This is because the two-byte CRC and some amount of + * padding (at least one byte) will either be added or stripped. + * + * This function will not return until the SCC has performed the operation (or + * reported failure to do so). It must therefore not be called from interrupt + * level. In the current version, it will poll the SCC for completion. In + * future versions, it may sleep. + * + * @param[in] count_in_bytes The number of bytes to move through the crypto + * function. Must be greater than zero. + * + * @param[in] data_in Pointer to the array of bytes to be used as input + * to the crypto function. + * + * @param[in] init_vector Pointer to the block-sized (8 byte) array of + * bytes which form the initialization vector for + * this operation. A non-null value is required + * when @c crypto_mode has the value #SCC_CBC_MODE; + * the value is ignored in #SCC_ECB_MODE. + * + * @param[in] direction Direct the driver to perform encryption or + * decryption. + * + * @param[in] crypto_mode Run the crypto function in ECB or CBC mode. + * + * @param[in] check_mode During encryption, generate and append a check + * value to the plaintext and pad the resulting + * data. During decryption, validate the plaintext + * with that check value and remove the padding. + * + * @param[in,out] count_out_bytes On input, the number of bytes available for + * copying to @c data_out. On return, the number of + * bytes copied to @c data_out. + * + * @param[out] data_out Pointer to the array of bytes that are where the + * output of the crypto function are to be placed. + * For encryption, this must be able to hold a + * longer ciphertext than the plaintext message at + * @c data_in. The driver will append a 'pad' of + * 1-8 bytes to the message, and if @c check_mode is + * used, additional bytes may be added, the number + * depending upon the type of check being requested. + * + * @return 0 on success, non-zero on failure. See #scc_return_t. + * + * @internal + * This function will verify SCC state and the functions parameters. It will + * acquire the crypto lock, and set up some SCC registers and variables common + * to encryption and decryption. A rough check will be made to verify that + * enough space is available in @c count_out_bytes. Upon success, either the + * #scc_encrypt or #scc_decrypt routine will be called to do the actual work. + * The crypto lock will then be released. + */ +extern scc_return_t scc_crypt(unsigned long count_in_bytes, + const uint8_t *data_in, + const uint8_t *init_vector, + scc_enc_dec_t direction, + scc_crypto_mode_t crypto_mode, + scc_verify_t check_mode, + uint8_t *data_out, + unsigned long *count_out_bytes); + + +/*! + * Allocate a key slot for a stored key (or other stored value). + * + * This feature is to allow decrypted secret values to be kept in RED RAM. + * This can all visibility of the data only by Sahara. + * + * @param value_size_bytes Size, in bytes, of RED key/value. Currently only + * a size up to 32 bytes is supported. + * + * @param owner_id A value which will control access to the slot. + * It must be passed into to any subsequent calls to + * use the assigned slot. + * + * @param[out] slot The slot number for the key. + * + * @return 0 on success, non-zero on failure. See #scc_return_t. + */ + extern scc_return_t scc_alloc_slot(uint32_t value_size_bytes, + uint64_t owner_id, uint32_t *slot); + +/*! + * Deallocate the key slot of a stored key or secret value. + * + * @param owner_id The id which owns the @c slot. + * + * @param slot The slot number for the key. + + * @return 0 on success, non-zero on failure. See #scc_return_t. + */ + extern scc_return_t scc_dealloc_slot(uint64_t owner_id, uint32_t slot); + +/*! + * Load a value into a slot. + * + * @param owner_id Value of owner of slot + * @param slot Handle of slot + * @param key_data Data to load into the slot + * @param key_length Length, in bytes, of @c key_data to copy to SCC. + * + * @return SCC_RET_OK on success. SCC_RET_FAIL will be returned if slot + * specified cannot be accessed for any reason, or SCC_RET_INSUFFICIENT_SPACE + * if @c key_length exceeds the size of the slot. + */ + extern scc_return_t scc_load_slot(uint64_t owner_id, uint32_t slot, + const uint8_t *key_data, + uint32_t key_length); +/*! + * Read a value from a slot. + * + * @param owner_id Value of owner of slot + * @param slot Handle of slot + * @param key_length Length, in bytes, of @c key_data to copy from SCC. + * @param key_data Location to write the key + * + * @return SCC_RET_OK on success. SCC_RET_FAIL will be returned if slot + * specified cannot be accessed for any reason, or SCC_RET_INSUFFICIENT_SPACE + * if @c key_length exceeds the size of the slot. + */ + extern scc_return_t scc_read_slot(uint64_t owner_id, uint32_t slot, + uint32_t key_length, + uint8_t *key_data); + +/*! + * Allocate a key slot to fit the requested size. + * + * @param owner_id Value of owner of slot + * @param slot Handle of slot + * @param length Length, in bytes, of @c black_data + * @param black_data Location to store result of encrypting RED data in slot + * + * @return SCC_RET_OK on success, SCC_RET_FAIL if slot specified cannot be + * accessed for any reason. + */ + extern scc_return_t scc_encrypt_slot(uint64_t owner_id, uint32_t slot, + uint32_t length, + uint8_t *black_data); + +/*! + * Decrypt some black data and leave result in the slot. + * + * @param owner_id Value of owner of slot + * @param slot Handle of slot + * @param length Length, in bytes, of @c black_data + * @param black_data Location of data to dencrypt and store in slot + * + * @return SCC_RET_OK on success, SCC_RET_FAIL if slot specified cannot be + * accessed for any reason. + */ + extern scc_return_t scc_decrypt_slot(uint64_t owner_id, uint32_t slot, + uint32_t length, + const uint8_t *black_data); + +/*! + * Get attributes of data in RED slot. + * + * @param owner_id The id which owns the @c slot. + * + * @param slot The slot number for the key. + * + * @param[out] address Physical address of RED value. + * + * @param[out] value_size_bytes Length, in bytes, of RED value, + * or NULL if unneeded.. + * + * @param[out] slot_size_bytes Length, in bytes, of slot size, + * or NULL if unneeded.. + * + * @return 0 on success, non-zero on failure. See #scc_return_t. + */ + extern scc_return_t scc_get_slot_info(uint64_t owner_id, uint32_t slot, + uint32_t *address, + uint32_t *value_size_bytes, + uint32_t *slot_size_bytes); + +/*! + * Signal a software alarm to the SCC. This will take the SCC and other PISA + * parts out of Secure mode and into Security Failure mode. The SCC will stay + * in failed mode until a reboot. + * + * @internal + * If the SCC is not already in fail state, simply write the + * #SMN_COMMAND_SET_SOFTWARE_ALARM bit in #SMN_COMMAND. Since there is no + * reason to wait for the interrupt to bounce back, simply act as though + * one did. + */ + extern void scc_set_sw_alarm(void); + +/*! + * This routine will register a function to be called should a Security Failure + * be signalled by the SCC (Security Monitor). + * + * The callback function may be called from interrupt level, it may be called + * from some process' task. It should therefore not take a long time to + * perform its operation, and it may not sleep. + * + * @param callback_func Function pointer to routine which will receive + * notification of the security failure. + * @return 0 if function was successfully registered, non-zero on + * failure. See #scc_return_t. + * + * @internal + * There is a fixed global static array which keeps track of the requests to + * monitor the failure. + * + * Add @c callback_func to the first empty slot in #scc_callbacks[]. If there + * is no room, return #SCC_RET_TOO_MANY_FUNCTIONS. + */ + extern scc_return_t scc_monitor_security_failure(void + callback_func(void)); + +/*! + * This routine will deregister a function previously registered with + * #scc_monitor_security_failure(). + * + * @param callback_func Function pointer to routine previously registered with + * #scc_stop_monitoring_security_failure(). + */ + extern void scc_stop_monitoring_security_failure(void + callback_func(void)); + +/*! + * Read value from an SCC register. + * The offset will be checked for validity (range) as well as whether it is + * accessible (e.g. not busy, not in failed state) at the time of the call. + * + * @param[in] register_offset The (byte) offset within the SCC block + * of the register to be queried. See + * @ref scmregs and @ref smnregs. + * @param[out] value Pointer to where value from the register + * should be placed. + * @return 0 if OK, non-zero on error. See #scc_return_t. + * + * @internal + * Verify that the register_offset is a) valid, b) refers to a readable + * register, and c) the SCC is in a state which would allow a read of this + * register. + */ + extern scc_return_t scc_read_register(int register_offset, + uint32_t *value); + +/*! + * Write a new value into an SCC register. + * The offset will be checked for validity (range) as well as whether it is + * accessible (e.g. not busy, not in failed state) at the time of the call. + * + * @param[in] register_offset The (byte) offset within the SCC block + * of the register to be modified. See + * @ref scmregs and @ref smnregs. + * @param[in] value The value to store into the register. + * @return 0 if OK, non-zero on error. See #scc_return_t. + * + * @internal + * Verify that the register_offset is a) valid, b) refers to a writeable + * register, and c) the SCC is in a state which would allow a write to this + * register. + */ + extern scc_return_t scc_write_register(int register_offset, + uint32_t value); + +/* + * NOTE TO MAINTAINERS + * + * All of the doxygen comments for the register offset values are in this the + * following comment section. Any changes to register names or definitions + * must be reflected in this section and in both the TAHITI and non-TAHITI + *version of the memory map. + */ + +/*! + * @defgroup scmregs SCM Registers + * + * These values are offsets into the SCC for the Secure Memory + * (SCM) registers. They are used in the @c register_offset parameter of + * #scc_read_register() and #scc_write_register(). + */ +/*! @addtogroup scmregs */ +/*! @{ */ +/*! @def SCM_RED_START + * Starting block offset in red memory for cipher function. */ + +/*! @def SCM_BLACK_START + * Starting block offset in black memory for cipher function. */ + +/*! @def SCM_LENGTH + * Number of blocks to process during cipher function */ + +/*! @def SCM_CONTROL + * SCM Control register. + * See @ref scmcontrolregdefs "SCM Control Register definitions" for details. + */ + +/*! @def SCM_STATUS + * SCM Status register. + * See @ref scmstatusregdefs "SCM Status Register Definitions" for details. + */ + +/*! @def SCM_ERROR_STATUS + * SCM Error Status Register. + * See @ref scmerrstatdefs "SCM Error Status Register definitions" for + * details. */ + +/*! @def SCM_INTERRUPT_CTRL + * SCM Interrupt Control Register. + * See @ref scminterruptcontroldefs "SCM Interrupt Control Register definitions" + * for details. + */ + +/*! @def SCM_CONFIGURATION + * SCM Configuration Register. + * See @ref scmconfigdefs "SCM Configuration Register Definitions" for + * details. + */ + +/*! @def SCM_INIT_VECTOR_0 + * Upper Half of the Initialization Vector */ + +/*! @def SCM_INIT_VECTOR_1 + * Lower Half of the Initialization Vector */ + +/*! @def SCM_RED_MEMORY + * Starting location of first block of Red memory */ + +/*! @def SCM_BLACK_MEMORY + * Starting location of first block of Black memory */ + + /*! @} *//* end of SCM group */ + +/*! + * @defgroup smnregs SMN Registers + * + * These values are offsets into the SCC for the Security Monitor + * (SMN) registers. They are used in the @c register_offset parameter of the + * #scc_read_register() and #scc_write_register(). + */ +/*! @addtogroup smnregs */ +/*! @{ */ +/*! @def SMN_STATUS + * Status register for SMN. + * See @ref smnstatusregdefs "SMN Status Register definitions" for further + * information. + */ + +/*! @def SMN_COMMAND + * Command register for SMN. See + * @ref smncommandregdefs "Command Register Definitions" for further + * information. + */ + +/*! @def SMN_SEQUENCE_START + * Sequence Start register for ASC. See #SMN_SEQUENCE_START_MASK + */ + +/*! @def SMN_SEQUENCE_END + * Sequence End register for ASC. See #SMN_SEQUENCE_CHECK_MASK + */ + +/*! @def SMN_SEQUENCE_CHECK + * Sequence Check register for ASC. See #SMN_SEQUENCE_END_MASK + */ + +/*! @def SMN_BIT_COUNT + * Bit Bank Repository for AIC. See #SMN_BIT_COUNT_MASK + */ + +/*! @def SMN_BITBANK_INC_SIZE + * Bit Bank Increment Size for AIC. See #SMN_BITBANK_INC_SIZE_MASK + */ + +/*! @def SMN_BITBANK_DECREMENT + * Bit Bank Decrement for AIC. See #SMN_BITBANK_DECREMENT_MASK + */ + +/*! @def SMN_COMPARE_SIZE + * Compare Size register for Plaintext/Ciphertext checker. See + * #SMN_COMPARE_SIZE_MASK */ + +/*! @def SMN_PLAINTEXT_CHECK + * Plaintext Check register for Plaintext/Ciphertext checker. + */ + +/*! @def SMN_CIPHERTEXT_CHECK + * Ciphertext Check register for Plaintext/Ciphertext checker. + */ + +/*! @def SMN_TIMER_IV + * Timer Initial Value register + */ + +/*! @def SMN_TIMER_CONTROL + * Timer Control register. + * See @ref smntimercontroldefs "SMN Timer Control Register definitions". + */ + +/*! @def SMN_DEBUG_DETECT_STAT + * Debug Detector Status Register + * See @ref smndbgdetdefs "SMN Debug Detector Status Register"for definitions. + */ + +/*! @def SMN_TIMER + * Current value of the Timer Register + */ + + /*! @} *//* end of SMN group */ + +/* + * SCC MEMORY MAP + * + */ + +/* SCM registers */ +#define SCM_RED_START 0x00000000 /* read/write */ +#define SCM_BLACK_START 0x00000004 /* read/write */ +#define SCM_LENGTH 0x00000008 /* read/write */ +#define SCM_CONTROL 0x0000000C /* read/write */ +#define SCM_STATUS 0x00000010 /* read only */ +#define SCM_ERROR_STATUS 0x00000014 /* read/write */ +#define SCM_INTERRUPT_CTRL 0x00000018 /* read/write */ +#define SCM_CONFIGURATION 0x0000001C /* read only */ +#define SCM_INIT_VECTOR_0 0x00000020 /* read/write */ +#define SCM_INIT_VECTOR_1 0x00000024 /* read/write */ +#define SCM_RED_MEMORY 0x00000400 /* read/write */ +#define SCM_BLACK_MEMORY 0x00000800 /* read/write */ + +/* SMN Registers */ +#define SMN_STATUS 0x00001000 /* read/write */ +#define SMN_COMMAND 0x00001004 /* read/write */ +#define SMN_SEQUENCE_START 0x00001008 /* read/write */ +#define SMN_SEQUENCE_END 0x0000100C /* read/write */ +#define SMN_SEQUENCE_CHECK 0x00001010 /* read/write */ +#define SMN_BIT_COUNT 0x00001014 /* read only */ +#define SMN_BITBANK_INC_SIZE 0x00001018 /* read/write */ +#define SMN_BITBANK_DECREMENT 0x0000101C /* write only */ +#define SMN_COMPARE_SIZE 0x00001020 /* read/write */ +#define SMN_PLAINTEXT_CHECK 0x00001024 /* read/write */ +#define SMN_CIPHERTEXT_CHECK 0x00001028 /* read/write */ +#define SMN_TIMER_IV 0x0000102C /* read/write */ +#define SMN_TIMER_CONTROL 0x00001030 /* read/write */ +#define SMN_DEBUG_DETECT_STAT 0x00001034 /* read/write */ +#define SMN_TIMER 0x00001038 /* read only */ + +/*! Total address space of the SCC, in bytes */ +#define SCC_ADDRESS_RANGE 0x103c + +/*! + * @defgroup smnstatusregdefs SMN Status Register definitions (SMN_STATUS) + */ +/*! @addtogroup smnstatusregdefs */ +/*! @{ */ +/*! SMN version id. */ +#define SMN_STATUS_VERSION_ID_MASK 0xfc000000 +/*! number of bits to shift #SMN_STATUS_VERSION_ID_MASK to get it to LSB */ +#define SMN_STATUS_VERSION_ID_SHIFT 26 +/*! Cacheable access to SMN attempted. */ +#define SMN_STATUS_CACHEABLE_ACCESS 0x02000000 +/*! Illegal bus master access attempted. */ +#define SMN_STATUS_ILLEGAL_MASTER 0x01000000 +/*! Scan mode entered/exited since last reset. */ +#define SMN_STATUS_SCAN_EXIT 0x00800000 +/*! Unaligned access attempted. */ +#define SMN_STATUS_UNALIGNED_ACCESS 0x00400000 +/*! Bad byte offset access attempted. */ +#define SMN_STATUS_BYTE_ACCESS 0x00200000 +/*! Illegal address access attempted. */ +#define SMN_STATUS_ILLEGAL_ADDRESS 0x00100000 +/*! User access attempted. */ +#define SMN_STATUS_USER_ACCESS 0x00080000 +/*! SCM is using DEFAULT key. */ +#define SMN_STATUS_DEFAULT_KEY 0x00040000 +/*! SCM detects weak or bad key. */ +#define SMN_STATUS_BAD_KEY 0x00020000 +/*! Illegal access to SCM detected. */ +#define SMN_STATUS_ILLEGAL_ACCESS 0x00010000 +/*! Internal error detected in SCM. */ +#define SMN_STATUS_SCM_ERROR 0x00008000 +/*! SMN has an outstanding interrupt. */ +#define SMN_STATUS_SMN_STATUS_IRQ 0x00004000 +/*! Software Alarm was triggered. */ +#define SMN_STATUS_SOFTWARE_ALARM 0x00002000 +/*! Timer has expired. */ +#define SMN_STATUS_TIMER_ERROR 0x00001000 +/*! Plaintext/Ciphertext compare failed. */ +#define SMN_STATUS_PC_ERROR 0x00000800 +/*! Bit Bank detected overflow or underflow */ +#define SMN_STATUS_BITBANK_ERROR 0x00000400 +/*! Algorithm Sequence Check failed. */ +#define SMN_STATUS_ASC_ERROR 0x00000200 +/*! Security Policy Block detected error. */ +#define SMN_STATUS_SECURITY_POLICY_ERROR 0x00000100 +/*! At least one Debug signal is active. */ +#define SMN_STATUS_DEBUG_ACTIVE 0x00000080 +/*! SCM failed to zeroize its memory. */ +#define SMN_STATUS_ZEROIZE_FAIL 0x00000040 +/*! Processor booted from internal ROM. */ +#define SMN_STATUS_INTERNAL_BOOT 0x00000020 +/*! SMN's internal state. */ +#define SMN_STATUS_STATE_MASK 0x0000001F +/*! Number of bits to shift #SMN_STATUS_STATE_MASK to get it to LSB. */ +#define SMN_STATUS_STATE_SHIFT 0 +/*! @} */ + +/*! + * @defgroup sccscmstates SMN Model Secure State Controller States (SMN_STATE_MASK) + */ +/*! @addtogroup sccscmstates */ +/*! @{ */ +/*! This is the first state of the SMN after power-on reset */ +#define SMN_STATE_START 0x0 +/*! The SMN is zeroizing its RAM during reset */ +#define SMN_STATE_ZEROIZE_RAM 0x5 +/*! SMN has passed internal checks, and is waiting for Software check-in */ +#define SMN_STATE_HEALTH_CHECK 0x6 +/*! Fatal Security Violation. SMN is locked, SCM is inoperative. */ +#define SMN_STATE_FAIL 0x9 +/*! SCC is in secure state. SCM is using secret key. */ +#define SMN_STATE_SECURE 0xA +/*! Due to non-fatal error, device is not secure. SCM is using default key. */ +#define SMN_STATE_NON_SECURE 0xC +/*! @} */ + +/*! + * @defgroup scmconfigdefs SCM Configuration Register definitions (SCM_CONFIGURATION) + **/ +/*! @addtogroup scmconfigdefs */ +/*! @{ */ +/*! Version number of the Secure Memory. */ +#define SCM_CFG_VERSION_ID_MASK 0xf8000000 +/*! Number of bits to shift #SCM_CFG_VERSION_ID_MASK to get it to LSB. */ +#define SCM_CFG_VERSION_ID_SHIFT 27 +/*! Version one value for SCC configuration */ +#define SCM_VERSION_1 1 +/*! Size, in blocks, of Red memory. */ +#define SCM_CFG_BLACK_SIZE_MASK 0x07fe0000 +/*! Number of bits to shift #SCM_CFG_BLACK_SIZE_MASK to get it to LSB. */ +#define SCM_CFG_BLACK_SIZE_SHIFT 17 +/*! Size, in blocks, of Black memory. */ +#define SCM_CFG_RED_SIZE_MASK 0x0001ff80 +/*! Number of bits to shift #SCM_CFG_RED_SIZE_MASK to get it to LSB. */ +#define SCM_CFG_RED_SIZE_SHIFT 7 +/*! Number of bytes per block. */ +#define SCM_CFG_BLOCK_SIZE_MASK 0x0000007f +/*! Number of bits to shift #SCM_CFG_BLOCK_SIZE_MASK to get it to LSB. */ +#define SCM_CFG_BLOCK_SIZE_SHIFT 0 +/*! @} */ + +/*! + * @defgroup smncommandregdefs SMN Command Register Definitions (SMN_COMMAND) + */ +/*! @addtogroup smncommandregdefs */ +/*! @{ */ +#define SMN_COMMAND_ZEROS_MASK 0xffffff70 /*!< These bits are unimplemented + or reserved */ +#define SMN_COMMAND_TAMPER_LOCK 0x10 /*!< Lock Tamper Detect Bit */ +#define SMN_COMMAND_CLEAR_INTERRUPT 0x8 /*!< Clear SMN Interrupt */ +#define SMN_COMMAND_CLEAR_BIT_BANK 0x4 /*!< Clear SMN Bit Bank */ +#define SMN_COMMAND_ENABLE_INTERRUPT 0x2 /*!< Enable SMN Interrupts */ +#define SMN_COMMAND_SET_SOFTWARE_ALARM 0x1 /*!< Set Software Alarm */ +/*! @} */ + +/*! + * @defgroup smntimercontroldefs SMN Timer Control Register definitions (SMN_TIMER_CONTROL) + */ +/*! @addtogroup smntimercontroldefs */ +/*! @{ */ +/*! These bits are reserved or zero */ +#define SMN_TIMER_CTRL_ZEROS_MASK 0xfffffffc +/*! Load the timer from #SMN_TIMER_IV */ +#define SMN_TIMER_LOAD_TIMER 0x2 +/*! Setting to zero stops the Timer */ +#define SMN_TIMER_STOP_MASK 0x1 +/*! Setting this value starts the timer */ +#define SMN_TIMER_START_TIMER 0x1 +/*! @} */ + +/*! + * @defgroup scminterruptcontroldefs SCM Interrupt Control Register definitions (SCM_INTERRUPT_CTRL) + * + * These are the bit definitions for the #SCM_INTERRUPT_CTRL register. + */ +/*! @addtogroup scminterruptcontroldefs */ +/*! @{ */ +/*! Clear SCM memory */ +#define SCM_INTERRUPT_CTRL_ZEROIZE_MEMORY 0x4 +/*! Clear outstanding SCM interrupt */ +#define SCM_INTERRUPT_CTRL_CLEAR_INTERRUPT 0x2 +/*! Inhibit SCM interrupts */ +#define SCM_INTERRUPT_CTRL_MASK_INTERRUPTS 0x1 +/*! @} */ + +/*! + * @defgroup scmcontrolregdefs SCM Control Register definitions (SCM_CONTROL). + * These values are used with the #SCM_CONTROL register. + */ +/*! @addtogroup scmcontrolregdefs */ +/*! @{ */ +/*! These bits are zero or reserved */ +#define SCM_CONTROL_ZEROS_MASK 0xfffffff8 +/*! Setting this will start encrypt/decrypt */ +#define SCM_CONTROL_START_CIPHER 0x04 +/*! CBC/ECB flag. + * See @ref scmchainmodedefs "Chaining Mode bit definitions." + */ +#define SCM_CONTROL_CHAINING_MODE_MASK 0x02 +/*! Encrypt/decrypt choice. + * See @ref scmciphermodedefs "Cipher Mode bit definitions." */ +#define SCM_CONTROL_CIPHER_MODE_MASK 0x01 +/*! @} */ + +/*! + * @defgroup scmchainmodedefs SCM_CHAINING_MODE_MASK - Bit definitions + */ +/*! @addtogroup scmchainmodedefs */ +/*! @{ */ +#define SCM_CBC_MODE 0x2 /*!< Cipher block chaining */ +#define SCM_ECB_MODE 0x0 /*!< Electronic codebook. */ +/*! @} */ + +/* Bit definitions in the SCM_CIPHER_MODE_MASK */ +/*! + * @defgroup scmciphermodedefs SCM_CIPHER_MODE_MASK - Bit definitions + */ +/*! @{ */ +#define SCM_DECRYPT_MODE 0x1 /*!< decrypt from black to red memory */ +#define SCM_ENCRYPT_MODE 0x0 /*!< encrypt from red to black memory */ +/*! @} */ + +/*! + * @defgroup scmstatusregdefs SCM Status Register (SCM_STATUS). + * Bit and field definitions of the SCM_STATUS register. + */ +/*! @addtogroup scmstatusregdefs */ +/*! @{ */ +/*! These bits are zero or reserved */ +#define SCM_STATUS_ZEROS_MASK 0xffffe000 +/*! Ciphering failed due to length error. */ +#define SCM_STATUS_LENGTH_ERROR 0x1000 +/*! SMN has stopped blocking access to the SCM */ +#define SCM_STATUS_BLOCK_ACCESS_REMOVED 0x0800 +/*! Ciphering done. */ +#define SCM_STATUS_CIPHERING_DONE 0x0400 +/*! Zeroizing done. */ +#define SCM_STATUS_ZEROIZING_DONE 0x0200 +/*! SCM wants attention. Interrupt status is available. */ +#define SCM_STATUS_INTERRUPT_STATUS 0x0100 +/*! Secret Key is in use. */ +#define SCM_STATUS_SECRET_KEY 0x0080 +/*! Secret Key is in use. Deprecated. Use #SCM_STATUS_SECRET_KEY. */ +#define SCM_STATUS_DEFAULT_KEY 0x0080 +/*! Internal error to SCM. */ +#define SCM_STATUS_INTERNAL_ERROR 0x0040 +/*! Secret key is not valid. */ +#define SCM_STATUS_BAD_SECRET_KEY 0x0020 +/*! Failed to zeroize memory. */ +#define SCM_STATUS_ZEROIZE_FAILED 0x0010 +/*! SMN is blocking access to Secure Memory. */ +#define SCM_STATUS_SMN_BLOCKING_ACCESS 0x0008 +/*! SCM is current encrypting or decrypting data. */ +#define SCM_STATUS_CIPHERING 0x0004 +/*! SCM is currently zeroizing data. */ +#define SCM_STATUS_ZEROIZING 0x0002 +/*! SCM is busy and access to memory is blocked. */ +#define SCM_STATUS_BUSY 0x0001 +/*! @} */ + +/*! + * @defgroup scmerrstatdefs SCM Error Status Register (SCM_ERROR_STATUS) + * + * These definitions are associated with the SCM Error Status Register + * (SCM_ERROR_STATUS). + */ +/*! @addtogroup scmerrstatdefs */ +/*! @{ */ +/*! These bits are zero or reserved */ +#define SCM_ERR_ZEROS_MASK 0xffffc000 +/*! Cacheable access to SCM was attempted */ +#define SCM_ERR_CACHEABLE_ACCESS 0x2000 +/*! Access attempted by illegal bus master */ +#define SCM_ERR_ILLEGAL_MASTER 0x1000 +/*! Unaligned access attempted */ +#define SCM_ERR_UNALIGNED_ACCESS 0x0800 +/*! Byte or half-word access attempted */ +#define SCM_ERR_BYTE_ACCESS 0x0400 +/*! Illegal address attempted */ +#define SCM_ERR_ILLEGAL_ADDRESS 0x0200 +/*! User access attempted */ +#define SCM_ERR_USER_ACCESS 0x0100 +/*! Access attempted while SCM was using default key */ +#define SCM_ERR_SECRET_KEY_IN_USE 0x0080 +/*! Access attempted while SCM had internal error */ +#define SCM_ERR_INTERNAL_ERROR 0x0040 +/*! Access attempted while SCM was detecting Bad Key */ +#define SCM_ERR_BAD_SECRET_KEY 0x0020 +/*! The SCM failed to Zeroize memory */ +#define SCM_ERR_ZEROIZE_FAILED 0x0010 +/*! Access attempted while SMN was Blocking Access */ +#define SCM_ERR_SMN_BLOCKING_ACCESS 0x0008 +/*! Access attempted while SCM was CIPHERING */ +#define SCM_ERR_CIPHERING 0x0004 +/*! Access attempted while SCM was ZEROIZING */ +#define SCM_ERR_ZEROIZING 0x0002 +/*! Access attempted while SCM was BUSY */ +#define SCM_ERR_BUSY 0x0001 +/*! @} */ + +/*! + * @defgroup smndbgdetdefs SMN Debug Detector Status Register + * (SCM_DEBUG_DETECT_STAT) + */ +/*! @addtogroup smndbgdetdefs */ +/*! @{ */ +#define SMN_DBG_ZEROS_MASK 0xfffff000 /*!< These bits are zero or reserved */ +#define SMN_DBG_D12 0x0800 /*!< Error detected on Debug Port D12 */ +#define SMN_DBG_D11 0x0400 /*!< Error detected on Debug Port D11 */ +#define SMN_DBG_D10 0x0200 /*!< Error detected on Debug Port D10 */ +#define SMN_DBG_D9 0x0100 /*!< Error detected on Debug Port D9 */ +#define SMN_DBG_D8 0x0080 /*!< Error detected on Debug Port D8 */ +#define SMN_DBG_D7 0x0040 /*!< Error detected on Debug Port D7 */ +#define SMN_DBG_D6 0x0020 /*!< Error detected on Debug Port D6 */ +#define SMN_DBG_D5 0x0010 /*!< Error detected on Debug Port D5 */ +#define SMN_DBG_D4 0x0008 /*!< Error detected on Debug Port D4 */ +#define SMN_DBG_D3 0x0004 /*!< Error detected on Debug Port D3 */ +#define SMN_DBG_D2 0x0002 /*!< Error detected on Debug Port D2 */ +#define SMN_DBG_D1 0x0001 /*!< Error detected on Debug Port D1 */ +/*! @} */ + +/*! Mask for the usable bits of the Sequence Start Register + (#SMN_SEQUENCE_START) */ +#define SMN_SEQUENCE_START_MASK 0x0000ffff + +/*! Mask for the usable bits of the Sequence End Register + (#SMN_SEQUENCE_END) */ +#define SMN_SEQUENCE_END_MASK 0x0000ffff + +/*! Mask for the usable bits of the Sequence Check Register + (#SMN_SEQUENCE_CHECK) */ +#define SMN_SEQUENCE_CHECK_MASK 0x0000ffff + +/*! Mask for the usable bits of the Bit Counter Register + (#SMN_BIT_COUNT) */ +#define SMN_BIT_COUNT_MASK 0x000007ff + +/*! Mask for the usable bits of the Bit Bank Increment Size Register + (#SMN_BITBANK_INC_SIZE) */ +#define SMN_BITBANK_INC_SIZE_MASK 0x000007ff + +/*! Mask for the usable bits of the Bit Bank Decrement Register + (#SMN_BITBANK_DECREMENT) */ +#define SMN_BITBANK_DECREMENT_MASK 0x000007ff + +/*! Mask for the usable bits of the Compare Size Register + (#SMN_COMPARE_SIZE) */ +#define SMN_COMPARE_SIZE_MASK 0x0000003f + +/* Close out marker for C++ compilers */ +#ifdef __cplusplus +} +#endif +#endif /* __ASM_ARCH_MXC_SCC_DRIVER_H__ */ diff --git a/include/linux/mxc_si4702.h b/include/linux/mxc_si4702.h new file mode 100644 index 000000000000..e85096c1bc45 --- /dev/null +++ b/include/linux/mxc_si4702.h @@ -0,0 +1,39 @@ +/* + * linux/drivers/char/mxc_si4702.h + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/*! + * @defgroup Character device driver for SI4702 FM radio + */ + +/* + * @file mxc_si4702.h + * + * @brief SI4702 Radio FM driver + * + * @ingroup Character + */ + +#ifndef _MXC_SI4702_FM_H +#define _MXC_SI4702_FM_H + +/* define IOCTL command */ +#define SI4702_GETVOLUME _IOR('S', 0x10, unsigned int) +#define SI4702_SETVOLUME _IOW('S', 0x11, unsigned int) +#define SI4702_MUTEON _IO('S', 0x12) +#define SI4702_MUTEOFF _IO('S', 0x13) +#define SI4702_SELECT _IOW('S', 0x14, unsigned int) +#define SI4702_SEEK _IOWR('S', 0x15, unsigned int) + +#endif /* _MXC_SI4702_FM_H */ diff --git a/include/linux/mxc_sim_interface.h b/include/linux/mxc_sim_interface.h new file mode 100644 index 000000000000..3e006b5d212d --- /dev/null +++ b/include/linux/mxc_sim_interface.h @@ -0,0 +1,108 @@ +/* + * Copyright 2008-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/*! + * @file mxc_sim_interface.h + * + * @brief Driver for Freescale IMX SIM interface + * + */ + +#ifndef MXC_SIM_INTERFACE_H +#define MXC_SIM_INTERFACE_H + +#define SIM_ATR_LENGTH_MAX 32 + +/* Raw ATR SIM_IOCTL_GET_ATR */ +typedef struct { + uint32_t size; /* length of ATR received */ + uint8_t t[SIM_ATR_LENGTH_MAX]; /* raw ATR string received */ +} sim_atr_t; + +/* Communication parameters for SIM_IOCTL_[GET|SET]_PARAM */ +typedef struct { + uint8_t convention; /* direct = 0, indirect = 1 */ + uint8_t FI, DI; /* frequency multiplier and devider indices */ + uint8_t PI1, II; /* programming voltage and current indices */ + uint8_t N; /* extra guard time */ + uint8_t T; /* protocol type: T0 = 0, T1 = 1 */ + uint8_t PI2; /* programming voltage 2 value */ + uint8_t WWT; /* working wait time */ +} sim_param_t; + +/* ISO7816-3 protocols */ +#define SIM_PROTOCOL_T0 0 +#define SIM_PROTOCOL_T1 1 + +/* Transfer data for SIM_IOCTL_XFER */ +typedef struct { + uint8_t *xmt_buffer; /* transmit buffer pointer */ + int32_t xmt_length; /* transmit buffer length */ + uint8_t *rcv_buffer; /* receive buffer pointer */ + int32_t rcv_length; /* receive buffer length */ + int type; /* transfer type: TPDU = 0, PTS = 1 */ + int timeout; /* transfer timeout in milliseconds */ + uint8_t sw1; /* status word 1 */ + uint8_t sw2; /* status word 2 */ +} sim_xfer_t; + +/* Transfer types for SIM_IOCTL_XFER */ +#define SIM_XFER_TYPE_TPDU 0 +#define SIM_XFER_TYPE_PTS 1 + +/* Interface power states */ +#define SIM_POWER_OFF 0 +#define SIM_POWER_ON 1 + +/* Return values for SIM_IOCTL_GET_PRESENSE */ +#define SIM_PRESENT_REMOVED 0 +#define SIM_PRESENT_DETECTED 1 +#define SIM_PRESENT_OPERATIONAL 2 + +/* Return values for SIM_IOCTL_GET_ERROR */ +#define SIM_OK 0 +#define SIM_E_ACCESS 1 +#define SIM_E_TPDUSHORT 2 +#define SIM_E_PTSEMPTY 3 +#define SIM_E_INVALIDXFERTYPE 4 +#define SIM_E_INVALIDXMTLENGTH 5 +#define SIM_E_INVALIDRCVLENGTH 6 +#define SIM_E_NACK 7 +#define SIM_E_TIMEOUT 8 +#define SIM_E_NOCARD 9 +#define SIM_E_PARAM_FI_INVALID 10 +#define SIM_E_PARAM_DI_INVALID 11 +#define SIM_E_PARAM_FBYD_WITHFRACTION 12 +#define SIM_E_PARAM_FBYD_NOTDIVBY8OR12 13 +#define SIM_E_PARAM_DIVISOR_RANGE 14 +#define SIM_E_MALLOC 15 +#define SIM_E_IRQ 16 +#define SIM_E_POWERED_ON 17 +#define SIM_E_POWERED_OFF 18 + +/* ioctl encodings */ +#define SIM_IOCTL_BASE 0xc0 +#define SIM_IOCTL_GET_PRESENSE _IOR(SIM_IOCTL_BASE, 1, int) +#define SIM_IOCTL_GET_ATR _IOR(SIM_IOCTL_BASE, 2, sim_atr_t) +#define SIM_IOCTL_GET_PARAM_ATR _IOR(SIM_IOCTL_BASE, 3, sim_param_t) +#define SIM_IOCTL_GET_PARAM _IOR(SIM_IOCTL_BASE, 4, sim_param_t) +#define SIM_IOCTL_SET_PARAM _IOW(SIM_IOCTL_BASE, 5, sim_param_t) +#define SIM_IOCTL_XFER _IOR(SIM_IOCTL_BASE, 6, sim_xfer_t) +#define SIM_IOCTL_POWER_ON _IO(SIM_IOCTL_BASE, 7) +#define SIM_IOCTL_POWER_OFF _IO(SIM_IOCTL_BASE, 8) +#define SIM_IOCTL_WARM_RESET _IO(SIM_IOCTL_BASE, 9) +#define SIM_IOCTL_COLD_RESET _IO(SIM_IOCTL_BASE, 10) +#define SIM_IOCTL_CARD_LOCK _IO(SIM_IOCTL_BASE, 11) +#define SIM_IOCTL_CARD_EJECT _IO(SIM_IOCTL_BASE, 12) + +#endif diff --git a/include/linux/pmic_battery.h b/include/linux/pmic_battery.h new file mode 100644 index 000000000000..fe65be55c0ec --- /dev/null +++ b/include/linux/pmic_battery.h @@ -0,0 +1,419 @@ +/* + * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU Lesser General + * Public License. You may obtain a copy of the GNU Lesser General + * Public License Version 2.1 or later at the following locations: + * + * http://www.opensource.org/licenses/lgpl-license.html + * http://www.gnu.org/copyleft/lgpl.html + */ +#ifndef __ASM_ARCH_MXC_PMIC_BATTERY_H__ +#define __ASM_ARCH_MXC_PMIC_BATTERY_H__ + +/*! + * @defgroup PMIC_BATTERY PMIC Battery Driver + * @ingroup PMIC_DRVRS + */ + +/*! + * @file arch-mxc/pmic_battery.h + * @brief This is the header of PMIC Battery driver. + * + * @ingroup PMIC_BATTERY + */ + +#include +#include +#include + +/*! + * @name IOCTL user space interface + */ + +/*! @{ */ +/*! + * Enable and disable charger. + * Argument type: pointer to t_charger_setting + */ +#define PMIC_BATT_CHARGER_CONTROL _IOW('p', 0xc0, int) +/*! + * Set charger configuration. + * Argument type: pointer to t_charger_setting + */ +#define PMIC_BATT_SET_CHARGER _IOW('p', 0xc1, int) +/*! + * Get charger configuration. + * Argument type: pointer to t_charger_setting + */ +#define PMIC_BATT_GET_CHARGER _IOR('p', 0xc2, int) +/*! + * Get charger current. + * Argument type: pointer to t_charger_setting + */ +#define PMIC_BATT_GET_CHARGER_CURRENT _IOR('p', 0xc3, int) +/*! + * Set EOL control + * Argument type: pointer to t_eol_setting + */ +#define PMIC_BATT_EOL_CONTROL _IOW('p', 0xc4, int) +/*! + * Enable and disable charging LED. + * Argument type: bool + */ +#define PMIC_BATT_LED_CONTROL _IOW('p', 0xc5, int) +/*! + * Enable and disable reverse supply. + * Argument type: bool + */ +#define PMIC_BATT_REV_SUPP_CONTROL _IOW('p', 0xc6, int) +/*! + * Enable and disable unregulated charging mode. + * Argument type: bool + */ +#define PMIC_BATT_UNREG_CONTROL _IOW('p', 0xc7, int) + +/*! + * Set the output controls. + * Argument type: t_control + */ +#define PMIC_BATT_SET_OUT_CONTROL _IOW('p', 0xc8, int) +/*! + * Set the over voltage threshold. + * Argument type: int + */ +#define PMIC_BATT_SET_THRESHOLD _IOW('p', 0xc9, int) + +/*! + * Get the charger voltage. + * Argument type: int + */ +#define PMIC_BATT_GET_CHARGER_VOLTAGE _IOR('p', 0xca, int) +/*! + * Get the battery voltage. + * Argument type: int + */ +#define PMIC_BATT_GET_BATTERY_VOLTAGE _IOR('p', 0xcb, int) +/*! + * Get the battery current. + * Argument type: int + */ +#define PMIC_BATT_GET_BATTERY_CURRENT _IOR('p', 0xcc, int) +/*! + * Get the charger sensor. + * Argument type: int + */ +#define PMIC_BATT_GET_CHARGER_SENSOR _IOR('p', 0xcd, int) +/*! + * Get the battery temperature. + * Argument type: int + */ +#define PMIC_BATT_GET_BATTERY_TEMPERATURE _IOR('p', 0xce, int) +/*! @} */ + +/*! + * This enumeration defines battery chargers. + */ +typedef enum { + BATT_MAIN_CHGR = 0, /*!< Main battery charger */ + BATT_CELL_CHGR, /*!< Cell battery charger */ + BATT_TRCKLE_CHGR /*!< Trickle charger (only available on mc13783) */ +} t_batt_charger; + +/*! + * This enumeration defines the bp threshold. + */ +typedef enum { + BATT_BP_0 = 0, /*!< LOBATL UVDET + 0.2 */ + BATT_BP_1, /*!< LOBATL UVDET + 0.3 */ + BATT_BP_2, /*!< LOBATL UVDET + 0.4 */ + BATT_BP_3 /*!< LOBATL UVDET + 0.5 */ +} t_bp_threshold; + +/*! + * This enumeration of all types of output controls + */ +typedef enum { + /*! + * controlled hardware + */ + CONTROL_HARDWARE = 0, + /*! + * BPFET is driven low, BATTFET is driven high + */ + CONTROL_BPFET_LOW, + /*! + * BPFET is driven high, BATTFET is driven low + */ + CONTROL_BPFET_HIGH, +} t_control; + +/*! + * This enumeration define all battery interrupt + */ +typedef enum { + /*! + * Charge detection interrupt + */ + BAT_IT_CHG_DET, + /*! + * Charge over voltage detection it + */ + BAT_IT_CHG_OVERVOLT, + /*! + * Charge path reverse current it + */ + BAT_IT_CHG_REVERSE, + /*! + * Charge path short circuitin revers supply mode it + */ + BAT_IT_CHG_SHORT_CIRCUIT, + /*! + * Charger has switched its mode (CC to CV or CV to CC) + */ + BAT_IT_CCCV, + /*! + * Charge current has dropped below its threshold + */ + BAT_IT_BELOW_THRESHOLD, +} t_batt_event; + +/*! + * This structure is used for the following battery changer control + * IOCTLs: + * - PMIC_BATT_CHARGER_CONTROL + * - PMIC_BATT_SET_CHARGER + * - PMIC_BATT_GET_CHARGER + */ +typedef struct { + /*! + * Charger + */ + t_batt_charger chgr; + /*! + * Turn on charger + */ + bool on; + /*! + * Charging voltage + */ + unsigned char c_voltage; + /*! + * Charging current + */ + unsigned char c_current; +} t_charger_setting; + +/*! + * This structure is used for EOL setting IOCTL PMIC_BATT_EOL_CONTROL + */ +typedef struct { + /*! + * Enable EOL comparator + */ + bool enable; + /*! + * c_voltage threshold - Used on SC55112 + */ + unsigned char threshold; + /*! + * bp threshold - Used on mc13783 + */ + t_bp_threshold typical; +} t_eol_setting; + +/* EXPORTED FUNCTIONS */ + +#ifdef __KERNEL__ + +/*START: for 3ds hw event*/ +/*! + * Battery event type enum + */ +enum { + BAT_EVENT_CHARGER_PLUG = 0x01, + BAT_EVENT_CHARGER_UNPLUG = 0x02, + BAT_EVENT_CHARGER_OVERVOLTAGE = 0x04, + BAT_EVENT_BATTERY_LOW = 0x08, + BAT_EVENT_POWER_FAILED = 0x10, + BAT_EVENT_CHARGER_FULL = 0x20, +} t_bat_event; +/*END: for 3ds hw event*/ + +/*! + * This function is used to start charging a battery. For different charger, + * different c_voltage and current range are supported. \n + * + * + * @param chgr Charger as defined in \b t_batt_charger. + * @param c_voltage Charging voltage. + * @param c_current Charging current. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_enable_charger(t_batt_charger chgr, + unsigned char c_voltage, + unsigned char c_current); + +/*! + * This function turns off a charger. + * + * @param chgr Charger as defined in \b t_batt_charger. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_disable_charger(t_batt_charger chgr); + +/*! + * This function is used to change the charger setting. + * + * @param chgr Charger as defined in \b t_batt_charger. + * @param c_voltage Charging voltage. + * @param c_current Charging current. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_set_charger(t_batt_charger chgr, + unsigned char c_voltage, + unsigned char c_current); + +/*! + * This function is used to retrieve the charger setting. + * + * @param chgr Charger as defined in \b t_batt_charger. + * @param c_voltage Output parameter for charging c_voltage setting. + * @param c_current Output parameter for charging current setting. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_get_charger_setting(t_batt_charger chgr, + unsigned char *c_voltage, + unsigned char *c_current); + +/*! + * This function is retrieves the main battery charging current. + * + * @param c_current Output parameter for charging current setting. + * + * @return This function returns PMIC_SUCCESS if successful. + */ + +PMIC_STATUS pmic_batt_get_charge_current(unsigned short *c_current); + +/*! + * This function enables End-of-Life comparator. + * + * @param threshold End-of-Life threshold. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_enable_eol(unsigned char threshold); + +/*! + * This function enables End-of-Life comparator. + * + * @param typical Falling Edge Threshold threshold. + * @verbatim + * BPDET UVDET LOBATL + * ____ _____ ___________ + * 0 2.6 UVDET + 0.2 + * 1 2.6 UVDET + 0.3 + * 2 2.6 UVDET + 0.4 + * 3 2.6 UVDET + 0.5 + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_bp_enable_eol(t_bp_threshold typical); + +/*! + * This function disables End-of-Life comparator. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_disable_eol(void); + +/*! + * This function sets the output controls. + * It sets the FETOVRD and FETCTRL bits of mc13783 + * + * @param control type of control. + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_batt_set_out_control(t_control control); + +/*! + * This function sets over voltage threshold. + * + * @param threshold value of over voltage threshold. + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_batt_set_threshold(int threshold); + +/*! + * This function controls charge LED. + * + * @param on If on is true, LED will be turned on, + * or otherwise, LED will be turned off. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_led_control(bool on); + +/*! + * This function sets reverse supply mode. + * + * @param enable If enable is true, reverse supply mode is enable, + * or otherwise, reverse supply mode is disabled. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_set_reverse_supply(bool enable); + +/*! + * This function sets unregulated charging mode on main battery. + * + * @param enable If enable is true, unregulated charging mode is + * enable, or otherwise, disabled. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_set_unregulated(bool enable); + +/*! + * This function sets a 5K pull down at CHRGRAW. + * To be used in the dual path charging configuration. + * + * @param enable If enable is true, 5k pull down is + * enable, or otherwise, disabled. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_batt_set_5k_pull(bool enable); + +/*! + * This function is used to subscribe on battery event IT. + * + * @param event type of event. + * @param callback event callback function. + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_batt_event_subscribe(t_batt_event event, void *callback); + +/*! + * This function is used to un subscribe on battery event IT. + * + * @param event type of event. + * @param callback event callback function. + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_batt_event_unsubscribe(t_batt_event event, void *callback); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_ARCH_MXC_PMIC_BATTERY_H__ */ diff --git a/include/linux/pmic_light.h b/include/linux/pmic_light.h new file mode 100644 index 000000000000..f26d927fed25 --- /dev/null +++ b/include/linux/pmic_light.h @@ -0,0 +1,1082 @@ +/* + * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU Lesser General + * Public License. You may obtain a copy of the GNU Lesser General + * Public License Version 2.1 or later at the following locations: + * + * http://www.opensource.org/licenses/lgpl-license.html + * http://www.gnu.org/copyleft/lgpl.html + */ +#ifndef __ASM_ARCH_MXC_PMIC_LIGHT_H__ +#define __ASM_ARCH_MXC_PMIC_LIGHT_H__ + +/*! + * @defgroup PMIC_LIGHT PMIC Light Driver + * @ingroup PMIC_DRVRS + */ + +/*! + * @file arch-mxc/pmic_light.h + * @brief This is the header of PMIC Light driver. + * + * @ingroup PMIC_LIGHT + */ + +#include +#include +#include + +/*! + * @name IOCTL user space interface + */ + +/*! @{ */ +/*! + * Enable Backlight. + * Argument type: none. + */ +#define PMIC_BKLIT_ENABLE _IO('p', 0xe0) +/*! + * Disable Backlight. + * Argument type: none. + */ +#define PMIC_BKLIT_DISABLE _IO('p', 0xe1) +/*! + * Set backlight configuration. + * Argument type: pointer to t_bklit_setting_param + */ +#define PMIC_SET_BKLIT _IOW('p', 0xe2, int) +/*! + * Get backlight configuration. + * Argument type: pointer to t_bklit_setting_param + */ +#define PMIC_GET_BKLIT _IOWR('p', 0xe3, int) +/*! + * Ramp up configuration. + * Argument type: t_bklit_channel + */ +#define PMIC_RAMPUP_BKLIT _IOW('p', 0xe4, int) +/*! + * Ramp down configuration. + * Argument type: t_bklit_channel + */ +#define PMIC_RAMPDOWN_BKLIT _IOW('p', 0xe5, int) +/*! + * Enable Tri-color LED. + * Argument type: t_tcled_enable_param + */ +#define PMIC_TCLED_ENABLE _IOW('p', 0xe6, int) +/*! + * Disable Tri-color LED. + * Argument type: t_funlight_bank + */ +#define PMIC_TCLED_DISABLE _IOW('p', 0xe7, int) +/*! + * Start Tri-color LED pattern. + * Argument type: t_fun_param + */ +#define PMIC_TCLED_PATTERN _IOW('p', 0xe8, int) +/*! + * Enable Backlight & tcled. + * Argument type: none. + */ +#define PMIC_BKLIT_TCLED_ENABLE _IO('p', 0xe9) +/*! + * Disable Backlight & tcled. + * Argument type: none. + */ +#define PMIC_BKLIT_TCLED_DISABLE _IO('p', 0xea) +/*! + * Reset ramp up configuration. + * Argument type: t_bklit_channel + */ +#define PMIC_OFF_RAMPUP_BKLIT _IOW('p', 0xeb, int) +/*! + * Reset ramp down configuration. + * Argument type: t_bklit_channel + */ +#define PMIC_OFF_RAMPDOWN_BKLIT _IOW('p', 0xec, int) +/*! + * Set tcled ind configuration. + * Argument type: t_tcled_ind_param + */ +#define PMIC_SET_TCLED _IOW('p', 0xed, int) +/*! + * Get tcled ind configuration. + * Argument type: t_tcled_ind_param + */ +#define PMIC_GET_TCLED _IOWR('p', 0xee, int) +/*! @} */ +/*! + * @enum t_bklit_mode + * @brief Backlight modes. + */ +typedef enum { + BACKLIGHT_CURRENT_CTRL_MODE, /*! < Current control mode */ + BACKLIGHT_TRIODE_MODE /*! < Triode mode */ +} t_bklit_mode; + +/*! + * @enum t_bklit_channel + * @brief Backlight channels. + */ +typedef enum { + BACKLIGHT_LED1, /*! < Backlight channel 1 */ + BACKLIGHT_LED2, /*! < Backlight channel 2 */ + BACKLIGHT_LED3 /*! < Backlight channel 3 */ +} t_bklit_channel; + +/*! + * @enum t_bklit_strobe_mode + * @brief Backlight Strobe Light Pulsing modes. + */ +typedef enum { + /*! + * No Strobe Light Pulsing + */ + BACKLIGHT_STROBE_NONE, + /*! + * Strobe Light Pulsing at 3.3% duty cycle over 300msec (Driver goes + * into Triode Mode with pulses constrained to 10msec.) + */ + BACKLIGHT_STROBE_FAST, + /*! + * Strobe Light Pulsing at 10% duty cycle over 100msec (Driver goes + * into Triode Mode with pulses constrained to 10msec.) + */ + BACKLIGHT_STROBE_SLOW +} t_bklit_strobe_mode; + +/*! + * @struct t_bklit_setting_param + * @brief Backlight setting. + */ + +typedef struct { + t_bklit_channel channel; /*!< Channel */ + t_bklit_mode mode; /*!< Mode */ + t_bklit_strobe_mode strobe; /*!< Strobe mode */ + unsigned char current_level; /*!< Current level */ + unsigned char duty_cycle; /*!< Duty cycle */ + unsigned char cycle_time; /*!< Cycle time */ + bool edge_slow; /*!< Edge Slow */ + bool en_dis; /*!< Enable disable boost mode */ + unsigned int abms; /*!< Adaptive boost + * mode selection */ + unsigned int abr; /*!< Adaptive + * boost reference */ +} t_bklit_setting_param; + +/*! + * @enum t_funlight_bank + * @brief Tri-color LED fun light banks. + */ +typedef enum { + TCLED_FUN_BANK1 = 0, /*! < Fun light bank 1 */ + TCLED_FUN_BANK2, /*! < Fun light bank 2 */ + TCLED_FUN_BANK3 /*! < Fun light bank 3 */ +} t_funlight_bank; + +/*! + * @enum t_tcled_mode + * @brief Tri-color LED operation modes. + * + * The Tri-Color LED Driver circuitry includes 2 modes of operation. In LED + * Indicator Mode, this circuitry operates as Red and Green LED Drivers with + * flasher timing to indicate GSM network status. In Fun Light Mode, this + * circuitry provides expanded capability for current control and distribution + * that supplements the three channels. + */ +typedef enum { + TCLED_IND_MODE = 0, /*! < LED Indicator Mode */ + TCLED_FUN_MODE /*! < Fun Light Mode */ +} t_tcled_mode; + +/*! + * @struct t_tcled_enable_param + * @brief enable setting. + */ +typedef struct { + t_funlight_bank bank; /*!< Bank */ + t_tcled_mode mode; /*!< Mode */ +} t_tcled_enable_param; + +/*! + * @enum t_ind_channel + * @brief Tri-color LED indicator mode channels. + * + */ + +typedef enum { + TCLED_IND_RED = 0, /*! < Red LED */ + TCLED_IND_GREEN, /*! < Green LED */ + TCLED_IND_BLUE /*! < Blue LED */ +} t_ind_channel; + +/*! + * @enum t_funlight_channel + * @brief Tri-color LED fun light mode channels. + * + */ +typedef enum { + TCLED_FUN_CHANNEL1 = 0, /*! < Fun light channel 1 (Red) */ + TCLED_FUN_CHANNEL2, /*! < Fun light channel 2 (Green) */ + TCLED_FUN_CHANNEL3 /*! < Fun light channel 3 (Blue) */ +} t_funlight_channel; + +/*! + * @enum t_tcled_ind_blink_pattern + * @brief Tri-color LED Indicator Mode blinking mode. + */ +typedef enum { + TCLED_IND_OFF = 0, /*! < Continuous off */ + TCLED_IND_BLINK_1, /*! < 1 / 31 */ + TCLED_IND_BLINK_2, /*! < 2 / 31 */ + TCLED_IND_BLINK_3, /*! < 3 / 31 */ + TCLED_IND_BLINK_4, /*! < 4 / 31 */ + TCLED_IND_BLINK_5, /*! < 5 / 31 */ + TCLED_IND_BLINK_6, /*! < 6 / 31 */ + TCLED_IND_BLINK_7, /*! < 7 / 31 */ + TCLED_IND_BLINK_8, /*! < 8 / 31 */ + TCLED_IND_BLINK_9, /*! < 9 / 31 */ + TCLED_IND_BLINK_10, /*! < 10 / 31 */ + TCLED_IND_BLINK_11, /*! < 11 / 31 */ + TCLED_IND_BLINK_12, /*! < 12 / 31 */ + TCLED_IND_BLINK_13, /*! < 13 / 31 */ + TCLED_IND_BLINK_14, /*! < 14 / 31 */ + TCLED_IND_BLINK_15, /*! < 15 / 31 */ + TCLED_IND_BLINK_16, /*! < 16 / 31 */ + TCLED_IND_BLINK_17, /*! < 17 / 31 */ + TCLED_IND_BLINK_18, /*! < 18 / 31 */ + TCLED_IND_BLINK_19, /*! < 19 / 31 */ + TCLED_IND_BLINK_20, /*! < 20 / 31 */ + TCLED_IND_BLINK_21, /*! < 21 / 31 */ + TCLED_IND_BLINK_22, /*! < 22 / 31 */ + TCLED_IND_BLINK_23, /*! < 23 / 31 */ + TCLED_IND_BLINK_24, /*! < 24 / 31 */ + TCLED_IND_BLINK_25, /*! < 25 / 31 */ + TCLED_IND_BLINK_26, /*! < 26 / 31 */ + TCLED_IND_BLINK_27, /*! < 27 / 31 */ + TCLED_IND_BLINK_28, /*! < 28 / 31 */ + TCLED_IND_BLINK_29, /*! < 29 / 31 */ + TCLED_IND_BLINK_30, /*! < 30 / 31 */ + TCLED_IND_ON /*! < Continuous on */ +} t_tcled_ind_blink_pattern; + +/*! + * @enum t_tcled_cur_level + * @brief Tri-color LED current levels. + */ +typedef enum { + TCLED_CUR_LEVEL_1 = 0, /*! < Tri-Color LED current level 1 */ + TCLED_CUR_LEVEL_2, /*! < Tri-Color LED current level 2 */ + TCLED_CUR_LEVEL_3, /*! < Tri-Color LED current level 3 */ + TCLED_CUR_LEVEL_4 /*! < Tri-Color LED current level 4 */ +} t_tcled_cur_level; + +/*! + * @enum t_tcled_fun_cycle_time + * @brief Tri-color LED fun light mode cycle time. + */ +typedef enum { + TC_CYCLE_TIME_1 = 0, /*! < Tri-Color LED cycle time 1 */ + TC_CYCLE_TIME_2, /*! < Tri-Color LED cycle time 2 */ + TC_CYCLE_TIME_3, /*! < Tri-Color LED cycle time 3 */ + TC_CYCLE_TIME_4 /*! < Tri-Color LED cycle time 4 */ +} t_tcled_fun_cycle_time; + +/*! + * @enum t_tcled_fun_speed + * @brief Tri-color LED fun light mode pattern speed. + */ +typedef enum { + TC_OFF = 0, /*! < Tri-Color pattern off */ + TC_SLOW, /*! < Tri-Color slow pattern */ + TC_FAST /*! < Tri-Color fast pattern */ +} t_tcled_fun_speed; + +/*! + * @enum t_tcled_fun_speed + * @brief Tri-color LED fun light mode pattern speed. + */ +typedef enum { + TC_STROBE_OFF = 0, /*! < No strobe */ + TC_STROBE_SLOW, /*! < Slow strobe pattern */ + TC_STROBE_FAST /*! < fast strobe pattern */ +} t_tcled_fun_strobe_speed; + +/*! + * @enum t_chaselight_pattern + * @brief Tri-color LED fun light mode chasing light patterns. + */ +typedef enum { + PMIC_RGB = 0, /*!< R -> G -> B */ + BGR /*!< B -> G -> R */ +} t_chaselight_pattern; + +/*! + * This enumeration of Fun Light Pattern. + */ +typedef enum { + /*! + * Blended ramps slow + */ + BLENDED_RAMPS_SLOW, + /*! + * Blended ramps fast + */ + BLENDED_RAMPS_FAST, + /*! + * Saw ramps slow + */ + SAW_RAMPS_SLOW, + /*! + * Saw ramps fast + */ + SAW_RAMPS_FAST, + /*! + * Blended bowtie slow + */ + BLENDED_BOWTIE_SLOW, + /*! + * Blended bowtie fast + */ + BLENDED_BOWTIE_FAST, + /*! + * Strobe slow + */ + STROBE_SLOW, + /*! + * Strobe fast + */ + STROBE_FAST, + /*! + * Chasing Light RGB Slow + */ + CHASING_LIGHT_RGB_SLOW, + /*! + * Chasing Light RGB fast + */ + CHASING_LIGHT_RGB_FAST, + /*! + * Chasing Light BGR Slow + */ + CHASING_LIGHT_BGR_SLOW, + /*! + * Chasing Light BGR fast + */ + CHASING_LIGHT_BGR_FAST, +} t_fun_pattern; + +/*! + * @struct t_fun_param + * @brief LED fun pattern IOCTL parameter + */ +typedef struct { + t_funlight_bank bank; /*!< TCLED bank */ + t_funlight_channel channel; /*!< TCLED channel */ + t_fun_pattern pattern; /*!< Fun pattern */ +} t_fun_param; + +/*! + * @enum t_led_channel + * @brief LED channels including backlight and tri-color LEDs. + */ +typedef enum { + AUDIO_LED1, /*! < Backlight channel 1 */ + AUDIO_LED2, /*! < Backlight channel 2 */ + AUDIO_LEDR, /*! < Fun light channel 1 (Red) */ + AUDIO_LEDG, /*! < Fun light channel 2 (Green) */ + AUDIO_LEDB /*! < Fun light channel 3 (Blue) */ +} t_led_channel; + +/*! + * @enum t_aud_path + * @brief LED audio modulation in-out audio channels + */ +typedef enum { + MIXED_RX = 0, /*!< Mixed L & R Channel RX audio */ + TX /*!< TX path */ +} t_aud_path; + +/*! + * @enum t_aud_gain + * @brief LED audio modulation in-out audio channels + */ +typedef enum { + GAIN_MINUS6DB = 0, /*!< -6 dB */ + GAIN_0DB, /*!< 0 dB */ + GAIN_6DB, /*!< 6 dB */ + GAIN_12DB /*!< 12 dB */ +} t_aud_gain; + +/*! + * @struct t_tcled_ind_param + * @brief LED parameter + */ +typedef struct { + t_funlight_bank bank; /*! < tcled bank */ + t_ind_channel channel; /*! < tcled channel */ + t_tcled_cur_level level; /*! < tcled current level */ + t_tcled_ind_blink_pattern pattern; /*! < tcled dutty cycle */ + bool skip; /*! < tcled skip */ + bool rampup; /*! < tcled rampup */ + bool rampdown; /*! < tcled rampdown */ + bool half_current; /*! < tcled half current */ +} t_tcled_ind_param; + +#if defined(CONFIG_MXC_PMIC_MC13892) + +enum curr_level { + LIT_CURR_0 = 0, + LIT_CURR_3, + LIT_CURR_6, + LIT_CURR_9, + LIT_CURR_12, + LIT_CURR_15, + LIT_CURR_18, + LIT_CURR_21, + /* below setting only used for main/aux/keypad */ + LIT_CURR_HI_0, + LIT_CURR_HI_6, + LIT_CURR_HI_12, + LIT_CURR_HI_18, + LIT_CURR_HI_24, + LIT_CURR_HI_30, + LIT_CURR_HI_36, + LIT_CURR_HI_42, +}; + +enum lit_channel { + LIT_MAIN = 0, + LIT_AUX, + LIT_KEY, + LIT_RED, + LIT_GREEN, + LIT_BLUE, +}; + +#endif + +/* EXPORTED FUNCTIONS */ +#ifdef __KERNEL__ +/*! + * This function enables backlight & tcled. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_tcled_master_enable(void); + +/*! + * This function disables backlight & tcled. + * + * @return This function returns PMIC_SUCCESS if successful + */ +PMIC_STATUS pmic_bklit_tcled_master_disable(void); + +/*! + * This function enables backlight. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_master_enable(void); + +/*! + * This function disables backlight. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_master_disable(void); + +/*! + * This function sets backlight current level. + * + * @param channel Backlight channel + * @param level Backlight current level, as the following table. + * @verbatim + * level current + * ------ ----------- + * 0 0 mA + * 1 12 mA + * 2 24 mA + * 3 36 mA + * 4 48 mA + * 5 60 mA + * 6 72 mA + * 7 84 mA + * @endverbatim + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_set_current(t_bklit_channel channel, + unsigned char level); + +/*! + * This function retrives backlight current level. + * + * @param channel Backlight channel + * @param level Pointer to store backlight current level result. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_get_current(t_bklit_channel channel, + unsigned char *level); + +/*! + * This function sets a backlight channel duty cycle. + * LED perceived brightness for each zone may be individually set by setting + * duty cycle. The default setting is for 0% duty cycle; this keeps all zone + * drivers turned off even after the master enable command. Each LED current + * sink can be turned on and adjusted for brightness with an independent 4 bit + * word for a duty cycle ranging from 0% to 100% in approximately 6.7% steps. + * + * @param channel Backlight channel. + * @param dc Backlight duty cycle, as the following table. + * @verbatim + * dc Duty Cycle (% On-time over Cycle Time) + * ------ --------------------------------------- + * 0 0% + * 1 6.7% + * 2 13.3% + * 3 20% + * 4 26.7% + * 5 33.3% + * 6 40% + * 7 46.7% + * 8 53.3% + * 9 60% + * 10 66.7% + * 11 73.3% + * 12 80% + * 13 86.7% + * 14 93.3% + * 15 100% + * @endverbatim + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_set_dutycycle(t_bklit_channel channel, unsigned char dc); + +/*! + * This function retrives a backlight channel duty cycle. + * + * @param channel Backlight channel. + * @param cycle Pointer to backlight duty cycle. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_get_dutycycle(t_bklit_channel channel, + unsigned char *dc); + +/*! + * This function sets a backlight channel cycle time. + * Cycle Time is defined as the period of a complete cycle of + * Time_on + Time_off. The default Cycle Time is set to 0.01 seconds such that + * the 100 Hz on-off cycling is averaged out by the eye to eliminate + * flickering. Additionally, the Cycle Time can be programmed to intentionally + * extend the period of on-off cycles for a visual pulsating or blinking effect. + * + * @param period Backlight cycle time, as the following table. + * @verbatim + * period Cycle Time + * -------- ------------ + * 0 0.01 seconds + * 1 0.1 seconds + * 2 0.5 seconds + * 3 2 seconds + * @endverbatim + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_set_cycle_time(unsigned char period); + +/*! + * This function retrives a backlight channel cycle time setting. + * + * @param period Pointer to save backlight cycle time setting result. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_get_cycle_time(unsigned char *period); + +/*! + * This function sets backlight operation mode. There are two modes of + * operations: current control and triode mode. + * The Duty Cycle/Cycle Time control is retained in Triode Mode. Audio + * coupling is not available in Triode Mode. + * + * @param channel Backlight channel. + * @param mode Backlight operation mode. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_set_mode(t_bklit_channel channel, t_bklit_mode mode); +/*! + * This function gets backlight operation mode. There are two modes of + * operations: current control and triode mode. + * The Duty Cycle/Cycle Time control is retained in Triode Mode. Audio + * coupling is not available in Triode Mode. + * + * @param channel Backlight channel. + * @param mode Backlight operation mode. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_get_mode(t_bklit_channel channel, t_bklit_mode *mode); +/*! + * This function starts backlight brightness ramp up function; ramp time is + * fixed at 0.5 seconds. + * + * @param channel Backlight channel. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_rampup(t_bklit_channel channel); +/*! + * This function stops backlight brightness ramp up function; + * + * @param channel Backlight channel. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_off_rampup(t_bklit_channel channel); +/*! + * This function starts backlight brightness ramp down function; ramp time is + * fixed at 0.5 seconds. + * + * @param channel Backlight channel. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_rampdown(t_bklit_channel channel); +/*! + * This function stops backlight brightness ramp down function. + * + * @param channel Backlight channel. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_off_rampdown(t_bklit_channel channel); +/*! + * This function enables backlight analog edge slowing mode. Analog Edge + * Slowing slows down the transient edges to reduce the chance of coupling LED + * modulation activity into other circuits. Rise and fall times will be targeted + * for approximately 50usec. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_enable_edge_slow(void); + +/*! + * This function disables backlight analog edge slowing mode. The backlight + * drivers will default to an Instant On mode. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_disable_edge_slow(void); +/*! + * This function gets backlight analog edge slowing mode. DThe backlight + * + * @param edge Edge slowing mode. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_get_edge_slow(bool *edge); +/*! + * This function sets backlight Strobe Light Pulsing mode. + * + * @param channel Backlight channel. + * @param mode Strobe Light Pulsing mode. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_bklit_set_strobemode(t_bklit_channel channel, + t_bklit_strobe_mode mode); + +/*! + * This function enables tri-color LED. + * + * @param mode Tri-color LED operation mode. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_enable(t_tcled_mode mode, t_funlight_bank bank); +/*! + * This function disables tri-color LED. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_disable(t_funlight_bank bank); +/*! + * This function retrives tri-color LED operation mode. + * + * @param mode Pointer to Tri-color LED operation mode. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_get_mode(t_tcled_mode *mode, t_funlight_bank bank); +/*! + * This function sets a tri-color LED channel current level in indicator mode. + * + * @param channel Tri-color LED channel. + * @param level Current level. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_ind_set_current(t_ind_channel channel, + t_tcled_cur_level level, + t_funlight_bank bank); +/*! + * This function retrives a tri-color LED channel current level in indicator mode. + * + * @param channel Tri-color LED channel. + * @param level Pointer to current level. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_ind_get_current(t_ind_channel channel, + t_tcled_cur_level *level, + t_funlight_bank bank); +/*! + * This function sets a tri-color LED channel blinking pattern in indication + * mode. + * + * @param channel Tri-color LED channel. + * @param pattern Blinking pattern. + * @param skip If true, skip a cycle after each cycle. + * + * @return This function returns PMIC_SUCCESS if successful. + */ + +PMIC_STATUS pmic_tcled_ind_set_blink_pattern(t_ind_channel channel, + t_tcled_ind_blink_pattern pattern, + bool skip, t_funlight_bank bank); +/*! + * This function retrives a tri-color LED channel blinking pattern in + * indication mode. + * + * @param channel Tri-color LED channel. + * @param pattern Pointer to Blinking pattern. + * @param skip Pointer to a boolean variable indicating if skip + * a cycle after each cycle. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_ind_get_blink_pattern(t_ind_channel channel, + t_tcled_ind_blink_pattern * + pattern, bool *skip, + t_funlight_bank bank); +/*! + * This function sets a tri-color LED channel current level in Fun Light mode. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param level Current level. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_set_current(t_funlight_bank bank, + t_funlight_channel channel, + t_tcled_cur_level level); + +/*! + * This function retrives a tri-color LED channel current level + * in Fun Light mode. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param level Pointer to current level. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_get_current(t_funlight_bank bank, + t_funlight_channel channel, + t_tcled_cur_level *level); + +/*! + * This function sets tri-color LED cycle time in Fun Light mode. + * + * @param bank Tri-color LED bank + * @param ct Cycle time. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_set_cycletime(t_funlight_bank bank, + t_tcled_fun_cycle_time ct); + +/*! + * This function retrives tri-color LED cycle time in Fun Light mode. + * + * @param bank Tri-color LED bank + * @param ct Pointer to cycle time. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_get_cycletime(t_funlight_bank bank, + t_tcled_fun_cycle_time *ct); + +/*! + * This function sets a tri-color LED channel duty cycle in Fun Light mode. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param dc Duty cycle. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_set_dutycycle(t_funlight_bank bank, + t_funlight_channel channel, + unsigned char dc); + +/*! + * This function retrives a tri-color LED channel duty cycle in Fun Light mode. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param dc Pointer to duty cycle. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_get_dutycycle(t_funlight_bank bank, + t_funlight_channel channel, + unsigned char *dc); + +/*! + * This function initiates Blended Ramp fun light pattern. + * + * @param bank Tri-color LED bank + * @param speed Speed of pattern. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_blendedramps(t_funlight_bank bank, + t_tcled_fun_speed speed); + +/*! + * This function initiates Saw Ramp fun light pattern. + * + * @param bank Tri-color LED bank + * @param speed Speed of pattern. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_sawramps(t_funlight_bank bank, + t_tcled_fun_speed speed); + +/*! + * This function initiates Blended Bowtie fun light pattern. + * + * @param bank Tri-color LED bank + * @param speed Speed of pattern. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_blendedbowtie(t_funlight_bank bank, + t_tcled_fun_speed speed); + +/*! + * This function initiates Chasing Lights fun light pattern. + * + * @param bank Tri-color LED bank + * @param pattern Chasing light pattern mode. + * @param speed Speed of pattern. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_chasinglightspattern(t_funlight_bank bank, + t_chaselight_pattern pattern, + t_tcled_fun_speed speed); + +/*! + * This function initiates Strobe Mode fun light pattern. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param speed Speed of pattern. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_strobe(t_funlight_bank bank, + t_funlight_channel channel, + t_tcled_fun_strobe_speed speed); + +/*! + * This function initiates Tri-color LED brightness Ramp Up function; Ramp time + * is fixed at 1 second. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param rampup Ramp-up configuration. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_rampup(t_funlight_bank bank, + t_funlight_channel channel, bool rampup); +/*! + * This function gets Tri-color LED brightness Ramp Up function; Ramp time + * is fixed at 1 second. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param rampup Ramp-up configuration. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_get_fun_rampup(t_funlight_bank bank, + t_funlight_channel channel, + bool *rampup); + +/*! + * This function initiates Tri-color LED brightness Ramp Down function; Ramp + * time is fixed at 1 second. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param rampdown Ramp-down configuration. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_rampdown(t_funlight_bank bank, + t_funlight_channel channel, bool rampdown); +/*! + * This function initiates Tri-color LED brightness Ramp Down function; Ramp + * time is fixed at 1 second. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * @param rampdown Ramp-down configuration. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_get_fun_rampdown(t_funlight_bank bank, + t_funlight_channel channel, + bool *rampdown); + +/*! + * This function enables a Tri-color channel triode mode. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_triode_on(t_funlight_bank bank, + t_funlight_channel channel); + +/*! + * This function disables a Tri-color LED channel triode mode. + * + * @param bank Tri-color LED bank + * @param channel Tri-color LED channel. + * + * @return This function returns PMIC_SUCCESS if successful. + */ +PMIC_STATUS pmic_tcled_fun_triode_off(t_funlight_bank bank, + t_funlight_channel channel); + +/*! + * This function enables Tri-color LED edge slowing. + * + * @return This function returns PMIC_NOT_SUPPORTED. + */ +PMIC_STATUS pmic_tcled_enable_edge_slow(void); + +/*! + * This function disables Tri-color LED edge slowing. + * + * @return This function returns PMIC_NOT_SUPPORTED. + */ +PMIC_STATUS pmic_tcled_disable_edge_slow(void); + +/*! + * This function enables Tri-color LED half current mode. + * + * @return This function returns PMIC_NOT_SUPPORTED. + */ +PMIC_STATUS pmic_tcled_enable_half_current(void); + +/*! + * This function disables Tri-color LED half current mode. + * + * @return This function returns PMIC_NOT_SUPPORTED. + */ +PMIC_STATUS pmic_tcled_disable_half_current(void); + +/*! + * This function enables backlight or Tri-color LED audio modulation. + * + * @return This function returns PMIC_NOT_SUPPORTED. + */ +PMIC_STATUS pmic_tcled_enable_audio_modulation(t_led_channel channel, + t_aud_path path, + t_aud_gain gain, + bool lpf_bypass); + +/*! + * This function disables backlight or Tri-color LED audio modulation. + * + * @return This function returns PMIC_NOT_SUPPORTED. + */ +PMIC_STATUS pmic_tcled_disable_audio_modulation(void); +/*! + * This function enables the boost mode. + * Only on mc13783 2.0 or higher + * + * @param en_dis Enable or disable the boost mode + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_bklit_set_boost_mode(bool en_dis); + +/*! + * This function gets the boost mode. + * Only on mc13783 2.0 or higher + * + * @param en_dis Enable or disable the boost mode + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_bklit_get_boost_mode(bool *en_dis); + +/*! + * This function sets boost mode configuration + * Only on mc13783 2.0 or higher + * + * @param abms Define adaptive boost mode selection + * @param abr Define adaptive boost reference + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_bklit_config_boost_mode(unsigned int abms, unsigned int abr); + +/*! + * This function gets boost mode configuration + * Only on mc13783 2.0 or higher + * + * @param abms Define adaptive boost mode selection + * @param abr Define adaptive boost reference + * + * @return This function returns 0 if successful. + */ +PMIC_STATUS pmic_bklit_gets_boost_mode(unsigned int *abms, unsigned int *abr); + +#if defined(CONFIG_MXC_PMIC_MC13892) + +PMIC_STATUS mc13892_bklit_set_current(enum lit_channel channel, + unsigned char level); +PMIC_STATUS mc13892_bklit_get_current(enum lit_channel channel, + unsigned char *level); +PMIC_STATUS mc13892_bklit_set_dutycycle(enum lit_channel channel, + unsigned char dc); +PMIC_STATUS mc13892_bklit_get_dutycycle(enum lit_channel channel, + unsigned char *dc); +PMIC_STATUS mc13892_bklit_set_ramp(enum lit_channel channel, int flag); +PMIC_STATUS mc13892_bklit_get_ramp(enum lit_channel channel, int *flag); +PMIC_STATUS mc13892_bklit_set_blink_p(enum lit_channel channel, int period); +PMIC_STATUS mc13892_bklit_get_blink_p(enum lit_channel channel, int *period); + +#endif + +#endif /* __KERNEL__ */ + +#endif /* __ASM_ARCH_MXC_PMIC_LIGHT_H__ */ diff --git a/include/linux/pmic_rtc.h b/include/linux/pmic_rtc.h new file mode 100644 index 000000000000..f0d87423f568 --- /dev/null +++ b/include/linux/pmic_rtc.h @@ -0,0 +1,153 @@ +/* + * Copyright 2004-2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * The code contained herein is licensed under the GNU Lesser General + * Public License. You may obtain a copy of the GNU Lesser General + * Public License Version 2.1 or later at the following locations: + * + * http://www.opensource.org/licenses/lgpl-license.html + * http://www.gnu.org/copyleft/lgpl.html + */ + +#ifndef __ASM_ARCH_MXC_PMIC_RTC_H__ +#define __ASM_ARCH_MXC_PMIC_RTC_H__ + +/*! + * @defgroup PMIC_RTC PMIC RTC Driver + * @ingroup PMIC_DRVRS + */ + +/*! + * @file arch-mxc/pmic_rtc.h + * @brief This is the header of PMIC RTC driver. + * + * @ingroup PMIC_RTC + */ + +/* + * Includes + */ +#include +#include +#include + +#define PMIC_RTC_SET_TIME _IOWR('p', 0xd1, int) +#define PMIC_RTC_GET_TIME _IOWR('p', 0xd2, int) +#define PMIC_RTC_SET_ALARM _IOWR('p', 0xd3, int) +#define PMIC_RTC_GET_ALARM _IOWR('p', 0xd4, int) +#define PMIC_RTC_WAIT_ALARM _IOWR('p', 0xd5, int) +#define PMIC_RTC_ALARM_REGISTER _IOWR('p', 0xd6, int) +#define PMIC_RTC_ALARM_UNREGISTER _IOWR('p', 0xd7, int) + +/*! + * This enumeration define all RTC interrupt + */ +typedef enum { + /*! + * Time of day alarm + */ + RTC_IT_ALARM, + /*! + * 1 Hz timetick + */ + RTC_IT_1HZ, + /*! + * RTC reset occurred + */ + RTC_IT_RST, +} t_rtc_int; + +/* + * RTC PMIC API + */ + +/* EXPORTED FUNCTIONS */ +#ifdef __KERNEL__ + +/*! + * This function set the real time clock of PMIC + * + * @param pmic_time value of date and time + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_set_time(struct timeval *pmic_time); + +/*! + * This function get the real time clock of PMIC + * + * @param pmic_time return value of date and time + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_get_time(struct timeval *pmic_time); + +/*! + * This function set the real time clock alarm of PMIC + * + * @param pmic_time value of date and time + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_set_time_alarm(struct timeval *pmic_time); + +/*! + * This function get the real time clock alarm of PMIC + * + * @param pmic_time return value of date and time + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_get_time_alarm(struct timeval *pmic_time); + +/*! + * This function wait the Alarm event + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_wait_alarm(void); + +/*! + * This function is used to un/subscribe on RTC event IT. + * + * @param event type of event. + * @param callback event callback function. + * @param sub define if Un/subscribe event. + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_event(t_rtc_int event, void *callback, bool sub); + +/*! + * This function is used to subscribe on RTC event IT. + * + * @param event type of event. + * @param callback event callback function. + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_event_sub(t_rtc_int event, void *callback); + +/*! + * This function is used to un-subscribe on RTC event IT. + * + * @param event type of event. + * @param callback event callback function. + * + * @return This function returns PMIC_STATUS if successful. + */ +PMIC_STATUS pmic_rtc_event_unsub(t_rtc_int event, void *callback); + +/*! + * This function is used to tell if PMIC RTC has been correctly loaded. + * + * @return This function returns 1 if RTC was successfully loaded + * 0 otherwise. + */ +int pmic_rtc_loaded(void); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_ARCH_MXC_PMIC_RTC_H__ */ diff --git a/include/linux/pxp_dma.h b/include/linux/pxp_dma.h new file mode 100644 index 000000000000..f78e56003753 --- /dev/null +++ b/include/linux/pxp_dma.h @@ -0,0 +1,223 @@ +/* + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef _PXP_DMA +#define _PXP_DMA + +#include + +#ifndef __KERNEL__ +typedef unsigned long dma_addr_t; +typedef unsigned char bool; +#endif + +/* PXP Pixel format definitions */ +/* Four-character-code (FOURCC) */ +#define fourcc(a, b, c, d)\ + (((__u32)(a)<<0)|((__u32)(b)<<8)|((__u32)(c)<<16)|((__u32)(d)<<24)) + +/*! + * @name PXP Pixel Formats + * + * Pixel formats are defined with ASCII FOURCC code. The pixel format codes are + * the same used by V4L2 API. + */ + +/*! @} */ +/*! @name RGB Formats */ +/*! @{ */ +#define PXP_PIX_FMT_RGB332 fourcc('R', 'G', 'B', '1') /*!< 8 RGB-3-3-2 */ +#define PXP_PIX_FMT_RGB555 fourcc('R', 'G', 'B', 'O') /*!< 16 RGB-5-5-5 */ +#define PXP_PIX_FMT_RGB565 fourcc('R', 'G', 'B', 'P') /*!< 1 6 RGB-5-6-5 */ +#define PXP_PIX_FMT_RGB666 fourcc('R', 'G', 'B', '6') /*!< 18 RGB-6-6-6 */ +#define PXP_PIX_FMT_BGR666 fourcc('B', 'G', 'R', '6') /*!< 18 BGR-6-6-6 */ +#define PXP_PIX_FMT_BGR24 fourcc('B', 'G', 'R', '3') /*!< 24 BGR-8-8-8 */ +#define PXP_PIX_FMT_RGB24 fourcc('R', 'G', 'B', '3') /*!< 24 RGB-8-8-8 */ +#define PXP_PIX_FMT_BGR32 fourcc('B', 'G', 'R', '4') /*!< 32 BGR-8-8-8-8 */ +#define PXP_PIX_FMT_BGRA32 fourcc('B', 'G', 'R', 'A') /*!< 32 BGR-8-8-8-8 */ +#define PXP_PIX_FMT_RGB32 fourcc('R', 'G', 'B', '4') /*!< 32 RGB-8-8-8-8 */ +#define PXP_PIX_FMT_RGBA32 fourcc('R', 'G', 'B', 'A') /*!< 32 RGB-8-8-8-8 */ +#define PXP_PIX_FMT_ABGR32 fourcc('A', 'B', 'G', 'R') /*!< 32 ABGR-8-8-8-8 */ +/*! @} */ +/*! @name YUV Interleaved Formats */ +/*! @{ */ +#define PXP_PIX_FMT_YUYV fourcc('Y', 'U', 'Y', 'V') /*!< 16 YUV 4:2:2 */ +#define PXP_PIX_FMT_UYVY fourcc('U', 'Y', 'V', 'Y') /*!< 16 YUV 4:2:2 */ +#define PXP_PIX_FMT_Y41P fourcc('Y', '4', '1', 'P') /*!< 12 YUV 4:1:1 */ +#define PXP_PIX_FMT_YUV444 fourcc('Y', '4', '4', '4') /*!< 24 YUV 4:4:4 */ +/* two planes -- one Y, one Cb + Cr interleaved */ +#define PXP_PIX_FMT_NV12 fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ +/*! @} */ +/*! @name YUV Planar Formats */ +/*! @{ */ +#define PXP_PIX_FMT_GREY fourcc('G', 'R', 'E', 'Y') /*!< 8 Greyscale */ +#define PXP_PIX_FMT_YVU410P fourcc('Y', 'V', 'U', '9') /*!< 9 YVU 4:1:0 */ +#define PXP_PIX_FMT_YUV410P fourcc('Y', 'U', 'V', '9') /*!< 9 YUV 4:1:0 */ +#define PXP_PIX_FMT_YVU420P fourcc('Y', 'V', '1', '2') /*!< 12 YVU 4:2:0 */ +#define PXP_PIX_FMT_YUV420P fourcc('I', '4', '2', '0') /*!< 12 YUV 4:2:0 */ +#define PXP_PIX_FMT_YUV420P2 fourcc('Y', 'U', '1', '2') /*!< 12 YUV 4:2:0 */ +#define PXP_PIX_FMT_YVU422P fourcc('Y', 'V', '1', '6') /*!< 16 YVU 4:2:2 */ +#define PXP_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*!< 16 YUV 4:2:2 */ +/*! @} */ + +#define PXP_LUT_NONE 0x0 +#define PXP_LUT_INVERT 0x1 +#define PXP_LUT_BLACK_WHITE 0x2 + +#define NR_PXP_VIRT_CHANNEL 16 + +#define PXP_IOC_MAGIC 'P' + +#define PXP_IOC_GET_CHAN _IOR(PXP_IOC_MAGIC, 0, struct pxp_mem_desc) +#define PXP_IOC_PUT_CHAN _IOW(PXP_IOC_MAGIC, 1, struct pxp_mem_desc) +#define PXP_IOC_CONFIG_CHAN _IOW(PXP_IOC_MAGIC, 2, struct pxp_mem_desc) +#define PXP_IOC_START_CHAN _IOW(PXP_IOC_MAGIC, 3, struct pxp_mem_desc) +#define PXP_IOC_GET_PHYMEM _IOWR(PXP_IOC_MAGIC, 4, struct pxp_mem_desc) +#define PXP_IOC_PUT_PHYMEM _IOW(PXP_IOC_MAGIC, 5, struct pxp_mem_desc) +#define PXP_IOC_WAIT4CMPLT _IOWR(PXP_IOC_MAGIC, 6, struct pxp_mem_desc) + +/* Order significant! */ +enum pxp_channel_status { + PXP_CHANNEL_FREE, + PXP_CHANNEL_INITIALIZED, + PXP_CHANNEL_READY, +}; + +struct rect { + int top; /* Upper left coordinate of rectangle */ + int left; + int width; + int height; +}; + +struct pxp_layer_param { + unsigned short width; + unsigned short height; + unsigned int pixel_fmt; + + /* layers combining parameters + * (these are ignored for S0 and output + * layers, and only apply for OL layer) + */ + bool combine_enable; + __u32 color_key_enable; + __u32 color_key; + bool global_alpha_enable; + __u8 global_alpha; + bool local_alpha_enable; + + dma_addr_t paddr; +}; + +struct pxp_proc_data { + /* S0 Transformation Info */ + int scaling; + int hflip; + int vflip; + int rotate; + int yuv; + + /* Source rectangle (srect) defines the sub-rectangle + * within S0 to undergo processing. + */ + struct rect srect; + /* Dest rect (drect) defines how to position the processed + * source rectangle (after resizing) within the output frame, + * whose dimensions are defined in pxp->pxp_conf_state.out_param + */ + struct rect drect; + + /* Current S0 configuration */ + __u32 bgcolor; + + /* Output overlay support */ + int overlay_state; + + /* LUT transformation on Y data */ + int lut_transform; +}; + +struct pxp_config_data { + struct pxp_layer_param s0_param; + struct pxp_layer_param ol_param[8]; + struct pxp_layer_param out_param; + struct pxp_proc_data proc_data; + int layer_nr; + + /* Users don't touch */ + int chan_id; +}; + +struct pxp_mem_desc { + __u32 size; + dma_addr_t phys_addr; + __u32 cpu_addr; /* cpu address to free the dma mem */ + __u32 virt_uaddr; /* virtual user space address */ +}; + +#ifdef __KERNEL__ + +struct pxp_tx_desc { + struct dma_async_tx_descriptor txd; + struct list_head tx_list; + struct list_head list; + int len; + union { + struct pxp_layer_param s0_param; + struct pxp_layer_param out_param; + struct pxp_layer_param ol_param; + } layer_param; + struct pxp_proc_data proc_data; + + u32 hist_status; /* Histogram output status */ + + struct pxp_tx_desc *next; +}; + +struct pxp_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + enum pxp_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct pxp_tx_desc *desc; /* allocated tx-descriptors */ + struct list_head active_list; /* active tx-descriptors */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + struct list_head list; /* track queued channel number */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +struct pxp_irq_info { + wait_queue_head_t waitq; + int irq_pending; + int hist_status; +}; + +#define to_tx_desc(tx) container_of(tx, struct pxp_tx_desc, txd) +#define to_pxp_channel(d) container_of(d, struct pxp_channel, dma_chan) + +void pxp_txd_ack(struct dma_async_tx_descriptor *txd, + struct pxp_channel *pxp_chan); +#endif + +#endif