From: Felipe Balbi Date: Mon, 23 Jan 2017 12:19:58 +0000 (+0200) Subject: usb: xhci: add quirk flag for broken PED bits X-Git-Tag: v4.11-rc1~119^2~72 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=41135de1e7fd14c6fcb9158404ba5c8fb97bf259;p=karo-tx-linux.git usb: xhci: add quirk flag for broken PED bits Some devices from Texas Instruments [1] suffer from a silicon bug where Port Enabled/Disabled bit should not be used to silence an erroneous device. The bug is so that if port is disabled with PED bit, an IRQ for device removal (or attachment) will never fire. Just for the sake of completeness, the actual problem lies with SNPS USB IP and this affects all known versions up to 3.00a. A separate patch will be added to dwc3 to enabled this quirk flag if version is <= 3.00a. [1] - AM572x Silicon Errata http://www.ti.com/lit/er/sprz429j/sprz429j.pdf Section i896— USB xHCI Port Disable Feature Does Not Work Signed-off-by: Felipe Balbi Signed-off-by: Roger Quadros Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 2d154e27c142..8b906c3683c3 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -458,6 +458,12 @@ static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, return; } + if (xhci->quirks & XHCI_BROKEN_PORT_PED) { + xhci_dbg(xhci, + "Broken Port Enabled/Disabled, ignoring port disable request.\n"); + return; + } + /* Write 1 to disable the port */ writel(port_status | PORT_PE, addr); port_status = readl(addr); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 5bf9df25e2ea..b8474a2e6e5d 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1648,6 +1648,9 @@ struct xhci_hcd { #define XHCI_SSIC_PORT_UNUSED (1 << 22) #define XHCI_NO_64BIT_SUPPORT (1 << 23) #define XHCI_MISSING_CAS (1 << 24) +/* For controller with a broken Port Disable implementation */ +#define XHCI_BROKEN_PORT_PED (1 << 25) + unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */