From: Suravee Suthikulpanit Date: Wed, 26 Nov 2014 04:51:09 +0000 (+0700) Subject: arm64: amd-seattle: Adding device tree for AMD Seattle platform X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=419043609689d0aba9f727a6faf1ff406e269ecf;p=linux-beck.git arm64: amd-seattle: Adding device tree for AMD Seattle platform Initial revision of device tree for AMD Seattle Development platform. Cc: Marc Zyngier Cc: Mark Rutland Cc: Will Deacon Cc: Catalin Marinas Signed-off-by: Suravee Suthikulpanit Signed-off-by: Thomas Lendacky Signed-off-by: Joel Schopp Signed-off-by: Arnd Bergmann --- diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 9532f8d5857e..ddc01961a0da 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -142,6 +142,11 @@ source "kernel/Kconfig.freezer" menu "Platform selection" +config ARCH_SEATTLE + bool "AMD Seattle SoC Family" + help + This enables support for AMD Seattle SOC Family + config ARCH_THUNDER bool "Cavium Inc. Thunder SoC Family" help diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index e8efc8ff3d58..3b8d427c3985 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,3 +1,4 @@ +dts-dirs += amd dts-dirs += apm dts-dirs += arm dts-dirs += cavium diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile new file mode 100644 index 000000000000..cfdf701e05df --- /dev/null +++ b/arch/arm64/boot/dts/amd/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/amd/amd-overdrive.dts b/arch/arm64/boot/dts/amd/amd-overdrive.dts new file mode 100644 index 000000000000..564a3f7df71d --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-overdrive.dts @@ -0,0 +1,66 @@ +/* + * DTS file for AMD Seattle Overdrive Development Board + * + * Copyright (C) 2014 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "AMD Seattle Development Board (Overdrive)"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + linux,pci-probe-only; + }; +}; + +&ccp0 { + status = "ok"; +}; + +&gpio0 { + status = "ok"; +}; + +&gpio1 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + gpios = <&gpio0 7 0>; + interrupt-parent = <&gpio0>; + interrupts = <7 3>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&v2m0 { + arm,msi-base-spi = <64>; + arm,msi-num-spis = <256>; +}; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi new file mode 100644 index 000000000000..f623c46525a6 --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi @@ -0,0 +1,54 @@ +/* + * DTS file for AMD Seattle Clocks + * + * Copyright (C) 2014 Advanced Micro Devices, Inc. + */ + + adl3clk_100mhz: clk100mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "adl3clk_100mhz"; + }; + + ccpclk_375mhz: clk375mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <375000000>; + clock-output-names = "ccpclk_375mhz"; + }; + + sataclk_333mhz: clk333mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333000000>; + clock-output-names = "sataclk_333mhz"; + }; + + pcieclk_500mhz: clk500mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + clock-output-names = "pcieclk_500mhz"; + }; + + dmaclk_500mhz: clk500mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + clock-output-names = "dmaclk_500mhz"; + }; + + miscclk_250mhz: clk250mhz_4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "miscclk_250mhz"; + }; + + uartspiclk_100mhz: clk100mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "uartspiclk_100mhz"; + }; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi new file mode 100644 index 000000000000..0c8e7ae96fed --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi @@ -0,0 +1,172 @@ +/* + * DTS file for AMD Seattle SoC + * + * Copyright (C) 2014 Advanced Micro Devices, Inc. + */ + +/ { + compatible = "amd,seattle"; + interrupt-parent = <&gic0>; + #address-cells = <2>; + #size-cells = <2>; + + gic0: interrupt-controller@e1101000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0xe1110000 0 0x1000>, + <0x0 0xe112f000 0 0x2000>, + <0x0 0xe1140000 0 0x10000>, + <0x0 0xe1160000 0 0x10000>; + interrupts = <1 9 0xf04>; + ranges = <0 0 0 0xe1100000 0 0x100000>; + v2m0: v2m@e0080000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x00080000 0 0x1000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff04>, + <1 14 0xff04>, + <1 11 0xff04>, + <1 10 0xff04>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 7 4>, + <0 8 4>, + <0 9 4>, + <0 10 4>, + <0 11 4>, + <0 12 4>, + <0 13 4>, + <0 14 4>; + }; + + smb0: smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* DDR range is 40-bit addressing */ + dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + + /include/ "amd-seattle-clks.dtsi" + + sata0: sata@e0300000 { + compatible = "snps,dwc-ahci"; + reg = <0 0xe0300000 0 0x800>; + interrupts = <0 355 4>; + clocks = <&sataclk_333mhz>; + dma-coherent; + }; + + i2c0: i2c@e1000000 { + status = "disabled"; + compatible = "snps,designware-i2c"; + reg = <0 0xe1000000 0 0x1000>; + interrupts = <0 357 4>; + clocks = <&uartspiclk_100mhz>; + }; + + serial0: serial@e1010000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0xe1010000 0 0x1000>; + interrupts = <0 328 4>; + clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + spi0: ssp@e1020000 { + status = "disabled"; + compatible = "arm,pl022", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1020000 0 0x1000>; + spi-controller; + interrupts = <0 330 4>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + }; + + spi1: ssp@e1030000 { + status = "disabled"; + compatible = "arm,pl022", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1030000 0 0x1000>; + spi-controller; + interrupts = <0 329 4>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio0: gpio@e1040000 { + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1040000 0 0x1000>; + gpio-controller; + interrupts = <0 359 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@e1050000 { + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1050000 0 0x1000>; + gpio-controller; + interrupts = <0 358 4>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + }; + + ccp0: ccp@e0100000 { + status = "disabled"; + compatible = "amd,ccp-seattle-v1a"; + reg = <0 0xe0100000 0 0x10000>; + interrupts = <0 3 4>; + dma-coherent; + }; + + pcie0: pcie@f0000000 { + compatible = "pci-host-ecam-generic"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + bus-range = <0 0xff>; + msi-parent = <&v2m0>; + reg = <0 0xf0000000 0 0x10000000>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = + <0x1000 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>, + <0x1000 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>, + <0x1000 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>, + <0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>; + + dma-coherent; + dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + ranges = + /* I/O Memory (size=64K) */ + <0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>, + /* 32-bit MMIO (size=2G) */ + <0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>, + /* 64-bit MMIO (size= 124G) */ + <0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>; + }; + }; +};