From: Johannes Tenschert Date: Wed, 7 Dec 2011 17:25:10 +0000 (+0100) Subject: staging: bcm: led_control.c: breaking of long lines X-Git-Tag: next-20111209~13^2~12 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4219001fc97d9a0fef153ea86ee819482be84c03;p=karo-tx-linux.git staging: bcm: led_control.c: breaking of long lines Signed-off-by: Johannes Tenschert Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/bcm/led_control.c b/drivers/staging/bcm/led_control.c index 82b9110a8035..c7f488629722 100644 --- a/drivers/staging/bcm/led_control.c +++ b/drivers/staging/bcm/led_control.c @@ -23,7 +23,8 @@ BOOLEAN IsReqGpioIsLedInNVM(PMINI_ADAPTER Adapter, UINT gpios) return TRUE; } -static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULONG timeout, INT num_of_time, LedEventInfo_t currdriverstate) +static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, + ULONG timeout, INT num_of_time, LedEventInfo_t currdriverstate) { int Status = STATUS_SUCCESS; BOOLEAN bInfinite = FALSE; @@ -38,13 +39,18 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO TURN_ON_LED(GPIO_Num, uiLedIndex); /* Wait for timeout after setting on the LED */ - Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event, - currdriverstate != Adapter->DriverState || kthread_should_stop(), - msecs_to_jiffies(timeout)); + Status = wait_event_interruptible_timeout( + Adapter->LEDInfo.notify_led_event, + currdriverstate != Adapter->DriverState || + kthread_should_stop(), + msecs_to_jiffies(timeout)); if (kthread_should_stop()) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "Led thread got signal to exit..hence exiting"); + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_DISABLED; TURN_OFF_LED(GPIO_Num, uiLedIndex); Status = EVENT_SIGNALED; break; @@ -56,9 +62,11 @@ static INT LED_Blink(PMINI_ADAPTER Adapter, UINT GPIO_Num, UCHAR uiLedIndex, ULO } TURN_OFF_LED(GPIO_Num, uiLedIndex); - Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event, - currdriverstate != Adapter->DriverState || kthread_should_stop(), - msecs_to_jiffies(timeout)); + Status = wait_event_interruptible_timeout( + Adapter->LEDInfo.notify_led_event, + currdriverstate != Adapter->DriverState || + kthread_should_stop(), + msecs_to_jiffies(timeout)); if (bInfinite == FALSE) num_of_time--; } @@ -88,7 +96,8 @@ static INT ScaleRateofTransfer(ULONG rate) static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, - UCHAR uiTxLedIndex, UCHAR GPIO_Num_rx, UCHAR uiRxLedIndex, LedEventInfo_t currdriverstate) + UCHAR uiTxLedIndex, UCHAR GPIO_Num_rx, UCHAR uiRxLedIndex, + LedEventInfo_t currdriverstate) { /* Initial values of TX and RX packets */ ULONG64 Initial_num_of_packts_tx = 0, Initial_num_of_packts_rx = 0; @@ -128,11 +137,15 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, num_of_time = num_of_time_tx; if (num_of_time > 0) { /* Blink both Tx and Rx LEDs */ - if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate) + if (LED_Blink(Adapter, 1 << GPIO_Num_tx, + uiTxLedIndex, timeout, + num_of_time, currdriverstate) == EVENT_SIGNALED) return EVENT_SIGNALED; - if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout, num_of_time, currdriverstate) + if (LED_Blink(Adapter, 1 << GPIO_Num_rx, + uiRxLedIndex, timeout, + num_of_time, currdriverstate) == EVENT_SIGNALED) return EVENT_SIGNALED; @@ -140,15 +153,21 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, if (num_of_time == num_of_time_tx) { /* Blink pending rate of Rx */ - if (LED_Blink(Adapter, (1 << GPIO_Num_rx), uiRxLedIndex, timeout, - num_of_time_rx-num_of_time, currdriverstate) == EVENT_SIGNALED) + if (LED_Blink(Adapter, (1 << GPIO_Num_rx), + uiRxLedIndex, timeout, + num_of_time_rx-num_of_time, + currdriverstate) + == EVENT_SIGNALED) return EVENT_SIGNALED; num_of_time = num_of_time_rx; } else { /* Blink pending rate of Tx */ - if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, - num_of_time_tx-num_of_time, currdriverstate) == EVENT_SIGNALED) + if (LED_Blink(Adapter, 1 << GPIO_Num_tx, + uiTxLedIndex, timeout, + num_of_time_tx-num_of_time, + currdriverstate) + == EVENT_SIGNALED) return EVENT_SIGNALED; num_of_time = num_of_time_tx; @@ -156,13 +175,17 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, } else { if (num_of_time == num_of_time_tx) { /* Blink pending rate of Rx */ - if (LED_Blink(Adapter, 1 << GPIO_Num_tx, uiTxLedIndex, timeout, num_of_time, currdriverstate) + if (LED_Blink(Adapter, 1 << GPIO_Num_tx, + uiTxLedIndex, timeout, + num_of_time, currdriverstate) == EVENT_SIGNALED) return EVENT_SIGNALED; } else { /* Blink pending rate of Tx */ - if (LED_Blink(Adapter, 1 << GPIO_Num_rx, uiRxLedIndex, timeout, - num_of_time, currdriverstate) == EVENT_SIGNALED) + if (LED_Blink(Adapter, 1 << GPIO_Num_rx, + uiRxLedIndex, timeout, + num_of_time, currdriverstate) + == EVENT_SIGNALED) return EVENT_SIGNALED; } } @@ -174,13 +197,18 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, remDelay = MAX_NUM_OF_BLINKS - num_of_time; if (remDelay > 0) { timeout = 100 * remDelay; - Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event, - currdriverstate != Adapter->DriverState || kthread_should_stop(), - msecs_to_jiffies(timeout)); + Status = wait_event_interruptible_timeout( + Adapter->LEDInfo.notify_led_event, + currdriverstate != Adapter->DriverState + || kthread_should_stop(), + msecs_to_jiffies(timeout)); if (kthread_should_stop()) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, + LED_DUMP_INFO, DBG_LVL_ALL, + "Led thread got signal to exit..hence exiting"); + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_DISABLED; return EVENT_SIGNALED; } if (Status) @@ -198,16 +226,20 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, Final_num_of_packts_tx = Adapter->dev->stats.tx_packets; Final_num_of_packts_rx = Adapter->dev->stats.rx_packets; - rate_of_transfer_tx = Final_num_of_packts_tx - Initial_num_of_packts_tx; - rate_of_transfer_rx = Final_num_of_packts_rx - Initial_num_of_packts_rx; + rate_of_transfer_tx = Final_num_of_packts_tx - + Initial_num_of_packts_tx; + rate_of_transfer_rx = Final_num_of_packts_rx - + Initial_num_of_packts_rx; /* Read initial value of packets sent/received */ Initial_num_of_packts_tx = Final_num_of_packts_tx; Initial_num_of_packts_rx = Final_num_of_packts_rx; /* Scale the rate of transfer to no of blinks. */ - num_of_time_tx = ScaleRateofTransfer((ULONG)rate_of_transfer_tx); - num_of_time_rx = ScaleRateofTransfer((ULONG)rate_of_transfer_rx); + num_of_time_tx = + ScaleRateofTransfer((ULONG)rate_of_transfer_tx); + num_of_time_rx = + ScaleRateofTransfer((ULONG)rate_of_transfer_rx); } return Status; @@ -229,51 +261,67 @@ static INT LED_Proportional_Blink(PMINI_ADAPTER Adapter, UCHAR GPIO_Num_tx, * * ----------------------------------------------------------------------------- */ -static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset, USHORT usParamLen) +static INT ValidateDSDParamsChecksum(PMINI_ADAPTER Adapter, ULONG ulParamOffset, + USHORT usParamLen) { INT Status = STATUS_SUCCESS; PUCHAR puBuffer = NULL; USHORT usChksmOrg = 0; USHORT usChecksumCalculated = 0; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X", ulParamOffset, usParamLen); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X", + ulParamOffset, usParamLen); puBuffer = kmalloc(usParamLen, GFP_KERNEL); if (!puBuffer) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum Allocation failed"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "LED Thread: ValidateDSDParamsChecksum Allocation failed"); return -ENOMEM; } /* Read the DSD data from the parameter offset. */ - if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, ulParamOffset, usParamLen)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); + if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer, + ulParamOffset, usParamLen)) { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; } /* Calculate the checksum of the data read from the DSD parameter. */ usChecksumCalculated = CFG_CalculateChecksum(puBuffer, usParamLen); - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: usCheckSumCalculated = 0x%x\n", usChecksumCalculated); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "LED Thread: usCheckSumCalculated = 0x%x\n", + usChecksumCalculated); /* * End of the DSD parameter will have a TWO bytes checksum stored in it. * Read it and compare with the calculated Checksum. */ - if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, ulParamOffset+usParamLen, 2)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); + if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg, + ulParamOffset+usParamLen, 2)) { + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed"); Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; } usChksmOrg = ntohs(usChksmOrg); - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: usChksmOrg = 0x%x", usChksmOrg); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "LED Thread: usChksmOrg = 0x%x", usChksmOrg); /* * Compare the checksum calculated with the checksum read * from DSD section */ if (usChecksumCalculated ^ usChksmOrg) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: ValidateDSDParamsChecksum: Checksums don't match"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "LED Thread: ValidateDSDParamsChecksum: Checksums don't match"); Status = STATUS_IMAGE_CHECKSUM_MISMATCH; goto exit; } @@ -316,12 +364,15 @@ static INT ValidateHWParmStructure(PMINI_ADAPTER Adapter, ULONG ulHwParamOffset) if (0 == HwParamLen || HwParamLen > Adapter->uiNVMDSDSize) return STATUS_IMAGE_CHECKSUM_MISMATCH; - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread:HwParamLen = 0x%x", HwParamLen); - Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset, HwParamLen); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "LED Thread:HwParamLen = 0x%x", HwParamLen); + Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset, + HwParamLen); return Status; } /* ValidateHWParmStructure() */ -static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[]) +static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, + UCHAR GPIO_Array[]) { int Status = STATUS_SUCCESS; @@ -331,13 +382,17 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ UCHAR ucIndex = 0; UCHAR ucGPIOInfo[32] = {0}; - BeceemNVMRead(Adapter, (PUINT)&usEEPROMVersion, EEPROM_VERSION_OFFSET, 2); + BeceemNVMRead(Adapter, (PUINT)&usEEPROMVersion, + EEPROM_VERSION_OFFSET, 2); - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "usEEPROMVersion: Minor:0x%X Major:0x%x", usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF)); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "usEEPROMVersion: Minor:0x%X Major:0x%x", + usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF)); if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) { - BeceemNVMRead(Adapter, (PUINT)&usHwParamData, EEPROM_HW_PARAM_POINTER_ADDRESS, 2); + BeceemNVMRead(Adapter, (PUINT)&usHwParamData, + EEPROM_HW_PARAM_POINTER_ADDRESS, 2); usHwParamData = ntohs(usHwParamData); dwReadValue = usHwParamData; } else { @@ -352,12 +407,15 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ if (Status != STATUS_SUCCESS) return Status; - BeceemNVMRead(Adapter, (PUINT)&dwReadValue, EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4); + BeceemNVMRead(Adapter, (PUINT)&dwReadValue, + EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4); dwReadValue = ntohl(dwReadValue); } - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: Start address of HW_PARAM structure = 0x%lx", dwReadValue); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "LED Thread: Start address of HW_PARAM structure = 0x%lx", + dwReadValue); /* * Validate if the address read out is within the DSD. @@ -413,12 +471,14 @@ static int ReadLEDInformationFromEEPROM(PMINI_ADAPTER Adapter, UCHAR GPIO_Array[ } } - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "GPIO's bit map correspond to LED :0x%X", Adapter->gpioBitMap); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "GPIO's bit map correspond to LED :0x%X", Adapter->gpioBitMap); return Status; } -static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread) +static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, + BOOLEAN *bEnableThread) { int Status = STATUS_SUCCESS; /* Array to store GPIO numbers from EEPROM */ @@ -430,7 +490,8 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1); if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) { - BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Target Params not Avail.\n"); + BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, "Target Params not Avail.\n"); return -ENOENT; } @@ -449,7 +510,8 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread * CONFIG file read successfully. Deallocate the memory of * uiFileNameBufferSize */ - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: Config file read successfully\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, + "LED Thread: Config file read successfully\n"); puCFGData = (PUCHAR) &Adapter->pstargetparams->HostDrvrConfig1; /* @@ -473,9 +535,11 @@ static int ReadConfigFileStructure(PMINI_ADAPTER Adapter, BOOLEAN *bEnableThread Adapter->LEDInfo.LEDState[uiIndex].LED_Type = bData; if (bData <= NUM_OF_LEDS) - Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = GPIO_Array[bData]; + Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = + GPIO_Array[bData]; else - Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = DISABLE_GPIO_NUM; + Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num = + DISABLE_GPIO_NUM; puCFGData++; bData = *puCFGData; @@ -522,20 +586,28 @@ static VOID LedGpioInit(PMINI_ADAPTER Adapter) UINT uiIndex = 0; /* Set all LED GPIO Mode to output mode */ - if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0) - BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: RDM Failed\n"); + if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, + sizeof(uiResetValue)) < 0) + BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, "LED Thread: RDM Failed\n"); for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != + DISABLE_GPIO_NUM) uiResetValue |= (1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num); - TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num, uiIndex); + TURN_OFF_LED(1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num, + uiIndex); } - if (wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, sizeof(uiResetValue)) < 0) - BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: WRM Failed\n"); + if (wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue, + sizeof(uiResetValue)) < 0) + BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, "LED Thread: WRM Failed\n"); Adapter->LEDInfo.bIdle_led_off = FALSE; } -static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *GPIO_num_rx, UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex, LedEventInfo_t currdriverstate) +static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, + UCHAR *GPIO_num_rx, UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex, + LedEventInfo_t currdriverstate) { UINT uiIndex = 0; @@ -547,8 +619,10 @@ static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *G if ((currdriverstate == NORMAL_OPERATION) || (currdriverstate == IDLEMODE_EXIT) || (currdriverstate == FW_DOWNLOAD)) { - if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & currdriverstate) { - if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) { + if (Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State & + currdriverstate) { + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num + != DISABLE_GPIO_NUM) { if (*GPIO_num_tx == DISABLE_GPIO_NUM) { *GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num; *uiLedTxIndex = uiIndex; @@ -559,8 +633,10 @@ static INT BcmGetGPIOPinInfo(PMINI_ADAPTER Adapter, UCHAR *GPIO_num_tx, UCHAR *G } } } else { - if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State & currdriverstate) { - if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != DISABLE_GPIO_NUM) { + if (Adapter->LEDInfo.LEDState[uiIndex].LED_On_State + & currdriverstate) { + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num + != DISABLE_GPIO_NUM) { *GPIO_num_tx = Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num; *uiLedTxIndex = uiIndex; } @@ -604,12 +680,17 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) (currdriverstate != LOWPOWER_MODE_ENTER)) || (currdriverstate == LED_THREAD_INACTIVE)) - Status = wait_event_interruptible(Adapter->LEDInfo.notify_led_event, - currdriverstate != Adapter->DriverState || kthread_should_stop()); + Status = wait_event_interruptible( + Adapter->LEDInfo.notify_led_event, + currdriverstate != Adapter->DriverState + || kthread_should_stop()); if (kthread_should_stop() || Adapter->device_removed) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting"); - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "Led thread got signal to exit..hence exiting"); + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_DISABLED; TURN_OFF_LED(1 << GPIO_num, uiLedIndex); return; /* STATUS_FAILURE; */ } @@ -626,7 +707,8 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) case DRIVER_INIT: currdriverstate = DRIVER_INIT; /* Adapter->DriverState; */ - BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate); + BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, + &uiLedIndex, &dummyIndex, currdriverstate); if (GPIO_num != DISABLE_GPIO_NUM) TURN_ON_LED(1 << GPIO_num, uiLedIndex); @@ -639,16 +721,19 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) * "LED Thread: FW_DN_DONE called\n"); */ currdriverstate = FW_DOWNLOAD; - BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate); + BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, + &uiLedIndex, &dummyIndex, currdriverstate); if (GPIO_num != DISABLE_GPIO_NUM) { timeout = 50; - LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex, timeout, -1, currdriverstate); + LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex, + timeout, -1, currdriverstate); } break; case FW_DOWNLOAD_DONE: currdriverstate = FW_DOWNLOAD_DONE; - BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate); + BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, + &uiLedIndex, &dummyIndex, currdriverstate); if (GPIO_num != DISABLE_GPIO_NUM) TURN_ON_LED(1 << GPIO_num, uiLedIndex); break; @@ -660,7 +745,8 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) */ case NO_NETWORK_ENTRY: currdriverstate = NO_NETWORK_ENTRY; - BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyGPIONum, currdriverstate); + BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, + &uiLedIndex, &dummyGPIONum, currdriverstate); if (GPIO_num != DISABLE_GPIO_NUM) TURN_ON_LED(1 << GPIO_num, uiLedIndex); break; @@ -673,8 +759,12 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) currdriverstate = NORMAL_OPERATION; Adapter->LEDInfo.bIdle_led_off = FALSE; - BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiLEDTx, &uiLEDRx, currdriverstate); - if ((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM)) { + BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, + &GPIO_num_rx, &uiLEDTx, &uiLEDRx, + currdriverstate); + if ((GPIO_num_tx == DISABLE_GPIO_NUM) && + (GPIO_num_rx == + DISABLE_GPIO_NUM)) { GPIO_num = DISABLE_GPIO_NUM; } else { /* @@ -684,7 +774,8 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) if (GPIO_num_tx == DISABLE_GPIO_NUM) { GPIO_num_tx = GPIO_num_rx; uiLEDTx = uiLEDRx; - } else if (GPIO_num_rx == DISABLE_GPIO_NUM) { + } else if (GPIO_num_rx == + DISABLE_GPIO_NUM) { GPIO_num_rx = GPIO_num_tx; uiLEDRx = uiLEDTx; } @@ -692,13 +783,17 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) * Blink the LED in proportionate * to Tx and Rx transmissions. */ - LED_Proportional_Blink(Adapter, GPIO_num_tx, uiLEDTx, GPIO_num_rx, uiLEDRx, currdriverstate); + LED_Proportional_Blink(Adapter, + GPIO_num_tx, uiLEDTx, + GPIO_num_rx, uiLEDRx, + currdriverstate); } } break; case LOWPOWER_MODE_ENTER: currdriverstate = LOWPOWER_MODE_ENTER; - if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == Adapter->ulPowerSaveMode) { + if (DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING == + Adapter->ulPowerSaveMode) { /* Turn OFF all the LED */ uiResetValue = 0; for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { @@ -723,32 +818,36 @@ static VOID LEDControlThread(PMINI_ADAPTER Adapter) currdriverstate = DRIVER_HALT; GPIO_num = DISABLE_GPIO_NUM; for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != - DISABLE_GPIO_NUM) + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num + != DISABLE_GPIO_NUM) TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } /* Adapter->DriverState = DRIVER_INIT; */ break; case LED_THREAD_INACTIVE: - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "InActivating LED thread..."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, "InActivating LED thread..."); currdriverstate = LED_THREAD_INACTIVE; - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_INACTIVELY; + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_RUNNING_INACTIVELY; Adapter->LEDInfo.bLedInitDone = FALSE; /* disable ALL LED */ for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) { - if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num != - DISABLE_GPIO_NUM) + if (Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num + != DISABLE_GPIO_NUM) TURN_OFF_LED((1 << Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num), uiIndex); } break; case LED_THREAD_ACTIVE: - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Activating LED thread again..."); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, "Activating LED thread again..."); if (Adapter->LinkUpStatus == FALSE) Adapter->DriverState = NO_NETWORK_ENTRY; else Adapter->DriverState = NORMAL_OPERATION; - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY; + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_RUNNING_ACTIVELY; break; /* return; */ default: @@ -778,7 +877,9 @@ int InitLedSettings(PMINI_ADAPTER Adapter) */ Status = ReadConfigFileStructure(Adapter, &bEnableThread); if (STATUS_SUCCESS != Status) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "LED Thread: FAILED in ReadConfigFileStructure\n"); + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "LED Thread: FAILED in ReadConfigFileStructure\n"); return Status; } @@ -788,20 +889,26 @@ int InitLedSettings(PMINI_ADAPTER Adapter) } else { Adapter->DriverState = DRIVER_HALT; wake_up(&Adapter->LEDInfo.notify_led_event); - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_DISABLED; } } else if (bEnableThread) { /* Create secondary thread to handle the LEDs */ init_waitqueue_head(&Adapter->LEDInfo.notify_led_event); init_waitqueue_head(&Adapter->LEDInfo.idleModeSyncEvent); - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_RUNNING_ACTIVELY; + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_RUNNING_ACTIVELY; Adapter->LEDInfo.bIdle_led_off = FALSE; - Adapter->LEDInfo.led_cntrl_threadid = kthread_run((int (*)(void *)) - LEDControlThread, Adapter, "led_control_thread"); + Adapter->LEDInfo.led_cntrl_threadid = + kthread_run((int (*)(void *)) LEDControlThread, + Adapter, "led_control_thread"); if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) { - BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Not able to spawn Kernel Thread\n"); - Adapter->LEDInfo.led_thread_running = BCM_LED_THREAD_DISABLED; + BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, + DBG_LVL_ALL, + "Not able to spawn Kernel Thread\n"); + Adapter->LEDInfo.led_thread_running = + BCM_LED_THREAD_DISABLED; return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid); } }