From: Jacopo Mondi Date: Thu, 22 Jun 2017 10:00:58 +0000 (+0200) Subject: pinctrl: generic: Add output-enable property X-Git-Tag: v4.13-rc1~139^2~7 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=425562429d4f3b134c7390249c23a3f647aad199;p=karo-tx-linux.git pinctrl: generic: Add output-enable property Add output-enable generic pin configuration property. This properties allows enabling/disabling pin's output capabilities without actually driving any value on the line. Acked-by: Rob Herring [Added inline elaborations on buffer enabling/disabling] Signed-off-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index f01d154090da..2d4ef9f0fded 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -251,14 +251,20 @@ drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source drive-strength - sink or source at most X mA -input-enable - enable input on pin (no effect on output) -input-disable - disable input on pin (no effect on output) +input-enable - enable input on pin (no effect on output, such as + enabling an input buffer) +input-disable - disable input on pin (no effect on output, such as + disabling an input buffer) input-schmitt-enable - enable schmitt-trigger mode input-schmitt-disable - disable schmitt-trigger mode input-debounce - debounce mode with debound time X power-source - select between different power supplies low-power-enable - enable low power mode low-power-disable - disable low power mode +output-disable - disable output on a pin (such as disable an output + buffer) +output-enable - enable output on a pin without actively driving it + (such as enabling an output buffer) output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level slew-rate - set the slew rate diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 720a19fd38d2..fc0c230aa11f 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -44,6 +44,7 @@ static const struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL, false), PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL, false), PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true), + PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled", NULL, false), PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true), PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true), PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true), @@ -172,6 +173,8 @@ static const struct pinconf_generic_params dt_params[] = { { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, { "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 }, { "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 }, + { "output-disable", PIN_CONFIG_OUTPUT_ENABLE, 0 }, + { "output-enable", PIN_CONFIG_OUTPUT_ENABLE, 1 }, { "output-high", PIN_CONFIG_OUTPUT, 1, }, { "output-low", PIN_CONFIG_OUTPUT, 0, }, { "power-source", PIN_CONFIG_POWER_SOURCE, 0 }, diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 7620eb127cff..231d3075815a 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -73,10 +73,16 @@ * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. - * @PIN_CONFIG_OUTPUT: this will configure the pin as an output. Use argument - * 1 to indicate high level, argument 0 to indicate low level. (Please - * see Documentation/pinctrl.txt, section "GPIO mode pitfalls" for a - * discussion around this parameter.) + * @PIN_CONFIG_OUTPUT_ENABLE: this will enable the pin's output mode + * without driving a value there. For most platforms this reduces to + * enable the output buffers and then let the pin controller current + * configuration (eg. the currently selected mux function) drive values on + * the line. Use argument 1 to enable output mode, argument 0 to disable + * it. + * @PIN_CONFIG_OUTPUT: this will configure the pin as an output and drive a + * value on the line. Use argument 1 to indicate high level, argument 0 to + * indicate low level. (Please see Documentation/pinctrl.txt, section + * "GPIO mode pitfalls" for a discussion around this parameter.) * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. @@ -105,6 +111,7 @@ enum pin_config_param { PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_SCHMITT_ENABLE, PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_OUTPUT_ENABLE, PIN_CONFIG_OUTPUT, PIN_CONFIG_POWER_SOURCE, PIN_CONFIG_SLEW_RATE,