From: Arik Nemtsov Date: Wed, 8 Jul 2015 12:41:46 +0000 (+0300) Subject: mac80211: TDLS: deny ch-switch req on disallowed channels X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=42d8d789615d539cb13733e516b94e874a34f775;p=linux-beck.git mac80211: TDLS: deny ch-switch req on disallowed channels If a TDLS station is not allowed to beacon on a channel, don't accept a channel switch request to this channel. Move channel building code up to avoid lockdep violations - reg_can_beacon needs to take the wdev lock. Signed-off-by: Arik Nemtsov Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- diff --git a/net/mac80211/tdls.c b/net/mac80211/tdls.c index 91e86bf76867..aee701a5649e 100644 --- a/net/mac80211/tdls.c +++ b/net/mac80211/tdls.c @@ -1737,6 +1737,31 @@ ieee80211_process_tdls_channel_switch_req(struct ieee80211_sub_if_data *sdata, return -EINVAL; } + if (!elems.sec_chan_offs) { + chan_type = NL80211_CHAN_HT20; + } else { + switch (elems.sec_chan_offs->sec_chan_offs) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + chan_type = NL80211_CHAN_HT40PLUS; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + chan_type = NL80211_CHAN_HT40MINUS; + break; + default: + chan_type = NL80211_CHAN_HT20; + break; + } + } + + cfg80211_chandef_create(&chandef, chan, chan_type); + + /* we will be active on the TDLS link */ + if (!cfg80211_reg_can_beacon_relax(sdata->local->hw.wiphy, &chandef, + sdata->wdev.iftype)) { + tdls_dbg(sdata, "TDLS chan switch to forbidden channel\n"); + return -EINVAL; + } + mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, tf->sa); if (!sta || !test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH)) { @@ -1757,27 +1782,15 @@ ieee80211_process_tdls_channel_switch_req(struct ieee80211_sub_if_data *sdata, goto out; } - if (!sta->sta.ht_cap.ht_supported) { - chan_type = NL80211_CHAN_NO_HT; - } else if (!elems.sec_chan_offs) { - chan_type = NL80211_CHAN_HT20; - } else { - switch (elems.sec_chan_offs->sec_chan_offs) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - chan_type = NL80211_CHAN_HT40PLUS; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - chan_type = NL80211_CHAN_HT40MINUS; - break; - default: - chan_type = NL80211_CHAN_HT20; - break; - } + /* peer should have known better */ + if (!sta->sta.ht_cap.ht_supported && elems.sec_chan_offs && + elems.sec_chan_offs->sec_chan_offs) { + tdls_dbg(sdata, "TDLS chan switch - wide chan unsupported\n"); + ret = -ENOTSUPP; + goto out; } - cfg80211_chandef_create(&chandef, chan, chan_type); params.chandef = &chandef; - params.switch_time = le16_to_cpu(elems.ch_sw_timing->switch_time); params.switch_timeout = le16_to_cpu(elems.ch_sw_timing->switch_timeout);