From: Wey-Yi Guy Date: Mon, 14 Dec 2009 22:12:21 +0000 (-0800) Subject: iwlwifi: remove extra error msg on sensitivity calibration X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4309af2735825115a982acf4c2c868b5c5671e7f;p=linux-beck.git iwlwifi: remove extra error msg on sensitivity calibration Do not need to log error when fail the sensitivity command, driver will send sensitivity write command to uCode after each sensitivity calibration if station is associated with AP. It is a normal case when user unload the module or shutdown the system while still associated with the AP, since uCode already on the way down, it will not reply the sensitivity write request; report error in this case will give misleading information, remove the error checking here to provide a clean shutdown if no other error detected. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c index 95a57b36a7ea..dc61906290e8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-calib.c +++ b/drivers/net/wireless/iwlwifi/iwl-calib.c @@ -414,7 +414,6 @@ static int iwl_sens_auto_corr_ofdm(struct iwl_priv *priv, /* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */ static int iwl_sensitivity_write(struct iwl_priv *priv) { - int ret = 0; struct iwl_sensitivity_cmd cmd ; struct iwl_sensitivity_data *data = NULL; struct iwl_host_cmd cmd_out = { @@ -477,11 +476,7 @@ static int iwl_sensitivity_write(struct iwl_priv *priv) memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]), sizeof(u16)*HD_TABLE_SIZE); - ret = iwl_send_cmd(priv, &cmd_out); - if (ret) - IWL_ERR(priv, "SENSITIVITY_CMD failed\n"); - - return ret; + return iwl_send_cmd(priv, &cmd_out); } void iwl_init_sensitivity(struct iwl_priv *priv)