From: Daniel Walker Date: Fri, 6 Nov 2015 00:31:21 +0000 (-0800) Subject: powerpc/85xx: mpc85xx ADS: remove pci exclude X-Git-Tag: v4.5-rc1~86^2^2~8 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=433c858a61ac4192f821b71cd1370886e8395863;p=karo-tx-linux.git powerpc/85xx: mpc85xx ADS: remove pci exclude This code was reworked in commit, 905e75c46dba5f3061049277e4eb7110beedba43 This change removed the fsl_add_bridge() which originally was above the addition of the pci_exclude_device function. I think the assumption was that the pci_exclude_device would prevent changes to the bridge PCI config after it's been added. It seems it wasn't fully tested on MPC85xx ADS because if you move the fsl_add_bridge() the pci_exclude_device is set in the machine description then you can never update the PCI Config since the exclude prevents it. This disrupts things like DMA. This issue was extensively debugged by David Beazley. Cc: xe-kernel@external.cisco.com Cc: dbeazley@cisco.com Cc: dwalker@fifo99.com Signed-off-by: Daniel Walker Signed-off-by: Scott Wood --- diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 7d12a19aa7ee..de72a5f464b1 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -36,17 +36,6 @@ #include "mpc85xx.h" -#ifdef CONFIG_PCI -static int mpc85xx_exclude_device(struct pci_controller *hose, - u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} -#endif /* CONFIG_PCI */ - static void __init mpc85xx_ads_pic_init(void) { struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, @@ -145,10 +134,6 @@ static void __init mpc85xx_ads_setup_arch(void) init_ioports(); #endif -#ifdef CONFIG_PCI - ppc_md.pci_exclude_device = mpc85xx_exclude_device; -#endif - fsl_pci_assign_primary(); }