From: Mika Westerberg Date: Wed, 21 Oct 2015 10:08:44 +0000 (+0300) Subject: pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4341e8a5458f10cb7265167061fa06ebf3a3a903;p=linux-beck.git pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOs Reserved for ACPI actually means that in such case the GPIO hardware will not update the interrupt status register (GPI_IS) even if the pin is configured to trigger an interrupt. It will update GPI_GPE_STS instead and does not trigger an interrupt. Allow using such pins as GPIOs, only prevent their usage as interrupts. We also rename function intel_pad_reserved_for_acpi() to be intel_pad_acpi_mode() which reflects the actual meaning better. Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 19b73de2f238..c4274542a5a0 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -160,8 +160,7 @@ static bool intel_pad_owned_by_host(struct intel_pinctrl *pctrl, unsigned pin) return !(readl(padown) & PADOWN_MASK(padno)); } -static bool intel_pad_reserved_for_acpi(struct intel_pinctrl *pctrl, - unsigned pin) +static bool intel_pad_acpi_mode(struct intel_pinctrl *pctrl, unsigned pin) { const struct intel_community *community; unsigned padno, gpp, offset; @@ -217,7 +216,6 @@ static bool intel_pad_locked(struct intel_pinctrl *pctrl, unsigned pin) static bool intel_pad_usable(struct intel_pinctrl *pctrl, unsigned pin) { return intel_pad_owned_by_host(pctrl, pin) && - !intel_pad_reserved_for_acpi(pctrl, pin) && !intel_pad_locked(pctrl, pin); } @@ -270,7 +268,7 @@ static void intel_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, seq_printf(s, "0x%08x 0x%08x", cfg0, cfg1); locked = intel_pad_locked(pctrl, pin); - acpi = intel_pad_reserved_for_acpi(pctrl, pin); + acpi = intel_pad_acpi_mode(pctrl, pin); if (locked || acpi) { seq_puts(s, " ["); @@ -737,6 +735,16 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned type) if (!reg) return -EINVAL; + /* + * If the pin is in ACPI mode it is still usable as a GPIO but it + * cannot be used as IRQ because GPI_IS status bit will not be + * updated by the host controller hardware. + */ + if (intel_pad_acpi_mode(pctrl, pin)) { + dev_warn(pctrl->dev, "pin %u cannot be used as IRQ\n", pin); + return -EPERM; + } + spin_lock_irqsave(&pctrl->lock, flags); value = readl(reg);