From: Johannes Berg Date: Tue, 8 Dec 2015 14:04:35 +0000 (+0200) Subject: mac80211: document status.freq restrictions X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4352a4d7f6bfd0aed0276a13fa4993db35714db4;p=linux-beck.git mac80211: document status.freq restrictions It's not always necessary to set the status.freq field, for example when this would be an expensive calculation. It must be set for all management frames (as they might be reported to userspace), but for data frames it's not really required. Document this. Signed-off-by: Johannes Berg --- diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a990338a766e..bdee1cc19c7e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1108,6 +1108,8 @@ enum mac80211_rx_vht_flags { * it but can store it and pass it back to the driver for synchronisation * @band: the active band when this frame was received * @freq: frequency the radio was tuned to when receiving this frame, in MHz + * This field must be set for management frames, but isn't strictly needed + * for data (other) frames - for those it only affects radiotap reporting. * @signal: signal strength when receiving this frame, either in dBm, in dB or * unspecified depending on the hardware capabilities flags * @IEEE80211_HW_SIGNAL_*