From: Patrice Chotard Date: Wed, 10 Aug 2016 07:39:12 +0000 (+0200) Subject: gpio: stmpe: Rework registers access X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=43db289d00c66a2d21da50001510725f598bb6e7;p=linux-beck.git gpio: stmpe: Rework registers access This update allows to use registers map as following : regs[reg_index + offset] instead of regs[reg_index] + offset This makes code clearer and will facilitate the addition of STMPE1600 on which LSB and MSB registers are respectively located at addr and addr + 1. Despite for all others STMPE variant, LSB and MSB registers are respectively located in reverse order at addr + 1 and addr. For variant which have 3 registers's bank, we use LSB,CSB and MSB indexes which contains respectively LSB (or LOW), CSB (or MID) and MSB (or HIGH) register addresses (STMPE1801/STMPE24xx). For variant which have 2 registers's bank, we use LSB and CSB indexes only. In this case the CSB index contains the MSB regs address (STMPE 1601). Signed-off-by: Patrice Chotard Reviewed-by: Linus Walleij Signed-off-by: Lee Jones --- diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index 5806af549ddf..dd0aedf298fb 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -20,6 +20,8 @@ */ enum { REG_RE, REG_FE, REG_IE }; +enum { LSB, CSB, MSB }; + #define CACHE_NR_REGS 3 /* No variant has more than 24 GPIOs */ #define CACHE_NR_BANKS (24 / 8) @@ -39,7 +41,7 @@ static int stmpe_gpio_get(struct gpio_chip *chip, unsigned offset) { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; - u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB] - (offset / 8); + u8 reg = stmpe->regs[STMPE_IDX_GPMR_LSB + (offset / 8)]; u8 mask = 1 << (offset % 8); int ret; @@ -55,7 +57,7 @@ static void stmpe_gpio_set(struct gpio_chip *chip, unsigned offset, int val) struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; int which = val ? STMPE_IDX_GPSR_LSB : STMPE_IDX_GPCR_LSB; - u8 reg = stmpe->regs[which] - (offset / 8); + u8 reg = stmpe->regs[which + (offset / 8)]; u8 mask = 1 << (offset % 8); /* @@ -89,7 +91,7 @@ static int stmpe_gpio_direction_output(struct gpio_chip *chip, { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; - u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; u8 mask = 1 << (offset % 8); stmpe_gpio_set(chip, offset, val); @@ -102,7 +104,7 @@ static int stmpe_gpio_direction_input(struct gpio_chip *chip, { struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(chip); struct stmpe *stmpe = stmpe_gpio->stmpe; - u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 reg = stmpe->regs[STMPE_IDX_GPDR_LSB + (offset / 8)]; u8 mask = 1 << (offset % 8); return stmpe_set_bits(stmpe, reg, mask, 0); @@ -173,10 +175,16 @@ static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); struct stmpe *stmpe = stmpe_gpio->stmpe; int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); - static const u8 regmap[] = { - [REG_RE] = STMPE_IDX_GPRER_LSB, - [REG_FE] = STMPE_IDX_GPFER_LSB, - [REG_IE] = STMPE_IDX_IEGPIOR_LSB, + static const u8 regmap[CACHE_NR_REGS][CACHE_NR_BANKS] = { + [REG_RE][LSB] = STMPE_IDX_GPRER_LSB, + [REG_RE][CSB] = STMPE_IDX_GPRER_CSB, + [REG_RE][MSB] = STMPE_IDX_GPRER_MSB, + [REG_FE][LSB] = STMPE_IDX_GPFER_LSB, + [REG_FE][CSB] = STMPE_IDX_GPFER_CSB, + [REG_FE][MSB] = STMPE_IDX_GPFER_MSB, + [REG_IE][LSB] = STMPE_IDX_IEGPIOR_LSB, + [REG_IE][CSB] = STMPE_IDX_IEGPIOR_CSB, + [REG_IE][MSB] = STMPE_IDX_IEGPIOR_MSB, }; int i, j; @@ -194,7 +202,7 @@ static void stmpe_gpio_irq_sync_unlock(struct irq_data *d) continue; stmpe_gpio->oldregs[i][j] = new; - stmpe_reg_write(stmpe, stmpe->regs[regmap[i]] - j, new); + stmpe_reg_write(stmpe, stmpe->regs[regmap[i][j]], new); } } @@ -230,9 +238,9 @@ static void stmpe_dbg_show_one(struct seq_file *s, struct stmpe_gpio *stmpe_gpio = gpiochip_get_data(gc); struct stmpe *stmpe = stmpe_gpio->stmpe; const char *label = gpiochip_is_requested(gc, offset); - int num_banks = DIV_ROUND_UP(stmpe->num_gpios, 8); bool val = !!stmpe_gpio_get(gc, offset); - u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB] - (offset / 8); + u8 bank = offset / 8; + u8 dir_reg = stmpe->regs[STMPE_IDX_GPDR_LSB + bank]; u8 mask = 1 << (offset % 8); int ret; u8 dir; @@ -273,18 +281,16 @@ static void stmpe_dbg_show_one(struct seq_file *s, case STMPE1601: case STMPE2401: case STMPE2403: - edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_MSB] + - num_banks - 1 - (offset / 8); + edge_det_reg = stmpe->regs[STMPE_IDX_GPEDR_LSB + bank]; ret = stmpe_reg_read(stmpe, edge_det_reg); if (ret < 0) return; edge_det = !!(ret & mask); case STMPE1801: - rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB] - - (offset / 8); - fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB] - - (offset / 8); + rise_reg = stmpe->regs[STMPE_IDX_GPRER_LSB + bank]; + fall_reg = stmpe->regs[STMPE_IDX_GPFER_LSB + bank]; + ret = stmpe_reg_read(stmpe, rise_reg); if (ret < 0) return; @@ -295,8 +301,7 @@ static void stmpe_dbg_show_one(struct seq_file *s, fall = !!(ret & mask); case STMPE801: - irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB] - - (offset / 8); + irqen_reg = stmpe->regs[STMPE_IDX_IEGPIOR_LSB + bank]; break; default: @@ -378,8 +383,9 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev) */ if (stmpe->partnum != STMPE801 || stmpe->partnum != STMPE1801) { stmpe_reg_write(stmpe, statmsbreg + i, status[i]); - stmpe_reg_write(stmpe, stmpe->regs[STMPE_IDX_GPEDR_MSB] - + i, status[i]); + stmpe_reg_write(stmpe, + stmpe->regs[STMPE_IDX_GPEDR_LSB + i], + status[i]); } }