From: Ingo Molnar Date: Thu, 11 Dec 2008 19:40:18 +0000 (+0100) Subject: perf counters: update docs X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=447557ac7ce120306b4a31d6003faef39cb1bf14;p=mv-sheeva.git perf counters: update docs Impact: update docs Signed-off-by: Ingo Molnar --- diff --git a/Documentation/perf-counters.txt b/Documentation/perf-counters.txt index 19033a0bb52..fddd32189a5 100644 --- a/Documentation/perf-counters.txt +++ b/Documentation/perf-counters.txt @@ -10,8 +10,8 @@ trigger interrupts when a threshold number of events have passed - and can thus be used to profile the code that runs on that CPU. The Linux Performance Counter subsystem provides an abstraction of these -hardware capabilities. It provides per task and per CPU counters, and -it provides event capabilities on top of those. +hardware capabilities. It provides per task and per CPU counters, counter +groups, and it provides event capabilities on top of those. Performance counters are accessed via special file descriptors. There's one file descriptor per virtual counter used. @@ -19,12 +19,8 @@ There's one file descriptor per virtual counter used. The special file descriptor is opened via the perf_counter_open() system call: - int - perf_counter_open(u32 hw_event_type, - u32 hw_event_period, - u32 record_type, - pid_t pid, - int cpu); + int sys_perf_counter_open(struct perf_counter_hw_event *hw_event_uptr, + pid_t pid, int cpu, int group_fd); The syscall returns the new fd. The fd can be used via the normal VFS system calls: read() can be used to read the counter, fcntl() @@ -33,39 +29,78 @@ can be used to set the blocking mode, etc. Multiple counters can be kept open at a time, and the counters can be poll()ed. -When creating a new counter fd, 'hw_event_type' is one of: - - enum hw_event_types { - PERF_COUNT_CYCLES, - PERF_COUNT_INSTRUCTIONS, - PERF_COUNT_CACHE_REFERENCES, - PERF_COUNT_CACHE_MISSES, - PERF_COUNT_BRANCH_INSTRUCTIONS, - PERF_COUNT_BRANCH_MISSES, - }; +When creating a new counter fd, 'perf_counter_hw_event' is: + +/* + * Hardware event to monitor via a performance monitoring counter: + */ +struct perf_counter_hw_event { + s64 type; + + u64 irq_period; + u32 record_type; + + u32 disabled : 1, /* off by default */ + nmi : 1, /* NMI sampling */ + raw : 1, /* raw event type */ + __reserved_1 : 29; + + u64 __reserved_2; +}; + +/* + * Generalized performance counter event types, used by the hw_event.type + * parameter of the sys_perf_counter_open() syscall: + */ +enum hw_event_types { + /* + * Common hardware events, generalized by the kernel: + */ + PERF_COUNT_CYCLES = 0, + PERF_COUNT_INSTRUCTIONS = 1, + PERF_COUNT_CACHE_REFERENCES = 2, + PERF_COUNT_CACHE_MISSES = 3, + PERF_COUNT_BRANCH_INSTRUCTIONS = 4, + PERF_COUNT_BRANCH_MISSES = 5, + + /* + * Special "software" counters provided by the kernel, even if + * the hardware does not support performance counters. These + * counters measure various physical and sw events of the + * kernel (and allow the profiling of them as well): + */ + PERF_COUNT_CPU_CLOCK = -1, + PERF_COUNT_TASK_CLOCK = -2, + /* + * Future software events: + */ + /* PERF_COUNT_PAGE_FAULTS = -3, + PERF_COUNT_CONTEXT_SWITCHES = -4, */ +}; These are standardized types of events that work uniformly on all CPUs that implements Performance Counters support under Linux. If a CPU is not able to count branch-misses, then the system call will return -EINVAL. -[ Note: more hw_event_types are supported as well, but they are CPU - specific and are enumerated via /sys on a per CPU basis. Raw hw event - types can be passed in as negative numbers. For example, to count - "External bus cycles while bus lock signal asserted" events on Intel - Core CPUs, pass in a -0x4064 event type value. ] - -The parameter 'hw_event_period' is the number of events before waking up -a read() that is blocked on a counter fd. Zero value means a non-blocking -counter. +More hw_event_types are supported as well, but they are CPU +specific and are enumerated via /sys on a per CPU basis. Raw hw event +types can be passed in under hw_event.type if hw_event.raw is 1. +For example, to count "External bus cycles while bus lock signal asserted" +events on Intel Core CPUs, pass in a 0x4064 event type value and set +hw_event.raw to 1. 'record_type' is the type of data that a read() will provide for the counter, and it can be one of: - enum perf_record_type { - PERF_RECORD_SIMPLE, - PERF_RECORD_IRQ, - }; +/* + * IRQ-notification data record type: + */ +enum perf_counter_record_type { + PERF_RECORD_SIMPLE = 0, + PERF_RECORD_IRQ = 1, + PERF_RECORD_GROUP = 2, +}; a "simple" counter is one that counts hardware events and allows them to be read out into a u64 count value. (read() returns 8 on @@ -76,6 +111,10 @@ the IP of the interrupted context. In this case read() will return the 8-byte counter value, plus the Instruction Pointer address of the interrupted context. +The parameter 'hw_event_period' is the number of events before waking up +a read() that is blocked on a counter fd. Zero value means a non-blocking +counter. + The 'pid' parameter allows the counter to be specific to a task: pid == 0: if the pid parameter is zero, the counter is attached to the @@ -92,7 +131,7 @@ CPU: cpu >= 0: the counter is restricted to a specific CPU cpu == -1: the counter counts on all CPUs -Note: the combination of 'pid == -1' and 'cpu == -1' is not valid. +(Note: the combination of 'pid == -1' and 'cpu == -1' is not valid.) A 'pid > 0' and 'cpu == -1' counter is a per task counter that counts events of that task and 'follows' that task to whatever CPU the task @@ -102,3 +141,7 @@ their own tasks. A 'pid == -1' and 'cpu == x' counter is a per CPU counter that counts all events on CPU-x. Per CPU counters need CAP_SYS_ADMIN privilege. +Group counters are created by passing in a group_fd of another counter. +Groups are scheduled at once and can be used with PERF_RECORD_GROUP +to record multi-dimensional timestamps. +