From: Pierre Ossman Date: Fri, 4 Apr 2008 17:36:59 +0000 (+0200) Subject: sdhci: support JMicron secondary interface X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4489428ab5a49a6f443d9aa17f1d891417787d7b;p=linux-beck.git sdhci: support JMicron secondary interface JMicron chips sometimes have two interfaces to work around limitations in Microsoft's sdhci driver. This patch allows us to use either interface. Signed-off-by: Pierre Ossman --- diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index ef77ed1bd114..5dcb4958e47b 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -39,12 +39,18 @@ #define MAX_SLOTS 8 struct sdhci_pci_chip; +struct sdhci_pci_slot; struct sdhci_pci_fixes { unsigned int quirks; int (*probe)(struct sdhci_pci_chip*); + int (*probe_slot)(struct sdhci_pci_slot*); + void (*remove_slot)(struct sdhci_pci_slot*); + + int (*suspend)(struct sdhci_pci_chip*, + pm_message_t); int (*resume)(struct sdhci_pci_chip*); }; @@ -132,6 +138,38 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) { int ret; + /* + * JMicron chips can have two interfaces to the same hardware + * in order to work around limitations in Microsoft's driver. + * We need to make sure we only bind to one of them. + * + * This code assumes two things: + * + * 1. The PCI code adds subfunctions in order. + * + * 2. The MMC interface has a lower subfunction number + * than the SD interface. + */ + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_SD) { + struct pci_dev *sd_dev; + + sd_dev = NULL; + while ((sd_dev = pci_get_device(PCI_VENDOR_ID_JMICRON, + PCI_DEVICE_ID_JMICRON_JMB38X_MMC, sd_dev)) != NULL) { + if ((PCI_SLOT(chip->pdev->devfn) == + PCI_SLOT(sd_dev->devfn)) && + (chip->pdev->bus == sd_dev->bus)) + break; + } + + if (sd_dev) { + pci_dev_put(sd_dev); + dev_info(&chip->pdev->dev, "Refusing to bind to " + "secondary interface.\n"); + return -ENODEV; + } + } + /* * JMicron chips need a bit of a nudge to enable the power * output pins. @@ -145,9 +183,58 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) return 0; } +static void jmicron_enable_mmc(struct sdhci_host *host, int on) +{ + u8 scratch; + + scratch = readb(host->ioaddr + 0xC0); + + if (on) + scratch |= 0x01; + else + scratch &= ~0x01; + + writeb(scratch, host->ioaddr + 0xC0); +} + +static int jmicron_probe_slot(struct sdhci_pci_slot *slot) +{ + /* + * The secondary interface requires a bit set to get the + * interrupts. + */ + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + jmicron_enable_mmc(slot->host, 1); + + return 0; +} + +static void jmicron_remove_slot(struct sdhci_pci_slot *slot) +{ + if (slot->chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) + jmicron_enable_mmc(slot->host, 0); +} + +static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state) +{ + int i; + + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + for (i = 0;i < chip->num_slots;i++) + jmicron_enable_mmc(chip->slots[i]->host, 0); + } + + return 0; +} + static int jmicron_resume(struct sdhci_pci_chip *chip) { - int ret; + int ret, i; + + if (chip->pdev->device == PCI_DEVICE_ID_JMICRON_JMB38X_MMC) { + for (i = 0;i < chip->num_slots;i++) + jmicron_enable_mmc(chip->slots[i]->host, 1); + } ret = jmicron_pmos(chip, 1); if (ret) { @@ -165,6 +252,10 @@ static const struct sdhci_pci_fixes sdhci_jmicron = { .probe = jmicron_probe, + .probe_slot = jmicron_probe_slot, + .remove_slot = jmicron_remove_slot, + + .suspend = jmicron_suspend, .resume = jmicron_resume, }; @@ -225,6 +316,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .driver_data = (kernel_ulong_t)&sdhci_jmicron, }, + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_MMC, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_jmicron, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) }, @@ -301,6 +400,15 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state) } } + if (chip->fixes && chip->fixes->suspend) { + ret = chip->fixes->suspend(chip, state); + if (ret) { + for (i = chip->num_slots - 1;i >= 0;i--) + sdhci_resume_host(chip->slots[i]->host); + return ret; + } + } + pci_save_state(pdev); pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); pci_disable_device(pdev); @@ -418,12 +526,22 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( goto release; } + if (chip->fixes && chip->fixes->probe_slot) { + ret = chip->fixes->probe_slot(slot); + if (ret) + goto unmap; + } + ret = sdhci_add_host(host); if (ret) - goto unmap; + goto remove; return slot; +remove: + if (chip->fixes && chip->fixes->remove_slot) + chip->fixes->remove_slot(slot); + unmap: iounmap(host->ioaddr); @@ -437,7 +555,12 @@ release: static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot) { sdhci_remove_host(slot->host); + + if (slot->chip->fixes && slot->chip->fixes->remove_slot) + slot->chip->fixes->remove_slot(slot); + pci_release_region(slot->chip->pdev, slot->pci_bar); + sdhci_free_host(slot->host); } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 65953822c9cb..30153473bc37 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2188,6 +2188,7 @@ #define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 #define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 #define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 +#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382 #define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383 #define PCI_VENDOR_ID_KORENIX 0x1982