From: Jon Hunter Date: Fri, 9 Oct 2015 14:45:55 +0000 (+0100) Subject: spi: Map SPI OF client IRQ at probe time X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=44af7927316e83eb8865933f7c836dcc85f8eb74;p=linux-beck.git spi: Map SPI OF client IRQ at probe time Currently the IRQs for SPI client devices, registered via device-tree, are mapped when the client devices are registered. If the corresponding irq-chip has not been probed yet, then the probing of the client device will fail and will not be retried. Resolve this by mapping the IRQ at probe time and allow the probe to be deferred if the IRQ is not yet available. If of_irq_get() returns an error that is not -EPROBE_DEFER, then assume that the SPI client does not have an IRQ and set the IRQ number to zero (which is equivalent to irq_of_parse_and_map()). This is based on some inputs from Thierry Reding . Cc: Thierry Reding Cc: Tomeu Vizoso Signed-off-by: Jon Hunter Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 3abb3903f2ad..40c9afac047f 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -270,15 +270,24 @@ EXPORT_SYMBOL_GPL(spi_bus_type); static int spi_drv_probe(struct device *dev) { const struct spi_driver *sdrv = to_spi_driver(dev->driver); + struct spi_device *spi = to_spi_device(dev); int ret; ret = of_clk_set_defaults(dev->of_node, false); if (ret) return ret; + if (dev->of_node) { + spi->irq = of_irq_get(dev->of_node, 0); + if (spi->irq == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (spi->irq < 0) + spi->irq = 0; + } + ret = dev_pm_domain_attach(dev, true); if (ret != -EPROBE_DEFER) { - ret = sdrv->probe(to_spi_device(dev)); + ret = sdrv->probe(spi); if (ret) dev_pm_domain_detach(dev, true); } @@ -1433,9 +1442,6 @@ of_register_spi_device(struct spi_master *master, struct device_node *nc) } spi->max_speed_hz = value; - /* IRQ */ - spi->irq = irq_of_parse_and_map(nc, 0); - /* Store a pointer to the node in the device structure */ of_node_get(nc); spi->dev.of_node = nc;