From: Johan Hovold Date: Wed, 10 Dec 2014 23:52:30 +0000 (-0800) Subject: rtc: omap: fix clock-source configuration X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=44c63a570aaec3c5d5569d63b7c4a31ddd88cae0;p=linux-beck.git rtc: omap: fix clock-source configuration This series fixes a few issues with the omap rtc-driver, cleans up a bit, adds device abstraction, and finally adds support for the PMIC control feature found in some revisions of this RTC IP block. Ultimately, this allows for powering off the Beaglebone and waking it up again on RTC alarms. This patch (of 20): Make sure not to reset the clock-source configuration when enabling the 32kHz clock mux. Until the clock source can be configured through device tree we must not overwrite settings made by the bootloader (e.g. clock-source selection). Fixes: cd914bba03d8 ("drivers/rtc/rtc-omap.c: add support for enabling 32khz clock") Signed-off-by: Johan Hovold Reviewed-by: Felipe Balbi Tested-by: Felipe Balbi Cc: Alessandro Zummo Cc: Tony Lindgren Cc: Benot Cousson Cc: Lokesh Vutla Cc: Guenter Roeck Cc: Sekhar Nori Cc: Tero Kristo Cc: Keerthy J Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index 21142e6574a9..f842c216f2dd 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -431,8 +431,10 @@ static int __init omap_rtc_probe(struct platform_device *pdev) rtc_write(0, OMAP_RTC_INTERRUPTS_REG); /* enable RTC functional clock */ - if (id_entry->driver_data & OMAP_RTC_HAS_32KCLK_EN) - rtc_writel(OMAP_RTC_OSC_32KCLK_EN, OMAP_RTC_OSC_REG); + if (id_entry->driver_data & OMAP_RTC_HAS_32KCLK_EN) { + reg = rtc_read(OMAP_RTC_OSC_REG); + rtc_writel(reg | OMAP_RTC_OSC_32KCLK_EN, OMAP_RTC_OSC_REG); + } /* clear old status */ reg = rtc_read(OMAP_RTC_STATUS_REG);