From: Ulf Hansson Date: Fri, 21 Mar 2014 09:13:05 +0000 (+0100) Subject: mmc: mmci: Enforce DT for signal direction and feedback clock X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4593df29b94b31de931dc20d7da2e6c468c8d473;p=linux-beck.git mmc: mmci: Enforce DT for signal direction and feedback clock Remove the option to provide signal direction configuration and feeback clock as platform data, enforce it through DT. Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 0d3ee08662a9..c0353f84d5be 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -1287,7 +1287,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) * indicating signal direction for the signals in * the SD/MMC bus and feedback-clock usage. */ - pwr |= host->plat->sigdir; + pwr |= host->pwr_reg_add; if (ios->bus_width == MMC_BUS_WIDTH_4) pwr &= ~MCI_ST_DATA74DIREN; @@ -1386,29 +1386,26 @@ static struct mmc_host_ops mmci_ops = { .start_signal_voltage_switch = mmci_sig_volt_switch, }; -static void mmci_dt_populate_generic_pdata(struct device_node *np, - struct mmci_platform_data *pdata) +static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc) { + struct mmci_host *host = mmc_priv(mmc); + int ret = mmc_of_parse(mmc); + + if (ret) + return ret; + if (of_get_property(np, "st,sig-dir-dat0", NULL)) - pdata->sigdir |= MCI_ST_DATA0DIREN; + host->pwr_reg_add |= MCI_ST_DATA0DIREN; if (of_get_property(np, "st,sig-dir-dat2", NULL)) - pdata->sigdir |= MCI_ST_DATA2DIREN; + host->pwr_reg_add |= MCI_ST_DATA2DIREN; if (of_get_property(np, "st,sig-dir-dat31", NULL)) - pdata->sigdir |= MCI_ST_DATA31DIREN; + host->pwr_reg_add |= MCI_ST_DATA31DIREN; if (of_get_property(np, "st,sig-dir-dat74", NULL)) - pdata->sigdir |= MCI_ST_DATA74DIREN; + host->pwr_reg_add |= MCI_ST_DATA74DIREN; if (of_get_property(np, "st,sig-dir-cmd", NULL)) - pdata->sigdir |= MCI_ST_CMDDIREN; + host->pwr_reg_add |= MCI_ST_CMDDIREN; if (of_get_property(np, "st,sig-pin-fbclk", NULL)) - pdata->sigdir |= MCI_ST_FBCLKEN; -} - -static int mmci_of_parse(struct device_node *np, struct mmc_host *mmc) -{ - int ret = mmc_of_parse(mmc); - - if (ret) - return ret; + host->pwr_reg_add |= MCI_ST_FBCLKEN; if (of_get_property(np, "mmc-cap-mmc-highspeed", NULL)) mmc->caps |= MMC_CAP_MMC_HIGHSPEED; @@ -1440,9 +1437,6 @@ static int mmci_probe(struct amba_device *dev, return -ENOMEM; } - if (np) - mmci_dt_populate_generic_pdata(np, plat); - mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev); if (!mmc) return -ENOMEM; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 8fc5814f938a..347d942d740b 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -13,6 +13,16 @@ #define MCI_PWR_ON 0x03 #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) +/* + * The ST Micro version does not have ROD and reuse the voltage registers for + * direction settings. + */ +#define MCI_ST_DATA2DIREN (1 << 2) +#define MCI_ST_CMDDIREN (1 << 3) +#define MCI_ST_DATA0DIREN (1 << 4) +#define MCI_ST_DATA31DIREN (1 << 5) +#define MCI_ST_FBCLKEN (1 << 7) +#define MCI_ST_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) @@ -183,6 +193,7 @@ struct mmci_host { unsigned int mclk; unsigned int cclk; u32 pwr_reg; + u32 pwr_reg_add; u32 clk_reg; u32 datactrl_reg; u32 busy_status; diff --git a/include/linux/amba/mmci.h b/include/linux/amba/mmci.h index 32a89cf5ec45..0d3ff95b3b4c 100644 --- a/include/linux/amba/mmci.h +++ b/include/linux/amba/mmci.h @@ -6,19 +6,6 @@ #include - -/* - * These defines is places here due to access is needed from machine - * configuration files. The ST Micro version does not have ROD and - * reuse the voltage registers for direction settings. - */ -#define MCI_ST_DATA2DIREN (1 << 2) -#define MCI_ST_CMDDIREN (1 << 3) -#define MCI_ST_DATA0DIREN (1 << 4) -#define MCI_ST_DATA31DIREN (1 << 5) -#define MCI_ST_FBCLKEN (1 << 7) -#define MCI_ST_DATA74DIREN (1 << 8) - /* Just some dummy forwarding */ struct dma_chan; @@ -45,8 +32,6 @@ struct dma_chan; * @capabilities: the capabilities of the block as implemented in * this platform, signify anything MMC_CAP_* from mmc/host.h * @capabilities2: more capabilities, MMC_CAP2_* from mmc/host.h - * @sigdir: a bit field indicating for what bits in the MMC bus the host - * should enable signal direction indication. * @dma_filter: function used to select an appropriate RX and TX * DMA channel to be used for DMA, if and only if you're deploying the * generic DMA engine @@ -69,7 +54,6 @@ struct mmci_platform_data { bool cd_invert; unsigned long capabilities; unsigned long capabilities2; - u32 sigdir; bool (*dma_filter)(struct dma_chan *chan, void *filter_param); void *dma_rx_param; void *dma_tx_param;