From: Matt Ranostay Date: Tue, 27 Oct 2015 03:18:23 +0000 (-0700) Subject: iio: lidar: return -EINVAL on invalid signal X-Git-Tag: v4.4-rc5~6^2~1^2~3 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=45a6b8218df54087c3bb8dc731424d8789d31790;p=karo-tx-linux.git iio: lidar: return -EINVAL on invalid signal Returning zero from the measurment function has the side effect of corrupting the triggered buffer readings, better to use -EINVAL than a zero measurement reading. The INVALID status happens even it isn't out of range sometimes roughly once every second or two. This can be from an invalid second signal return path. Hence there are spurious zero readings from the triggered buffer, and warning messages in the kernel log. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c index 961f9f990faf..e544fcfd5ced 100644 --- a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c @@ -130,10 +130,10 @@ static int lidar_get_measurement(struct lidar_data *data, u16 *reg) if (ret < 0) break; - /* return 0 since laser is likely pointed out of range */ + /* return -EINVAL since laser is likely pointed out of range */ if (ret & LIDAR_REG_STATUS_INVALID) { *reg = 0; - ret = 0; + ret = -EINVAL; break; } @@ -197,7 +197,7 @@ static irqreturn_t lidar_trigger_handler(int irq, void *private) if (!ret) { iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, iio_get_time_ns()); - } else { + } else if (ret != -EINVAL) { dev_err(&data->client->dev, "cannot read LIDAR measurement"); }