From: Peter Chen <peter.chen@freescale.com>
Date: Fri, 6 Mar 2015 02:36:04 +0000 (+0800)
Subject: usb: chipidea: udc: apply new usb_udc_vbus_handler interface
X-Git-Tag: v4.1-rc1~154^2~55^2~10
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=467a78c;p=karo-tx-linux.git

usb: chipidea: udc: apply new usb_udc_vbus_handler interface

It can move all pullup/pulldown operation control to udc-core
through usb_gadget_connect/usb_gadget_disconnect according to
vbus status.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index ff451048c1ac..55a36e046a1e 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -86,10 +86,8 @@ static int hw_device_state(struct ci_hdrc *ci, u32 dma)
 		/* interrupt, error, port change, reset, sleep/suspend */
 		hw_write(ci, OP_USBINTR, ~0,
 			     USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
-		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	} else {
 		hw_write(ci, OP_USBINTR, ~0, 0);
-		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
 	}
 	return 0;
 }
@@ -1474,7 +1472,9 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 			hw_device_reset(ci);
 			hw_device_state(ci, ci->ep0out->qh.dma);
 			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+			usb_udc_vbus_handler(_gadget, true);
 		} else {
+			usb_udc_vbus_handler(_gadget, false);
 			if (ci->driver)
 				ci->driver->disconnect(&ci->gadget);
 			hw_device_state(ci, 0);
@@ -1540,13 +1540,12 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 
-	if (!ci->vbus_active)
-		return -EOPNOTSUPP;
-
+	pm_runtime_get_sync(&ci->gadget.dev);
 	if (is_on)
 		hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
 	else
 		hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
+	pm_runtime_put_sync(&ci->gadget.dev);
 
 	return 0;
 }
@@ -1676,6 +1675,7 @@ static int ci_udc_start(struct usb_gadget *gadget,
 		spin_lock_irqsave(&ci->lock, flags);
 		hw_device_reset(ci);
 	} else {
+		usb_udc_vbus_handler(&ci->gadget, false);
 		pm_runtime_put_sync(&ci->gadget.dev);
 		return retval;
 	}