From: Aaron Lu Date: Tue, 3 Jul 2012 09:27:49 +0000 (+0800) Subject: mmc: sdhci: fix incorrect command used in tuning X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=473b095a72a9;p=linux-beck.git mmc: sdhci: fix incorrect command used in tuning For SD hosts using retuning mode 1, when retuning timer expired, it will need to do retuning in sdhci_request before processing the actual request. But the retuning command is fixed: cmd19 for SD card and cmd21 for eMMC card, so we can't use the original request's command to do the tuning. And since the tuning command depends on the card type attached to the host, we will need to know the card type to use the correct tuning command. Signed-off-by: Aaron Lu Reviewed-by: Philip Rakity Cc: stable [3.3+] Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 101f9d43196f..12015151fab9 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -27,6 +27,7 @@ #include #include +#include #include "sdhci.h" @@ -1245,6 +1246,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) struct sdhci_host *host; bool present; unsigned long flags; + u32 tuning_opcode; host = mmc_priv(mmc); @@ -1292,8 +1294,12 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) */ if ((host->flags & SDHCI_NEEDS_RETUNING) && !(present_state & (SDHCI_DOING_WRITE | SDHCI_DOING_READ))) { + /* eMMC uses cmd21 while sd and sdio use cmd19 */ + tuning_opcode = mmc->card->type == MMC_TYPE_MMC ? + MMC_SEND_TUNING_BLOCK_HS200 : + MMC_SEND_TUNING_BLOCK; spin_unlock_irqrestore(&host->lock, flags); - sdhci_execute_tuning(mmc, mrq->cmd->opcode); + sdhci_execute_tuning(mmc, tuning_opcode); spin_lock_irqsave(&host->lock, flags); /* Restore original mmc_request structure */