From: Guenter Roeck Date: Sun, 15 Jan 2012 18:48:48 +0000 (-0800) Subject: hwmon: (w83793) Fix checkpatch issues X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=47efe8772f241c4be540355d90e38b79cc1092a4;p=linux-beck.git hwmon: (w83793) Fix checkpatch issues Fixed: ERROR: code indent should use tabs where possible ERROR: do not use assignment in if condition ERROR: space required after that ',' (ctx:VxV) WARNING: braces {} are not necessary for any arm of this statement WARNING: braces {} are not necessary for single statement blocks WARNING: simple_strtol is obsolete, use kstrtol instead WARNING: simple_strtoul is obsolete, use kstrtoul instead Modify multi-line comments to follow Documentation/CodingStyle. Also replaced " == " with " == ". Translation was done with the following coccinelle script to limit risk. @@ identifier i; constant C; @@ <... - C == i + i == C ...> Not fixed (false positive): ERROR: Macros with complex values should be enclosed in parenthesis Cc: Rudolf Marek Signed-off-by: Guenter Roeck --- diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c index 742bf1355f3d..834e49d1827b 100644 --- a/drivers/hwmon/w83793.c +++ b/drivers/hwmon/w83793.c @@ -1,34 +1,34 @@ /* - w83793.c - Linux kernel driver for hardware monitoring - Copyright (C) 2006 Winbond Electronics Corp. - Yuan Mu - Rudolf Marek - Copyright (C) 2009-2010 Sven Anders , ANDURAS AG. - Watchdog driver part - (Based partially on fschmd driver, - Copyright 2007-2008 by Hans de Goede) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation - version 2. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - 02110-1301 USA. -*/ + * w83793.c - Linux kernel driver for hardware monitoring + * Copyright (C) 2006 Winbond Electronics Corp. + * Yuan Mu + * Rudolf Marek + * Copyright (C) 2009-2010 Sven Anders , ANDURAS AG. + * Watchdog driver part + * (Based partially on fschmd driver, + * Copyright 2007-2008 by Hans de Goede) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation - version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301 USA. + */ /* - Supports following chips: - - Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA - w83793 10 12 8 6 0x7b 0x5ca3 yes no -*/ + * Supports following chips: + * + * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA + * w83793 10 12 8 6 0x7b 0x5ca3 yes no + */ #include #include @@ -78,9 +78,9 @@ MODULE_PARM_DESC(nowayout, __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); /* - Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved - as ID, Bank Select registers -*/ + * Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved + * as ID, Bank Select registers + */ #define W83793_REG_BANKSEL 0x00 #define W83793_REG_VENDORID 0x0d #define W83793_REG_CHIPID 0x0e @@ -110,8 +110,10 @@ static u16 W83793_REG_TEMP_MODE[2] = { 0x5e, 0x5f }; #define TEMP_CRIT_HYST 2 #define TEMP_WARN 3 #define TEMP_WARN_HYST 4 -/* only crit and crit_hyst affect real-time alarm status - current crit crit_hyst warn warn_hyst */ +/* + * only crit and crit_hyst affect real-time alarm status + * current crit crit_hyst warn warn_hyst + */ static u16 W83793_REG_TEMP[][5] = { {0x1c, 0x78, 0x79, 0x7a, 0x7b}, {0x1d, 0x7c, 0x7d, 0x7e, 0x7f}, @@ -218,7 +220,8 @@ struct w83793_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ unsigned long last_nonvolatile; /* In jiffies, last time we update the - nonvolatile registers */ + * nonvolatile registers + */ u8 bank; u8 vrm; @@ -233,7 +236,8 @@ struct w83793_data { s8 temp[6][5]; /* current, crit, crit_hyst,warn, warn_hyst */ u8 temp_low_bits; /* Additional resolution TD1-TD4 */ u8 temp_mode[2]; /* byte 0: Temp D1-D4 mode each has 2 bits - byte 1: Temp R1,R2 mode, each has 1 bit */ + * byte 1: Temp R1,R2 mode, each has 1 bit + */ u8 temp_critical; /* If reached all fan will be at full speed */ u8 temp_fan_map[6]; /* Temp controls which pwm fan, bit field */ @@ -268,17 +272,21 @@ struct w83793_data { int watchdog_timeout; /* watchdog timeout in minutes */ }; -/* Somewhat ugly :( global data pointer list with all devices, so that - we can find our device data as when using misc_register. There is no - other method to get to one's device data from the open file-op and - for usage in the reboot notifier callback. */ +/* + * Somewhat ugly :( global data pointer list with all devices, so that + * we can find our device data as when using misc_register. There is no + * other method to get to one's device data from the open file-op and + * for usage in the reboot notifier callback. + */ static LIST_HEAD(watchdog_data_list); /* Note this lock not only protect list access, but also data.kref access */ static DEFINE_MUTEX(watchdog_data_mutex); -/* Release our data struct when we're detached from the i2c client *and* all - references to our watchdog device are released */ +/* + * Release our data struct when we're detached from the i2c client *and* all + * references to our watchdog device are released + */ static void w83793_release_resources(struct kref *ref) { struct w83793_data *data = container_of(ref, struct w83793_data, kref); @@ -337,7 +345,14 @@ store_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83793_data *data = dev_get_drvdata(dev); - data->vrm = simple_strtoul(buf, NULL, 10); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + data->vrm = val; return count; } @@ -354,7 +369,7 @@ show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf) int bit = sensor_attr->index & 0x07; u8 val; - if (ALARM_STATUS == nr) { + if (nr == ALARM_STATUS) { val = (data->alarms[index] >> (bit)) & 1; } else { /* BEEP_ENABLE */ val = (data->beeps[index] >> (bit)) & 1; @@ -374,10 +389,14 @@ store_beep(struct device *dev, struct device_attribute *attr, int index = sensor_attr->index >> 3; int shift = sensor_attr->index & 0x07; u8 beep_bit = 1 << shift; - u8 val; + unsigned long val; + int err; - val = simple_strtoul(buf, NULL, 10); - if (val != 0 && val != 1) + err = kstrtoul(buf, 10, &val); + if (err) + return err; + + if (val > 1) return -EINVAL; mutex_lock(&data->update_lock); @@ -403,9 +422,14 @@ store_beep_enable(struct device *dev, struct device_attribute *attr, { struct i2c_client *client = to_i2c_client(dev); struct w83793_data *data = i2c_get_clientdata(client); - u8 val = simple_strtoul(buf, NULL, 10); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; - if (val != 0 && val != 1) + if (val > 1) return -EINVAL; mutex_lock(&data->update_lock); @@ -449,8 +473,12 @@ store_chassis_clear(struct device *dev, struct w83793_data *data = i2c_get_clientdata(client); unsigned long val; u8 reg; + int err; - if (kstrtoul(buf, 10, &val) || val != 0) + err = kstrtoul(buf, 10, &val); + if (err) + return err; + if (val) return -EINVAL; mutex_lock(&data->update_lock); @@ -473,11 +501,10 @@ show_fan(struct device *dev, struct device_attribute *attr, char *buf) struct w83793_data *data = w83793_update_device(dev); u16 val; - if (FAN_INPUT == nr) { + if (nr == FAN_INPUT) val = data->fan[index] & 0x0fff; - } else { + else val = data->fan_min[index] & 0x0fff; - } return sprintf(buf, "%lu\n", FAN_FROM_REG(val)); } @@ -491,7 +518,13 @@ store_fan_min(struct device *dev, struct device_attribute *attr, int index = sensor_attr->index; struct i2c_client *client = to_i2c_client(dev); struct w83793_data *data = i2c_get_clientdata(client); - u16 val = FAN_TO_REG(simple_strtoul(buf, NULL, 10)); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + val = FAN_TO_REG(val); mutex_lock(&data->update_lock); data->fan_min[index] = val; @@ -513,7 +546,7 @@ show_pwm(struct device *dev, struct device_attribute *attr, char *buf) int nr = sensor_attr->nr; int index = sensor_attr->index; - if (PWM_STOP_TIME == nr) + if (nr == PWM_STOP_TIME) val = TIME_FROM_REG(data->pwm_stop_time[index]); else val = (data->pwm[index][nr] & 0x3f) << 2; @@ -531,17 +564,21 @@ store_pwm(struct device *dev, struct device_attribute *attr, to_sensor_dev_attr_2(attr); int nr = sensor_attr->nr; int index = sensor_attr->index; - u8 val; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; mutex_lock(&data->update_lock); - if (PWM_STOP_TIME == nr) { - val = TIME_TO_REG(simple_strtoul(buf, NULL, 10)); + if (nr == PWM_STOP_TIME) { + val = TIME_TO_REG(val); data->pwm_stop_time[index] = val; w83793_write_value(client, W83793_REG_PWM_STOP_TIME(index), val); } else { - val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) - >> 2; + val = SENSORS_LIMIT(val, 0, 0xff) >> 2; data->pwm[index][nr] = w83793_read_value(client, W83793_REG_PWM(index, nr)) & 0xc0; data->pwm[index][nr] |= val; @@ -563,7 +600,7 @@ show_temp(struct device *dev, struct device_attribute *attr, char *buf) struct w83793_data *data = w83793_update_device(dev); long temp = TEMP_FROM_REG(data->temp[index][nr]); - if (TEMP_READ == nr && index < 4) { /* Only TD1-TD4 have low bits */ + if (nr == TEMP_READ && index < 4) { /* Only TD1-TD4 have low bits */ int low = ((data->temp_low_bits >> (index * 2)) & 0x03) * 250; temp += temp > 0 ? low : -low; } @@ -580,7 +617,12 @@ store_temp(struct device *dev, struct device_attribute *attr, int index = sensor_attr->index; struct i2c_client *client = to_i2c_client(dev); struct w83793_data *data = i2c_get_clientdata(client); - long tmp = simple_strtol(buf, NULL, 10); + long tmp; + int err; + + err = kstrtol(buf, 10, &tmp); + if (err) + return err; mutex_lock(&data->update_lock); data->temp[index][nr] = TEMP_TO_REG(tmp, -128, 127); @@ -591,18 +633,18 @@ store_temp(struct device *dev, struct device_attribute *attr, } /* - TD1-TD4 - each has 4 mode:(2 bits) - 0: Stop monitor - 1: Use internal temp sensor(default) - 2: Reserved - 3: Use sensor in Intel CPU and get result by PECI - - TR1-TR2 - each has 2 mode:(1 bit) - 0: Disable temp sensor monitor - 1: To enable temp sensors monitor -*/ + * TD1-TD4 + * each has 4 mode:(2 bits) + * 0: Stop monitor + * 1: Use internal temp sensor(default) + * 2: Reserved + * 3: Use sensor in Intel CPU and get result by PECI + * + * TR1-TR2 + * each has 2 mode:(1 bit) + * 0: Disable temp sensor monitor + * 1: To enable temp sensors monitor + */ /* 0 disable, 6 PECI */ static u8 TO_TEMP_MODE[] = { 0, 0, 0, 6 }; @@ -622,11 +664,10 @@ show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf) tmp = (data->temp_mode[index] >> shift) & mask; /* for the internal sensor, found out if diode or thermistor */ - if (tmp == 1) { + if (tmp == 1) tmp = index == 0 ? 3 : 4; - } else { + else tmp = TO_TEMP_MODE[tmp]; - } return sprintf(buf, "%d\n", tmp); } @@ -642,7 +683,12 @@ store_temp_mode(struct device *dev, struct device_attribute *attr, int index = sensor_attr->index; u8 mask = (index < 4) ? 0x03 : 0x01; u8 shift = (index < 4) ? (2 * index) : (index - 4); - u8 val = simple_strtoul(buf, NULL, 10); + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; /* transform the sysfs interface values into table above */ if ((val == 6) && (index < 4)) { @@ -681,15 +727,14 @@ show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf) struct w83793_data *data = w83793_update_device(dev); u32 val = 0; - if (SETUP_PWM_DEFAULT == nr) { + if (nr == SETUP_PWM_DEFAULT) val = (data->pwm_default & 0x3f) << 2; - } else if (SETUP_PWM_UPTIME == nr) { + else if (nr == SETUP_PWM_UPTIME) val = TIME_FROM_REG(data->pwm_uptime); - } else if (SETUP_PWM_DOWNTIME == nr) { + else if (nr == SETUP_PWM_DOWNTIME) val = TIME_FROM_REG(data->pwm_downtime); - } else if (SETUP_TEMP_CRITICAL == nr) { + else if (nr == SETUP_TEMP_CRITICAL) val = TEMP_FROM_REG(data->temp_critical & 0x7f); - } return sprintf(buf, "%d\n", val); } @@ -703,31 +748,34 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, int nr = sensor_attr->nr; struct i2c_client *client = to_i2c_client(dev); struct w83793_data *data = i2c_get_clientdata(client); + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; mutex_lock(&data->update_lock); - if (SETUP_PWM_DEFAULT == nr) { + if (nr == SETUP_PWM_DEFAULT) { data->pwm_default = w83793_read_value(client, W83793_REG_PWM_DEFAULT) & 0xc0; - data->pwm_default |= SENSORS_LIMIT(simple_strtoul(buf, NULL, - 10), - 0, 0xff) >> 2; + data->pwm_default |= SENSORS_LIMIT(val, 0, 0xff) >> 2; w83793_write_value(client, W83793_REG_PWM_DEFAULT, data->pwm_default); - } else if (SETUP_PWM_UPTIME == nr) { - data->pwm_uptime = TIME_TO_REG(simple_strtoul(buf, NULL, 10)); + } else if (nr == SETUP_PWM_UPTIME) { + data->pwm_uptime = TIME_TO_REG(val); data->pwm_uptime += data->pwm_uptime == 0 ? 1 : 0; w83793_write_value(client, W83793_REG_PWM_UPTIME, data->pwm_uptime); - } else if (SETUP_PWM_DOWNTIME == nr) { - data->pwm_downtime = TIME_TO_REG(simple_strtoul(buf, NULL, 10)); + } else if (nr == SETUP_PWM_DOWNTIME) { + data->pwm_downtime = TIME_TO_REG(val); data->pwm_downtime += data->pwm_downtime == 0 ? 1 : 0; w83793_write_value(client, W83793_REG_PWM_DOWNTIME, data->pwm_downtime); } else { /* SETUP_TEMP_CRITICAL */ data->temp_critical = w83793_read_value(client, W83793_REG_TEMP_CRITICAL) & 0x80; - data->temp_critical |= TEMP_TO_REG(simple_strtol(buf, NULL, 10), - 0, 0x7f); + data->temp_critical |= TEMP_TO_REG(val, 0, 0x7f); w83793_write_value(client, W83793_REG_TEMP_CRITICAL, data->temp_critical); } @@ -737,31 +785,31 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, } /* - Temp SmartFan control - TEMP_FAN_MAP - Temp channel control which pwm fan, bitfield, bit 0 indicate pwm1... - It's possible two or more temp channels control the same fan, w83793 - always prefers to pick the most critical request and applies it to - the related Fan. - It's possible one fan is not in any mapping of 6 temp channels, this - means the fan is manual mode - - TEMP_PWM_ENABLE - Each temp channel has its own SmartFan mode, and temp channel - control fans that are set by TEMP_FAN_MAP - 0: SmartFanII mode - 1: Thermal Cruise Mode - - TEMP_CRUISE - Target temperature in thermal cruise mode, w83793 will try to turn - fan speed to keep the temperature of target device around this - temperature. - - TEMP_TOLERANCE - If Temp higher or lower than target with this tolerance, w83793 - will take actions to speed up or slow down the fan to keep the - temperature within the tolerance range. -*/ + * Temp SmartFan control + * TEMP_FAN_MAP + * Temp channel control which pwm fan, bitfield, bit 0 indicate pwm1... + * It's possible two or more temp channels control the same fan, w83793 + * always prefers to pick the most critical request and applies it to + * the related Fan. + * It's possible one fan is not in any mapping of 6 temp channels, this + * means the fan is manual mode + * + * TEMP_PWM_ENABLE + * Each temp channel has its own SmartFan mode, and temp channel + * control fans that are set by TEMP_FAN_MAP + * 0: SmartFanII mode + * 1: Thermal Cruise Mode + * + * TEMP_CRUISE + * Target temperature in thermal cruise mode, w83793 will try to turn + * fan speed to keep the temperature of target device around this + * temperature. + * + * TEMP_TOLERANCE + * If Temp higher or lower than target with this tolerance, w83793 + * will take actions to speed up or slow down the fan to keep the + * temperature within the tolerance range. + */ #define TEMP_FAN_MAP 0 #define TEMP_PWM_ENABLE 1 @@ -777,12 +825,12 @@ show_sf_ctrl(struct device *dev, struct device_attribute *attr, char *buf) struct w83793_data *data = w83793_update_device(dev); u32 val; - if (TEMP_FAN_MAP == nr) { + if (nr == TEMP_FAN_MAP) { val = data->temp_fan_map[index]; - } else if (TEMP_PWM_ENABLE == nr) { + } else if (nr == TEMP_PWM_ENABLE) { /* +2 to transfrom into 2 and 3 to conform with sysfs intf */ val = ((data->pwm_enable >> index) & 0x01) + 2; - } else if (TEMP_CRUISE == nr) { + } else if (nr == TEMP_CRUISE) { val = TEMP_FROM_REG(data->temp_cruise[index] & 0x7f); } else { /* TEMP_TOLERANCE */ val = data->tolerance[index >> 1] >> ((index & 0x01) ? 4 : 0); @@ -801,16 +849,20 @@ store_sf_ctrl(struct device *dev, struct device_attribute *attr, int index = sensor_attr->index; struct i2c_client *client = to_i2c_client(dev); struct w83793_data *data = i2c_get_clientdata(client); - u32 val; + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; mutex_lock(&data->update_lock); - if (TEMP_FAN_MAP == nr) { - val = simple_strtoul(buf, NULL, 10) & 0xff; + if (nr == TEMP_FAN_MAP) { + val = SENSORS_LIMIT(val, 0, 255); w83793_write_value(client, W83793_REG_TEMP_FAN_MAP(index), val); data->temp_fan_map[index] = val; - } else if (TEMP_PWM_ENABLE == nr) { - val = simple_strtoul(buf, NULL, 10); - if (2 == val || 3 == val) { + } else if (nr == TEMP_PWM_ENABLE) { + if (val == 2 || val == 3) { data->pwm_enable = w83793_read_value(client, W83793_REG_PWM_ENABLE); if (val - 2) @@ -823,12 +875,11 @@ store_sf_ctrl(struct device *dev, struct device_attribute *attr, mutex_unlock(&data->update_lock); return -EINVAL; } - } else if (TEMP_CRUISE == nr) { + } else if (nr == TEMP_CRUISE) { data->temp_cruise[index] = w83793_read_value(client, W83793_REG_TEMP_CRUISE(index)); - val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f); data->temp_cruise[index] &= 0x80; - data->temp_cruise[index] |= val; + data->temp_cruise[index] |= TEMP_TO_REG(val, 0, 0x7f); w83793_write_value(client, W83793_REG_TEMP_CRUISE(index), data->temp_cruise[index]); @@ -838,9 +889,8 @@ store_sf_ctrl(struct device *dev, struct device_attribute *attr, data->tolerance[i] = w83793_read_value(client, W83793_REG_TEMP_TOL(i)); - val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x0f); data->tolerance[i] &= ~(0x0f << shift); - data->tolerance[i] |= val << shift; + data->tolerance[i] |= TEMP_TO_REG(val, 0, 0x0f) << shift; w83793_write_value(client, W83793_REG_TEMP_TOL(i), data->tolerance[i]); } @@ -871,7 +921,13 @@ store_sf2_pwm(struct device *dev, struct device_attribute *attr, to_sensor_dev_attr_2(attr); int nr = sensor_attr->nr; int index = sensor_attr->index; - u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) >> 2; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + val = SENSORS_LIMIT(val, 0, 0xff) >> 2; mutex_lock(&data->update_lock); data->sf2_pwm[index][nr] = @@ -906,7 +962,13 @@ store_sf2_temp(struct device *dev, struct device_attribute *attr, to_sensor_dev_attr_2(attr); int nr = sensor_attr->nr; int index = sensor_attr->index; - u8 val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f); + long val; + int err; + + err = kstrtol(buf, 10, &val); + if (err) + return err; + val = TEMP_TO_REG(val, 0, 0x7f); mutex_lock(&data->update_lock); data->sf2_temp[index][nr] = @@ -948,17 +1010,19 @@ store_in(struct device *dev, struct device_attribute *attr, int index = sensor_attr->index; struct i2c_client *client = to_i2c_client(dev); struct w83793_data *data = i2c_get_clientdata(client); - u32 val; + unsigned long val; + int err; + + err = kstrtoul(buf, 10, &val); + if (err) + return err; + val = (val + scale_in[index] / 2) / scale_in[index]; - val = - (simple_strtoul(buf, NULL, 10) + - scale_in[index] / 2) / scale_in[index]; mutex_lock(&data->update_lock); if (index > 2) { /* fix the limit values of 5VDD and 5VSB to ALARM mechanism */ - if (1 == nr || 2 == nr) { + if (nr == 1 || nr == 2) val -= scale_in_add[index] / scale_in[index]; - } val = SENSORS_LIMIT(val, 0, 255); } else { val = SENSORS_LIMIT(val, 0, 0x3FF); @@ -1143,9 +1207,8 @@ static struct sensor_device_attribute_2 sda_single_files[] = { static void w83793_init_client(struct i2c_client *client) { - if (reset) { + if (reset) w83793_write_value(client, W83793_REG_CONFIG, 0x80); - } /* Start monitoring */ w83793_write_value(client, W83793_REG_CONFIG, @@ -1259,10 +1322,12 @@ static int watchdog_open(struct inode *inode, struct file *filp) struct w83793_data *pos, *data = NULL; int watchdog_is_open; - /* We get called from drivers/char/misc.c with misc_mtx hold, and we - call misc_register() from w83793_probe() with watchdog_data_mutex - hold, as misc_register() takes the misc_mtx lock, this is a possible - deadlock, so we use mutex_trylock here. */ + /* + * We get called from drivers/char/misc.c with misc_mtx hold, and we + * call misc_register() from w83793_probe() with watchdog_data_mutex + * hold, as misc_register() takes the misc_mtx lock, this is a possible + * deadlock, so we use mutex_trylock here. + */ if (!mutex_trylock(&watchdog_data_mutex)) return -ERESTARTSYS; list_for_each_entry(pos, &watchdog_data_list, list) { @@ -1275,8 +1340,10 @@ static int watchdog_open(struct inode *inode, struct file *filp) /* Check, if device is already open */ watchdog_is_open = test_and_set_bit(0, &data->watchdog_is_open); - /* Increase data reference counter (if not already done). - Note we can never not have found data, so we don't check for this */ + /* + * Increase data reference counter (if not already done). + * Note we can never not have found data, so we don't check for this + */ if (!watchdog_is_open) kref_get(&data->kref); @@ -1556,9 +1623,8 @@ w83793_detect_subclients(struct i2c_client *client) } tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR); - if (!(tmp & 0x08)) { + if (!(tmp & 0x08)) data->lm75[0] = i2c_new_dummy(adapter, 0x48 + (tmp & 0x7)); - } if (!(tmp & 0x80)) { if ((data->lm75[0] != NULL) && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) { @@ -1591,9 +1657,8 @@ static int w83793_detect(struct i2c_client *client, struct i2c_adapter *adapter = client->adapter; unsigned short address = client->addr; - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; - } bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL); @@ -1604,8 +1669,10 @@ static int w83793_detect(struct i2c_client *client, return -ENODEV; } - /* If Winbond chip, address of chip and W83793_REG_I2C_ADDR - should match */ + /* + * If Winbond chip, address of chip and W83793_REG_I2C_ADDR + * should match + */ if ((bank & 0x07) == 0 && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) != (address << 1)) { @@ -1647,9 +1714,11 @@ static int w83793_probe(struct i2c_client *client, INIT_LIST_HEAD(&data->list); kref_init(&data->kref); - /* Store client pointer in our data struct for watchdog usage - (where the client is found through a data ptr instead of the - otherway around) */ + /* + * Store client pointer in our data struct for watchdog usage + * (where the client is found through a data ptr instead of the + * otherway around) + */ data->client = client; err = w83793_detect_subclients(client); @@ -1660,8 +1729,8 @@ static int w83793_probe(struct i2c_client *client, w83793_init_client(client); /* - Only fan 1-5 has their own input pins, - Pwm 1-3 has their own pins + * Only fan 1-5 has their own input pins, + * Pwm 1-3 has their own pins */ data->has_fan = 0x1f; data->has_pwm = 0x07; @@ -1723,7 +1792,7 @@ static int w83793_probe(struct i2c_client *client, } /* check the temp1-6 mode, ignore former AMDSI selected inputs */ - tmp = w83793_read_value(client,W83793_REG_TEMP_MODE[0]); + tmp = w83793_read_value(client, W83793_REG_TEMP_MODE[0]); if (tmp & 0x01) data->has_temp |= 0x01; if (tmp & 0x04) @@ -1733,7 +1802,7 @@ static int w83793_probe(struct i2c_client *client, if (tmp & 0x40) data->has_temp |= 0x08; - tmp = w83793_read_value(client,W83793_REG_TEMP_MODE[1]); + tmp = w83793_read_value(client, W83793_REG_TEMP_MODE[1]); if (tmp & 0x01) data->has_temp |= 0x10; if (tmp & 0x02) @@ -1823,9 +1892,11 @@ static int w83793_probe(struct i2c_client *client, goto exit_devunreg; } - /* Enable Watchdog registers. - Set Configuration Register to Enable Watch Dog Registers - (Bit 2) = XXXX, X1XX. */ + /* + * Enable Watchdog registers. + * Set Configuration Register to Enable Watch Dog Registers + * (Bit 2) = XXXX, X1XX. + */ tmp = w83793_read_value(client, W83793_REG_CONFIG); w83793_write_value(client, W83793_REG_CONFIG, tmp | 0x04); @@ -1839,9 +1910,11 @@ static int w83793_probe(struct i2c_client *client, /* Disable Soft Watchdog during initialiation */ watchdog_disable(data); - /* We take the data_mutex lock early so that watchdog_open() cannot - run when misc_register() has completed, but we've not yet added - our data to the watchdog_data_list (and set the default timeout) */ + /* + * We take the data_mutex lock early so that watchdog_open() cannot + * run when misc_register() has completed, but we've not yet added + * our data to the watchdog_data_list (and set the default timeout) + */ mutex_lock(&watchdog_data_mutex); for (i = 0; i < ARRAY_SIZE(watchdog_minors); i++) { /* Register our watchdog part */ @@ -1921,9 +1994,9 @@ static void w83793_update_nonvolatile(struct device *dev) struct w83793_data *data = i2c_get_clientdata(client); int i, j; /* - They are somewhat "stable" registers, and to update them every time - takes so much time, it's just not worthy. Update them in a long - interval to avoid exception. + * They are somewhat "stable" registers, and to update them every time + * takes so much time, it's just not worthy. Update them in a long + * interval to avoid exception. */ if (!(time_after(jiffies, data->last_nonvolatile + HZ * 300) || !data->valid)) @@ -1940,9 +2013,8 @@ static void w83793_update_nonvolatile(struct device *dev) for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) { /* Update the Fan measured value and limits */ - if (!(data->has_fan & (1 << i))) { + if (!(data->has_fan & (1 << i))) continue; - } data->fan_min[i] = w83793_read_value(client, W83793_REG_FAN_MIN(i)) << 8; data->fan_min[i] |= @@ -1997,9 +2069,8 @@ static void w83793_update_nonvolatile(struct device *dev) w83793_read_value(client, W83793_REG_TEMP_CRITICAL); data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP); - for (i = 0; i < ARRAY_SIZE(data->beeps); i++) { + for (i = 0; i < ARRAY_SIZE(data->beeps); i++) data->beeps[i] = w83793_read_value(client, W83793_REG_BEEP(i)); - } data->last_nonvolatile = jiffies; } @@ -2025,9 +2096,8 @@ static struct w83793_data *w83793_update_device(struct device *dev) w83793_read_value(client, W83793_REG_IN_LOW_BITS[IN_READ]); for (i = 0; i < ARRAY_SIZE(data->fan); i++) { - if (!(data->has_fan & (1 << i))) { + if (!(data->has_fan & (1 << i))) continue; - } data->fan[i] = w83793_read_value(client, W83793_REG_FAN(i)) << 8; data->fan[i] |= @@ -2067,8 +2137,10 @@ END: return data; } -/* Ignore the possibility that somebody change bank outside the driver - Must be called with data->update_lock held, except during initialization */ +/* + * Ignore the possibility that somebody change bank outside the driver + * Must be called with data->update_lock held, except during initialization + */ static u8 w83793_read_value(struct i2c_client *client, u16 reg) { struct w83793_data *data = i2c_get_clientdata(client); @@ -2103,16 +2175,16 @@ static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value) new_bank |= data->bank & 0xfc; if (data->bank != new_bank) { - if ((res = i2c_smbus_write_byte_data - (client, W83793_REG_BANKSEL, new_bank)) >= 0) - data->bank = new_bank; - else { + res = i2c_smbus_write_byte_data(client, W83793_REG_BANKSEL, + new_bank); + if (res < 0) { dev_err(&client->dev, "set bank to %d failed, fall back " "to bank %d, write reg 0x%x error\n", new_bank, data->bank, reg); goto END; } + data->bank = new_bank; } res = i2c_smbus_write_byte_data(client, reg & 0xff, value);