From: Alexander Usyskin Date: Thu, 2 Feb 2017 09:26:54 +0000 (+0200) Subject: mei: me: generate an interrupt if the hw indicates reset. X-Git-Tag: v4.11-rc1~118^2~50 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=47f60a017169d1d3c6cb086ece272f272f110845;p=karo-tx-linux.git mei: me: generate an interrupt if the hw indicates reset. In rare case the driver may lose connection with the device after device reset due to a missed interrupt. The driver will unlock the flow by generating an interrupt towards the firmware (HIG) when the device is in the resetting state. The FW is able to ignore the interrupt during orderly flow. The effected platforms are skylake and newer. Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 23294b845c42..71216affcab1 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -393,6 +393,19 @@ static bool mei_me_hw_is_ready(struct mei_device *dev) return (mecsr & ME_RDY_HRA) == ME_RDY_HRA; } +/** + * mei_me_hw_is_resetting - check whether the me(hw) is in reset + * + * @dev: mei device + * Return: bool + */ +static bool mei_me_hw_is_resetting(struct mei_device *dev) +{ + u32 mecsr = mei_me_mecsr_read(dev); + + return (mecsr & ME_RST_HRA) == ME_RST_HRA; +} + /** * mei_me_hw_ready_wait - wait until the me(hw) has turned ready * or timeout is reached @@ -1219,6 +1232,9 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) goto end; } + if (mei_me_hw_is_resetting(dev)) + mei_hcsr_set_hig(dev); + mei_me_pg_intr(dev, me_intr_src(hcsr)); /* check if we need to start the dev */