From: David Brownell Date: Fri, 11 Aug 2006 20:53:08 +0000 (+0200) Subject: [PATCH] i2c: tps65010 build fixes X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4801bc25f37a969ea773c24d12fd4738541848a1;p=linux-beck.git [PATCH] i2c: tps65010 build fixes The tps65010.c driver in the main tree never got updated with build fixes since the last batch of I2C driver changes; and the genirq trigger flags were updated wierdly too. This also includes a minor tweak to reduce the frequency used to poll for unplug-the-AC-power on the TPS chips that don't provide relevant IRQs. It _would_ be nice to sense whether there's even a battery, but that'd normally be an HDQ/1-wire interface to a smart battery, and such APIs aren't standardized. Signed-off-by: David Brownell Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index e7e27049fbfa..0be6fd6a267d 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -43,13 +43,12 @@ /*-------------------------------------------------------------------------*/ #define DRIVER_VERSION "2 May 2005" -#define DRIVER_NAME (tps65010_driver.name) +#define DRIVER_NAME (tps65010_driver.driver.name) MODULE_DESCRIPTION("TPS6501x Power Management Driver"); MODULE_LICENSE("GPL"); static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END }; -static unsigned short normal_i2c_range[] = { I2C_CLIENT_END }; I2C_CLIENT_INSMOD; @@ -100,7 +99,7 @@ struct tps65010 { /* not currently tracking GPIO state */ }; -#define POWER_POLL_DELAY msecs_to_jiffies(800) +#define POWER_POLL_DELAY msecs_to_jiffies(5000) /*-------------------------------------------------------------------------*/ @@ -520,8 +519,11 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) goto fail1; } + /* the IRQ is active low, but many gpio lines can't support that + * so this driver can use falling-edge triggers instead. + */ + irqflags = IRQF_SAMPLE_RANDOM; #ifdef CONFIG_ARM - irqflags = IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_LOW; if (machine_is_omap_h2()) { tps->model = TPS65010; omap_cfg_reg(W4_GPIO58); @@ -543,8 +545,6 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind) // FIXME set up this board's IRQ ... } -#else - irqflags = IRQF_SAMPLE_RANDOM; #endif if (tps->irq > 0) {