From: Sonika Jindal Date: Fri, 22 Aug 2014 08:36:04 +0000 (+0530) Subject: drm/i915: Add 180 degree primary plane rotation support X-Git-Tag: v3.18-rc1~44^2~32^2~111 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=48404c1e53d4e15d7e3e77cd2c8f3f22973ef38e;p=karo-tx-linux.git drm/i915: Add 180 degree primary plane rotation support Primary planes support 180 degree rotation. Expose the feature through rotation drm property. v2: Calculating linear/tiled offsets based on pipe source width and height. Added 180 degree rotation support in ironlake_update_plane. v3: Checking if CRTC is active before issueing update_plane. Added wait for vblank to make sure we dont overtake page flips. Disabling FBC since it does not work with rotated planes. v4: Updated rotation checks for pending flips, fbc disable. Creating rotation property only for Gen4 onwards. Property resetting as part of lastclose. v5: Resetting property in i915_driver_lastclose properly for planes and crtcs. Fixed linear offset calculation that was off by 1 w.r.t width in i9xx_update_plane and ironlake_update_plane. Removed tab based indentation and unnecessary braces in intel_crtc_set_property and intel_update_fbc. FBC and flip related checks should be done only for valid crtcs. v6: Minor nits in FBC disable checks for comments in intel_crtc_set_property and positioning the disable code in intel_update_fbc. v7: In case rotation property on inactive crtc is updated, we return successfully printing debug log as crtc is inactive and only property change is preserved. v8: update_plane is changed to update_primary_plane, crtc->fb is changed to crtc->primary->fb and return value of update_primary_plane is ignored. v9: added rotation property to primary plane instead of crtc. Removing reset of rotation property from lastclose. rotation_property is moved to drm_mode_config, so drm layer will take care of resetting. Adding updation of fbc when rotation is set to 0. Allowing rotation only if value is different than old one. v10: Calling intel_primary_plane_setplane instead of update_primary_plane in set_property(Daniel). v11: Using same set_property function for both primary and sprite, Adding primary plane specific code in the same function (Matt). v12: Removing disabling/ enabling of fbc from set_property because it is done from intel_pipe_set_base. Other formatting v13: we need to call disable_fbc before changing the rotation to 180, disable_fbc from intel_pipe_set_base gets called very late, that will be used to re-enable fbc if rotation is set to 0 (Ville). Testcase: igt/kms_rotation_crc Signed-off-by: Uma Shankar Signed-off-by: Sagar Kamble Signed-off-by: Sonika Jindal [danvet: Add FIXME to explain why we need the open-coded update_fbc hunk to disable fbc when rotated 180 degree. And make checkpatch happier.] Acked-by: Matt Roper Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 203062e93452..142ac523f970 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4214,6 +4214,7 @@ enum punit_power_well { #define DISPPLANE_NO_LINE_DOUBLE 0 #define DISPPLANE_STEREO_POLARITY_FIRST 0 #define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +#define DISPPLANE_ROTATE_180 (1<<15) #define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* Ironlake */ #define DISPPLANE_TILED (1<<10) #define _DSPAADDR 0x70184 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index f072b75d606e..ae218e083dc7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2378,6 +2378,9 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc, unsigned long linear_offset; u32 dspcntr; u32 reg = DSPCNTR(plane); + int pixel_size; + + pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); if (!intel_crtc->primary_enabled) { I915_WRITE(reg, 0); @@ -2444,8 +2447,6 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc, if (IS_G4X(dev)) dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; - I915_WRITE(reg, dspcntr); - linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); if (INTEL_INFO(dev)->gen >= 4) { @@ -2458,6 +2459,21 @@ static void i9xx_update_primary_plane(struct drm_crtc *crtc, intel_crtc->dspaddr_offset = linear_offset; } + if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) { + dspcntr |= DISPPLANE_ROTATE_180; + + x += (intel_crtc->config.pipe_src_w - 1); + y += (intel_crtc->config.pipe_src_h - 1); + + /* Finding the last pixel of the last line of the display + data and adding to linear_offset*/ + linear_offset += + (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] + + (intel_crtc->config.pipe_src_w - 1) * pixel_size; + } + + I915_WRITE(reg, dspcntr); + DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", i915_gem_obj_ggtt_offset(obj), linear_offset, x, y, fb->pitches[0]); @@ -2484,6 +2500,9 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc, unsigned long linear_offset; u32 dspcntr; u32 reg = DSPCNTR(plane); + int pixel_size; + + pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); if (!intel_crtc->primary_enabled) { I915_WRITE(reg, 0); @@ -2532,14 +2551,28 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc, if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; - I915_WRITE(reg, dspcntr); - linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); intel_crtc->dspaddr_offset = intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode, fb->bits_per_pixel / 8, fb->pitches[0]); linear_offset -= intel_crtc->dspaddr_offset; + if (to_intel_plane(crtc->primary)->rotation == BIT(DRM_ROTATE_180)) { + dspcntr |= DISPPLANE_ROTATE_180; + + if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) { + x += (intel_crtc->config.pipe_src_w - 1); + y += (intel_crtc->config.pipe_src_h - 1); + + /* Finding the last pixel of the last line of the display + data and adding to linear_offset*/ + linear_offset += + (intel_crtc->config.pipe_src_h - 1) * fb->pitches[0] + + (intel_crtc->config.pipe_src_w - 1) * pixel_size; + } + } + + I915_WRITE(reg, dspcntr); DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", i915_gem_obj_ggtt_offset(obj), linear_offset, x, y, @@ -11562,6 +11595,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc, uint32_t src_w, uint32_t src_h) { struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_i915_gem_object *obj = intel_fb_obj(fb); struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb); @@ -11674,6 +11708,24 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc, mutex_unlock(&dev->struct_mutex); } else { + if (intel_crtc && intel_crtc->active && + intel_crtc->primary_enabled) { + /* + * FBC does not work on some platforms for rotated + * planes, so disable it when rotation is not 0 and + * update it when rotation is set back to 0. + * + * FIXME: This is redundant with the fbc update done in + * the primary plane enable function except that that + * one is done too late. We eventually need to unify + * this. + */ + if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) && + dev_priv->fbc.plane == intel_crtc->plane && + intel_plane->rotation != BIT(DRM_ROTATE_0)) { + intel_disable_fbc(dev); + } + } ret = intel_pipe_set_base(crtc, src.x1, src.y1, fb); if (ret) return ret; @@ -11707,6 +11759,7 @@ static const struct drm_plane_funcs intel_primary_plane_funcs = { .update_plane = intel_primary_plane_setplane, .disable_plane = intel_primary_plane_disable, .destroy = intel_plane_destroy, + .set_property = intel_plane_set_property }; static struct drm_plane *intel_primary_plane_create(struct drm_device *dev, @@ -11724,6 +11777,7 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev, primary->max_downscale = 1; primary->pipe = pipe; primary->plane = pipe; + primary->rotation = BIT(DRM_ROTATE_0); if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) primary->plane = !pipe; @@ -11739,6 +11793,19 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev, &intel_primary_plane_funcs, intel_primary_formats, num_formats, DRM_PLANE_TYPE_PRIMARY); + + if (INTEL_INFO(dev)->gen >= 4) { + if (!dev->mode_config.rotation_property) + dev->mode_config.rotation_property = + drm_mode_create_rotation_property(dev, + BIT(DRM_ROTATE_0) | + BIT(DRM_ROTATE_180)); + if (dev->mode_config.rotation_property) + drm_object_attach_property(&primary->base.base, + dev->mode_config.rotation_property, + primary->rotation); + } + return &primary->base; } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index d683a2090249..2466b2bc9099 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1093,6 +1093,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob); int intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane); void intel_flush_primary_plane(struct drm_i915_private *dev_priv, enum plane plane); +int intel_plane_set_property(struct drm_plane *plane, + struct drm_property *prop, + uint64_t val); int intel_plane_restore(struct drm_plane *plane); void intel_plane_disable(struct drm_plane *plane); int intel_sprite_set_colorkey(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index c8f744c418f0..1ab3e117644e 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -581,6 +581,12 @@ void intel_update_fbc(struct drm_device *dev) DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n"); goto out_disable; } + if (INTEL_INFO(dev)->gen <= 4 && !IS_G4X(dev) && + to_intel_plane(crtc->primary)->rotation != BIT(DRM_ROTATE_0)) { + if (set_no_fbc_reason(dev_priv, FBC_UNSUPPORTED_MODE)) + DRM_DEBUG_KMS("Rotation unsupported, disabling\n"); + goto out_disable; + } /* If the kernel debugger is active, always disable compression */ if (in_dbg_master()) diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 0bdb00b7c59c..fd5f27182a0d 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -1218,9 +1218,9 @@ out_unlock: return ret; } -static int intel_plane_set_property(struct drm_plane *plane, - struct drm_property *prop, - uint64_t val) +int intel_plane_set_property(struct drm_plane *plane, + struct drm_property *prop, + uint64_t val) { struct drm_device *dev = plane->dev; struct intel_plane *intel_plane = to_intel_plane(plane); @@ -1249,7 +1249,7 @@ int intel_plane_restore(struct drm_plane *plane) if (!plane->crtc || !plane->fb) return 0; - return intel_update_plane(plane, plane->crtc, plane->fb, + return plane->funcs->update_plane(plane, plane->crtc, plane->fb, intel_plane->crtc_x, intel_plane->crtc_y, intel_plane->crtc_w, intel_plane->crtc_h, intel_plane->src_x, intel_plane->src_y,