From: Oliver Endriss <o.endriss@gmx.de>
Date: Mon, 10 Jan 2011 09:36:24 +0000 (-0300)
Subject: [media] stv090x: 22kHz workaround must also be performed for the 2nd frontend
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4862d6b2e23f0573ef60c784341e05e1ac0804eb;p=mv-sheeva.git

[media] stv090x: 22kHz workaround must also be performed for the 2nd frontend

22kHz workaround must also be performed for the 2nd frontend.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---

diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index e3442a14e5b..d3362d0407e 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -4696,10 +4696,6 @@ static int stv090x_setup(struct dvb_frontend *fe)
 	if (stv090x_write_reg(state, STV090x_TSTRES0, 0x00) < 0)
 		goto err;
 
-	/* workaround for stuck DiSEqC output */
-	if (config->diseqc_envelope_mode)
-		stv090x_send_diseqc_burst(fe, SEC_MINI_A);
-
 	return 0;
 err:
 	dprintk(FE_ERROR, 1, "I/O error");
@@ -4784,11 +4780,6 @@ struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
 		state->internal = temp_int->internal;
 		state->internal->num_used++;
 		dprintk(FE_INFO, 1, "Found Internal Structure!");
-		dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x",
-			state->device == STV0900 ? "STV0900" : "STV0903",
-			demod,
-			state->internal->dev_ver);
-		return &state->frontend;
 	} else {
 		state->internal = kmalloc(sizeof(struct stv090x_internal),
 					  GFP_KERNEL);
@@ -4799,15 +4790,20 @@ struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
 		state->internal->i2c_adap = state->i2c;
 		state->internal->i2c_addr = state->config->address;
 		dprintk(FE_INFO, 1, "Create New Internal Structure!");
-	}
 
-	mutex_init(&state->internal->demod_lock);
-	mutex_init(&state->internal->tuner_lock);
+		mutex_init(&state->internal->demod_lock);
+		mutex_init(&state->internal->tuner_lock);
 
-	if (stv090x_setup(&state->frontend) < 0) {
-		dprintk(FE_ERROR, 1, "Error setting up device");
-		goto error;
+		if (stv090x_setup(&state->frontend) < 0) {
+			dprintk(FE_ERROR, 1, "Error setting up device");
+			goto error;
+		}
 	}
+
+	/* workaround for stuck DiSEqC output */
+	if (config->diseqc_envelope_mode)
+		stv090x_send_diseqc_burst(&state->frontend, SEC_MINI_A);
+
 	dprintk(FE_ERROR, 1, "Attaching %s demodulator(%d) Cut=0x%02x",
 	       state->device == STV0900 ? "STV0900" : "STV0903",
 	       demod,