From: Gregory Greenman Date: Sun, 3 Apr 2016 11:06:12 +0000 (+0300) Subject: iwlwifi: consider VHT 160MHz while parsing NVM X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4896d7642fd34251ba7119bcb8304d9a73e51bf8;p=linux-beck.git iwlwifi: consider VHT 160MHz while parsing NVM Devices belonging to 9000 family can support VHT 160MHz channel width, so need to consider it when configuring VHT capabilities. However, NVM file doesn't have a single bit specifying that 160MHz is supported. This patch turns on 160MHz support in VHT capabilities in case there's at least one channel supporting 160MHz. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho --- diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h index 53f39a34eca2..1f4e50289c14 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-eeprom-parse.h @@ -98,6 +98,7 @@ struct iwl_nvm_data { s8 max_tx_pwr_half_dbm; bool lar_enabled; + bool vht160_supported; struct ieee80211_supported_band bands[NUM_NL80211_BANDS]; struct ieee80211_channel channels[]; }; diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index 14743c37d976..b13f409c42ef 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -288,6 +288,9 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, !data->sku_cap_band_52GHz_enable) continue; + if (ch_flags & NVM_CHANNEL_160MHZ) + data->vht160_supported = true; + if (!lar_supported && !(ch_flags & NVM_CHANNEL_VALID)) { /* * Channels might become valid later if lar is @@ -331,17 +334,20 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, channel->flags = 0; IWL_DEBUG_EEPROM(dev, - "Ch. %d [%sGHz] %s%s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", + "Ch. %d [%sGHz] flags 0x%x %s%s%s%s%s%s%s%s%s%s(%ddBm): Ad-Hoc %ssupported\n", channel->hw_value, is_5ghz ? "5.2" : "2.4", + ch_flags, CHECK_AND_PRINT_I(VALID), CHECK_AND_PRINT_I(IBSS), CHECK_AND_PRINT_I(ACTIVE), CHECK_AND_PRINT_I(RADAR), - CHECK_AND_PRINT_I(WIDE), CHECK_AND_PRINT_I(INDOOR_ONLY), CHECK_AND_PRINT_I(GO_CONCURRENT), - ch_flags, + CHECK_AND_PRINT_I(WIDE), + CHECK_AND_PRINT_I(40MHZ), + CHECK_AND_PRINT_I(80MHZ), + CHECK_AND_PRINT_I(160MHZ), channel->max_power, ((ch_flags & NVM_CHANNEL_IBSS) && !(ch_flags & NVM_CHANNEL_RADAR)) @@ -370,6 +376,10 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg, max_ampdu_exponent << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; + if (data->vht160_supported) + vht_cap->cap |= + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ; + if (cfg->vht_mu_mimo_supported) vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;