From: Anders Blomdell Date: Wed, 18 Feb 2009 01:12:51 +0000 (-0800) Subject: Staging: comedi: add daqboard2000 driver X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=48a4d521f32418c957e49d0270c9f5f99614b0e0;p=linux-beck.git Staging: comedi: add daqboard2000 driver hardware driver for IOtech DAQboard/2000 From: Anders Blomdell Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c new file mode 100644 index 000000000000..04c490fd459f --- /dev/null +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -0,0 +1,877 @@ +/* + comedi/drivers/daqboard2000.c + hardware driver for IOtech DAQboard/2000 + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1999 Anders Blomdell + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ +/* +Driver: daqboard2000 +Description: IOTech DAQBoard/2000 +Author: Anders Blomdell +Status: works +Updated: Mon, 14 Apr 2008 15:28:52 +0100 +Devices: [IOTech] DAQBoard/2000 (daqboard2000) + +Much of the functionality of this driver was determined from reading +the source code for the Windows driver. + +The FPGA on the board requires initialization code, which can +be loaded by comedi_config using the -i +option. The initialization code is available from http://www.comedi.org +in the comedi_nonfree_firmware tarball. + +Configuration options: + [0] - PCI bus of device (optional) + [1] - PCI slot of device (optional) + If bus/slot is not specified, the first supported + PCI device found will be used. +*/ +/* + This card was obviously never intended to leave the Windows world, + since it lacked all kind of hardware documentation (except for cable + pinouts, plug and pray has something to catch up with yet). + + With some help from our swedish distributor, we got the Windows sourcecode + for the card, and here are the findings so far. + + 1. A good document that describes the PCI interface chip is found at: + http://plx.plxtech.com/download/9080/databook/9080db-106.pdf + + 2. The initialization done so far is: + a. program the FPGA (windows code sans a lot of error messages) + b. + + 3. Analog out seems to work OK with DAC's disabled, if DAC's are enabled, + you have to output values to all enabled DAC's until result appears, I + guess that it has something to do with pacer clocks, but the source + gives me no clues. I'll keep it simple so far. + + 4. Analog in. + Each channel in the scanlist seems to be controlled by four + control words: + + Word0: + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + ! | | | ! | | | ! | | | ! | | | ! + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + + Word1: + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + ! | | | ! | | | ! | | | ! | | | ! + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | | | | | | + +------+------+ | | | | +-- Digital input (??) + | | | | +---- 10 us settling time + | | | +------ Suspend acquisition (last to scan) + | | +-------- Simultaneous sample and hold + | +---------- Signed data format + +------------------------- Correction offset low + + Word2: + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + ! | | | ! | | | ! | | | ! | | | ! + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | | | | | | | | | + +-----+ +--+--+ +++ +++ +--+--+ + | | | | +----- Expansion channel + | | | +----------- Expansion gain + | | +--------------- Channel (low) + | +--------------------- Correction offset high + +----------------------------- Correction gain low + Word3: + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + ! | | | ! | | | ! | | | ! | | | ! + +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + | | | | | | | | | + +------+------+ | | +-+-+ | | +-- Low bank enable + | | | | | +---- High bank enable + | | | | +------ Hi/low select + | | | +---------- Gain (1,?,2,4,8,16,32,64) + | | +-------------- differential/single ended + | +---------------- Unipolar + +------------------------- Correction gain high + + + + 999. The card seems to have an incredible amount of capabilities, but + trying to reverse engineer them from the Windows source is beyond my + patience. + + + */ + +#include "../comedidev.h" + +#include + +#include "comedi_pci.h" +#include "8255.h" + +#define DAQBOARD2000_SUBSYSTEM_IDS2 0x00021616 /* Daqboard/2000 - 2 Dacs */ +#define DAQBOARD2000_SUBSYSTEM_IDS4 0x00041616 /* Daqboard/2000 - 4 Dacs */ + +#define DAQBOARD2000_DAQ_SIZE 0x1002 +#define DAQBOARD2000_PLX_SIZE 0x100 + +// Initialization bits for the Serial EEPROM Control Register +#define DAQBOARD2000_SECRProgPinHi 0x8001767e +#define DAQBOARD2000_SECRProgPinLo 0x8000767e +#define DAQBOARD2000_SECRLocalBusHi 0xc000767e +#define DAQBOARD2000_SECRLocalBusLo 0x8000767e +#define DAQBOARD2000_SECRReloadHi 0xa000767e +#define DAQBOARD2000_SECRReloadLo 0x8000767e + +// SECR status bits +#define DAQBOARD2000_EEPROM_PRESENT 0x10000000 + +// CPLD status bits +#define DAQBOARD2000_CPLD_INIT 0x0002 +#define DAQBOARD2000_CPLD_DONE 0x0004 + +// Available ranges +static const comedi_lrange range_daqboard2000_ai = { 13, { + RANGE(-10, 10), + RANGE(-5, 5), + RANGE(-2.5, 2.5), + RANGE(-1.25, 1.25), + RANGE(-0.625, 0.625), + RANGE(-0.3125, 0.3125), + RANGE(-0.156, 0.156), + RANGE(0, 10), + RANGE(0, 5), + RANGE(0, 2.5), + RANGE(0, 1.25), + RANGE(0, 0.625), + RANGE(0, 0.3125) + } +}; + +static const comedi_lrange range_daqboard2000_ao = { 1, { + RANGE(-10, 10) + } +}; + +typedef struct daqboard2000_hw { + volatile u16 acqControl; // 0x00 + volatile u16 acqScanListFIFO; // 0x02 + volatile u32 acqPacerClockDivLow; // 0x04 + + volatile u16 acqScanCounter; // 0x08 + volatile u16 acqPacerClockDivHigh; // 0x0a + volatile u16 acqTriggerCount; // 0x0c + volatile u16 fill2; // 0x0e + volatile u16 acqResultsFIFO; // 0x10 + volatile u16 fill3; // 0x12 + volatile u16 acqResultsShadow; // 0x14 + volatile u16 fill4; // 0x16 + volatile u16 acqAdcResult; // 0x18 + volatile u16 fill5; // 0x1a + volatile u16 dacScanCounter; // 0x1c + volatile u16 fill6; // 0x1e + + volatile u16 dacControl; // 0x20 + volatile u16 fill7; // 0x22 + volatile s16 dacFIFO; // 0x24 + volatile u16 fill8[2]; // 0x26 + volatile u16 dacPacerClockDiv; // 0x2a + volatile u16 refDacs; // 0x2c + volatile u16 fill9; // 0x2e + + volatile u16 dioControl; // 0x30 + volatile s16 dioP3hsioData; // 0x32 + volatile u16 dioP3Control; // 0x34 + volatile u16 calEepromControl; // 0x36 + volatile s16 dacSetting[4]; // 0x38 + volatile s16 dioP2ExpansionIO8Bit[32]; // 0x40 + + volatile u16 ctrTmrControl; // 0x80 + volatile u16 fill10[3]; // 0x82 + volatile s16 ctrInput[4]; // 0x88 + volatile u16 fill11[8]; // 0x90 + volatile u16 timerDivisor[2]; // 0xa0 + volatile u16 fill12[6]; // 0xa4 + + volatile u16 dmaControl; // 0xb0 + volatile u16 trigControl; // 0xb2 + volatile u16 fill13[2]; // 0xb4 + volatile u16 calEeprom; // 0xb8 + volatile u16 acqDigitalMark; // 0xba + volatile u16 trigDacs; // 0xbc + volatile u16 fill14; // 0xbe + volatile s16 dioP2ExpansionIO16Bit[32]; // 0xc0 +} daqboard2000_hw; + +/* Scan Sequencer programming */ +#define DAQBOARD2000_SeqStartScanList 0x0011 +#define DAQBOARD2000_SeqStopScanList 0x0010 + +// Prepare for acquisition +#define DAQBOARD2000_AcqResetScanListFifo 0x0004 +#define DAQBOARD2000_AcqResetResultsFifo 0x0002 +#define DAQBOARD2000_AcqResetConfigPipe 0x0001 + +// Acqusition status bits +#define DAQBOARD2000_AcqResultsFIFOMore1Sample 0x0001 +#define DAQBOARD2000_AcqResultsFIFOHasValidData 0x0002 +#define DAQBOARD2000_AcqResultsFIFOOverrun 0x0004 +#define DAQBOARD2000_AcqLogicScanning 0x0008 +#define DAQBOARD2000_AcqConfigPipeFull 0x0010 +#define DAQBOARD2000_AcqScanListFIFOEmpty 0x0020 +#define DAQBOARD2000_AcqAdcNotReady 0x0040 +#define DAQBOARD2000_ArbitrationFailure 0x0080 +#define DAQBOARD2000_AcqPacerOverrun 0x0100 +#define DAQBOARD2000_DacPacerOverrun 0x0200 +#define DAQBOARD2000_AcqHardwareError 0x01c0 + +// Scan Sequencer programming +#define DAQBOARD2000_SeqStartScanList 0x0011 +#define DAQBOARD2000_SeqStopScanList 0x0010 + +/* Pacer Clock Control */ +#define DAQBOARD2000_AdcPacerInternal 0x0030 +#define DAQBOARD2000_AdcPacerExternal 0x0032 +#define DAQBOARD2000_AdcPacerEnable 0x0031 +#define DAQBOARD2000_AdcPacerEnableDacPacer 0x0034 +#define DAQBOARD2000_AdcPacerDisable 0x0030 +#define DAQBOARD2000_AdcPacerNormalMode 0x0060 +#define DAQBOARD2000_AdcPacerCompatibilityMode 0x0061 +#define DAQBOARD2000_AdcPacerInternalOutEnable 0x0008 +#define DAQBOARD2000_AdcPacerExternalRising 0x0100 + +// DAC status +#define DAQBOARD2000_DacFull 0x0001 +#define DAQBOARD2000_RefBusy 0x0002 +#define DAQBOARD2000_TrgBusy 0x0004 +#define DAQBOARD2000_CalBusy 0x0008 +#define DAQBOARD2000_Dac0Busy 0x0010 +#define DAQBOARD2000_Dac1Busy 0x0020 +#define DAQBOARD2000_Dac2Busy 0x0040 +#define DAQBOARD2000_Dac3Busy 0x0080 + +// DAC control +#define DAQBOARD2000_Dac0Enable 0x0021 +#define DAQBOARD2000_Dac1Enable 0x0031 +#define DAQBOARD2000_Dac2Enable 0x0041 +#define DAQBOARD2000_Dac3Enable 0x0051 +#define DAQBOARD2000_DacEnableBit 0x0001 +#define DAQBOARD2000_Dac0Disable 0x0020 +#define DAQBOARD2000_Dac1Disable 0x0030 +#define DAQBOARD2000_Dac2Disable 0x0040 +#define DAQBOARD2000_Dac3Disable 0x0050 +#define DAQBOARD2000_DacResetFifo 0x0004 +#define DAQBOARD2000_DacPatternDisable 0x0060 +#define DAQBOARD2000_DacPatternEnable 0x0061 +#define DAQBOARD2000_DacSelectSignedData 0x0002 +#define DAQBOARD2000_DacSelectUnsignedData 0x0000 + +/* Trigger Control */ +#define DAQBOARD2000_TrigAnalog 0x0000 +#define DAQBOARD2000_TrigTTL 0x0010 +#define DAQBOARD2000_TrigTransHiLo 0x0004 +#define DAQBOARD2000_TrigTransLoHi 0x0000 +#define DAQBOARD2000_TrigAbove 0x0000 +#define DAQBOARD2000_TrigBelow 0x0004 +#define DAQBOARD2000_TrigLevelSense 0x0002 +#define DAQBOARD2000_TrigEdgeSense 0x0000 +#define DAQBOARD2000_TrigEnable 0x0001 +#define DAQBOARD2000_TrigDisable 0x0000 + +// Reference Dac Selection +#define DAQBOARD2000_PosRefDacSelect 0x0100 +#define DAQBOARD2000_NegRefDacSelect 0x0000 + +static int daqboard2000_attach(comedi_device * dev, comedi_devconfig * it); +static int daqboard2000_detach(comedi_device * dev); + +static comedi_driver driver_daqboard2000 = { + driver_name:"daqboard2000", + module:THIS_MODULE, + attach:daqboard2000_attach, + detach:daqboard2000_detach, +}; + +typedef struct { + const char *name; + int id; +} boardtype; +static const boardtype boardtypes[] = { + {"ids2", DAQBOARD2000_SUBSYSTEM_IDS2}, + {"ids4", DAQBOARD2000_SUBSYSTEM_IDS4}, +}; + +#define n_boardtypes (sizeof(boardtypes)/sizeof(boardtype)) +#define this_board ((const boardtype *)dev->board_ptr) + +static DEFINE_PCI_DEVICE_TABLE(daqboard2000_pci_table) = { + {0x1616, 0x0409, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, daqboard2000_pci_table); + +typedef struct { + enum { + card_daqboard_2000 + } card; + struct pci_dev *pci_dev; + void *daq; + void *plx; + int got_regions; + lsampl_t ao_readback[2]; +} daqboard2000_private; + +#define devpriv ((daqboard2000_private*)dev->private) + +static void writeAcqScanListEntry(comedi_device * dev, u16 entry) +{ + daqboard2000_hw *fpga = devpriv->daq; + +// comedi_udelay(4); + fpga->acqScanListFIFO = entry & 0x00ff; +// comedi_udelay(4); + fpga->acqScanListFIFO = (entry >> 8) & 0x00ff; +} + +static void setup_sampling(comedi_device * dev, int chan, int gain) +{ + u16 word0, word1, word2, word3; + + /* Channel 0-7 diff, channel 8-23 single ended */ + word0 = 0; + word1 = 0x0004; /* Last scan */ + word2 = (chan << 6) & 0x00c0; + switch (chan / 4) { + case 0: + word3 = 0x0001; + break; + case 1: + word3 = 0x0002; + break; + case 2: + word3 = 0x0005; + break; + case 3: + word3 = 0x0006; + break; + case 4: + word3 = 0x0041; + break; + case 5: + word3 = 0x0042; + break; + default: + word3 = 0; + break; + } +/* + dev->eeprom.correctionDACSE[i][j][k].offset = 0x800; + dev->eeprom.correctionDACSE[i][j][k].gain = 0xc00; +*/ + /* These should be read from EEPROM */ + word2 |= 0x0800; + word3 |= 0xc000; +/* printk("%d %4.4x %4.4x %4.4x %4.4x\n", chan, word0, word1, word2, word3);*/ + writeAcqScanListEntry(dev, word0); + writeAcqScanListEntry(dev, word1); + writeAcqScanListEntry(dev, word2); + writeAcqScanListEntry(dev, word3); +} + +static int daqboard2000_ai_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + daqboard2000_hw *fpga = devpriv->daq; + int gain, chan, timeout; + + fpga->acqControl = + DAQBOARD2000_AcqResetScanListFifo | + DAQBOARD2000_AcqResetResultsFifo | + DAQBOARD2000_AcqResetConfigPipe; + + /* If pacer clock is not set to some high value (> 10 us), we + risk multiple samples to be put into the result FIFO. */ + fpga->acqPacerClockDivLow = 1000000; /* 1 second, should be long enough */ + fpga->acqPacerClockDivHigh = 0; + + gain = CR_RANGE(insn->chanspec); + chan = CR_CHAN(insn->chanspec); + + /* This doesn't look efficient. I decided to take the conservative + * approach when I did the insn conversion. Perhaps it would be + * better to have broken it completely, then someone would have been + * forced to fix it. --ds */ + for (i = 0; i < insn->n; i++) { + setup_sampling(dev, chan, gain); + /* Enable reading from the scanlist FIFO */ + fpga->acqControl = DAQBOARD2000_SeqStartScanList; + for (timeout = 0; timeout < 20; timeout++) { + if (fpga->acqControl & DAQBOARD2000_AcqConfigPipeFull) { + break; + } + //comedi_udelay(2); + } + fpga->acqControl = DAQBOARD2000_AdcPacerEnable; + for (timeout = 0; timeout < 20; timeout++) { + if (fpga->acqControl & DAQBOARD2000_AcqLogicScanning) { + break; + } + //comedi_udelay(2); + } + for (timeout = 0; timeout < 20; timeout++) { + if (fpga-> + acqControl & + DAQBOARD2000_AcqResultsFIFOHasValidData) { + break; + } + //comedi_udelay(2); + } + data[i] = fpga->acqResultsFIFO; + fpga->acqControl = DAQBOARD2000_AdcPacerDisable; + fpga->acqControl = DAQBOARD2000_SeqStopScanList; + } + + return i; +} + +static int daqboard2000_ao_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); + + for (i = 0; i < insn->n; i++) { + data[i] = devpriv->ao_readback[chan]; + } + + return i; +} + +static int daqboard2000_ao_insn_write(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + int chan = CR_CHAN(insn->chanspec); + daqboard2000_hw *fpga = devpriv->daq; + int timeout; + + for (i = 0; i < insn->n; i++) { + /* + * OK, since it works OK without enabling the DAC's, let's keep + * it as simple as possible... + */ + //fpga->dacControl = (chan + 2) * 0x0010 | 0x0001; comedi_udelay(1000); + fpga->dacSetting[chan] = data[i]; + for (timeout = 0; timeout < 20; timeout++) { + if ((fpga->dacControl & ((chan + 1) * 0x0010)) == 0) { + break; + } + //comedi_udelay(2); + } + devpriv->ao_readback[chan] = data[i]; + /* + * Since we never enabled the DAC's, we don't need to disable it... + * fpga->dacControl = (chan + 2) * 0x0010 | 0x0000; comedi_udelay(1000); + */ + } + + return i; +} + +static void daqboard2000_resetLocalBus(comedi_device * dev) +{ + printk("daqboard2000_resetLocalBus\n"); + writel(DAQBOARD2000_SECRLocalBusHi, devpriv->plx + 0x6c); + comedi_udelay(10000); + writel(DAQBOARD2000_SECRLocalBusLo, devpriv->plx + 0x6c); + comedi_udelay(10000); +} + +static void daqboard2000_reloadPLX(comedi_device * dev) +{ + printk("daqboard2000_reloadPLX\n"); + writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c); + comedi_udelay(10000); + writel(DAQBOARD2000_SECRReloadHi, devpriv->plx + 0x6c); + comedi_udelay(10000); + writel(DAQBOARD2000_SECRReloadLo, devpriv->plx + 0x6c); + comedi_udelay(10000); +} + +static void daqboard2000_pulseProgPin(comedi_device * dev) +{ + printk("daqboard2000_pulseProgPin 1\n"); + writel(DAQBOARD2000_SECRProgPinHi, devpriv->plx + 0x6c); + comedi_udelay(10000); + writel(DAQBOARD2000_SECRProgPinLo, devpriv->plx + 0x6c); + comedi_udelay(10000); /* Not in the original code, but I like symmetry... */ +} + +static int daqboard2000_pollCPLD(comedi_device * dev, int mask) +{ + int result = 0; + int i; + int cpld; + + /* timeout after 50 tries -> 5ms */ + for (i = 0; i < 50; i++) { + cpld = readw(devpriv->daq + 0x1000); + if ((cpld & mask) == mask) { + result = 1; + break; + } + comedi_udelay(100); + } + comedi_udelay(5); + return result; +} + +static int daqboard2000_writeCPLD(comedi_device * dev, int data) +{ + int result = 0; + + comedi_udelay(10); + writew(data, devpriv->daq + 0x1000); + if ((readw(devpriv->daq + 0x1000) & DAQBOARD2000_CPLD_INIT) == + DAQBOARD2000_CPLD_INIT) { + result = 1; + } + return result; +} + +static int initialize_daqboard2000(comedi_device * dev, + unsigned char *cpld_array, int len) +{ + int result = -EIO; + /* Read the serial EEPROM control register */ + int secr; + int retry; + int i; + + /* Check to make sure the serial eeprom is present on the board */ + secr = readl(devpriv->plx + 0x6c); + if (!(secr & DAQBOARD2000_EEPROM_PRESENT)) { +#ifdef DEBUG_EEPROM + printk("no serial eeprom\n"); +#endif + return -EIO; + } + + for (retry = 0; retry < 3; retry++) { +#ifdef DEBUG_EEPROM + printk("Programming EEPROM try %x\n", retry); +#endif + + daqboard2000_resetLocalBus(dev); + daqboard2000_reloadPLX(dev); + daqboard2000_pulseProgPin(dev); + if (daqboard2000_pollCPLD(dev, DAQBOARD2000_CPLD_INIT)) { + for (i = 0; i < len; i++) { + if (cpld_array[i] == 0xff + && cpld_array[i + 1] == 0x20) { +#ifdef DEBUG_EEPROM + printk("Preamble found at %d\n", i); +#endif + break; + } + } + for (; i < len; i += 2) { + int data = + (cpld_array[i] << 8) + cpld_array[i + + 1]; + if (!daqboard2000_writeCPLD(dev, data)) { + break; + } + } + if (i >= len) { +#ifdef DEBUG_EEPROM + printk("Programmed\n"); +#endif + daqboard2000_resetLocalBus(dev); + daqboard2000_reloadPLX(dev); + result = 0; + break; + } + } + } + return result; +} + +static void daqboard2000_adcStopDmaTransfer(comedi_device * dev) +{ +/* printk("Implement: daqboard2000_adcStopDmaTransfer\n");*/ +} + +static void daqboard2000_adcDisarm(comedi_device * dev) +{ + daqboard2000_hw *fpga = devpriv->daq; + + /* Disable hardware triggers */ + comedi_udelay(2); + fpga->trigControl = DAQBOARD2000_TrigAnalog | DAQBOARD2000_TrigDisable; + comedi_udelay(2); + fpga->trigControl = DAQBOARD2000_TrigTTL | DAQBOARD2000_TrigDisable; + + /* Stop the scan list FIFO from loading the configuration pipe */ + comedi_udelay(2); + fpga->acqControl = DAQBOARD2000_SeqStopScanList; + + /* Stop the pacer clock */ + comedi_udelay(2); + fpga->acqControl = DAQBOARD2000_AdcPacerDisable; + + /* Stop the input dma (abort channel 1) */ + daqboard2000_adcStopDmaTransfer(dev); +} + +static void daqboard2000_activateReferenceDacs(comedi_device * dev) +{ + daqboard2000_hw *fpga = devpriv->daq; + int timeout; + + // Set the + reference dac value in the FPGA + fpga->refDacs = 0x80 | DAQBOARD2000_PosRefDacSelect; + for (timeout = 0; timeout < 20; timeout++) { + if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) { + break; + } + comedi_udelay(2); + } +/* printk("DAQBOARD2000_PosRefDacSelect %d\n", timeout);*/ + + // Set the - reference dac value in the FPGA + fpga->refDacs = 0x80 | DAQBOARD2000_NegRefDacSelect; + for (timeout = 0; timeout < 20; timeout++) { + if ((fpga->dacControl & DAQBOARD2000_RefBusy) == 0) { + break; + } + comedi_udelay(2); + } +/* printk("DAQBOARD2000_NegRefDacSelect %d\n", timeout);*/ +} + +static void daqboard2000_initializeCtrs(comedi_device * dev) +{ +/* printk("Implement: daqboard2000_initializeCtrs\n");*/ +} + +static void daqboard2000_initializeTmrs(comedi_device * dev) +{ +/* printk("Implement: daqboard2000_initializeTmrs\n");*/ +} + +static void daqboard2000_dacDisarm(comedi_device * dev) +{ +/* printk("Implement: daqboard2000_dacDisarm\n");*/ +} + +static void daqboard2000_initializeAdc(comedi_device * dev) +{ + daqboard2000_adcDisarm(dev); + daqboard2000_activateReferenceDacs(dev); + daqboard2000_initializeCtrs(dev); + daqboard2000_initializeTmrs(dev); +} + +static void daqboard2000_initializeDac(comedi_device * dev) +{ + daqboard2000_dacDisarm(dev); +} + +/* +The test command, REMOVE!!: + +rmmod daqboard2000 ; rmmod comedi; make install ; modprobe daqboard2000; /usr/sbin/comedi_config /dev/comedi0 daqboard/2000 ; tail -40 /var/log/messages +*/ + +static int daqboard2000_8255_cb(int dir, int port, int data, + unsigned long ioaddr) +{ + int result = 0; + if (dir) { + writew(data, ((void *)ioaddr) + port * 2); + result = 0; + } else { + result = readw(((void *)ioaddr) + port * 2); + } +/* + printk("daqboard2000_8255_cb %x %d %d %2.2x -> %2.2x\n", + arg, dir, port, data, result); +*/ + return result; +} + +static int daqboard2000_attach(comedi_device * dev, comedi_devconfig * it) +{ + int result = 0; + comedi_subdevice *s; + struct pci_dev *card = NULL; + void *aux_data; + unsigned int aux_len; + int bus, slot; + + printk("comedi%d: daqboard2000:", dev->minor); + + bus = it->options[0]; + slot = it->options[1]; + + result = alloc_private(dev, sizeof(daqboard2000_private)); + if (result < 0) { + return -ENOMEM; + } + for (card = pci_get_device(0x1616, 0x0409, NULL); + card != NULL; + card = pci_get_device(0x1616, 0x0409, card)) { + if (bus || slot) { + /* requested particular bus/slot */ + if (card->bus->number != bus || + PCI_SLOT(card->devfn) != slot) { + continue; + } + } + break; /* found one */ + } + if (!card) { + if (bus || slot) + printk(" no daqboard2000 found at bus/slot: %d/%d\n", + bus, slot); + else + printk(" no daqboard2000 found\n"); + return -EIO; + } else { + u32 id; + int i; + devpriv->pci_dev = card; + id = ((u32) card->subsystem_device << 16) | card-> + subsystem_vendor; + for (i = 0; i < n_boardtypes; i++) { + if (boardtypes[i].id == id) { + printk(" %s", boardtypes[i].name); + dev->board_ptr = boardtypes + i; + } + } + if (!dev->board_ptr) { + printk(" unknown subsystem id %08x (pretend it is an ids2)", id); + dev->board_ptr = boardtypes; + } + } + + if ((result = comedi_pci_enable(card, "daqboard2000")) < 0) { + printk(" failed to enable PCI device and request regions\n"); + return -EIO; + } + devpriv->got_regions = 1; + devpriv->plx = + ioremap(pci_resource_start(card, 0), DAQBOARD2000_PLX_SIZE); + devpriv->daq = + ioremap(pci_resource_start(card, 2), DAQBOARD2000_DAQ_SIZE); + if (!devpriv->plx || !devpriv->daq) { + return -ENOMEM; + } + + result = alloc_subdevices(dev, 3); + if (result < 0) + goto out; + + readl(devpriv->plx + 0x6c); + + /* + u8 interrupt; + Windows code does restore interrupts, but since we don't use them... + pci_read_config_byte(card, PCI_INTERRUPT_LINE, &interrupt); + printk("Interrupt before is: %x\n", interrupt); + */ + + aux_data = comedi_aux_data(it->options, 0); + aux_len = it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]; + + if (aux_data && aux_len) { + result = initialize_daqboard2000(dev, aux_data, aux_len); + } else { + printk("no FPGA initialization code, aborting\n"); + result = -EIO; + } + if (result < 0) + goto out; + daqboard2000_initializeAdc(dev); + daqboard2000_initializeDac(dev); + /* + Windows code does restore interrupts, but since we don't use them... + pci_read_config_byte(card, PCI_INTERRUPT_LINE, &interrupt); + printk("Interrupt after is: %x\n", interrupt); + */ + + dev->iobase = (unsigned long)devpriv->daq; + + dev->board_name = this_board->name; + + s = dev->subdevices + 0; + /* ai subdevice */ + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND; + s->n_chan = 24; + s->maxdata = 0xffff; + s->insn_read = daqboard2000_ai_insn_read; + s->range_table = &range_daqboard2000_ai; + + s = dev->subdevices + 1; + /* ao subdevice */ + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = 2; + s->maxdata = 0xffff; + s->insn_read = daqboard2000_ao_insn_read; + s->insn_write = daqboard2000_ao_insn_write; + s->range_table = &range_daqboard2000_ao; + + s = dev->subdevices + 2; + result = subdev_8255_init(dev, s, daqboard2000_8255_cb, + (unsigned long)(dev->iobase + 0x40)); + + printk("\n"); + out: + return result; +} + +static int daqboard2000_detach(comedi_device * dev) +{ + printk("comedi%d: daqboard2000: remove\n", dev->minor); + + if (dev->subdevices) + subdev_8255_cleanup(dev, dev->subdevices + 2); + + if (dev->irq) { + free_irq(dev->irq, dev); + } + if (devpriv) { + if (devpriv->daq) + iounmap(devpriv->daq); + if (devpriv->plx) + iounmap(devpriv->plx); + if (devpriv->pci_dev) { + if (devpriv->got_regions) { + comedi_pci_disable(devpriv->pci_dev); + } + pci_dev_put(devpriv->pci_dev); + } + } + return 0; +} + +COMEDI_PCI_INITCLEANUP(driver_daqboard2000, daqboard2000_pci_table);