From: H Hartley Sweeten Date: Mon, 2 May 2016 17:11:45 +0000 (-0700) Subject: staging: comedi: mite: do mite_steup() as part of mite_attach() X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=48f2c1aecfbcfe5ab4b2a003dee1a469e7c32214;p=linux-beck.git staging: comedi: mite: do mite_steup() as part of mite_attach() Currently all the drivers that use the mite driver have to call mite_setup() after allocating and initializing the mite device with mite_attach(). Move the mite_setup() call into mite_attach() to simplify the drivers a bit and remove the need for the additional inline and exported functions. For aesthetics, move mite_setup2(), and rename it to mite_setup(), so it's near mite_attach(). Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/mite.c b/drivers/staging/comedi/drivers/mite.c index f64c5df23d68..08e9c8ba6447 100644 --- a/drivers/staging/comedi/drivers/mite.c +++ b/drivers/staging/comedi/drivers/mite.c @@ -245,82 +245,6 @@ static unsigned int mite_fifo_size(struct mite *mite, unsigned int channel) return empty_count + full_count; } -int mite_setup2(struct comedi_device *dev, - struct mite *mite, bool use_win1) -{ - resource_size_t daq_phys_addr; - unsigned long length; - int i; - u32 csigr_bits; - unsigned int unknown_dma_burst_bits; - - pci_set_master(mite->pcidev); - - mite->mmio = pci_ioremap_bar(mite->pcidev, 0); - if (!mite->mmio) { - dev_err(dev->class_dev, - "Failed to remap mite io memory address\n"); - return -ENOMEM; - } - - dev->mmio = pci_ioremap_bar(mite->pcidev, 1); - if (!dev->mmio) { - dev_err(dev->class_dev, - "Failed to remap daq io memory address\n"); - return -ENOMEM; - } - daq_phys_addr = pci_resource_start(mite->pcidev, 1); - length = pci_resource_len(mite->pcidev, 1); - - if (use_win1) { - writel(0, mite->mmio + MITE_IODWBSR); - dev_info(dev->class_dev, - "using I/O Window Base Size register 1\n"); - writel(daq_phys_addr | WENAB | - MITE_IODWBSR_1_WSIZE_bits(length), - mite->mmio + MITE_IODWBSR_1); - writel(0, mite->mmio + MITE_IODWCR_1); - } else { - writel(daq_phys_addr | WENAB, mite->mmio + MITE_IODWBSR); - } - /* - * Make sure dma bursts work. I got this from running a bus analyzer - * on a pxi-6281 and a pxi-6713. 6713 powered up with register value - * of 0x61f and bursts worked. 6281 powered up with register value of - * 0x1f and bursts didn't work. The NI windows driver reads the - * register, then does a bitwise-or of 0x600 with it and writes it back. - * - * The bits 0x90180700 in MITE_UNKNOWN_DMA_BURST_REG can be - * written and read back. The bits 0x1f always read as 1. - * The rest always read as zero. - */ - unknown_dma_burst_bits = readl(mite->mmio + MITE_UNKNOWN_DMA_BURST_REG); - unknown_dma_burst_bits |= UNKNOWN_DMA_BURST_ENABLE_BITS; - writel(unknown_dma_burst_bits, mite->mmio + MITE_UNKNOWN_DMA_BURST_REG); - - csigr_bits = readl(mite->mmio + MITE_CSIGR); - mite->num_channels = CSIGR_TO_DMAC(csigr_bits); - if (mite->num_channels > MAX_MITE_DMA_CHANNELS) { - dev_warn(dev->class_dev, - "mite: bug? chip claims to have %i dma channels. Setting to %i.\n", - mite->num_channels, MAX_MITE_DMA_CHANNELS); - mite->num_channels = MAX_MITE_DMA_CHANNELS; - } - dump_chip_signature(csigr_bits); - for (i = 0; i < mite->num_channels; i++) { - writel(CHOR_DMARESET, mite->mmio + MITE_CHOR(i)); - /* disable interrupts */ - writel(CHCR_CLR_DMA_IE | CHCR_CLR_LINKP_IE | CHCR_CLR_SAR_IE | - CHCR_CLR_DONE_IE | CHCR_CLR_MRDY_IE | CHCR_CLR_DRDY_IE | - CHCR_CLR_LC_IE | CHCR_CLR_CONT_RB_IE, - mite->mmio + MITE_CHCR(i)); - } - mite->fifo_size = mite_fifo_size(mite, 0); - dev_info(dev->class_dev, "fifo size is %i.\n", mite->fifo_size); - return 0; -} -EXPORT_SYMBOL_GPL(mite_setup2); - struct mite_ring *mite_alloc_ring(struct mite *mite) { struct mite_ring *ring; @@ -807,31 +731,118 @@ int mite_done(struct mite_channel *mite_chan) } EXPORT_SYMBOL_GPL(mite_done); +static int mite_setup(struct comedi_device *dev, struct mite *mite, + bool use_win1) +{ + resource_size_t daq_phys_addr; + unsigned long length; + int i; + u32 csigr_bits; + unsigned int unknown_dma_burst_bits; + + pci_set_master(mite->pcidev); + + mite->mmio = pci_ioremap_bar(mite->pcidev, 0); + if (!mite->mmio) { + dev_err(dev->class_dev, + "Failed to remap mite io memory address\n"); + return -ENOMEM; + } + + dev->mmio = pci_ioremap_bar(mite->pcidev, 1); + if (!dev->mmio) { + dev_err(dev->class_dev, + "Failed to remap daq io memory address\n"); + return -ENOMEM; + } + daq_phys_addr = pci_resource_start(mite->pcidev, 1); + length = pci_resource_len(mite->pcidev, 1); + + if (use_win1) { + writel(0, mite->mmio + MITE_IODWBSR); + dev_info(dev->class_dev, + "using I/O Window Base Size register 1\n"); + writel(daq_phys_addr | WENAB | + MITE_IODWBSR_1_WSIZE_bits(length), + mite->mmio + MITE_IODWBSR_1); + writel(0, mite->mmio + MITE_IODWCR_1); + } else { + writel(daq_phys_addr | WENAB, mite->mmio + MITE_IODWBSR); + } + /* + * Make sure dma bursts work. I got this from running a bus analyzer + * on a pxi-6281 and a pxi-6713. 6713 powered up with register value + * of 0x61f and bursts worked. 6281 powered up with register value of + * 0x1f and bursts didn't work. The NI windows driver reads the + * register, then does a bitwise-or of 0x600 with it and writes it back. + * + * The bits 0x90180700 in MITE_UNKNOWN_DMA_BURST_REG can be + * written and read back. The bits 0x1f always read as 1. + * The rest always read as zero. + */ + unknown_dma_burst_bits = readl(mite->mmio + MITE_UNKNOWN_DMA_BURST_REG); + unknown_dma_burst_bits |= UNKNOWN_DMA_BURST_ENABLE_BITS; + writel(unknown_dma_burst_bits, mite->mmio + MITE_UNKNOWN_DMA_BURST_REG); + + csigr_bits = readl(mite->mmio + MITE_CSIGR); + mite->num_channels = CSIGR_TO_DMAC(csigr_bits); + if (mite->num_channels > MAX_MITE_DMA_CHANNELS) { + dev_warn(dev->class_dev, + "mite: bug? chip claims to have %i dma channels. Setting to %i.\n", + mite->num_channels, MAX_MITE_DMA_CHANNELS); + mite->num_channels = MAX_MITE_DMA_CHANNELS; + } + dump_chip_signature(csigr_bits); + for (i = 0; i < mite->num_channels; i++) { + writel(CHOR_DMARESET, mite->mmio + MITE_CHOR(i)); + /* disable interrupts */ + writel(CHCR_CLR_DMA_IE | CHCR_CLR_LINKP_IE | CHCR_CLR_SAR_IE | + CHCR_CLR_DONE_IE | CHCR_CLR_MRDY_IE | CHCR_CLR_DRDY_IE | + CHCR_CLR_LC_IE | CHCR_CLR_CONT_RB_IE, + mite->mmio + MITE_CHCR(i)); + } + mite->fifo_size = mite_fifo_size(mite, 0); + dev_info(dev->class_dev, "fifo size is %i.\n", mite->fifo_size); + return 0; +} + /** * mite_attach() - Allocate and initialize a MITE device for a comedi driver. * @dev: COMEDI device. + * @use_win1: flag to use I/O Window 1 instead of I/O Window 0. * * Called by a COMEDI drivers (*auto_attach). * * Returns a pointer to the MITE device on success, or NULL if the MITE cannot - * be allocated. + * be allocated or remapped. */ -struct mite *mite_attach(struct comedi_device *dev) +struct mite *mite_attach(struct comedi_device *dev, bool use_win1) { struct pci_dev *pcidev = comedi_to_pci_dev(dev); struct mite *mite; unsigned int i; + int ret; mite = kzalloc(sizeof(*mite), GFP_KERNEL); - if (mite) { - spin_lock_init(&mite->lock); - mite->pcidev = pcidev; - for (i = 0; i < MAX_MITE_DMA_CHANNELS; ++i) { - mite->channels[i].mite = mite; - mite->channels[i].channel = i; - mite->channels[i].done = 1; - } + if (!mite) + return NULL; + + spin_lock_init(&mite->lock); + mite->pcidev = pcidev; + for (i = 0; i < MAX_MITE_DMA_CHANNELS; ++i) { + mite->channels[i].mite = mite; + mite->channels[i].channel = i; + mite->channels[i].done = 1; } + + ret = mite_setup(dev, mite, use_win1); + if (ret) { + if (mite->mmio) + iounmap(mite->mmio); + kfree(mite); + return NULL; + } + return mite; } EXPORT_SYMBOL_GPL(mite_attach); diff --git a/drivers/staging/comedi/drivers/mite.h b/drivers/staging/comedi/drivers/mite.h index d2643e4a4c5b..95b645e3672f 100644 --- a/drivers/staging/comedi/drivers/mite.h +++ b/drivers/staging/comedi/drivers/mite.h @@ -60,14 +60,6 @@ struct mite { spinlock_t lock; }; -int mite_setup2(struct comedi_device *, struct mite *, bool use_win1); - -static inline int mite_setup(struct comedi_device *dev, - struct mite *mite) -{ - return mite_setup2(dev, mite, false); -} - struct mite_ring *mite_alloc_ring(struct mite *); void mite_free_ring(struct mite_ring *ring); struct mite_channel *mite_request_channel_in_range(struct mite *, @@ -98,7 +90,7 @@ int mite_buf_change(struct mite_ring *, struct comedi_subdevice *); int mite_init_ring_descriptors(struct mite_ring *, struct comedi_subdevice *, unsigned int nbytes); -struct mite *mite_attach(struct comedi_device *); +struct mite *mite_attach(struct comedi_device *, bool use_win1); void mite_detach(struct mite *); /* diff --git a/drivers/staging/comedi/drivers/ni_660x.c b/drivers/staging/comedi/drivers/ni_660x.c index de75598554f2..0dcb826a9f1f 100644 --- a/drivers/staging/comedi/drivers/ni_660x.c +++ b/drivers/staging/comedi/drivers/ni_660x.c @@ -724,14 +724,10 @@ static int ni_660x_auto_attach(struct comedi_device *dev, return ret; devpriv = dev->private; - devpriv->mite = mite_attach(dev); + devpriv->mite = mite_attach(dev, true); /* use win1 */ if (!devpriv->mite) return -ENOMEM; - ret = mite_setup2(dev, devpriv->mite, true); - if (ret < 0) - return ret; - ret = ni_660x_alloc_mite_rings(dev); if (ret < 0) return ret; diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c index 1e30792b6071..02a532990979 100644 --- a/drivers/staging/comedi/drivers/ni_pcidio.c +++ b/drivers/staging/comedi/drivers/ni_pcidio.c @@ -897,14 +897,10 @@ static int nidio_auto_attach(struct comedi_device *dev, spin_lock_init(&devpriv->mite_channel_lock); - devpriv->mite = mite_attach(dev); + devpriv->mite = mite_attach(dev, false); /* use win0 */ if (!devpriv->mite) return -ENOMEM; - ret = mite_setup(dev, devpriv->mite); - if (ret < 0) - return ret; - devpriv->di_mite_ring = mite_alloc_ring(devpriv->mite); if (!devpriv->di_mite_ring) return -ENOMEM; diff --git a/drivers/staging/comedi/drivers/ni_pcimio.c b/drivers/staging/comedi/drivers/ni_pcimio.c index 0408ba3afa07..344aa343e5e1 100644 --- a/drivers/staging/comedi/drivers/ni_pcimio.c +++ b/drivers/staging/comedi/drivers/ni_pcimio.c @@ -1172,7 +1172,7 @@ static int pcimio_auto_attach(struct comedi_device *dev, return ret; devpriv = dev->private; - devpriv->mite = mite_attach(dev); + devpriv->mite = mite_attach(dev, false); /* use win0 */ if (!devpriv->mite) return -ENOMEM; @@ -1197,10 +1197,6 @@ static int pcimio_auto_attach(struct comedi_device *dev, if (board->reg_type == ni_reg_6713) devpriv->is_6713 = 1; - ret = mite_setup(dev, devpriv->mite); - if (ret < 0) - return ret; - devpriv->ai_mite_ring = mite_alloc_ring(devpriv->mite); if (!devpriv->ai_mite_ring) return -ENOMEM;