From: Jon Hunter Date: Fri, 7 Oct 2011 06:53:01 +0000 (-0600) Subject: ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rate X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=49642ac816a714f3037b7cd6401a46c8fe46e795;p=mv-sheeva.git ARM: OMAP3+: dpll: use DPLLs recalc function instead of omap2_get_dpll_rate This is a continuation of Mike Turquette's patch "OMAP3+: use DPLL's round_rate when setting rate". omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call omap2_get_dpll_rate() explicitly. It may be necessary for some DPLLs to use a different function and so use the DPLLs recalc() function pointer instead. An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier in addition to the usual MN multipler and dividers and therefore uses a different round_rate and recalc function. Signed-off-by: Jon Hunter Cc: Mike Turquette Cc: Misael Lopez Cruz [paul@pwsan.com: merged this patch with Mike's "use clock's recalc in DPLL handling" patch; also reported by Misael] Signed-off-by: Paul Walmsley --- diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index 73a1595c5f2..fc56745676f 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -390,7 +390,8 @@ int omap3_noncore_dpll_enable(struct clk *clk) * propagating? */ if (!r) - clk->rate = omap2_get_dpll_rate(clk); + clk->rate = (clk->recalc) ? clk->recalc(clk) : + omap2_get_dpll_rate(clk); return r; } @@ -424,6 +425,7 @@ void omap3_noncore_dpll_disable(struct clk *clk) int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) { struct clk *new_parent = NULL; + unsigned long hw_rate; u16 freqsel = 0; struct dpll_data *dd; int ret; @@ -435,7 +437,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) if (!dd) return -EINVAL; - if (rate == omap2_get_dpll_rate(clk)) + hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk); + if (rate == hw_rate) return 0; /*