From: Ben Skeggs Date: Mon, 23 Jan 2012 23:47:04 +0000 (+1000) Subject: drm/nv50/pm: use hwsq for engine reclocking too X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=496a73bbecb81e6753715995e4519d152f814667;p=linux-beck.git drm/nv50/pm: use hwsq for engine reclocking too Idea from Martin Peres, different implementation by me. v2: Martin Peres: - fix mast calculation Signed-off-by: Ben Skeggs Signed-off-by: Martin Peres --- diff --git a/drivers/gpu/drm/nouveau/nv50_pm.c b/drivers/gpu/drm/nouveau/nv50_pm.c index 109e473fd5f8..0f2632638c92 100644 --- a/drivers/gpu/drm/nouveau/nv50_pm.c +++ b/drivers/gpu/drm/nouveau/nv50_pm.c @@ -354,21 +354,12 @@ nv50_pm_clocks_get(struct drm_device *dev, struct nouveau_pm_level *perflvl) struct nv50_pm_state { struct nouveau_pm_level *perflvl; - + struct hwsq_ucode eclk_hwsq; struct hwsq_ucode mclk_hwsq; u32 mscript; u32 mmast; u32 mctrl; u32 mcoef; - - u32 emast; - u32 nctrl; - u32 ncoef; - u32 sctrl; - u32 scoef; - - u32 amast; - u32 pdivs; }; static u32 @@ -598,10 +589,11 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) { struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_pm_state *info; + struct hwsq_ucode *hwsq; struct pll_lims pll; + u32 out, mast, divs, ctrl; int clk, ret = -EINVAL; int N, M, P1, P2; - u32 out; if (dev_priv->chipset == 0xaa || dev_priv->chipset == 0xac) @@ -622,41 +614,32 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) info->mscript = perflvl->memscript; } - /* core: for the moment at least, always use nvpll */ - clk = calc_pll(dev, 0x4028, &pll, perflvl->core, &N, &M, &P1); - if (clk == 0) - goto error; + divs = read_div(dev); + mast = info->mmast; - info->emast = 0x00000003; - info->nctrl = 0x80000000 | (P1 << 19) | (P1 << 16); - info->ncoef = (N << 8) | M; + /* start building HWSQ script for engine reclocking */ + hwsq = &info->eclk_hwsq; + hwsq_init(hwsq); + hwsq_setf(hwsq, 0x10, 0); /* disable bus access */ + hwsq_op5f(hwsq, 0x00, 0x01); /* wait for access disabled? */ - /* shader: tie to nvclk if possible, otherwise use spll. have to be - * very careful that the shader clock is at least twice the core, or - * some chipsets will be very unhappy. i expect most or all of these - * cases will be handled by tying to nvclk, but it's possible there's - * corners - */ - if (P1-- && perflvl->shader == (perflvl->core << 1)) { - info->emast |= 0x00000020; - info->sctrl = 0x00000000 | (P1 << 19) | (P1 << 16); - info->scoef = nv_rd32(dev, 0x004024); - } else { - clk = calc_pll(dev, 0x4020, &pll, perflvl->shader, &N, &M, &P1); - if (clk == 0) - goto error; + /* vdec/dom6: switch to "safe" clocks temporarily */ + if (perflvl->vdec) { + mast &= ~0x00000c00; + divs &= ~0x00000700; + } - info->emast |= 0x00000030; - info->sctrl = 0x80000000 | (P1 << 19) | (P1 << 16); - info->scoef = (N << 8) | M; + if (perflvl->dom6) { + mast &= ~0x0c000000; + divs &= ~0x00000007; } + hwsq_wr32(hwsq, 0x00c040, mast); + /* vdec: avoid modifying xpll until we know exactly how the other * clock domains work, i suspect at least some of them can also be * tied to xpll... */ - info->amast = nv_rd32(dev, 0x00c040); - info->pdivs = read_div(dev); if (perflvl->vdec) { /* see how close we can get using nvclk as a source */ clk = calc_div(perflvl->core, perflvl->vdec, &P1); @@ -669,16 +652,14 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) out = calc_div(out, perflvl->vdec, &P2); /* select whichever gets us closest */ - info->amast &= ~0x00000c00; - info->pdivs &= ~0x00000700; if (abs((int)perflvl->vdec - clk) <= abs((int)perflvl->vdec - out)) { if (dev_priv->chipset != 0x98) - info->amast |= 0x00000c00; - info->pdivs |= P1 << 8; + mast |= 0x00000c00; + divs |= P1 << 8; } else { - info->amast |= 0x00000800; - info->pdivs |= P2 << 8; + mast |= 0x00000800; + divs |= P2 << 8; } } @@ -686,21 +667,82 @@ nv50_pm_clocks_pre(struct drm_device *dev, struct nouveau_pm_level *perflvl) * of the host clock frequency */ if (perflvl->dom6) { - info->amast &= ~0x0c000000; if (clk_same(perflvl->dom6, read_clk(dev, clk_src_href))) { - info->amast |= 0x00000000; + mast |= 0x00000000; } else if (clk_same(perflvl->dom6, read_clk(dev, clk_src_hclk))) { - info->amast |= 0x08000000; + mast |= 0x08000000; } else { clk = read_clk(dev, clk_src_hclk) * 3; clk = calc_div(clk, perflvl->dom6, &P1); - info->amast |= 0x0c000000; - info->pdivs = (info->pdivs & ~0x00000007) | P1; + mast |= 0x0c000000; + divs |= P1; } } + /* vdec/dom6: complete switch to new clocks */ + switch (dev_priv->chipset) { + case 0x92: + case 0x94: + case 0x96: + hwsq_wr32(hwsq, 0x004800, divs); + break; + default: + hwsq_wr32(hwsq, 0x004700, divs); + break; + } + + hwsq_wr32(hwsq, 0x00c040, mast); + + /* core/shader: make sure sclk/nvclk are disconnected from their + * PLLs (nvclk to dom6, sclk to hclk) + */ + if (dev_priv->chipset < 0x92) + mast = (mast & ~0x001000b0) | 0x00100080; + else + mast = (mast & ~0x000000b3) | 0x00000081; + + hwsq_wr32(hwsq, 0x00c040, mast); + + /* core: for the moment at least, always use nvpll */ + clk = calc_pll(dev, 0x4028, &pll, perflvl->core, &N, &M, &P1); + if (clk == 0) + goto error; + + ctrl = nv_rd32(dev, 0x004028) & ~0xc03f0100; + mast &= ~0x00100000; + mast |= 3; + + hwsq_wr32(hwsq, 0x004028, 0x80000000 | (P1 << 19) | (P1 << 16) | ctrl); + hwsq_wr32(hwsq, 0x00402c, (N << 8) | M); + + /* shader: tie to nvclk if possible, otherwise use spll. have to be + * very careful that the shader clock is at least twice the core, or + * some chipsets will be very unhappy. i expect most or all of these + * cases will be handled by tying to nvclk, but it's possible there's + * corners + */ + ctrl = nv_rd32(dev, 0x004020) & ~0xc03f0100; + + if (P1-- && perflvl->shader == (perflvl->core << 1)) { + hwsq_wr32(hwsq, 0x004020, (P1 << 19) | (P1 << 16) | ctrl); + hwsq_wr32(hwsq, 0x00c040, 0x00000020 | mast); + } else { + clk = calc_pll(dev, 0x4020, &pll, perflvl->shader, &N, &M, &P1); + if (clk == 0) + goto error; + ctrl |= 0x80000000; + + hwsq_wr32(hwsq, 0x004020, (P1 << 19) | (P1 << 16) | ctrl); + hwsq_wr32(hwsq, 0x004024, (N << 8) | M); + hwsq_wr32(hwsq, 0x00c040, 0x00000030 | mast); + } + + hwsq_setf(hwsq, 0x10, 1); /* enable bus access */ + hwsq_op5f(hwsq, 0x00, 0x00); /* wait for access enabled? */ + hwsq_fini(hwsq); + return info; error: kfree(info); @@ -708,7 +750,7 @@ error: } static int -prog_mclk(struct drm_device *dev, struct hwsq_ucode *hwsq) +prog_hwsq(struct drm_device *dev, struct hwsq_ucode *hwsq) { struct drm_nouveau_private *dev_priv = dev->dev_private; u32 hwsq_data, hwsq_kick; @@ -748,20 +790,17 @@ prog_mclk(struct drm_device *dev, struct hwsq_ucode *hwsq) int nv50_pm_clocks_set(struct drm_device *dev, void *data) { - struct drm_nouveau_private *dev_priv = dev->dev_private; struct nv50_pm_state *info = data; struct bit_entry M; - int ret = 0; + int ret = -EBUSY; /* halt and idle execution engines */ nv_mask(dev, 0x002504, 0x00000001, 0x00000001); if (!nv_wait(dev, 0x002504, 0x00000010, 0x00000010)) - goto error; + goto resume; - /* memory: it is *very* important we change this first, the ucode - * we build in pre() now has hardcoded 0xc040 values, which can't - * change before we execute it or the engine clocks may end up - * messed up. + /* program memory clock, if necessary - must come before engine clock + * reprogramming due to how we construct the hwsq scripts in pre() */ if (info->mclk_hwsq.len) { /* execute some scripts that do ??? from the vbios.. */ @@ -775,42 +814,14 @@ nv50_pm_clocks_set(struct drm_device *dev, void *data) nouveau_bios_init_exec(dev, info->mscript); } - ret = prog_mclk(dev, &info->mclk_hwsq); + ret = prog_hwsq(dev, &info->mclk_hwsq); if (ret) goto resume; } - /* reclock vdec/dom6 */ - nv_mask(dev, 0x00c040, 0x00000c00, 0x00000000); - switch (dev_priv->chipset) { - case 0x92: - case 0x94: - case 0x96: - nv_mask(dev, 0x004800, 0x00000707, info->pdivs); - break; - default: - nv_mask(dev, 0x004700, 0x00000707, info->pdivs); - break; - } - nv_mask(dev, 0x00c040, 0x0c000c00, info->amast); + /* program engine clocks */ + ret = prog_hwsq(dev, &info->eclk_hwsq); - /* core/shader: make sure sclk/nvclk are disconnected from their - * plls (nvclk to dom6, sclk to hclk), modify the plls, and - * reconnect sclk/nvclk to their new clock source - */ - if (dev_priv->chipset < 0x92) - nv_mask(dev, 0x00c040, 0x001000b0, 0x00100080); /* grrr! */ - else - nv_mask(dev, 0x00c040, 0x000000b3, 0x00000081); - nv_mask(dev, 0x004020, 0xc03f0100, info->sctrl); - nv_wr32(dev, 0x004024, info->scoef); - nv_mask(dev, 0x004028, 0xc03f0100, info->nctrl); - nv_wr32(dev, 0x00402c, info->ncoef); - nv_mask(dev, 0x00c040, 0x00100033, info->emast); - - goto resume; -error: - ret = -EBUSY; resume: nv_mask(dev, 0x002504, 0x00000001, 0x00000000); kfree(info);