From: Jonathan Cameron Date: Wed, 25 Apr 2012 14:54:56 +0000 (+0100) Subject: staging:iio:documentation pull a few sysfs entries out of main docs. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=49c36dffbd4624fef306162f7ff7458abfc22e1d;p=linux-beck.git staging:iio:documentation pull a few sysfs entries out of main docs. These two attributes are only used in the one driver. Whilst they are fairly general I'm not entirely happy committing to them at this stage. Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio b/drivers/staging/iio/Documentation/sysfs-bus-iio index eec9acbd9648..f7de49479db3 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio @@ -728,24 +728,3 @@ Contact: linux-iio@vger.kernel.org Description: This attribute is used to read the amount of quadrature error present in the device at a given time. - -What: /sys/.../iio:deviceX/ac_excitation_en -KernelVersion: 3.1.0 -Contact: linux-iio@vger.kernel.org -Description: - This attribute, if available, is used to enable the AC - excitation mode found on some converters. In ac excitation mode, - the polarity of the excitation voltage is reversed on - alternate cycles, to eliminate DC errors. - -What: /sys/.../iio:deviceX/bridge_switch_en -KernelVersion: 3.1.0 -Contact: linux-iio@vger.kernel.org -Description: - This attribute, if available, is used to close or open the - bridge power down switch found on some converters. - In bridge applications, such as strain gauges and load cells, - the bridge itself consumes the majority of the current in the - system. To minimize the current consumption of the system, - the bridge can be disconnected (when it is not being used - using the bridge_switch_en attribute. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 new file mode 100644 index 000000000000..1c35c507cc05 --- /dev/null +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 @@ -0,0 +1,20 @@ +What: /sys/.../iio:deviceX/ac_excitation_en +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to enable the AC + excitation mode found on some converters. In ac excitation mode, + the polarity of the excitation voltage is reversed on + alternate cycles, to eliminate DC errors. + +What: /sys/.../iio:deviceX/bridge_switch_en +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to close or open the + bridge power down switch found on some converters. + In bridge applications, such as strain gauges and load cells, + the bridge itself consumes the majority of the current in the + system. To minimize the current consumption of the system, + the bridge can be disconnected (when it is not being used + using the bridge_switch_en attribute.