From: Piotr Haber Date: Thu, 11 Apr 2013 11:28:46 +0000 (+0200) Subject: brcmfmac: support save&restore firmware feature X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4a3da9906bbf37f6b0d44ddb753d3198e73c3c6d;p=linux-beck.git brcmfmac: support save&restore firmware feature Save & restore is an advanced power saving feature, supported only on selected devices. SR operation is almost completely transparent to the driver. Support for it is hardware and firmware dependent. Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky (Zhenhui) Lin Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 4ff2d3c52ee6..fb4ff910c8a4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -324,6 +324,9 @@ MODULE_FIRMWARE(BRCMF_SDIO_NV_NAME); */ #define BRCMF_IDLE_INTERVAL 1 +#define KSO_WAIT_US 50 +#define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US) + /* * Conversion of 802.1D priority to precedence level */ @@ -588,12 +591,14 @@ struct brcmf_sdio { bool txoff; /* Transmit flow-controlled */ struct brcmf_sdio_count sdcnt; + bool sr_enabled; /* SaveRestore enabled */ + bool sleeping; /* SDIO bus sleeping */ }; /* clkstate */ #define CLK_NONE 0 #define CLK_SDONLY 1 -#define CLK_PENDING 2 /* Not used yet */ +#define CLK_PENDING 2 #define CLK_AVAIL 3 #ifdef DEBUG @@ -665,6 +670,62 @@ w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset) return ret; } +static int +brcmf_sdbrcm_kso_control(struct brcmf_sdio *bus, bool on) +{ + u8 wr_val = 0, rd_val, cmp_val, bmask; + int err = 0; + int try_cnt = 0; + + brcmf_dbg(TRACE, "Enter\n"); + + wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); + /* 1st KSO write goes to AOS wake up core if device is asleep */ + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + wr_val, &err); + if (err) { + brcmf_err("SDIO_AOS KSO write error: %d\n", err); + return err; + } + + if (on) { + /* device WAKEUP through KSO: + * write bit 0 & read back until + * both bits 0 (kso bit) & 1 (dev on status) are set + */ + cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK | + SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK; + bmask = cmp_val; + usleep_range(2000, 3000); + } else { + /* Put device to sleep, turn off KSO */ + cmp_val = 0; + /* only check for bit0, bit1(dev on status) may not + * get cleared right away + */ + bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK; + } + + do { + /* reliable KSO bit set/clr: + * the sdiod sleep write access is synced to PMU 32khz clk + * just one write attempt may fail, + * read it back until it matches written value + */ + rd_val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + &err); + if (((rd_val & bmask) == cmp_val) && !err) + break; + brcmf_dbg(SDIO, "KSO wr/rd retry:%d (max: %d) ERR:%x\n", + try_cnt, MAX_KSO_ATTEMPTS, err); + udelay(KSO_WAIT_US); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + wr_val, &err); + } while (try_cnt++ < MAX_KSO_ATTEMPTS); + + return err; +} + #define PKT_AVAILABLE() (intstatus & I_HMB_FRAME_IND) #define HOSTINTMASK (I_HMB_SW_MASK | I_CHIPACTIVE) @@ -680,6 +741,11 @@ static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, bool pendok) clkctl = 0; + if (bus->sr_enabled) { + bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY); + return 0; + } + if (on) { /* Request HT Avail */ clkreq = @@ -856,6 +922,63 @@ static int brcmf_sdbrcm_clkctl(struct brcmf_sdio *bus, uint target, bool pendok) return 0; } +static int +brcmf_sdbrcm_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok) +{ + int err = 0; + brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(SDIO, "request %s currently %s\n", + (sleep ? "SLEEP" : "WAKE"), + (bus->sleeping ? "SLEEP" : "WAKE")); + + /* If SR is enabled control bus state with KSO */ + if (bus->sr_enabled) { + /* Done if we're already in the requested state */ + if (sleep == bus->sleeping) + goto end; + + /* Going to sleep */ + if (sleep) { + /* Don't sleep if something is pending */ + if (atomic_read(&bus->intstatus) || + atomic_read(&bus->ipend) > 0 || + (!atomic_read(&bus->fcstate) && + brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && + data_ok(bus))) + return -EBUSY; + err = brcmf_sdbrcm_kso_control(bus, false); + /* disable watchdog */ + if (!err) + brcmf_sdbrcm_wd_timer(bus, 0); + } else { + bus->idlecount = 0; + err = brcmf_sdbrcm_kso_control(bus, true); + } + if (!err) { + /* Change state */ + bus->sleeping = sleep; + brcmf_dbg(SDIO, "new state %s\n", + (sleep ? "SLEEP" : "WAKE")); + } else { + brcmf_err("error while changing bus sleep state %d\n", + err); + return err; + } + } + +end: + /* control clocks */ + if (sleep) { + if (!bus->sr_enabled) + brcmf_sdbrcm_clkctl(bus, CLK_NONE, pendok); + } else { + brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, pendok); + } + + return err; + +} + static u32 brcmf_sdbrcm_hostmail(struct brcmf_sdio *bus) { u32 intstatus = 0; @@ -1960,7 +2083,7 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev) sdio_claim_host(bus->sdiodev->func[1]); /* Enable clock for device interrupts */ - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + brcmf_sdbrcm_bus_sleep(bus, false, false); /* Disable and clear interrupts at the chip level also */ w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask)); @@ -2096,7 +2219,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) sdio_claim_host(bus->sdiodev->func[1]); /* If waiting for HTAVAIL, check status */ - if (bus->clkstate == CLK_PENDING) { + if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) { u8 clkctl, devctl = 0; #ifdef DEBUG @@ -2142,7 +2265,7 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) } /* Make sure backplane clock is on */ - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, true); + brcmf_sdbrcm_bus_sleep(bus, false, true); /* Pending interrupt indicates new device status */ if (atomic_read(&bus->ipend) > 0) { @@ -2288,8 +2411,9 @@ static void brcmf_sdbrcm_dpc(struct brcmf_sdio *bus) if ((bus->clkstate != CLK_PENDING) && bus->idletime == BRCMF_IDLE_IMMEDIATE) { bus->activity = false; + brcmf_dbg(SDIO, "idle state\n"); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_clkctl(bus, CLK_NONE, false); + brcmf_sdbrcm_bus_sleep(bus, true, false); sdio_release_host(bus->sdiodev->func[1]); } } @@ -2592,7 +2716,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) /* Make sure backplane clock is on */ sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + brcmf_sdbrcm_bus_sleep(bus, false, false); sdio_release_host(bus->sdiodev->func[1]); /* Hardware tag: 2 byte len followed by 2 byte ~len check (all LE) */ @@ -2650,6 +2774,7 @@ brcmf_sdbrcm_bus_txctl(struct device *dev, unsigned char *msg, uint msglen) bus->activity = false; sdio_claim_host(bus->sdiodev->func[1]); + brcmf_dbg(INFO, "idle\n"); brcmf_sdbrcm_clkctl(bus, CLK_NONE, true); sdio_release_host(bus->sdiodev->func[1]); } else { @@ -2686,7 +2811,7 @@ static int brcmf_sdio_readshared(struct brcmf_sdio *bus, * address of sdpcm_shared structure */ sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + brcmf_sdbrcm_bus_sleep(bus, false, false); rv = brcmf_sdbrcm_membytes(bus, false, shaddr, (u8 *)&addr_le, 4); sdio_release_host(bus->sdiodev->func[1]); @@ -3325,6 +3450,103 @@ err: return bcmerror; } +static bool brcmf_sdbrcm_sr_capable(struct brcmf_sdio *bus) +{ + u32 addr, reg; + + brcmf_dbg(TRACE, "Enter\n"); + + /* old chips with PMU version less than 17 don't support save restore */ + if (bus->ci->pmurev < 17) + return false; + + /* read PMU chipcontrol register 3*/ + addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_addr); + brcmf_sdio_regwl(bus->sdiodev, addr, 3, NULL); + addr = CORE_CC_REG(bus->ci->c_inf[0].base, chipcontrol_data); + reg = brcmf_sdio_regrl(bus->sdiodev, addr, NULL); + + return (bool)reg; +} + +static void brcmf_sdbrcm_sr_init(struct brcmf_sdio *bus) +{ + int err = 0; + u8 val; + + brcmf_dbg(TRACE, "Enter\n"); + + val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, + &err); + if (err) { + brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n"); + return; + } + + val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT; + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, + val, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n"); + return; + } + + /* Add CMD14 Support */ + brcmf_sdio_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP, + (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT | + SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT), + &err); + if (err) { + brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n"); + return; + } + + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + SBSDIO_FORCE_HT, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n"); + return; + } + + /* set flag */ + bus->sr_enabled = true; + brcmf_dbg(INFO, "SR enabled\n"); +} + +/* enable KSO bit */ +static int brcmf_sdbrcm_kso_init(struct brcmf_sdio *bus) +{ + u8 val; + int err = 0; + + brcmf_dbg(TRACE, "Enter\n"); + + /* KSO bit added in SDIO core rev 12 */ + if (bus->ci->c_inf[1].rev < 12) + return 0; + + val = brcmf_sdio_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + &err); + if (err) { + brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n"); + return err; + } + + if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) { + val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN << + SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT); + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, + val, &err); + if (err) { + brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n"); + return err; + } + } + + return 0; +} + + static bool brcmf_sdbrcm_download_firmware(struct brcmf_sdio *bus) { @@ -3423,8 +3645,13 @@ static int brcmf_sdbrcm_bus_init(struct device *dev) ret = -ENODEV; } - /* Restore previous clock setting */ - brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err); + if (brcmf_sdbrcm_sr_capable(bus)) { + brcmf_sdbrcm_sr_init(bus); + } else { + /* Restore previous clock setting */ + brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, + saveclk, &err); + } if (ret == 0) { ret = brcmf_sdio_intr_register(bus->sdiodev); @@ -3485,7 +3712,8 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) brcmf_dbg(TIMER, "Enter\n"); /* Poll period: check device if appropriate. */ - if (bus->poll && (++bus->polltick >= bus->pollrate)) { + if (!bus->sr_enabled && + bus->poll && (++bus->polltick >= bus->pollrate)) { u32 intstatus = 0; /* Reset poll tick */ @@ -3536,7 +3764,7 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->console.count -= bus->console_interval; sdio_claim_host(bus->sdiodev->func[1]); /* Make sure backplane clock is on */ - brcmf_sdbrcm_clkctl(bus, CLK_AVAIL, false); + brcmf_sdbrcm_bus_sleep(bus, false, false); if (brcmf_sdbrcm_readconsole(bus) < 0) /* stop on error */ bus->console_interval = 0; @@ -3553,8 +3781,9 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->activity = false; brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS); } else { + brcmf_dbg(SDIO, "idle\n"); sdio_claim_host(bus->sdiodev->func[1]); - brcmf_sdbrcm_clkctl(bus, CLK_NONE, false); + brcmf_sdbrcm_bus_sleep(bus, true, false); sdio_release_host(bus->sdiodev->func[1]); } } @@ -3686,6 +3915,11 @@ brcmf_sdbrcm_probe_attach(struct brcmf_sdio *bus, u32 regsva) goto fail; } + if (brcmf_sdbrcm_kso_init(bus)) { + brcmf_err("error enabling KSO\n"); + goto fail; + } + brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci, SDIO_DRIVE_STRENGTH); @@ -3755,6 +3989,10 @@ static bool brcmf_sdbrcm_probe_init(struct brcmf_sdio *bus) bus->use_rxchain = false; bus->sd_rxchain = false; + /* SR state */ + bus->sleeping = false; + bus->sr_enabled = false; + return true; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h index 0d30afd8c672..4e681ae9eb81 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h @@ -48,7 +48,11 @@ #define SBSDIO_NUM_FUNCTION 3 /* function 0 vendor specific CCCR registers */ -#define SDIO_CCCR_BRCM_SEPINT 0xf2 +#define SDIO_CCCR_BRCM_CARDCAP 0xf0 +#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02 +#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04 +#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC 0x08 +#define SDIO_CCCR_BRCM_SEPINT 0xf2 #define SDIO_SEPINT_MASK 0x01 #define SDIO_SEPINT_OE 0x02 @@ -97,9 +101,23 @@ #define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B /* Read Frame Byte Count High */ #define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C +/* MesBusyCtl (rev 11) */ +#define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D +/* Sdio Core Rev 12 */ +#define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E +#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1 +#define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0 +#define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2 +#define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1 +#define SBSDIO_FUNC1_SLEEPCSR 0x1001F +#define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1 +#define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0 +#define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1 +#define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2 +#define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1 #define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */ -#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */ +#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */ /* function 1 OCP space */ diff --git a/drivers/net/wireless/brcm80211/include/chipcommon.h b/drivers/net/wireless/brcm80211/include/chipcommon.h index f96834a7c055..d242333b7559 100644 --- a/drivers/net/wireless/brcm80211/include/chipcommon.h +++ b/drivers/net/wireless/brcm80211/include/chipcommon.h @@ -205,7 +205,7 @@ struct chipcregs { u32 res_req_timer_sel; u32 res_req_timer; u32 res_req_mask; - u32 PAD; + u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */ u32 chipcontrol_addr; /* 0x650 */ u32 chipcontrol_data; /* 0x654 */ u32 regcontrol_addr; @@ -214,7 +214,11 @@ struct chipcregs { u32 pllcontrol_data; u32 pmustrapopt; /* 0x668, corerev >= 28 */ u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */ - u32 PAD[100]; + u32 retention_ctl; /* 0x670, pmurev >= 15 */ + u32 PAD[3]; + u32 retention_grpidx; /* 0x680 */ + u32 retention_grpctl; /* 0x684 */ + u32 PAD[94]; u16 sromotp[768]; }; @@ -276,6 +280,12 @@ struct chipcregs { #define PCAP5_VC_SHIFT 22 #define PCAP5_CC_MASK 0xf8000000 #define PCAP5_CC_SHIFT 27 +/* pmucapabilites_ext PMU rev >= 15 */ +#define PCAPEXT_SR_SUPPORTED_MASK (1 << 1) +/* retention_ctl PMU rev >= 15 */ +#define PMU_RCTL_MACPHY_DISABLE_MASK (1 << 26) +#define PMU_RCTL_LOGIC_DISABLE_MASK (1 << 27) + /* * Maximum delay for the PMU state transition in us.