From: Greg Kroah-Hartman Date: Sun, 10 May 2015 12:54:38 +0000 (+0200) Subject: staging: remove i2o subsystem X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4a72a7af462d;p=linux-beck.git staging: remove i2o subsystem This subsystem isn't used anymore, and the hardware isn't around. It's been in staging for a while, and it's time for it to now be removed. Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index bfacf69f68f4..c204ab2693c1 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -108,8 +108,6 @@ source "drivers/staging/clocking-wizard/Kconfig" source "drivers/staging/fbtft/Kconfig" -source "drivers/staging/i2o/Kconfig" - source "drivers/staging/fsl-mc/Kconfig" endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index a12221f086c2..9b9151758bbd 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -46,5 +46,4 @@ obj-$(CONFIG_CRYPTO_SKEIN) += skein/ obj-$(CONFIG_UNISYSSPAR) += unisys/ obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD) += clocking-wizard/ obj-$(CONFIG_FB_TFT) += fbtft/ -obj-$(CONFIG_I2O) += i2o/ obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/ diff --git a/drivers/staging/i2o/Kconfig b/drivers/staging/i2o/Kconfig deleted file mode 100644 index 286c53f4b13d..000000000000 --- a/drivers/staging/i2o/Kconfig +++ /dev/null @@ -1,120 +0,0 @@ -menuconfig I2O - tristate "I2O device support" - depends on PCI - ---help--- - The Intelligent Input/Output (I2O) architecture allows hardware - drivers to be split into two parts: an operating system specific - module called the OSM and an hardware specific module called the - HDM. The OSM can talk to a whole range of HDM's, and ideally the - HDM's are not OS dependent. This allows for the same HDM driver to - be used under different operating systems if the relevant OSM is in - place. In order for this to work, you need to have an I2O interface - adapter card in your computer. This card contains a special I/O - processor (IOP), thus allowing high speeds since the CPU does not - have to deal with I/O. - - If you say Y here, you will get a choice of interface adapter - drivers and OSM's with the following questions. - - To compile this support as a module, choose M here: the - modules will be called i2o_core. - - If unsure, say N. - -if I2O - -config I2O_LCT_NOTIFY_ON_CHANGES - bool "Enable LCT notification" - default y - ---help--- - Only say N here if you have a I2O controller from SUN. The SUN - firmware doesn't support LCT notification on changes. If this option - is enabled on such a controller the driver will hang up in a endless - loop. On all other controllers say Y. - - If unsure, say Y. - -config I2O_EXT_ADAPTEC - bool "Enable Adaptec extensions" - default y - ---help--- - Say Y for support of raidutils for Adaptec I2O controllers. You also - have to say Y to "I2O Configuration support", "I2O SCSI OSM" below - and to "SCSI generic support" under "SCSI device configuration". - -config I2O_EXT_ADAPTEC_DMA64 - bool "Enable 64-bit DMA" - depends on I2O_EXT_ADAPTEC && ( 64BIT || HIGHMEM64G ) - default y - ---help--- - Say Y for support of 64-bit DMA transfer mode on Adaptec I2O - controllers. - Note: You need at least firmware version 3709. - -config I2O_CONFIG - tristate "I2O Configuration support" - depends on VIRT_TO_BUS - ---help--- - Say Y for support of the configuration interface for the I2O adapters. - If you have a RAID controller from Adaptec and you want to use the - raidutils to manage your RAID array, you have to say Y here. - - To compile this support as a module, choose M here: the - module will be called i2o_config. - - Note: If you want to use the new API you have to download the - i2o_config patch from http://i2o.shadowconnect.com/ - -config I2O_CONFIG_OLD_IOCTL - bool "Enable ioctls (OBSOLETE)" - depends on I2O_CONFIG - default y - ---help--- - Enables old ioctls. - -config I2O_BUS - tristate "I2O Bus Adapter OSM" - ---help--- - Include support for the I2O Bus Adapter OSM. The Bus Adapter OSM - provides access to the busses on the I2O controller. The main purpose - is to rescan the bus to find new devices. - - To compile this support as a module, choose M here: the - module will be called i2o_bus. - -config I2O_BLOCK - tristate "I2O Block OSM" - depends on BLOCK - ---help--- - Include support for the I2O Block OSM. The Block OSM presents disk - and other structured block devices to the operating system. If you - are using an RAID controller, you could access the array only by - the Block OSM driver. But it is possible to access the single disks - by the SCSI OSM driver, for example to monitor the disks. - - To compile this support as a module, choose M here: the - module will be called i2o_block. - -config I2O_SCSI - tristate "I2O SCSI OSM" - depends on SCSI - ---help--- - Allows direct SCSI access to SCSI devices on a SCSI or FibreChannel - I2O controller. You can use both the SCSI and Block OSM together if - you wish. To access a RAID array, you must use the Block OSM driver. - But you could use the SCSI OSM driver to monitor the single disks. - - To compile this support as a module, choose M here: the - module will be called i2o_scsi. - -config I2O_PROC - tristate "I2O /proc support" - ---help--- - If you say Y here and to "/proc file system support", you will be - able to read I2O related information from the virtual directory - /proc/i2o. - - To compile this support as a module, choose M here: the - module will be called i2o_proc. - -endif # I2O diff --git a/drivers/staging/i2o/Makefile b/drivers/staging/i2o/Makefile deleted file mode 100644 index b0982dacfd0a..000000000000 --- a/drivers/staging/i2o/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# Makefile for the kernel I2O OSM. -# -# Note : at this point, these files are compiled on all systems. -# In the future, some of these should be built conditionally. -# - -i2o_core-y += iop.o driver.o device.o debug.o pci.o exec-osm.o memory.o -i2o_bus-y += bus-osm.o -i2o_config-y += config-osm.o -obj-$(CONFIG_I2O) += i2o_core.o -obj-$(CONFIG_I2O_CONFIG)+= i2o_config.o -obj-$(CONFIG_I2O_BUS) += i2o_bus.o -obj-$(CONFIG_I2O_BLOCK) += i2o_block.o -obj-$(CONFIG_I2O_SCSI) += i2o_scsi.o -obj-$(CONFIG_I2O_PROC) += i2o_proc.o diff --git a/drivers/staging/i2o/README b/drivers/staging/i2o/README deleted file mode 100644 index f072a8eb3041..000000000000 --- a/drivers/staging/i2o/README +++ /dev/null @@ -1,98 +0,0 @@ - - Linux I2O Support (c) Copyright 1999 Red Hat Software - and others. - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License - as published by the Free Software Foundation; either version - 2 of the License, or (at your option) any later version. - -AUTHORS (so far) - -Alan Cox, Building Number Three Ltd. - Core code, SCSI and Block OSMs - -Steve Ralston, LSI Logic Corp. - Debugging SCSI and Block OSM - -Deepak Saxena, Intel Corp. - Various core/block extensions - /proc interface, bug fixes - Ioctl interfaces for control - Debugging LAN OSM - -Philip Rumpf - Fixed assorted dumb SMP locking bugs - -Juha Sievanen, University of Helsinki Finland - LAN OSM code - /proc interface to LAN class - Bug fixes - Core code extensions - -Auvo Häkkinen, University of Helsinki Finland - LAN OSM code - /Proc interface to LAN class - Bug fixes - Core code extensions - -Taneli Vähäkangas, University of Helsinki Finland - Fixes to i2o_config - -CREDITS - - This work was made possible by - -Red Hat Software - Funding for the Building #3 part of the project - -Symbios Logic (Now LSI) - Host adapters, hints, known to work platforms when I hit - compatibility problems - -BoxHill Corporation - Loan of initial FibreChannel disk array used for development work. - -European Commission - Funding the work done by the University of Helsinki - -SysKonnect - Loan of FDDI and Gigabit Ethernet cards - -ASUSTeK - Loan of I2O motherboard - -STATUS: - -o The core setup works within limits. -o The scsi layer seems to almost work. - I'm still chasing down the hang bug. -o The block OSM is mostly functional -o LAN OSM works with FDDI and Ethernet cards. - -TO DO: - -General: -o Provide hidden address space if asked -o Long term message flow control -o PCI IOP's without interrupts are not supported yet -o Push FAIL handling into the core -o DDM control interfaces for module load etc -o Add I2O 2.0 support (Deffered to 2.5 kernel) - -Block: -o Multiple major numbers -o Read ahead and cache handling stuff. Talk to Ingo and people -o Power management -o Finish Media changers - -SCSI: -o Find the right way to associate drives/luns/busses - -Lan: -o Performance tuning -o Test Fibre Channel code - -Tape: -o Anyone seen anything implementing this ? - (D.S: Will attempt to do so if spare cycles permit) diff --git a/drivers/staging/i2o/README.ioctl b/drivers/staging/i2o/README.ioctl deleted file mode 100644 index 4a7d2ebdfc97..000000000000 --- a/drivers/staging/i2o/README.ioctl +++ /dev/null @@ -1,394 +0,0 @@ - -Linux I2O User Space Interface -rev 0.3 - 04/20/99 - -============================================================================= -Originally written by Deepak Saxena(deepak@plexity.net) -Currently maintained by Deepak Saxena(deepak@plexity.net) -============================================================================= - -I. Introduction - -The Linux I2O subsystem provides a set of ioctl() commands that can be -utilized by user space applications to communicate with IOPs and devices -on individual IOPs. This document defines the specific ioctl() commands -that are available to the user and provides examples of their uses. - -This document assumes the reader is familiar with or has access to the -I2O specification as no I2O message parameters are outlined. For information -on the specification, see http://www.i2osig.org - -This document and the I2O user space interface are currently maintained -by Deepak Saxena. Please send all comments, errata, and bug fixes to -deepak@csociety.purdue.edu - -II. IOP Access - -Access to the I2O subsystem is provided through the device file named -/dev/i2o/ctl. This file is a character file with major number 10 and minor -number 166. It can be created through the following command: - - mknod /dev/i2o/ctl c 10 166 - -III. Determining the IOP Count - - SYNOPSIS - - ioctl(fd, I2OGETIOPS, int *count); - - u8 count[MAX_I2O_CONTROLLERS]; - - DESCRIPTION - - This function returns the system's active IOP table. count should - point to a buffer containing MAX_I2O_CONTROLLERS entries. Upon - returning, each entry will contain a non-zero value if the given - IOP unit is active, and NULL if it is inactive or non-existent. - - RETURN VALUE. - - Returns 0 if no errors occur, and -1 otherwise. If an error occurs, - errno is set appropriately: - - EFAULT Invalid user space pointer was passed - -IV. Getting Hardware Resource Table - - SYNOPSIS - - ioctl(fd, I2OHRTGET, struct i2o_cmd_hrt *hrt); - - struct i2o_cmd_hrtlct - { - u32 iop; /* IOP unit number */ - void *resbuf; /* Buffer for result */ - u32 *reslen; /* Buffer length in bytes */ - }; - - DESCRIPTION - - This function returns the Hardware Resource Table of the IOP specified - by hrt->iop in the buffer pointed to by hrt->resbuf. The actual size of - the data is written into *(hrt->reslen). - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(hrt->reslen) - -V. Getting Logical Configuration Table - - SYNOPSIS - - ioctl(fd, I2OLCTGET, struct i2o_cmd_lct *lct); - - struct i2o_cmd_hrtlct - { - u32 iop; /* IOP unit number */ - void *resbuf; /* Buffer for result */ - u32 *reslen; /* Buffer length in bytes */ - }; - - DESCRIPTION - - This function returns the Logical Configuration Table of the IOP specified - by lct->iop in the buffer pointed to by lct->resbuf. The actual size of - the data is written into *(lct->reslen). - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(lct->reslen) - -VI. Setting Parameters - - SYNOPSIS - - ioctl(fd, I2OPARMSET, struct i2o_parm_setget *ops); - - struct i2o_cmd_psetget - { - u32 iop; /* IOP unit number */ - u32 tid; /* Target device TID */ - void *opbuf; /* Operation List buffer */ - u32 oplen; /* Operation List buffer length in bytes */ - void *resbuf; /* Result List buffer */ - u32 *reslen; /* Result List buffer length in bytes */ - }; - - DESCRIPTION - - This function posts a UtilParamsSet message to the device identified - by ops->iop and ops->tid. The operation list for the message is - sent through the ops->opbuf buffer, and the result list is written - into the buffer pointed to by ops->resbuf. The number of bytes - written is placed into *(ops->reslen). - - RETURNS - - The return value is the size in bytes of the data written into - ops->resbuf if no errors occur. If an error occurs, -1 is returned - and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(ops->reslen) - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - - A return value of 0 does not mean that the value was actually - changed properly on the IOP. The user should check the result - list to determine the specific status of the transaction. - -VII. Getting Parameters - - SYNOPSIS - - ioctl(fd, I2OPARMGET, struct i2o_parm_setget *ops); - - struct i2o_parm_setget - { - u32 iop; /* IOP unit number */ - u32 tid; /* Target device TID */ - void *opbuf; /* Operation List buffer */ - u32 oplen; /* Operation List buffer length in bytes */ - void *resbuf; /* Result List buffer */ - u32 *reslen; /* Result List buffer length in bytes */ - }; - - DESCRIPTION - - This function posts a UtilParamsGet message to the device identified - by ops->iop and ops->tid. The operation list for the message is - sent through the ops->opbuf buffer, and the result list is written - into the buffer pointed to by ops->resbuf. The actual size of data - written is placed into *(ops->reslen). - - RETURNS - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(ops->reslen) - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - - A return value of 0 does not mean that the value was actually - properly retrieved. The user should check the result list - to determine the specific status of the transaction. - -VIII. Downloading Software - - SYNOPSIS - - ioctl(fd, I2OSWDL, struct i2o_sw_xfer *sw); - - struct i2o_sw_xfer - { - u32 iop; /* IOP unit number */ - u8 flags; /* DownloadFlags field */ - u8 sw_type; /* Software type */ - u32 sw_id; /* Software ID */ - void *buf; /* Pointer to software buffer */ - u32 *swlen; /* Length of software buffer */ - u32 *maxfrag; /* Number of fragments */ - u32 *curfrag; /* Current fragment number */ - }; - - DESCRIPTION - - This function downloads a software fragment pointed by sw->buf - to the iop identified by sw->iop. The DownloadFlags, SwID, SwType - and SwSize fields of the ExecSwDownload message are filled in with - the values of sw->flags, sw->sw_id, sw->sw_type and *(sw->swlen). - - The fragments _must_ be sent in order and be 8K in size. The last - fragment _may_ be shorter, however. The kernel will compute its - size based on information in the sw->swlen field. - - Please note that SW transfers can take a long time. - - RETURNS - - This function returns 0 no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -IX. Uploading Software - - SYNOPSIS - - ioctl(fd, I2OSWUL, struct i2o_sw_xfer *sw); - - struct i2o_sw_xfer - { - u32 iop; /* IOP unit number */ - u8 flags; /* UploadFlags */ - u8 sw_type; /* Software type */ - u32 sw_id; /* Software ID */ - void *buf; /* Pointer to software buffer */ - u32 *swlen; /* Length of software buffer */ - u32 *maxfrag; /* Number of fragments */ - u32 *curfrag; /* Current fragment number */ - }; - - DESCRIPTION - - This function uploads a software fragment from the IOP identified - by sw->iop, sw->sw_type, sw->sw_id and optionally sw->swlen fields. - The UploadFlags, SwID, SwType and SwSize fields of the ExecSwUpload - message are filled in with the values of sw->flags, sw->sw_id, - sw->sw_type and *(sw->swlen). - - The fragments _must_ be requested in order and be 8K in size. The - user is responsible for allocating memory pointed by sw->buf. The - last fragment _may_ be shorter. - - Please note that SW transfers can take a long time. - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -X. Removing Software - - SYNOPSIS - - ioctl(fd, I2OSWDEL, struct i2o_sw_xfer *sw); - - struct i2o_sw_xfer - { - u32 iop; /* IOP unit number */ - u8 flags; /* RemoveFlags */ - u8 sw_type; /* Software type */ - u32 sw_id; /* Software ID */ - void *buf; /* Unused */ - u32 *swlen; /* Length of the software data */ - u32 *maxfrag; /* Unused */ - u32 *curfrag; /* Unused */ - }; - - DESCRIPTION - - This function removes software from the IOP identified by sw->iop. - The RemoveFlags, SwID, SwType and SwSize fields of the ExecSwRemove message - are filled in with the values of sw->flags, sw->sw_id, sw->sw_type and - *(sw->swlen). Give zero in *(sw->len) if the value is unknown. IOP uses - *(sw->swlen) value to verify correct identication of the module to remove. - The actual size of the module is written into *(sw->swlen). - - RETURNS - - This function returns 0 if no errors occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -X. Validating Configuration - - SYNOPSIS - - ioctl(fd, I2OVALIDATE, int *iop); - u32 iop; - - DESCRIPTION - - This function posts an ExecConfigValidate message to the controller - identified by iop. This message indicates that the current - configuration is accepted. The iop changes the status of suspect drivers - to valid and may delete old drivers from its store. - - RETURNS - - This function returns 0 if no erro occur. If an error occurs, -1 is - returned and errno is set appropriately: - - ETIMEDOUT Timeout waiting for reply message - ENXIO Invalid IOP number - -XI. Configuration Dialog - - SYNOPSIS - - ioctl(fd, I2OHTML, struct i2o_html *htquery); - struct i2o_html - { - u32 iop; /* IOP unit number */ - u32 tid; /* Target device ID */ - u32 page; /* HTML page */ - void *resbuf; /* Buffer for reply HTML page */ - u32 *reslen; /* Length in bytes of reply buffer */ - void *qbuf; /* Pointer to HTTP query string */ - u32 qlen; /* Length in bytes of query string buffer */ - }; - - DESCRIPTION - - This function posts an UtilConfigDialog message to the device identified - by htquery->iop and htquery->tid. The requested HTML page number is - provided by the htquery->page field, and the resultant data is stored - in the buffer pointed to by htquery->resbuf. If there is an HTTP query - string that is to be sent to the device, it should be sent in the buffer - pointed to by htquery->qbuf. If there is no query string, this field - should be set to NULL. The actual size of the reply received is written - into *(htquery->reslen). - - RETURNS - - This function returns 0 if no error occur. If an error occurs, -1 - is returned and errno is set appropriately: - - EFAULT Invalid user space pointer was passed - ENXIO Invalid IOP number - ENOBUFS Buffer not large enough. If this occurs, the required - buffer length is written into *(ops->reslen) - ETIMEDOUT Timeout waiting for reply message - ENOMEM Kernel memory allocation error - -XII. Events - - In the process of determining this. Current idea is to have use - the select() interface to allow user apps to periodically poll - the /dev/i2o/ctl device for events. When select() notifies the user - that an event is available, the user would call read() to retrieve - a list of all the events that are pending for the specific device. - -============================================================================= -Revision History -============================================================================= - -Rev 0.1 - 04/01/99 -- Initial revision - -Rev 0.2 - 04/06/99 -- Changed return values to match UNIX ioctl() standard. Only return values - are 0 and -1. All errors are reported through errno. -- Added summary of proposed possible event interfaces - -Rev 0.3 - 04/20/99 -- Changed all ioctls() to use pointers to user data instead of actual data -- Updated error values to match the code diff --git a/drivers/staging/i2o/bus-osm.c b/drivers/staging/i2o/bus-osm.c deleted file mode 100644 index 43e357eeeb67..000000000000 --- a/drivers/staging/i2o/bus-osm.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Bus Adapter OSM - * - * Copyright (C) 2005 Markus Lidel - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Fixes/additions: - * Markus Lidel - * initial version. - */ - -#include -#include "i2o.h" - -#define OSM_NAME "bus-osm" -#define OSM_VERSION "1.317" -#define OSM_DESCRIPTION "I2O Bus Adapter OSM" - -static struct i2o_driver i2o_bus_driver; - -/* Bus OSM class handling definition */ -static struct i2o_class_id i2o_bus_class_id[] = { - {I2O_CLASS_BUS_ADAPTER}, - {I2O_CLASS_END} -}; - -/** - * i2o_bus_scan - Scan the bus for new devices - * @dev: I2O device of the bus, which should be scanned - * - * Scans the bus dev for new / removed devices. After the scan a new LCT - * will be fetched automatically. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_bus_scan(struct i2o_device *dev) -{ - struct i2o_message *msg; - - msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return -ETIMEDOUT; - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_BUS_SCAN << 24 | HOST_TID << 12 | dev->lct_data. - tid); - - return i2o_msg_post_wait(dev->iop, msg, 60); -}; - -/** - * i2o_bus_store_scan - Scan the I2O Bus Adapter - * @d: device which should be scanned - * @attr: device_attribute - * @buf: output buffer - * @count: buffer size - * - * Returns count. - */ -static ssize_t i2o_bus_store_scan(struct device *d, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct i2o_device *i2o_dev = to_i2o_device(d); - int rc; - - rc = i2o_bus_scan(i2o_dev); - if (rc) - osm_warn("bus scan failed %d\n", rc); - - return count; -} - -/* Bus Adapter OSM device attributes */ -static DEVICE_ATTR(scan, S_IWUSR, NULL, i2o_bus_store_scan); - -/** - * i2o_bus_probe - verify if dev is a I2O Bus Adapter device and install it - * @dev: device to verify if it is a I2O Bus Adapter device - * - * Because we want all Bus Adapters always return 0. - * Except when we fail. Then we are sad. - * - * Returns 0, except when we fail to excel. - */ -static int i2o_bus_probe(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(get_device(dev)); - int rc; - - rc = device_create_file(dev, &dev_attr_scan); - if (rc) - goto err_out; - - osm_info("device added (TID: %03x)\n", i2o_dev->lct_data.tid); - - return 0; - -err_out: - put_device(dev); - return rc; -}; - -/** - * i2o_bus_remove - remove the I2O Bus Adapter device from the system again - * @dev: I2O Bus Adapter device which should be removed - * - * Always returns 0. - */ -static int i2o_bus_remove(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - - device_remove_file(dev, &dev_attr_scan); - - put_device(dev); - - osm_info("device removed (TID: %03x)\n", i2o_dev->lct_data.tid); - - return 0; -}; - -/* Bus Adapter OSM driver struct */ -static struct i2o_driver i2o_bus_driver = { - .name = OSM_NAME, - .classes = i2o_bus_class_id, - .driver = { - .probe = i2o_bus_probe, - .remove = i2o_bus_remove, - }, -}; - -/** - * i2o_bus_init - Bus Adapter OSM initialization function - * - * Only register the Bus Adapter OSM in the I2O core. - * - * Returns 0 on success or negative error code on failure. - */ -static int __init i2o_bus_init(void) -{ - int rc; - - printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - - /* Register Bus Adapter OSM into I2O core */ - rc = i2o_driver_register(&i2o_bus_driver); - if (rc) { - osm_err("Could not register Bus Adapter OSM\n"); - return rc; - } - - return 0; -}; - -/** - * i2o_bus_exit - Bus Adapter OSM exit function - * - * Unregisters Bus Adapter OSM from I2O core. - */ -static void __exit i2o_bus_exit(void) -{ - i2o_driver_unregister(&i2o_bus_driver); -}; - -MODULE_AUTHOR("Markus Lidel "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION(OSM_DESCRIPTION); -MODULE_VERSION(OSM_VERSION); - -module_init(i2o_bus_init); -module_exit(i2o_bus_exit); diff --git a/drivers/staging/i2o/config-osm.c b/drivers/staging/i2o/config-osm.c deleted file mode 100644 index 45091ac66154..000000000000 --- a/drivers/staging/i2o/config-osm.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Configuration OSM - * - * Copyright (C) 2005 Markus Lidel - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Fixes/additions: - * Markus Lidel - * initial version. - */ - -#include -#include "i2o.h" -#include -#include -#include - -#include - -#define OSM_NAME "config-osm" -#define OSM_VERSION "1.323" -#define OSM_DESCRIPTION "I2O Configuration OSM" - -/* access mode user rw */ -#define S_IWRSR (S_IRUSR | S_IWUSR) - -static struct i2o_driver i2o_config_driver; - -/* Config OSM driver struct */ -static struct i2o_driver i2o_config_driver = { - .name = OSM_NAME, -}; - -#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL -#include "i2o_config.c" -#endif - -/** - * i2o_config_init - Configuration OSM initialization function - * - * Registers Configuration OSM in the I2O core and if old ioctl's are - * compiled in initialize them. - * - * Returns 0 on success or negative error code on failure. - */ -static int __init i2o_config_init(void) -{ - printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - - if (i2o_driver_register(&i2o_config_driver)) { - osm_err("handler register failed.\n"); - return -EBUSY; - } -#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL - if (i2o_config_old_init()) { - osm_err("old config handler initialization failed\n"); - i2o_driver_unregister(&i2o_config_driver); - return -EBUSY; - } -#endif - - return 0; -} - -/** - * i2o_config_exit - Configuration OSM exit function - * - * If old ioctl's are compiled in exit remove them and unregisters - * Configuration OSM from I2O core. - */ -static void i2o_config_exit(void) -{ -#ifdef CONFIG_I2O_CONFIG_OLD_IOCTL - i2o_config_old_exit(); -#endif - - i2o_driver_unregister(&i2o_config_driver); -} - -MODULE_AUTHOR("Markus Lidel "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION(OSM_DESCRIPTION); -MODULE_VERSION(OSM_VERSION); - -module_init(i2o_config_init); -module_exit(i2o_config_exit); diff --git a/drivers/staging/i2o/core.h b/drivers/staging/i2o/core.h deleted file mode 100644 index 91614f11f89a..000000000000 --- a/drivers/staging/i2o/core.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * I2O core internal declarations - * - * Copyright (C) 2005 Markus Lidel - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Fixes/additions: - * Markus Lidel - * initial version. - */ - -/* Exec-OSM */ -extern struct i2o_driver i2o_exec_driver; -extern int i2o_exec_lct_get(struct i2o_controller *); - -extern int __init i2o_exec_init(void); -extern void i2o_exec_exit(void); - -/* driver */ -extern struct bus_type i2o_bus_type; - -extern int i2o_driver_dispatch(struct i2o_controller *, u32); - -extern int __init i2o_driver_init(void); -extern void i2o_driver_exit(void); - -/* PCI */ -extern int __init i2o_pci_init(void); -extern void __exit i2o_pci_exit(void); - -/* device */ -extern const struct attribute_group *i2o_device_groups[]; - -extern void i2o_device_remove(struct i2o_device *); -extern int i2o_device_parse_lct(struct i2o_controller *); - -int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist, - int oplen, void *reslist, int reslen); - -/* IOP */ -extern struct i2o_controller *i2o_iop_alloc(void); - -/** - * i2o_iop_free - Free the i2o_controller struct - * @c: I2O controller to free - */ -static inline void i2o_iop_free(struct i2o_controller *c) -{ - i2o_pool_free(&c->in_msg); - kfree(c); -} - -extern int i2o_iop_add(struct i2o_controller *); -extern void i2o_iop_remove(struct i2o_controller *); - -/* control registers relative to c->base */ -#define I2O_IRQ_STATUS 0x30 -#define I2O_IRQ_MASK 0x34 -#define I2O_IN_PORT 0x40 -#define I2O_OUT_PORT 0x44 - -/* Motorola/Freescale specific register offset */ -#define I2O_MOTOROLA_PORT_OFFSET 0x10400 - -#define I2O_IRQ_OUTBOUND_POST 0x00000008 diff --git a/drivers/staging/i2o/debug.c b/drivers/staging/i2o/debug.c deleted file mode 100644 index 12b783b2a86c..000000000000 --- a/drivers/staging/i2o/debug.c +++ /dev/null @@ -1,473 +0,0 @@ -#include -#include -#include -#include "i2o.h" - -static void i2o_report_util_cmd(u8 cmd); -static void i2o_report_exec_cmd(u8 cmd); -static void i2o_report_fail_status(u8 req_status, u32 *msg); -static void i2o_report_common_status(u8 req_status); -static void i2o_report_common_dsc(u16 detailed_status); - -/* - * Used for error reporting/debugging purposes. - * Report Cmd name, Request status, Detailed Status. - */ -void i2o_report_status(const char *severity, const char *str, - struct i2o_message *m) -{ - u32 *msg = (u32 *) m; - u8 cmd = (msg[1] >> 24) & 0xFF; - u8 req_status = (msg[4] >> 24) & 0xFF; - u16 detailed_status = msg[4] & 0xFFFF; - - if (cmd == I2O_CMD_UTIL_EVT_REGISTER) - return; /* No status in this reply */ - - printk("%s%s: ", severity, str); - - if (cmd < 0x1F) // Utility cmd - i2o_report_util_cmd(cmd); - - else if (cmd >= 0xA0 && cmd <= 0xEF) // Executive cmd - i2o_report_exec_cmd(cmd); - else - printk("Cmd = %0#2x, ", cmd); // Other cmds - - if (msg[0] & MSG_FAIL) { - i2o_report_fail_status(req_status, msg); - return; - } - - i2o_report_common_status(req_status); - - if (cmd < 0x1F || (cmd >= 0xA0 && cmd <= 0xEF)) - i2o_report_common_dsc(detailed_status); - else - printk(" / DetailedStatus = %0#4x.\n", - detailed_status); -} - -/* Used to dump a message to syslog during debugging */ -void i2o_dump_message(struct i2o_message *m) -{ -#ifdef DEBUG - u32 *msg = (u32 *) m; - int i; - - printk(KERN_INFO "Dumping I2O message size %d @ %p\n", - msg[0] >> 16 & 0xffff, msg); - for (i = 0; i < ((msg[0] >> 16) & 0xffff); i++) - printk(KERN_INFO " msg[%d] = %0#10x\n", i, msg[i]); -#endif -} - -/* - * Used for error reporting/debugging purposes. - * Following fail status are common to all classes. - * The preserved message must be handled in the reply handler. - */ -static void i2o_report_fail_status(u8 req_status, u32 *msg) -{ - static char *FAIL_STATUS[] = { - "0x80", /* not used */ - "SERVICE_SUSPENDED", /* 0x81 */ - "SERVICE_TERMINATED", /* 0x82 */ - "CONGESTION", - "FAILURE", - "STATE_ERROR", - "TIME_OUT", - "ROUTING_FAILURE", - "INVALID_VERSION", - "INVALID_OFFSET", - "INVALID_MSG_FLAGS", - "FRAME_TOO_SMALL", - "FRAME_TOO_LARGE", - "INVALID_TARGET_ID", - "INVALID_INITIATOR_ID", - "INVALID_INITIATOR_CONTEX", /* 0x8F */ - "UNKNOWN_FAILURE" /* 0xFF */ - }; - - if (req_status == I2O_FSC_TRANSPORT_UNKNOWN_FAILURE) - printk("TRANSPORT_UNKNOWN_FAILURE (%0#2x).\n", - req_status); - else - printk("TRANSPORT_%s.\n", - FAIL_STATUS[req_status & 0x0F]); - - /* Dump some details */ - - printk(KERN_ERR " InitiatorId = %d, TargetId = %d\n", - (msg[1] >> 12) & 0xFFF, msg[1] & 0xFFF); - printk(KERN_ERR " LowestVersion = 0x%02X, HighestVersion = 0x%02X\n", - (msg[4] >> 8) & 0xFF, msg[4] & 0xFF); - printk(KERN_ERR " FailingHostUnit = 0x%04X, FailingIOP = 0x%03X\n", - msg[5] >> 16, msg[5] & 0xFFF); - - printk(KERN_ERR " Severity: 0x%02X\n", (msg[4] >> 16) & 0xFF); - if (msg[4] & (1 << 16)) - printk(KERN_DEBUG "(FormatError), " - "this msg can never be delivered/processed.\n"); - if (msg[4] & (1 << 17)) - printk(KERN_DEBUG "(PathError), " - "this msg can no longer be delivered/processed.\n"); - if (msg[4] & (1 << 18)) - printk(KERN_DEBUG "(PathState), " - "the system state does not allow delivery.\n"); - if (msg[4] & (1 << 19)) - printk(KERN_DEBUG - "(Congestion), resources temporarily not available;" - "do not retry immediately.\n"); -} - -/* - * Used for error reporting/debugging purposes. - * Following reply status are common to all classes. - */ -static void i2o_report_common_status(u8 req_status) -{ - static char *REPLY_STATUS[] = { - "SUCCESS", - "ABORT_DIRTY", - "ABORT_NO_DATA_TRANSFER", - "ABORT_PARTIAL_TRANSFER", - "ERROR_DIRTY", - "ERROR_NO_DATA_TRANSFER", - "ERROR_PARTIAL_TRANSFER", - "PROCESS_ABORT_DIRTY", - "PROCESS_ABORT_NO_DATA_TRANSFER", - "PROCESS_ABORT_PARTIAL_TRANSFER", - "TRANSACTION_ERROR", - "PROGRESS_REPORT" - }; - - if (req_status >= ARRAY_SIZE(REPLY_STATUS)) - printk("RequestStatus = %0#2x", req_status); - else - printk("%s", REPLY_STATUS[req_status]); -} - -/* - * Used for error reporting/debugging purposes. - * Following detailed status are valid for executive class, - * utility class, DDM class and for transaction error replies. - */ -static void i2o_report_common_dsc(u16 detailed_status) -{ - static char *COMMON_DSC[] = { - "SUCCESS", - "0x01", // not used - "BAD_KEY", - "TCL_ERROR", - "REPLY_BUFFER_FULL", - "NO_SUCH_PAGE", - "INSUFFICIENT_RESOURCE_SOFT", - "INSUFFICIENT_RESOURCE_HARD", - "0x08", // not used - "CHAIN_BUFFER_TOO_LARGE", - "UNSUPPORTED_FUNCTION", - "DEVICE_LOCKED", - "DEVICE_RESET", - "INAPPROPRIATE_FUNCTION", - "INVALID_INITIATOR_ADDRESS", - "INVALID_MESSAGE_FLAGS", - "INVALID_OFFSET", - "INVALID_PARAMETER", - "INVALID_REQUEST", - "INVALID_TARGET_ADDRESS", - "MESSAGE_TOO_LARGE", - "MESSAGE_TOO_SMALL", - "MISSING_PARAMETER", - "TIMEOUT", - "UNKNOWN_ERROR", - "UNKNOWN_FUNCTION", - "UNSUPPORTED_VERSION", - "DEVICE_BUSY", - "DEVICE_NOT_AVAILABLE" - }; - - if (detailed_status > I2O_DSC_DEVICE_NOT_AVAILABLE) - printk(" / DetailedStatus = %0#4x.\n", - detailed_status); - else - printk(" / %s.\n", COMMON_DSC[detailed_status]); -} - -/* - * Used for error reporting/debugging purposes - */ -static void i2o_report_util_cmd(u8 cmd) -{ - switch (cmd) { - case I2O_CMD_UTIL_NOP: - printk("UTIL_NOP, "); - break; - case I2O_CMD_UTIL_ABORT: - printk("UTIL_ABORT, "); - break; - case I2O_CMD_UTIL_CLAIM: - printk("UTIL_CLAIM, "); - break; - case I2O_CMD_UTIL_RELEASE: - printk("UTIL_CLAIM_RELEASE, "); - break; - case I2O_CMD_UTIL_CONFIG_DIALOG: - printk("UTIL_CONFIG_DIALOG, "); - break; - case I2O_CMD_UTIL_DEVICE_RESERVE: - printk("UTIL_DEVICE_RESERVE, "); - break; - case I2O_CMD_UTIL_DEVICE_RELEASE: - printk("UTIL_DEVICE_RELEASE, "); - break; - case I2O_CMD_UTIL_EVT_ACK: - printk("UTIL_EVENT_ACKNOWLEDGE, "); - break; - case I2O_CMD_UTIL_EVT_REGISTER: - printk("UTIL_EVENT_REGISTER, "); - break; - case I2O_CMD_UTIL_LOCK: - printk("UTIL_LOCK, "); - break; - case I2O_CMD_UTIL_LOCK_RELEASE: - printk("UTIL_LOCK_RELEASE, "); - break; - case I2O_CMD_UTIL_PARAMS_GET: - printk("UTIL_PARAMS_GET, "); - break; - case I2O_CMD_UTIL_PARAMS_SET: - printk("UTIL_PARAMS_SET, "); - break; - case I2O_CMD_UTIL_REPLY_FAULT_NOTIFY: - printk("UTIL_REPLY_FAULT_NOTIFY, "); - break; - default: - printk("Cmd = %0#2x, ", cmd); - } -} - -/* - * Used for error reporting/debugging purposes - */ -static void i2o_report_exec_cmd(u8 cmd) -{ - switch (cmd) { - case I2O_CMD_ADAPTER_ASSIGN: - printk("EXEC_ADAPTER_ASSIGN, "); - break; - case I2O_CMD_ADAPTER_READ: - printk("EXEC_ADAPTER_READ, "); - break; - case I2O_CMD_ADAPTER_RELEASE: - printk("EXEC_ADAPTER_RELEASE, "); - break; - case I2O_CMD_BIOS_INFO_SET: - printk("EXEC_BIOS_INFO_SET, "); - break; - case I2O_CMD_BOOT_DEVICE_SET: - printk("EXEC_BOOT_DEVICE_SET, "); - break; - case I2O_CMD_CONFIG_VALIDATE: - printk("EXEC_CONFIG_VALIDATE, "); - break; - case I2O_CMD_CONN_SETUP: - printk("EXEC_CONN_SETUP, "); - break; - case I2O_CMD_DDM_DESTROY: - printk("EXEC_DDM_DESTROY, "); - break; - case I2O_CMD_DDM_ENABLE: - printk("EXEC_DDM_ENABLE, "); - break; - case I2O_CMD_DDM_QUIESCE: - printk("EXEC_DDM_QUIESCE, "); - break; - case I2O_CMD_DDM_RESET: - printk("EXEC_DDM_RESET, "); - break; - case I2O_CMD_DDM_SUSPEND: - printk("EXEC_DDM_SUSPEND, "); - break; - case I2O_CMD_DEVICE_ASSIGN: - printk("EXEC_DEVICE_ASSIGN, "); - break; - case I2O_CMD_DEVICE_RELEASE: - printk("EXEC_DEVICE_RELEASE, "); - break; - case I2O_CMD_HRT_GET: - printk("EXEC_HRT_GET, "); - break; - case I2O_CMD_ADAPTER_CLEAR: - printk("EXEC_IOP_CLEAR, "); - break; - case I2O_CMD_ADAPTER_CONNECT: - printk("EXEC_IOP_CONNECT, "); - break; - case I2O_CMD_ADAPTER_RESET: - printk("EXEC_IOP_RESET, "); - break; - case I2O_CMD_LCT_NOTIFY: - printk("EXEC_LCT_NOTIFY, "); - break; - case I2O_CMD_OUTBOUND_INIT: - printk("EXEC_OUTBOUND_INIT, "); - break; - case I2O_CMD_PATH_ENABLE: - printk("EXEC_PATH_ENABLE, "); - break; - case I2O_CMD_PATH_QUIESCE: - printk("EXEC_PATH_QUIESCE, "); - break; - case I2O_CMD_PATH_RESET: - printk("EXEC_PATH_RESET, "); - break; - case I2O_CMD_STATIC_MF_CREATE: - printk("EXEC_STATIC_MF_CREATE, "); - break; - case I2O_CMD_STATIC_MF_RELEASE: - printk("EXEC_STATIC_MF_RELEASE, "); - break; - case I2O_CMD_STATUS_GET: - printk("EXEC_STATUS_GET, "); - break; - case I2O_CMD_SW_DOWNLOAD: - printk("EXEC_SW_DOWNLOAD, "); - break; - case I2O_CMD_SW_UPLOAD: - printk("EXEC_SW_UPLOAD, "); - break; - case I2O_CMD_SW_REMOVE: - printk("EXEC_SW_REMOVE, "); - break; - case I2O_CMD_SYS_ENABLE: - printk("EXEC_SYS_ENABLE, "); - break; - case I2O_CMD_SYS_MODIFY: - printk("EXEC_SYS_MODIFY, "); - break; - case I2O_CMD_SYS_QUIESCE: - printk("EXEC_SYS_QUIESCE, "); - break; - case I2O_CMD_SYS_TAB_SET: - printk("EXEC_SYS_TAB_SET, "); - break; - default: - printk("Cmd = %#02x, ", cmd); - } -} - -void i2o_debug_state(struct i2o_controller *c) -{ - printk(KERN_INFO "%s: State = ", c->name); - switch (((i2o_status_block *) c->status_block.virt)->iop_state) { - case 0x01: - printk("INIT\n"); - break; - case 0x02: - printk("RESET\n"); - break; - case 0x04: - printk("HOLD\n"); - break; - case 0x05: - printk("READY\n"); - break; - case 0x08: - printk("OPERATIONAL\n"); - break; - case 0x10: - printk("FAILED\n"); - break; - case 0x11: - printk("FAULTED\n"); - break; - default: - printk("%x (unknown !!)\n", - ((i2o_status_block *) c->status_block.virt)->iop_state); - } -}; - -void i2o_dump_hrt(struct i2o_controller *c) -{ - u32 *rows = (u32 *) c->hrt.virt; - u8 *p = (u8 *) c->hrt.virt; - u8 *d; - int count; - int length; - int i; - int state; - - if (p[3] != 0) { - printk(KERN_ERR - "%s: HRT table for controller is too new a version.\n", - c->name); - return; - } - - count = p[0] | (p[1] << 8); - length = p[2]; - - printk(KERN_INFO "%s: HRT has %d entries of %d bytes each.\n", - c->name, count, length << 2); - - rows += 2; - - for (i = 0; i < count; i++) { - printk(KERN_INFO "Adapter %08X: ", rows[0]); - p = (u8 *) (rows + 1); - d = (u8 *) (rows + 2); - state = p[1] << 8 | p[0]; - - printk("TID %04X:[", state & 0xFFF); - state >>= 12; - if (state & (1 << 0)) - printk("H"); /* Hidden */ - if (state & (1 << 2)) { - printk("P"); /* Present */ - if (state & (1 << 1)) - printk("C"); /* Controlled */ - } - if (state > 9) - printk("*"); /* Hard */ - - printk("]:"); - - switch (p[3] & 0xFFFF) { - case 0: - /* Adapter private bus - easy */ - printk("Local bus %d: I/O at 0x%04X Mem 0x%08X", p[2], - d[1] << 8 | d[0], *(u32 *) (d + 4)); - break; - case 1: - /* ISA bus */ - printk("ISA %d: CSN %d I/O at 0x%04X Mem 0x%08X", p[2], - d[2], d[1] << 8 | d[0], *(u32 *) (d + 4)); - break; - - case 2: /* EISA bus */ - printk("EISA %d: Slot %d I/O at 0x%04X Mem 0x%08X", - p[2], d[3], d[1] << 8 | d[0], *(u32 *) (d + 4)); - break; - - case 3: /* MCA bus */ - printk("MCA %d: Slot %d I/O at 0x%04X Mem 0x%08X", p[2], - d[3], d[1] << 8 | d[0], *(u32 *) (d + 4)); - break; - - case 4: /* PCI bus */ - printk("PCI %d: Bus %d Device %d Function %d", p[2], - d[2], d[1], d[0]); - break; - - case 0x80: /* Other */ - default: - printk("Unsupported bus type."); - break; - } - printk("\n"); - rows += length; - } -} - -EXPORT_SYMBOL(i2o_dump_message); diff --git a/drivers/staging/i2o/device.c b/drivers/staging/i2o/device.c deleted file mode 100644 index e47496cb0ac2..000000000000 --- a/drivers/staging/i2o/device.c +++ /dev/null @@ -1,592 +0,0 @@ -/* - * Functions to handle I2O devices - * - * Copyright (C) 2004 Markus Lidel - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Fixes/additions: - * Markus Lidel - * initial version. - */ - -#include -#include "i2o.h" -#include -#include -#include -#include "core.h" - -/** - * i2o_device_issue_claim - claim or release a device - * @dev: I2O device to claim or release - * @cmd: claim or release command - * @type: type of claim - * - * Issue I2O UTIL_CLAIM or UTIL_RELEASE messages. The message to be sent - * is set by cmd. dev is the I2O device which should be claim or - * released and the type is the claim type (see the I2O spec). - * - * Returs 0 on success or negative error code on failure. - */ -static inline int i2o_device_issue_claim(struct i2o_device *dev, u32 cmd, - u32 type) -{ - struct i2o_message *msg; - - msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(cmd << 24 | HOST_TID << 12 | dev->lct_data.tid); - msg->body[0] = cpu_to_le32(type); - - return i2o_msg_post_wait(dev->iop, msg, 60); -} - -/** - * i2o_device_claim - claim a device for use by an OSM - * @dev: I2O device to claim - * - * Do the leg work to assign a device to a given OSM. If the claim succeeds, - * the owner is the primary. If the attempt fails a negative errno code - * is returned. On success zero is returned. - */ -int i2o_device_claim(struct i2o_device *dev) -{ - int rc = 0; - - mutex_lock(&dev->lock); - - rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_CLAIM, I2O_CLAIM_PRIMARY); - if (!rc) - pr_debug("i2o: claim of device %d succeeded\n", - dev->lct_data.tid); - else - pr_debug("i2o: claim of device %d failed %d\n", - dev->lct_data.tid, rc); - - mutex_unlock(&dev->lock); - - return rc; -} - -/** - * i2o_device_claim_release - release a device that the OSM is using - * @dev: device to release - * - * Drop a claim by an OSM on a given I2O device. - * - * AC - some devices seem to want to refuse an unclaim until they have - * finished internal processing. It makes sense since you don't want a - * new device to go reconfiguring the entire system until you are done. - * Thus we are prepared to wait briefly. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_device_claim_release(struct i2o_device *dev) -{ - int tries; - int rc = 0; - - mutex_lock(&dev->lock); - - /* - * If the controller takes a nonblocking approach to - * releases we have to sleep/poll for a few times. - */ - for (tries = 0; tries < 10; tries++) { - rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_RELEASE, - I2O_CLAIM_PRIMARY); - if (!rc) - break; - - ssleep(1); - } - - if (!rc) - pr_debug("i2o: claim release of device %d succeeded\n", - dev->lct_data.tid); - else - pr_debug("i2o: claim release of device %d failed %d\n", - dev->lct_data.tid, rc); - - mutex_unlock(&dev->lock); - - return rc; -} - -/** - * i2o_device_release - release the memory for a I2O device - * @dev: I2O device which should be released - * - * Release the allocated memory. This function is called if refcount of - * device reaches 0 automatically. - */ -static void i2o_device_release(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - - pr_debug("i2o: device %s released\n", dev_name(dev)); - - kfree(i2o_dev); -} - -/** - * class_id_show - Displays class id of I2O device - * @dev: device of which the class id should be displayed - * @attr: pointer to device attribute - * @buf: buffer into which the class id should be printed - * - * Returns the number of bytes which are printed into the buffer. - */ -static ssize_t class_id_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - - sprintf(buf, "0x%03x\n", i2o_dev->lct_data.class_id); - return strlen(buf) + 1; -} -static DEVICE_ATTR_RO(class_id); - -/** - * tid_show - Displays TID of I2O device - * @dev: device of which the TID should be displayed - * @attr: pointer to device attribute - * @buf: buffer into which the TID should be printed - * - * Returns the number of bytes which are printed into the buffer. - */ -static ssize_t tid_show(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - - sprintf(buf, "0x%03x\n", i2o_dev->lct_data.tid); - return strlen(buf) + 1; -} -static DEVICE_ATTR_RO(tid); - -/* I2O device attributes */ -static struct attribute *i2o_device_attrs[] = { - &dev_attr_class_id.attr, - &dev_attr_tid.attr, - NULL, -}; - -static const struct attribute_group i2o_device_group = { - .attrs = i2o_device_attrs, -}; - -const struct attribute_group *i2o_device_groups[] = { - &i2o_device_group, - NULL, -}; - -/** - * i2o_device_alloc - Allocate a I2O device and initialize it - * - * Allocate the memory for a I2O device and initialize locks and lists - * - * Returns the allocated I2O device or a negative error code if the device - * could not be allocated. - */ -static struct i2o_device *i2o_device_alloc(void) -{ - struct i2o_device *dev; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) - return ERR_PTR(-ENOMEM); - - INIT_LIST_HEAD(&dev->list); - mutex_init(&dev->lock); - - dev->device.bus = &i2o_bus_type; - dev->device.release = &i2o_device_release; - - return dev; -} - -/** - * i2o_device_add - allocate a new I2O device and add it to the IOP - * @c: I2O controller that the device is on - * @entry: LCT entry of the I2O device - * - * Allocate a new I2O device and initialize it with the LCT entry. The - * device is appended to the device list of the controller. - * - * Returns zero on success, or a -ve errno. - */ -static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry) -{ - struct i2o_device *i2o_dev, *tmp; - int rc; - - i2o_dev = i2o_device_alloc(); - if (IS_ERR(i2o_dev)) { - printk(KERN_ERR "i2o: unable to allocate i2o device\n"); - return PTR_ERR(i2o_dev); - } - - i2o_dev->lct_data = *entry; - - dev_set_name(&i2o_dev->device, "%d:%03x", c->unit, - i2o_dev->lct_data.tid); - - i2o_dev->iop = c; - i2o_dev->device.parent = &c->device; - - rc = device_register(&i2o_dev->device); - if (rc) - goto err; - - list_add_tail(&i2o_dev->list, &c->devices); - - /* create user entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.user_tid); - if (tmp && (tmp != i2o_dev)) { - rc = sysfs_create_link(&i2o_dev->device.kobj, - &tmp->device.kobj, "user"); - if (rc) - goto unreg_dev; - } - - /* create user entries referring to this device */ - list_for_each_entry(tmp, &c->devices, list) - if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - && (tmp != i2o_dev)) { - rc = sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "user"); - if (rc) - goto rmlink1; - } - - /* create parent entries for this device */ - tmp = i2o_iop_find_device(i2o_dev->iop, i2o_dev->lct_data.parent_tid); - if (tmp && (tmp != i2o_dev)) { - rc = sysfs_create_link(&i2o_dev->device.kobj, - &tmp->device.kobj, "parent"); - if (rc) - goto rmlink1; - } - - /* create parent entries referring to this device */ - list_for_each_entry(tmp, &c->devices, list) - if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - && (tmp != i2o_dev)) { - rc = sysfs_create_link(&tmp->device.kobj, - &i2o_dev->device.kobj, "parent"); - if (rc) - goto rmlink2; - } - - i2o_driver_notify_device_add_all(i2o_dev); - - pr_debug("i2o: device %s added\n", dev_name(&i2o_dev->device)); - - return 0; - -rmlink2: - /* If link creating failed halfway, we loop whole list to cleanup. - * And we don't care wrong removing of link, because sysfs_remove_link - * will take care of it. - */ - list_for_each_entry(tmp, &c->devices, list) { - if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "parent"); - } - sysfs_remove_link(&i2o_dev->device.kobj, "parent"); -rmlink1: - list_for_each_entry(tmp, &c->devices, list) - if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "user"); - sysfs_remove_link(&i2o_dev->device.kobj, "user"); -unreg_dev: - list_del(&i2o_dev->list); - device_unregister(&i2o_dev->device); -err: - kfree(i2o_dev); - return rc; -} - -/** - * i2o_device_remove - remove an I2O device from the I2O core - * @i2o_dev: I2O device which should be released - * - * Is used on I2O controller removal or LCT modification, when the device - * is removed from the system. Note that the device could still hang - * around until the refcount reaches 0. - */ -void i2o_device_remove(struct i2o_device *i2o_dev) -{ - struct i2o_device *tmp; - struct i2o_controller *c = i2o_dev->iop; - - i2o_driver_notify_device_remove_all(i2o_dev); - - sysfs_remove_link(&i2o_dev->device.kobj, "parent"); - sysfs_remove_link(&i2o_dev->device.kobj, "user"); - - list_for_each_entry(tmp, &c->devices, list) { - if (tmp->lct_data.parent_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "parent"); - if (tmp->lct_data.user_tid == i2o_dev->lct_data.tid) - sysfs_remove_link(&tmp->device.kobj, "user"); - } - list_del(&i2o_dev->list); - - device_unregister(&i2o_dev->device); -} - -/** - * i2o_device_parse_lct - Parse a previously fetched LCT and create devices - * @c: I2O controller from which the LCT should be parsed. - * - * The Logical Configuration Table tells us what we can talk to on the - * board. For every entry we create an I2O device, which is registered in - * the I2O core. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_device_parse_lct(struct i2o_controller *c) -{ - struct i2o_device *dev, *tmp; - i2o_lct *lct; - u32 *dlct = c->dlct.virt; - int max = 0, i = 0; - u16 table_size; - u32 buf; - - mutex_lock(&c->lct_lock); - - kfree(c->lct); - - buf = le32_to_cpu(*dlct++); - table_size = buf & 0xffff; - - lct = c->lct = kmalloc(table_size * 4, GFP_KERNEL); - if (!lct) { - mutex_unlock(&c->lct_lock); - return -ENOMEM; - } - - lct->lct_ver = buf >> 28; - lct->boot_tid = buf >> 16 & 0xfff; - lct->table_size = table_size; - lct->change_ind = le32_to_cpu(*dlct++); - lct->iop_flags = le32_to_cpu(*dlct++); - - table_size -= 3; - - pr_debug("%s: LCT has %d entries (LCT size: %d)\n", c->name, max, - lct->table_size); - - while (table_size > 0) { - i2o_lct_entry *entry = &lct->lct_entry[max]; - int found = 0; - - buf = le32_to_cpu(*dlct++); - entry->entry_size = buf & 0xffff; - entry->tid = buf >> 16 & 0xfff; - - entry->change_ind = le32_to_cpu(*dlct++); - entry->device_flags = le32_to_cpu(*dlct++); - - buf = le32_to_cpu(*dlct++); - entry->class_id = buf & 0xfff; - entry->version = buf >> 12 & 0xf; - entry->vendor_id = buf >> 16; - - entry->sub_class = le32_to_cpu(*dlct++); - - buf = le32_to_cpu(*dlct++); - entry->user_tid = buf & 0xfff; - entry->parent_tid = buf >> 12 & 0xfff; - entry->bios_info = buf >> 24; - - memcpy(&entry->identity_tag, dlct, 8); - dlct += 2; - - entry->event_capabilities = le32_to_cpu(*dlct++); - - /* add new devices, which are new in the LCT */ - list_for_each_entry_safe(dev, tmp, &c->devices, list) { - if (entry->tid == dev->lct_data.tid) { - found = 1; - break; - } - } - - if (!found) - i2o_device_add(c, entry); - - table_size -= 9; - max++; - } - - /* remove devices, which are not in the LCT anymore */ - list_for_each_entry_safe(dev, tmp, &c->devices, list) { - int found = 0; - - for (i = 0; i < max; i++) { - if (lct->lct_entry[i].tid == dev->lct_data.tid) { - found = 1; - break; - } - } - - if (!found) - i2o_device_remove(dev); - } - - mutex_unlock(&c->lct_lock); - - return 0; -} - -/* - * Run time support routines - */ - -/* Issue UTIL_PARAMS_GET or UTIL_PARAMS_SET - * - * This function can be used for all UtilParamsGet/Set operations. - * The OperationList is given in oplist-buffer, - * and results are returned in reslist-buffer. - * Note that the minimum sized reslist is 8 bytes and contains - * ResultCount, ErrorInfoSize, BlockStatus and BlockSize. - */ -int i2o_parm_issue(struct i2o_device *i2o_dev, int cmd, void *oplist, - int oplen, void *reslist, int reslen) -{ - struct i2o_message *msg; - int i = 0; - int rc; - struct i2o_dma res; - struct i2o_controller *c = i2o_dev->iop; - struct device *dev = &c->pdev->dev; - - res.virt = NULL; - - if (i2o_dma_alloc(dev, &res, reslen)) - return -ENOMEM; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) { - i2o_dma_free(dev, &res); - return PTR_ERR(msg); - } - - i = 0; - msg->u.head[1] = - cpu_to_le32(cmd << 24 | HOST_TID << 12 | i2o_dev->lct_data.tid); - msg->body[i++] = cpu_to_le32(0x00000000); - msg->body[i++] = cpu_to_le32(0x4C000000 | oplen); /* OperationList */ - memcpy(&msg->body[i], oplist, oplen); - i += (oplen / 4 + (oplen % 4 ? 1 : 0)); - msg->body[i++] = cpu_to_le32(0xD0000000 | res.len); /* ResultList */ - msg->body[i++] = cpu_to_le32(res.phys); - - msg->u.head[0] = - cpu_to_le32(I2O_MESSAGE_SIZE(i + sizeof(struct i2o_message) / 4) | - SGL_OFFSET_5); - - rc = i2o_msg_post_wait_mem(c, msg, 10, &res); - - /* This only looks like a memory leak - don't "fix" it. */ - if (rc == -ETIMEDOUT) - return rc; - - memcpy(reslist, res.virt, res.len); - i2o_dma_free(dev, &res); - - return rc; -} - -/* - * Query one field group value or a whole scalar group. - */ -int i2o_parm_field_get(struct i2o_device *i2o_dev, int group, int field, - void *buf, int buflen) -{ - u32 opblk[] = { cpu_to_le32(0x00000001), - cpu_to_le32((u16) group << 16 | I2O_PARAMS_FIELD_GET), - cpu_to_le32((s16) field << 16 | 0x00000001) - }; - u8 *resblk; /* 8 bytes for header */ - int rc; - - resblk = kmalloc(buflen + 8, GFP_KERNEL); - if (!resblk) - return -ENOMEM; - - rc = i2o_parm_issue(i2o_dev, I2O_CMD_UTIL_PARAMS_GET, opblk, - sizeof(opblk), resblk, buflen + 8); - - memcpy(buf, resblk + 8, buflen); /* cut off header */ - - kfree(resblk); - - return rc; -} - -/* - * if oper == I2O_PARAMS_TABLE_GET, get from all rows - * if fieldcount == -1 return all fields - * ibuf and ibuflen are unused (use NULL, 0) - * else return specific fields - * ibuf contains fieldindexes - * - * if oper == I2O_PARAMS_LIST_GET, get from specific rows - * if fieldcount == -1 return all fields - * ibuf contains rowcount, keyvalues - * else return specific fields - * fieldcount is # of fieldindexes - * ibuf contains fieldindexes, rowcount, keyvalues - * - * You could also use directly function i2o_issue_params(). - */ -int i2o_parm_table_get(struct i2o_device *dev, int oper, int group, - int fieldcount, void *ibuf, int ibuflen, void *resblk, - int reslen) -{ - u16 *opblk; - int size; - - size = 10 + ibuflen; - if (size % 4) - size += 4 - size % 4; - - opblk = kmalloc(size, GFP_KERNEL); - if (opblk == NULL) - return -ENOMEM; - - opblk[0] = 1; /* operation count */ - opblk[1] = 0; /* pad */ - opblk[2] = oper; - opblk[3] = group; - opblk[4] = fieldcount; - memcpy(opblk + 5, ibuf, ibuflen); /* other params */ - - size = i2o_parm_issue(dev, I2O_CMD_UTIL_PARAMS_GET, opblk, - size, resblk, reslen); - - kfree(opblk); - if (size > reslen) - return reslen; - - return size; -} - -EXPORT_SYMBOL(i2o_device_claim); -EXPORT_SYMBOL(i2o_device_claim_release); -EXPORT_SYMBOL(i2o_parm_field_get); -EXPORT_SYMBOL(i2o_parm_table_get); -EXPORT_SYMBOL(i2o_parm_issue); diff --git a/drivers/staging/i2o/driver.c b/drivers/staging/i2o/driver.c deleted file mode 100644 index 06119bb3eb5f..000000000000 --- a/drivers/staging/i2o/driver.c +++ /dev/null @@ -1,381 +0,0 @@ -/* - * Functions to handle I2O drivers (OSMs) and I2O bus type for sysfs - * - * Copyright (C) 2004 Markus Lidel - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * Fixes/additions: - * Markus Lidel - * initial version. - */ - -#include -#include -#include -#include "i2o.h" -#include -#include -#include -#include "core.h" - -#define OSM_NAME "i2o" - -/* max_drivers - Maximum I2O drivers (OSMs) which could be registered */ -static unsigned int i2o_max_drivers = I2O_MAX_DRIVERS; -module_param_named(max_drivers, i2o_max_drivers, uint, 0); -MODULE_PARM_DESC(max_drivers, "maximum number of OSM's to support"); - -/* I2O drivers lock and array */ -static spinlock_t i2o_drivers_lock; -static struct i2o_driver **i2o_drivers; - -/** - * i2o_bus_match - Tell if I2O device class id matches the class ids of the I2O driver (OSM) - * @dev: device which should be verified - * @drv: the driver to match against - * - * Used by the bus to check if the driver wants to handle the device. - * - * Returns 1 if the class ids of the driver match the class id of the - * device, otherwise 0. - */ -static int i2o_bus_match(struct device *dev, struct device_driver *drv) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - struct i2o_driver *i2o_drv = to_i2o_driver(drv); - struct i2o_class_id *ids = i2o_drv->classes; - - if (ids) - while (ids->class_id != I2O_CLASS_END) { - if (ids->class_id == i2o_dev->lct_data.class_id) - return 1; - ids++; - } - return 0; -}; - -/* I2O bus type */ -struct bus_type i2o_bus_type = { - .name = "i2o", - .match = i2o_bus_match, - .dev_groups = i2o_device_groups, -}; - -/** - * i2o_driver_register - Register a I2O driver (OSM) in the I2O core - * @drv: I2O driver which should be registered - * - * Registers the OSM drv in the I2O core and creates an event queues if - * necessary. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_driver_register(struct i2o_driver *drv) -{ - struct i2o_controller *c; - int i; - int rc = 0; - unsigned long flags; - - osm_debug("Register driver %s\n", drv->name); - - if (drv->event) { - drv->event_queue = alloc_workqueue("%s", WQ_MEM_RECLAIM, 1, - drv->name); - if (!drv->event_queue) { - osm_err("Could not initialize event queue for driver " - "%s\n", drv->name); - return -EFAULT; - } - osm_debug("Event queue initialized for driver %s\n", drv->name); - } else - drv->event_queue = NULL; - - drv->driver.name = drv->name; - drv->driver.bus = &i2o_bus_type; - - spin_lock_irqsave(&i2o_drivers_lock, flags); - - for (i = 0; i2o_drivers[i]; i++) - if (i >= i2o_max_drivers) { - osm_err("too many drivers registered, increase max_drivers\n"); - spin_unlock_irqrestore(&i2o_drivers_lock, flags); - rc = -EFAULT; - goto out; - } - - drv->context = i; - i2o_drivers[i] = drv; - - spin_unlock_irqrestore(&i2o_drivers_lock, flags); - - osm_debug("driver %s gets context id %d\n", drv->name, drv->context); - - list_for_each_entry(c, &i2o_controllers, list) { - struct i2o_device *i2o_dev; - - i2o_driver_notify_controller_add(drv, c); - list_for_each_entry(i2o_dev, &c->devices, list) - i2o_driver_notify_device_add(drv, i2o_dev); - } - - rc = driver_register(&drv->driver); - if (rc) - goto out; - - return 0; -out: - if (drv->event_queue) { - destroy_workqueue(drv->event_queue); - drv->event_queue = NULL; - } - - return rc; -}; - -/** - * i2o_driver_unregister - Unregister a I2O driver (OSM) from the I2O core - * @drv: I2O driver which should be unregistered - * - * Unregisters the OSM drv from the I2O core and cleanup event queues if - * necessary. - */ -void i2o_driver_unregister(struct i2o_driver *drv) -{ - struct i2o_controller *c; - unsigned long flags; - - osm_debug("unregister driver %s\n", drv->name); - - driver_unregister(&drv->driver); - - list_for_each_entry(c, &i2o_controllers, list) { - struct i2o_device *i2o_dev; - - list_for_each_entry(i2o_dev, &c->devices, list) - i2o_driver_notify_device_remove(drv, i2o_dev); - - i2o_driver_notify_controller_remove(drv, c); - } - - spin_lock_irqsave(&i2o_drivers_lock, flags); - i2o_drivers[drv->context] = NULL; - spin_unlock_irqrestore(&i2o_drivers_lock, flags); - - if (drv->event_queue) { - destroy_workqueue(drv->event_queue); - drv->event_queue = NULL; - osm_debug("event queue removed for %s\n", drv->name); - } -}; - -/** - * i2o_driver_dispatch - dispatch an I2O reply message - * @c: I2O controller of the message - * @m: I2O message number - * - * The reply is delivered to the driver from which the original message - * was. This function is only called from interrupt context. - * - * Returns 0 on success and the message should not be flushed. Returns > 0 - * on success and if the message should be flushed afterwords. Returns - * negative error code on failure (the message will be flushed too). - */ -int i2o_driver_dispatch(struct i2o_controller *c, u32 m) -{ - struct i2o_driver *drv; - struct i2o_message *msg = i2o_msg_out_to_virt(c, m); - u32 context = le32_to_cpu(msg->u.s.icntxt); - unsigned long flags; - - if (unlikely(context >= i2o_max_drivers)) { - osm_warn("%s: Spurious reply to unknown driver %d\n", c->name, - context); - return -EIO; - } - - spin_lock_irqsave(&i2o_drivers_lock, flags); - drv = i2o_drivers[context]; - spin_unlock_irqrestore(&i2o_drivers_lock, flags); - - if (unlikely(!drv)) { - osm_warn("%s: Spurious reply to unknown driver %d\n", c->name, - context); - return -EIO; - } - - if ((le32_to_cpu(msg->u.head[1]) >> 24) == I2O_CMD_UTIL_EVT_REGISTER) { - struct i2o_device *dev, *tmp; - struct i2o_event *evt; - u16 size; - u16 tid = le32_to_cpu(msg->u.head[1]) & 0xfff; - - osm_debug("event received from device %d\n", tid); - - if (!drv->event) - return -EIO; - - /* cut of header from message size (in 32-bit words) */ - size = (le32_to_cpu(msg->u.head[0]) >> 16) - 5; - - evt = kzalloc(size * 4 + sizeof(*evt), GFP_ATOMIC); - if (!evt) - return -ENOMEM; - - evt->size = size; - evt->tcntxt = le32_to_cpu(msg->u.s.tcntxt); - evt->event_indicator = le32_to_cpu(msg->body[0]); - memcpy(&evt->data, &msg->body[1], size * 4); - - list_for_each_entry_safe(dev, tmp, &c->devices, list) - if (dev->lct_data.tid == tid) { - evt->i2o_dev = dev; - break; - } - - INIT_WORK(&evt->work, drv->event); - queue_work(drv->event_queue, &evt->work); - return 1; - } - - if (unlikely(!drv->reply)) { - osm_debug("%s: Reply to driver %s, but no reply function defined!\n", - c->name, drv->name); - return -EIO; - } - - return drv->reply(c, m, msg); -} - -/** - * i2o_driver_notify_controller_add_all - Send notify of added controller - * @c: newly added controller - * - * Send notifications to all registered drivers that a new controller was - * added. - */ -void i2o_driver_notify_controller_add_all(struct i2o_controller *c) -{ - int i; - struct i2o_driver *drv; - - for (i = 0; i < i2o_max_drivers; i++) { - drv = i2o_drivers[i]; - - if (drv) - i2o_driver_notify_controller_add(drv, c); - } -} - -/** - * i2o_driver_notify_controller_remove_all - Send notify of removed controller - * @c: controller that is being removed - * - * Send notifications to all registered drivers that a controller was - * removed. - */ -void i2o_driver_notify_controller_remove_all(struct i2o_controller *c) -{ - int i; - struct i2o_driver *drv; - - for (i = 0; i < i2o_max_drivers; i++) { - drv = i2o_drivers[i]; - - if (drv) - i2o_driver_notify_controller_remove(drv, c); - } -} - -/** - * i2o_driver_notify_device_add_all - Send notify of added device - * @i2o_dev: newly added I2O device - * - * Send notifications to all registered drivers that a device was added. - */ -void i2o_driver_notify_device_add_all(struct i2o_device *i2o_dev) -{ - int i; - struct i2o_driver *drv; - - for (i = 0; i < i2o_max_drivers; i++) { - drv = i2o_drivers[i]; - - if (drv) - i2o_driver_notify_device_add(drv, i2o_dev); - } -} - -/** - * i2o_driver_notify_device_remove_all - Send notify of removed device - * @i2o_dev: device that is being removed - * - * Send notifications to all registered drivers that a device was removed. - */ -void i2o_driver_notify_device_remove_all(struct i2o_device *i2o_dev) -{ - int i; - struct i2o_driver *drv; - - for (i = 0; i < i2o_max_drivers; i++) { - drv = i2o_drivers[i]; - - if (drv) - i2o_driver_notify_device_remove(drv, i2o_dev); - } -} - -/** - * i2o_driver_init - initialize I2O drivers (OSMs) - * - * Registers the I2O bus and allocate memory for the array of OSMs. - * - * Returns 0 on success or negative error code on failure. - */ -int __init i2o_driver_init(void) -{ - int rc = 0; - - spin_lock_init(&i2o_drivers_lock); - - if ((i2o_max_drivers < 2) || (i2o_max_drivers > 64)) { - osm_warn("max_drivers set to %d, but must be >=2 and <= 64\n", - i2o_max_drivers); - i2o_max_drivers = I2O_MAX_DRIVERS; - } - osm_info("max drivers = %d\n", i2o_max_drivers); - - i2o_drivers = - kcalloc(i2o_max_drivers, sizeof(*i2o_drivers), GFP_KERNEL); - if (!i2o_drivers) - return -ENOMEM; - - rc = bus_register(&i2o_bus_type); - - if (rc < 0) - kfree(i2o_drivers); - - return rc; -}; - -/** - * i2o_driver_exit - clean up I2O drivers (OSMs) - * - * Unregisters the I2O bus and frees driver array. - */ -void i2o_driver_exit(void) -{ - bus_unregister(&i2o_bus_type); - kfree(i2o_drivers); -}; - -EXPORT_SYMBOL(i2o_driver_register); -EXPORT_SYMBOL(i2o_driver_unregister); -EXPORT_SYMBOL(i2o_driver_notify_controller_add_all); -EXPORT_SYMBOL(i2o_driver_notify_controller_remove_all); -EXPORT_SYMBOL(i2o_driver_notify_device_add_all); -EXPORT_SYMBOL(i2o_driver_notify_device_remove_all); diff --git a/drivers/staging/i2o/exec-osm.c b/drivers/staging/i2o/exec-osm.c deleted file mode 100644 index dce16e425a6e..000000000000 --- a/drivers/staging/i2o/exec-osm.c +++ /dev/null @@ -1,612 +0,0 @@ -/* - * Executive OSM - * - * Copyright (C) 1999-2002 Red Hat Software - * - * Written by Alan Cox, Building Number Three Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * A lot of the I2O message side code from this is taken from the Red - * Creek RCPCI45 adapter driver by Red Creek Communications - * - * Fixes/additions: - * Philipp Rumpf - * Juha Sievänen - * Auvo Häkkinen - * Deepak Saxena - * Boji T Kannanthanam - * Alan Cox : - * Ported to Linux 2.5. - * Markus Lidel : - * Minor fixes for 2.6. - * Markus Lidel : - * Support for sysfs included. - */ - -#include -#include "i2o.h" -#include -#include -#include -#include -#include /* wait_event_interruptible_timeout() needs this */ -#include /* HZ */ -#include "core.h" - -#define OSM_NAME "exec-osm" - -struct i2o_driver i2o_exec_driver; - -/* global wait list for POST WAIT */ -static LIST_HEAD(i2o_exec_wait_list); - -/* Wait struct needed for POST WAIT */ -struct i2o_exec_wait { - wait_queue_head_t *wq; /* Pointer to Wait queue */ - struct i2o_dma dma; /* DMA buffers to free on failure */ - u32 tcntxt; /* transaction context from reply */ - int complete; /* 1 if reply received otherwise 0 */ - u32 m; /* message id */ - struct i2o_message *msg; /* pointer to the reply message */ - struct list_head list; /* node in global wait list */ - spinlock_t lock; /* lock before modifying */ -}; - -/* Work struct needed to handle LCT NOTIFY replies */ -struct i2o_exec_lct_notify_work { - struct work_struct work; /* work struct */ - struct i2o_controller *c; /* controller on which the LCT NOTIFY - was received */ -}; - -/* Exec OSM class handling definition */ -static struct i2o_class_id i2o_exec_class_id[] = { - {I2O_CLASS_EXECUTIVE}, - {I2O_CLASS_END} -}; - -/** - * i2o_exec_wait_alloc - Allocate a i2o_exec_wait struct an initialize it - * - * Allocate the i2o_exec_wait struct and initialize the wait. - * - * Returns i2o_exec_wait pointer on success or negative error code on - * failure. - */ -static struct i2o_exec_wait *i2o_exec_wait_alloc(void) -{ - struct i2o_exec_wait *wait; - - wait = kzalloc(sizeof(*wait), GFP_KERNEL); - if (!wait) - return NULL; - - INIT_LIST_HEAD(&wait->list); - spin_lock_init(&wait->lock); - - return wait; -}; - -/** - * i2o_exec_wait_free - Free an i2o_exec_wait struct - * @wait: I2O wait data which should be cleaned up - */ -static void i2o_exec_wait_free(struct i2o_exec_wait *wait) -{ - kfree(wait); -}; - -/** - * i2o_msg_post_wait_mem - Post and wait a message with DMA buffers - * @c: controller - * @msg: message to post - * @timeout: time in seconds to wait - * @dma: i2o_dma struct of the DMA buffer to free on failure - * - * This API allows an OSM to post a message and then be told whether or - * not the system received a successful reply. If the message times out - * then the value '-ETIMEDOUT' is returned. This is a special case. In - * this situation the message may (should) complete at an indefinite time - * in the future. When it completes it will use the memory buffer - * attached to the request. If -ETIMEDOUT is returned then the memory - * buffer must not be freed. Instead the event completion will free them - * for you. In all other cases the buffer are your problem. - * - * Returns 0 on success, negative error code on timeout or positive error - * code from reply. - */ -int i2o_msg_post_wait_mem(struct i2o_controller *c, struct i2o_message *msg, - unsigned long timeout, struct i2o_dma *dma) -{ - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wq); - struct i2o_exec_wait *wait; - static u32 tcntxt = 0x80000000; - unsigned long flags; - int rc = 0; - - wait = i2o_exec_wait_alloc(); - if (!wait) { - i2o_msg_nop(c, msg); - return -ENOMEM; - } - - if (tcntxt == 0xffffffff) - tcntxt = 0x80000000; - - if (dma) - wait->dma = *dma; - - /* - * Fill in the message initiator context and transaction context. - * We will only use transaction contexts >= 0x80000000 for POST WAIT, - * so we could find a POST WAIT reply easier in the reply handler. - */ - msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); - wait->tcntxt = tcntxt++; - msg->u.s.tcntxt = cpu_to_le32(wait->tcntxt); - - wait->wq = &wq; - /* - * we add elements to the head, because if a entry in the list will - * never be removed, we have to iterate over it every time - */ - list_add(&wait->list, &i2o_exec_wait_list); - - /* - * Post the message to the controller. At some point later it will - * return. If we time out before it returns then complete will be zero. - */ - i2o_msg_post(c, msg); - - wait_event_interruptible_timeout(wq, wait->complete, timeout * HZ); - - spin_lock_irqsave(&wait->lock, flags); - - wait->wq = NULL; - - if (wait->complete) - rc = le32_to_cpu(wait->msg->body[0]) >> 24; - else { - /* - * We cannot remove it now. This is important. When it does - * terminate (which it must do if the controller has not - * died...) then it will otherwise scribble on stuff. - * - * FIXME: try abort message - */ - if (dma) - dma->virt = NULL; - - rc = -ETIMEDOUT; - } - - spin_unlock_irqrestore(&wait->lock, flags); - - if (rc != -ETIMEDOUT) { - i2o_flush_reply(c, wait->m); - i2o_exec_wait_free(wait); - } - - return rc; -}; - -/** - * i2o_msg_post_wait_complete - Reply to a i2o_msg_post request from IOP - * @c: I2O controller which answers - * @m: message id - * @msg: pointer to the I2O reply message - * @context: transaction context of request - * - * This function is called in interrupt context only. If the reply reached - * before the timeout, the i2o_exec_wait struct is filled with the message - * and the task will be waked up. The task is now responsible for returning - * the message m back to the controller! If the message reaches us after - * the timeout clean up the i2o_exec_wait struct (including allocated - * DMA buffer). - * - * Return 0 on success and if the message m should not be given back to the - * I2O controller, or >0 on success and if the message should be given back - * afterwords. Returns negative error code on failure. In this case the - * message must also be given back to the controller. - */ -static int i2o_msg_post_wait_complete(struct i2o_controller *c, u32 m, - struct i2o_message *msg, u32 context) -{ - struct i2o_exec_wait *wait, *tmp; - unsigned long flags; - int rc = 1; - - /* - * We need to search through the i2o_exec_wait_list to see if the given - * message is still outstanding. If not, it means that the IOP took - * longer to respond to the message than we had allowed and timer has - * already expired. Not much we can do about that except log it for - * debug purposes, increase timeout, and recompile. - */ - list_for_each_entry_safe(wait, tmp, &i2o_exec_wait_list, list) { - if (wait->tcntxt == context) { - spin_lock_irqsave(&wait->lock, flags); - - list_del(&wait->list); - - wait->m = m; - wait->msg = msg; - wait->complete = 1; - - if (wait->wq) - rc = 0; - else - rc = -1; - - spin_unlock_irqrestore(&wait->lock, flags); - - if (rc) { - struct device *dev; - - dev = &c->pdev->dev; - - pr_debug("%s: timedout reply received!\n", - c->name); - i2o_dma_free(dev, &wait->dma); - i2o_exec_wait_free(wait); - } else - wake_up_interruptible(wait->wq); - - return rc; - } - } - - osm_warn("%s: Bogus reply in POST WAIT (tr-context: %08x)!\n", c->name, - context); - - return -1; -}; - -/** - * i2o_exec_show_vendor_id - Displays Vendor ID of controller - * @d: device of which the Vendor ID should be displayed - * @attr: device_attribute to display - * @buf: buffer into which the Vendor ID should be printed - * - * Returns number of bytes printed into buffer. - */ -static ssize_t i2o_exec_show_vendor_id(struct device *d, - struct device_attribute *attr, char *buf) -{ - struct i2o_device *dev = to_i2o_device(d); - u16 id; - - if (!i2o_parm_field_get(dev, 0x0000, 0, &id, 2)) { - sprintf(buf, "0x%04x", le16_to_cpu(id)); - return strlen(buf) + 1; - } - - return 0; -}; - -/** - * i2o_exec_show_product_id - Displays Product ID of controller - * @d: device of which the Product ID should be displayed - * @attr: device_attribute to display - * @buf: buffer into which the Product ID should be printed - * - * Returns number of bytes printed into buffer. - */ -static ssize_t i2o_exec_show_product_id(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct i2o_device *dev = to_i2o_device(d); - u16 id; - - if (!i2o_parm_field_get(dev, 0x0000, 1, &id, 2)) { - sprintf(buf, "0x%04x", le16_to_cpu(id)); - return strlen(buf) + 1; - } - - return 0; -}; - -/* Exec-OSM device attributes */ -static DEVICE_ATTR(vendor_id, S_IRUGO, i2o_exec_show_vendor_id, NULL); -static DEVICE_ATTR(product_id, S_IRUGO, i2o_exec_show_product_id, NULL); - -/** - * i2o_exec_probe - Called if a new I2O device (executive class) appears - * @dev: I2O device which should be probed - * - * Registers event notification for every event from Executive device. The - * return is always 0, because we want all devices of class Executive. - * - * Returns 0 on success. - */ -static int i2o_exec_probe(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - int rc; - - rc = i2o_event_register(i2o_dev, &i2o_exec_driver, 0, 0xffffffff); - if (rc) goto err_out; - - rc = device_create_file(dev, &dev_attr_vendor_id); - if (rc) goto err_evtreg; - rc = device_create_file(dev, &dev_attr_product_id); - if (rc) goto err_vid; - - i2o_dev->iop->exec = i2o_dev; - - return 0; - -err_vid: - device_remove_file(dev, &dev_attr_vendor_id); -err_evtreg: - i2o_event_register(to_i2o_device(dev), &i2o_exec_driver, 0, 0); -err_out: - return rc; -}; - -/** - * i2o_exec_remove - Called on I2O device removal - * @dev: I2O device which was removed - * - * Unregisters event notification from Executive I2O device. - * - * Returns 0 on success. - */ -static int i2o_exec_remove(struct device *dev) -{ - device_remove_file(dev, &dev_attr_product_id); - device_remove_file(dev, &dev_attr_vendor_id); - - i2o_event_register(to_i2o_device(dev), &i2o_exec_driver, 0, 0); - - return 0; -}; - -#ifdef CONFIG_I2O_LCT_NOTIFY_ON_CHANGES -/** - * i2o_exec_lct_notify - Send a asynchronus LCT NOTIFY request - * @c: I2O controller to which the request should be send - * @change_ind: change indicator - * - * This function sends a LCT NOTIFY request to the I2O controller with - * the change indicator change_ind. If the change_ind == 0 the controller - * replies immediately after the request. If change_ind > 0 the reply is - * send after change indicator of the LCT is > change_ind. - */ -static int i2o_exec_lct_notify(struct i2o_controller *c, u32 change_ind) -{ - i2o_status_block *sb = c->status_block.virt; - struct device *dev; - struct i2o_message *msg; - - mutex_lock(&c->lct_lock); - - dev = &c->pdev->dev; - - if (i2o_dma_realloc(dev, &c->dlct, - le32_to_cpu(sb->expected_lct_size))) { - mutex_unlock(&c->lct_lock); - return -ENOMEM; - } - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) { - mutex_unlock(&c->lct_lock); - return PTR_ERR(msg); - } - - msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6); - msg->u.head[1] = cpu_to_le32(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | - ADAPTER_TID); - msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); - msg->u.s.tcntxt = cpu_to_le32(0x00000000); - msg->body[0] = cpu_to_le32(0xffffffff); - msg->body[1] = cpu_to_le32(change_ind); - msg->body[2] = cpu_to_le32(0xd0000000 | c->dlct.len); - msg->body[3] = cpu_to_le32(c->dlct.phys); - - i2o_msg_post(c, msg); - - mutex_unlock(&c->lct_lock); - - return 0; -} -#endif - -/** - * i2o_exec_lct_modified - Called on LCT NOTIFY reply - * @_work: work struct for a specific controller - * - * This function handles asynchronus LCT NOTIFY replies. It parses the - * new LCT and if the buffer for the LCT was to small sends a LCT NOTIFY - * again, otherwise send LCT NOTIFY to get informed on next LCT change. - */ -static void i2o_exec_lct_modified(struct work_struct *_work) -{ - struct i2o_exec_lct_notify_work *work = - container_of(_work, struct i2o_exec_lct_notify_work, work); - u32 change_ind = 0; - struct i2o_controller *c = work->c; - - kfree(work); - - if (i2o_device_parse_lct(c) != -EAGAIN) - change_ind = c->lct->change_ind + 1; - -#ifdef CONFIG_I2O_LCT_NOTIFY_ON_CHANGES - i2o_exec_lct_notify(c, change_ind); -#endif -}; - -/** - * i2o_exec_reply - I2O Executive reply handler - * @c: I2O controller from which the reply comes - * @m: message id - * @msg: pointer to the I2O reply message - * - * This function is always called from interrupt context. If a POST WAIT - * reply was received, pass it to the complete function. If a LCT NOTIFY - * reply was received, a new event is created to handle the update. - * - * Returns 0 on success and if the reply should not be flushed or > 0 - * on success and if the reply should be flushed. Returns negative error - * code on failure and if the reply should be flushed. - */ -static int i2o_exec_reply(struct i2o_controller *c, u32 m, - struct i2o_message *msg) -{ - u32 context; - - if (le32_to_cpu(msg->u.head[0]) & MSG_FAIL) { - struct i2o_message __iomem *pmsg; - u32 pm; - - /* - * If Fail bit is set we must take the transaction context of - * the preserved message to find the right request again. - */ - - pm = le32_to_cpu(msg->body[3]); - pmsg = i2o_msg_in_to_virt(c, pm); - context = readl(&pmsg->u.s.tcntxt); - - i2o_report_status(KERN_INFO, "i2o_core", msg); - - /* Release the preserved msg */ - i2o_msg_nop_mfa(c, pm); - } else - context = le32_to_cpu(msg->u.s.tcntxt); - - if (context & 0x80000000) - return i2o_msg_post_wait_complete(c, m, msg, context); - - if ((le32_to_cpu(msg->u.head[1]) >> 24) == I2O_CMD_LCT_NOTIFY) { - struct i2o_exec_lct_notify_work *work; - - pr_debug("%s: LCT notify received\n", c->name); - - work = kmalloc(sizeof(*work), GFP_ATOMIC); - if (!work) - return -ENOMEM; - - work->c = c; - - INIT_WORK(&work->work, i2o_exec_lct_modified); - queue_work(i2o_exec_driver.event_queue, &work->work); - return 1; - } - - /* - * If this happens, we want to dump the message to the syslog so - * it can be sent back to the card manufacturer by the end user - * to aid in debugging. - * - */ - printk(KERN_WARNING "%s: Unsolicited message reply sent to core! Message dumped to syslog\n", - c->name); - i2o_dump_message(msg); - - return -EFAULT; -} - -/** - * i2o_exec_event - Event handling function - * @work: Work item in occurring event - * - * Handles events send by the Executive device. At the moment does not do - * anything useful. - */ -static void i2o_exec_event(struct work_struct *work) -{ - struct i2o_event *evt = container_of(work, struct i2o_event, work); - - if (likely(evt->i2o_dev)) - osm_debug("Event received from device: %d\n", - evt->i2o_dev->lct_data.tid); - kfree(evt); -}; - -/** - * i2o_exec_lct_get - Get the IOP's Logical Configuration Table - * @c: I2O controller from which the LCT should be fetched - * - * Send a LCT NOTIFY request to the controller, and wait - * I2O_TIMEOUT_LCT_GET seconds until arrival of response. If the LCT is - * to large, retry it. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_exec_lct_get(struct i2o_controller *c) -{ - struct i2o_message *msg; - int i = 0; - int rc = -EAGAIN; - - for (i = 1; i <= I2O_LCT_GET_TRIES; i++) { - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = - cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_LCT_NOTIFY << 24 | HOST_TID << 12 | - ADAPTER_TID); - msg->body[0] = cpu_to_le32(0xffffffff); - msg->body[1] = cpu_to_le32(0x00000000); - msg->body[2] = cpu_to_le32(0xd0000000 | c->dlct.len); - msg->body[3] = cpu_to_le32(c->dlct.phys); - - rc = i2o_msg_post_wait(c, msg, I2O_TIMEOUT_LCT_GET); - if (rc < 0) - break; - - rc = i2o_device_parse_lct(c); - if (rc != -EAGAIN) - break; - } - - return rc; -} - -/* Exec OSM driver struct */ -struct i2o_driver i2o_exec_driver = { - .name = OSM_NAME, - .reply = i2o_exec_reply, - .event = i2o_exec_event, - .classes = i2o_exec_class_id, - .driver = { - .probe = i2o_exec_probe, - .remove = i2o_exec_remove, - }, -}; - -/** - * i2o_exec_init - Registers the Exec OSM - * - * Registers the Exec OSM in the I2O core. - * - * Returns 0 on success or negative error code on failure. - */ -int __init i2o_exec_init(void) -{ - return i2o_driver_register(&i2o_exec_driver); -}; - -/** - * i2o_exec_exit - Removes the Exec OSM - * - * Unregisters the Exec OSM from the I2O core. - */ -void i2o_exec_exit(void) -{ - i2o_driver_unregister(&i2o_exec_driver); -}; - -EXPORT_SYMBOL(i2o_msg_post_wait_mem); -EXPORT_SYMBOL(i2o_exec_lct_get); diff --git a/drivers/staging/i2o/i2o.h b/drivers/staging/i2o/i2o.h deleted file mode 100644 index d23c3c20b201..000000000000 --- a/drivers/staging/i2o/i2o.h +++ /dev/null @@ -1,988 +0,0 @@ -/* - * I2O kernel space accessible structures/APIs - * - * (c) Copyright 1999, 2000 Red Hat Software - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - ************************************************************************* - * - * This header file defined the I2O APIs/structures for use by - * the I2O kernel modules. - * - */ - -#ifndef _I2O_H -#define _I2O_H - -#include - -/* How many different OSM's are we allowing */ -#define I2O_MAX_DRIVERS 8 - -#include -#include -#include -#include -#include -#include /* work_struct */ -#include -#include -#include -#include /* Needed for MUTEX init macros */ - -#include - -/* message queue empty */ -#define I2O_QUEUE_EMPTY 0xffffffff - -/* - * Cache strategies - */ - -/* The NULL strategy leaves everything up to the controller. This tends to be a - * pessimal but functional choice. - */ -#define CACHE_NULL 0 -/* Prefetch data when reading. We continually attempt to load the next 32 sectors - * into the controller cache. - */ -#define CACHE_PREFETCH 1 -/* Prefetch data when reading. We sometimes attempt to load the next 32 sectors - * into the controller cache. When an I/O is less <= 8K we assume its probably - * not sequential and don't prefetch (default) - */ -#define CACHE_SMARTFETCH 2 -/* Data is written to the cache and then out on to the disk. The I/O must be - * physically on the medium before the write is acknowledged (default without - * NVRAM) - */ -#define CACHE_WRITETHROUGH 17 -/* Data is written to the cache and then out on to the disk. The controller - * is permitted to write back the cache any way it wants. (default if battery - * backed NVRAM is present). It can be useful to set this for swap regardless of - * battery state. - */ -#define CACHE_WRITEBACK 18 -/* Optimise for under powered controllers, especially on RAID1 and RAID0. We - * write large I/O's directly to disk bypassing the cache to avoid the extra - * memory copy hits. Small writes are writeback cached - */ -#define CACHE_SMARTBACK 19 -/* Optimise for under powered controllers, especially on RAID1 and RAID0. We - * write large I/O's directly to disk bypassing the cache to avoid the extra - * memory copy hits. Small writes are writethrough cached. Suitable for devices - * lacking battery backup - */ -#define CACHE_SMARTTHROUGH 20 - -/* - * Ioctl structures - */ - -#define BLKI2OGRSTRAT _IOR('2', 1, int) -#define BLKI2OGWSTRAT _IOR('2', 2, int) -#define BLKI2OSRSTRAT _IOW('2', 3, int) -#define BLKI2OSWSTRAT _IOW('2', 4, int) - -/* - * I2O Function codes - */ - -/* - * Executive Class - */ -#define I2O_CMD_ADAPTER_ASSIGN 0xB3 -#define I2O_CMD_ADAPTER_READ 0xB2 -#define I2O_CMD_ADAPTER_RELEASE 0xB5 -#define I2O_CMD_BIOS_INFO_SET 0xA5 -#define I2O_CMD_BOOT_DEVICE_SET 0xA7 -#define I2O_CMD_CONFIG_VALIDATE 0xBB -#define I2O_CMD_CONN_SETUP 0xCA -#define I2O_CMD_DDM_DESTROY 0xB1 -#define I2O_CMD_DDM_ENABLE 0xD5 -#define I2O_CMD_DDM_QUIESCE 0xC7 -#define I2O_CMD_DDM_RESET 0xD9 -#define I2O_CMD_DDM_SUSPEND 0xAF -#define I2O_CMD_DEVICE_ASSIGN 0xB7 -#define I2O_CMD_DEVICE_RELEASE 0xB9 -#define I2O_CMD_HRT_GET 0xA8 -#define I2O_CMD_ADAPTER_CLEAR 0xBE -#define I2O_CMD_ADAPTER_CONNECT 0xC9 -#define I2O_CMD_ADAPTER_RESET 0xBD -#define I2O_CMD_LCT_NOTIFY 0xA2 -#define I2O_CMD_OUTBOUND_INIT 0xA1 -#define I2O_CMD_PATH_ENABLE 0xD3 -#define I2O_CMD_PATH_QUIESCE 0xC5 -#define I2O_CMD_PATH_RESET 0xD7 -#define I2O_CMD_STATIC_MF_CREATE 0xDD -#define I2O_CMD_STATIC_MF_RELEASE 0xDF -#define I2O_CMD_STATUS_GET 0xA0 -#define I2O_CMD_SW_DOWNLOAD 0xA9 -#define I2O_CMD_SW_UPLOAD 0xAB -#define I2O_CMD_SW_REMOVE 0xAD -#define I2O_CMD_SYS_ENABLE 0xD1 -#define I2O_CMD_SYS_MODIFY 0xC1 -#define I2O_CMD_SYS_QUIESCE 0xC3 -#define I2O_CMD_SYS_TAB_SET 0xA3 - -/* - * Utility Class - */ -#define I2O_CMD_UTIL_NOP 0x00 -#define I2O_CMD_UTIL_ABORT 0x01 -#define I2O_CMD_UTIL_CLAIM 0x09 -#define I2O_CMD_UTIL_RELEASE 0x0B -#define I2O_CMD_UTIL_PARAMS_GET 0x06 -#define I2O_CMD_UTIL_PARAMS_SET 0x05 -#define I2O_CMD_UTIL_EVT_REGISTER 0x13 -#define I2O_CMD_UTIL_EVT_ACK 0x14 -#define I2O_CMD_UTIL_CONFIG_DIALOG 0x10 -#define I2O_CMD_UTIL_DEVICE_RESERVE 0x0D -#define I2O_CMD_UTIL_DEVICE_RELEASE 0x0F -#define I2O_CMD_UTIL_LOCK 0x17 -#define I2O_CMD_UTIL_LOCK_RELEASE 0x19 -#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY 0x15 - -/* - * SCSI Host Bus Adapter Class - */ -#define I2O_CMD_SCSI_EXEC 0x81 -#define I2O_CMD_SCSI_ABORT 0x83 -#define I2O_CMD_SCSI_BUSRESET 0x27 - -/* - * Bus Adapter Class - */ -#define I2O_CMD_BUS_ADAPTER_RESET 0x85 -#define I2O_CMD_BUS_RESET 0x87 -#define I2O_CMD_BUS_SCAN 0x89 -#define I2O_CMD_BUS_QUIESCE 0x8b - -/* - * Random Block Storage Class - */ -#define I2O_CMD_BLOCK_READ 0x30 -#define I2O_CMD_BLOCK_WRITE 0x31 -#define I2O_CMD_BLOCK_CFLUSH 0x37 -#define I2O_CMD_BLOCK_MLOCK 0x49 -#define I2O_CMD_BLOCK_MUNLOCK 0x4B -#define I2O_CMD_BLOCK_MMOUNT 0x41 -#define I2O_CMD_BLOCK_MEJECT 0x43 -#define I2O_CMD_BLOCK_POWER 0x70 - -#define I2O_CMD_PRIVATE 0xFF - -/* Command status values */ - -#define I2O_CMD_IN_PROGRESS 0x01 -#define I2O_CMD_REJECTED 0x02 -#define I2O_CMD_FAILED 0x03 -#define I2O_CMD_COMPLETED 0x04 - -/* I2O API function return values */ - -#define I2O_RTN_NO_ERROR 0 -#define I2O_RTN_NOT_INIT 1 -#define I2O_RTN_FREE_Q_EMPTY 2 -#define I2O_RTN_TCB_ERROR 3 -#define I2O_RTN_TRANSACTION_ERROR 4 -#define I2O_RTN_ADAPTER_ALREADY_INIT 5 -#define I2O_RTN_MALLOC_ERROR 6 -#define I2O_RTN_ADPTR_NOT_REGISTERED 7 -#define I2O_RTN_MSG_REPLY_TIMEOUT 8 -#define I2O_RTN_NO_STATUS 9 -#define I2O_RTN_NO_FIRM_VER 10 -#define I2O_RTN_NO_LINK_SPEED 11 - -/* Reply message status defines for all messages */ - -#define I2O_REPLY_STATUS_SUCCESS 0x00 -#define I2O_REPLY_STATUS_ABORT_DIRTY 0x01 -#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER 0x02 -#define I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER 0x03 -#define I2O_REPLY_STATUS_ERROR_DIRTY 0x04 -#define I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER 0x05 -#define I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER 0x06 -#define I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY 0x08 -#define I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER 0x09 -#define I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER 0x0A -#define I2O_REPLY_STATUS_TRANSACTION_ERROR 0x0B -#define I2O_REPLY_STATUS_PROGRESS_REPORT 0x80 - -/* Status codes and Error Information for Parameter functions */ - -#define I2O_PARAMS_STATUS_SUCCESS 0x00 -#define I2O_PARAMS_STATUS_BAD_KEY_ABORT 0x01 -#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE 0x02 -#define I2O_PARAMS_STATUS_BUFFER_FULL 0x03 -#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL 0x04 -#define I2O_PARAMS_STATUS_FIELD_UNREADABLE 0x05 -#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE 0x06 -#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS 0x07 -#define I2O_PARAMS_STATUS_INVALID_GROUP_ID 0x08 -#define I2O_PARAMS_STATUS_INVALID_OPERATION 0x09 -#define I2O_PARAMS_STATUS_NO_KEY_FIELD 0x0A -#define I2O_PARAMS_STATUS_NO_SUCH_FIELD 0x0B -#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP 0x0C -#define I2O_PARAMS_STATUS_OPERATION_ERROR 0x0D -#define I2O_PARAMS_STATUS_SCALAR_ERROR 0x0E -#define I2O_PARAMS_STATUS_TABLE_ERROR 0x0F -#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE 0x10 - -/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error - * messages: Table 3-2 Detailed Status Codes.*/ - -#define I2O_DSC_SUCCESS 0x0000 -#define I2O_DSC_BAD_KEY 0x0002 -#define I2O_DSC_TCL_ERROR 0x0003 -#define I2O_DSC_REPLY_BUFFER_FULL 0x0004 -#define I2O_DSC_NO_SUCH_PAGE 0x0005 -#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT 0x0006 -#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD 0x0007 -#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE 0x0009 -#define I2O_DSC_UNSUPPORTED_FUNCTION 0x000A -#define I2O_DSC_DEVICE_LOCKED 0x000B -#define I2O_DSC_DEVICE_RESET 0x000C -#define I2O_DSC_INAPPROPRIATE_FUNCTION 0x000D -#define I2O_DSC_INVALID_INITIATOR_ADDRESS 0x000E -#define I2O_DSC_INVALID_MESSAGE_FLAGS 0x000F -#define I2O_DSC_INVALID_OFFSET 0x0010 -#define I2O_DSC_INVALID_PARAMETER 0x0011 -#define I2O_DSC_INVALID_REQUEST 0x0012 -#define I2O_DSC_INVALID_TARGET_ADDRESS 0x0013 -#define I2O_DSC_MESSAGE_TOO_LARGE 0x0014 -#define I2O_DSC_MESSAGE_TOO_SMALL 0x0015 -#define I2O_DSC_MISSING_PARAMETER 0x0016 -#define I2O_DSC_TIMEOUT 0x0017 -#define I2O_DSC_UNKNOWN_ERROR 0x0018 -#define I2O_DSC_UNKNOWN_FUNCTION 0x0019 -#define I2O_DSC_UNSUPPORTED_VERSION 0x001A -#define I2O_DSC_DEVICE_BUSY 0x001B -#define I2O_DSC_DEVICE_NOT_AVAILABLE 0x001C - -/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed - Status Codes.*/ - -#define I2O_BSA_DSC_SUCCESS 0x0000 -#define I2O_BSA_DSC_MEDIA_ERROR 0x0001 -#define I2O_BSA_DSC_ACCESS_ERROR 0x0002 -#define I2O_BSA_DSC_DEVICE_FAILURE 0x0003 -#define I2O_BSA_DSC_DEVICE_NOT_READY 0x0004 -#define I2O_BSA_DSC_MEDIA_NOT_PRESENT 0x0005 -#define I2O_BSA_DSC_MEDIA_LOCKED 0x0006 -#define I2O_BSA_DSC_MEDIA_FAILURE 0x0007 -#define I2O_BSA_DSC_PROTOCOL_FAILURE 0x0008 -#define I2O_BSA_DSC_BUS_FAILURE 0x0009 -#define I2O_BSA_DSC_ACCESS_VIOLATION 0x000A -#define I2O_BSA_DSC_WRITE_PROTECTED 0x000B -#define I2O_BSA_DSC_DEVICE_RESET 0x000C -#define I2O_BSA_DSC_VOLUME_CHANGED 0x000D -#define I2O_BSA_DSC_TIMEOUT 0x000E - -/* FailureStatusCodes, Table 3-3 Message Failure Codes */ - -#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED 0x81 -#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED 0x82 -#define I2O_FSC_TRANSPORT_CONGESTION 0x83 -#define I2O_FSC_TRANSPORT_FAILURE 0x84 -#define I2O_FSC_TRANSPORT_STATE_ERROR 0x85 -#define I2O_FSC_TRANSPORT_TIME_OUT 0x86 -#define I2O_FSC_TRANSPORT_ROUTING_FAILURE 0x87 -#define I2O_FSC_TRANSPORT_INVALID_VERSION 0x88 -#define I2O_FSC_TRANSPORT_INVALID_OFFSET 0x89 -#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS 0x8A -#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL 0x8B -#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE 0x8C -#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID 0x8D -#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID 0x8E -#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT 0x8F -#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE 0xFF - -/* Device Claim Types */ -#define I2O_CLAIM_PRIMARY 0x01000000 -#define I2O_CLAIM_MANAGEMENT 0x02000000 -#define I2O_CLAIM_AUTHORIZED 0x03000000 -#define I2O_CLAIM_SECONDARY 0x04000000 - -/* Message header defines for VersionOffset */ -#define I2OVER15 0x0001 -#define I2OVER20 0x0002 - -/* Default is 1.5 */ -#define I2OVERSION I2OVER15 - -#define SGL_OFFSET_0 I2OVERSION -#define SGL_OFFSET_4 (0x0040 | I2OVERSION) -#define SGL_OFFSET_5 (0x0050 | I2OVERSION) -#define SGL_OFFSET_6 (0x0060 | I2OVERSION) -#define SGL_OFFSET_7 (0x0070 | I2OVERSION) -#define SGL_OFFSET_8 (0x0080 | I2OVERSION) -#define SGL_OFFSET_9 (0x0090 | I2OVERSION) -#define SGL_OFFSET_10 (0x00A0 | I2OVERSION) -#define SGL_OFFSET_11 (0x00B0 | I2OVERSION) -#define SGL_OFFSET_12 (0x00C0 | I2OVERSION) -#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION) - -/* Transaction Reply Lists (TRL) Control Word structure */ -#define TRL_SINGLE_FIXED_LENGTH 0x00 -#define TRL_SINGLE_VARIABLE_LENGTH 0x40 -#define TRL_MULTIPLE_FIXED_LENGTH 0x80 - - /* msg header defines for MsgFlags */ -#define MSG_STATIC 0x0100 -#define MSG_64BIT_CNTXT 0x0200 -#define MSG_MULTI_TRANS 0x1000 -#define MSG_FAIL 0x2000 -#define MSG_FINAL 0x4000 -#define MSG_REPLY 0x8000 - - /* minimum size msg */ -#define THREE_WORD_MSG_SIZE 0x00030000 -#define FOUR_WORD_MSG_SIZE 0x00040000 -#define FIVE_WORD_MSG_SIZE 0x00050000 -#define SIX_WORD_MSG_SIZE 0x00060000 -#define SEVEN_WORD_MSG_SIZE 0x00070000 -#define EIGHT_WORD_MSG_SIZE 0x00080000 -#define NINE_WORD_MSG_SIZE 0x00090000 -#define TEN_WORD_MSG_SIZE 0x000A0000 -#define ELEVEN_WORD_MSG_SIZE 0x000B0000 -#define I2O_MESSAGE_SIZE(x) ((x)<<16) - -/* special TID assignments */ -#define ADAPTER_TID 0 -#define HOST_TID 1 - -/* outbound queue defines */ -#define I2O_MAX_OUTBOUND_MSG_FRAMES 128 -#define I2O_OUTBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ - -/* inbound queue definitions */ -#define I2O_MSG_INPOOL_MIN 32 -#define I2O_INBOUND_MSG_FRAME_SIZE 128 /* in 32-bit words */ - -#define I2O_POST_WAIT_OK 0 -#define I2O_POST_WAIT_TIMEOUT -ETIMEDOUT - -#define I2O_CONTEXT_LIST_MIN_LENGTH 15 -#define I2O_CONTEXT_LIST_USED 0x01 -#define I2O_CONTEXT_LIST_DELETED 0x02 - -/* timeouts */ -#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE 15 -#define I2O_TIMEOUT_MESSAGE_GET 5 -#define I2O_TIMEOUT_RESET 30 -#define I2O_TIMEOUT_STATUS_GET 5 -#define I2O_TIMEOUT_LCT_GET 360 -#define I2O_TIMEOUT_SCSI_SCB_ABORT 240 - -/* retries */ -#define I2O_HRT_GET_TRIES 3 -#define I2O_LCT_GET_TRIES 3 - -/* defines for max_sectors and max_phys_segments */ -#define I2O_MAX_SECTORS 1024 -#define I2O_MAX_SECTORS_LIMITED 128 -#define I2O_MAX_PHYS_SEGMENTS BLK_MAX_SEGMENTS - -/* - * Message structures - */ -struct i2o_message { - union { - struct { - u8 version_offset; - u8 flags; - u16 size; - u32 target_tid:12; - u32 init_tid:12; - u32 function:8; - u32 icntxt; /* initiator context */ - u32 tcntxt; /* transaction context */ - } s; - u32 head[4]; - } u; - /* List follows */ - u32 body[0]; -}; - -/* MFA and I2O message used by mempool */ -struct i2o_msg_mfa { - u32 mfa; /* MFA returned by the controller */ - struct i2o_message msg; /* I2O message */ -}; - -/* - * Each I2O device entity has one of these. There is one per device. - */ -struct i2o_device { - i2o_lct_entry lct_data; /* Device LCT information */ - - struct i2o_controller *iop; /* Controlling IOP */ - struct list_head list; /* node in IOP devices list */ - - struct device device; - - struct mutex lock; /* device lock */ -}; - -/* - * Event structure provided to the event handling function - */ -struct i2o_event { - struct work_struct work; - struct i2o_device *i2o_dev; /* I2O device pointer from which the - event reply was initiated */ - u16 size; /* Size of data in 32-bit words */ - u32 tcntxt; /* Transaction context used at - registration */ - u32 event_indicator; /* Event indicator from reply */ - u32 data[0]; /* Event data from reply */ -}; - -/* - * I2O classes which could be handled by the OSM - */ -struct i2o_class_id { - u16 class_id:12; -}; - -/* - * I2O driver structure for OSMs - */ -struct i2o_driver { - char *name; /* OSM name */ - int context; /* Low 8 bits of the transaction info */ - struct i2o_class_id *classes; /* I2O classes that this OSM handles */ - - /* Message reply handler */ - int (*reply) (struct i2o_controller *, u32, struct i2o_message *); - - /* Event handler */ - work_func_t event; - - struct workqueue_struct *event_queue; /* Event queue */ - - struct device_driver driver; - - /* notification of changes */ - void (*notify_controller_add) (struct i2o_controller *); - void (*notify_controller_remove) (struct i2o_controller *); - void (*notify_device_add) (struct i2o_device *); - void (*notify_device_remove) (struct i2o_device *); - - struct semaphore lock; -}; - -/* - * Contains DMA mapped address information - */ -struct i2o_dma { - void *virt; - dma_addr_t phys; - size_t len; -}; - -/* - * Contains slab cache and mempool information - */ -struct i2o_pool { - char *name; - struct kmem_cache *slab; - mempool_t *mempool; -}; - -/* - * Contains IO mapped address information - */ -struct i2o_io { - void __iomem *virt; - unsigned long phys; - unsigned long len; -}; - -/* - * Context queue entry, used for 32-bit context on 64-bit systems - */ -struct i2o_context_list_element { - struct list_head list; - u32 context; - void *ptr; - unsigned long timestamp; -}; - -/* - * Each I2O controller has one of these objects - */ -struct i2o_controller { - char name[16]; - int unit; - int type; - - struct pci_dev *pdev; /* PCI device */ - - unsigned int promise:1; /* Promise controller */ - unsigned int adaptec:1; /* DPT / Adaptec controller */ - unsigned int raptor:1; /* split bar */ - unsigned int no_quiesce:1; /* dont quiesce before reset */ - unsigned int short_req:1; /* use small block sizes */ - unsigned int limit_sectors:1; /* limit number of sectors / request */ - unsigned int pae_support:1; /* controller has 64-bit SGL support */ - - struct list_head devices; /* list of I2O devices */ - struct list_head list; /* Controller list */ - - void __iomem *in_port; /* Inbout port address */ - void __iomem *out_port; /* Outbound port address */ - void __iomem *irq_status; /* Interrupt status register address */ - void __iomem *irq_mask; /* Interrupt mask register address */ - - struct i2o_dma status; /* IOP status block */ - - struct i2o_dma hrt; /* HW Resource Table */ - i2o_lct *lct; /* Logical Config Table */ - struct i2o_dma dlct; /* Temp LCT */ - struct mutex lct_lock; /* Lock for LCT updates */ - struct i2o_dma status_block; /* IOP status block */ - - struct i2o_io base; /* controller messaging unit */ - struct i2o_io in_queue; /* inbound message queue Host->IOP */ - struct i2o_dma out_queue; /* outbound message queue IOP->Host */ - - struct i2o_pool in_msg; /* mempool for inbound messages */ - - unsigned int battery:1; /* Has a battery backup */ - unsigned int io_alloc:1; /* An I/O resource was allocated */ - unsigned int mem_alloc:1; /* A memory resource was allocated */ - - struct resource io_resource; /* I/O resource allocated to the IOP */ - struct resource mem_resource; /* Mem resource allocated to the IOP */ - - struct device device; - struct i2o_device *exec; /* Executive */ -#if BITS_PER_LONG == 64 - spinlock_t context_list_lock; /* lock for context_list */ - atomic_t context_list_counter; /* needed for unique contexts */ - struct list_head context_list; /* list of context id's - and pointers */ -#endif - spinlock_t lock; /* lock for controller - configuration */ - void *driver_data[I2O_MAX_DRIVERS]; /* storage for drivers */ -}; - -/* - * I2O System table entry - * - * The system table contains information about all the IOPs in the - * system. It is sent to all IOPs so that they can create peer2peer - * connections between them. - */ -struct i2o_sys_tbl_entry { - u16 org_id; - u16 reserved1; - u32 iop_id:12; - u32 reserved2:20; - u16 seg_num:12; - u16 i2o_version:4; - u8 iop_state; - u8 msg_type; - u16 frame_size; - u16 reserved3; - u32 last_changed; - u32 iop_capabilities; - u32 inbound_low; - u32 inbound_high; -}; - -struct i2o_sys_tbl { - u8 num_entries; - u8 version; - u16 reserved1; - u32 change_ind; - u32 reserved2; - u32 reserved3; - struct i2o_sys_tbl_entry iops[0]; -}; - -extern struct list_head i2o_controllers; - -/* Message functions */ -extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int); -extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *, - unsigned long, struct i2o_dma *); - -/* IOP functions */ -extern int i2o_status_get(struct i2o_controller *); - -extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int, - u32); -extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16); -extern struct i2o_controller *i2o_find_iop(int); - -/* Functions needed for handling 64-bit pointers in 32-bit context */ -#if BITS_PER_LONG == 64 -extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *); -extern void *i2o_cntxt_list_get(struct i2o_controller *, u32); -extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *); -extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *); - -static inline u32 i2o_ptr_low(void *ptr) -{ - return (u32) (u64) ptr; -}; - -static inline u32 i2o_ptr_high(void *ptr) -{ - return (u32) ((u64) ptr >> 32); -}; - -static inline u32 i2o_dma_low(dma_addr_t dma_addr) -{ - return (u32) (u64) dma_addr; -}; - -static inline u32 i2o_dma_high(dma_addr_t dma_addr) -{ - return (u32) ((u64) dma_addr >> 32); -}; -#else -static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr) -{ - return (u32) ptr; -}; - -static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context) -{ - return (void *)context; -}; - -static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr) -{ - return (u32) ptr; -}; - -static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr) -{ - return (u32) ptr; -}; - -static inline u32 i2o_ptr_low(void *ptr) -{ - return (u32) ptr; -}; - -static inline u32 i2o_ptr_high(void *ptr) -{ - return 0; -}; - -static inline u32 i2o_dma_low(dma_addr_t dma_addr) -{ - return (u32) dma_addr; -}; - -static inline u32 i2o_dma_high(dma_addr_t dma_addr) -{ - return 0; -}; -#endif - -extern u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size); -extern dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, - size_t size, - enum dma_data_direction direction, - u32 ** sg_ptr); -extern int i2o_dma_map_sg(struct i2o_controller *c, - struct scatterlist *sg, int sg_count, - enum dma_data_direction direction, - u32 ** sg_ptr); -extern int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len); -extern void i2o_dma_free(struct device *dev, struct i2o_dma *addr); -extern int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, - size_t len); -extern int i2o_pool_alloc(struct i2o_pool *pool, const char *name, - size_t size, int min_nr); -extern void i2o_pool_free(struct i2o_pool *pool); -/* I2O driver (OSM) functions */ -extern int i2o_driver_register(struct i2o_driver *); -extern void i2o_driver_unregister(struct i2o_driver *); - -/** - * i2o_driver_notify_controller_add - Send notification of added controller - * @drv: I2O driver - * @c: I2O controller - * - * Send notification of added controller to a single registered driver. - */ -static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv, - struct i2o_controller *c) -{ - if (drv->notify_controller_add) - drv->notify_controller_add(c); -}; - -/** - * i2o_driver_notify_controller_remove - Send notification of removed controller - * @drv: I2O driver - * @c: I2O controller - * - * Send notification of removed controller to a single registered driver. - */ -static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv, - struct i2o_controller *c) -{ - if (drv->notify_controller_remove) - drv->notify_controller_remove(c); -}; - -/** - * i2o_driver_notify_device_add - Send notification of added device - * @drv: I2O driver - * @i2o_dev: the added i2o_device - * - * Send notification of added device to a single registered driver. - */ -static inline void i2o_driver_notify_device_add(struct i2o_driver *drv, - struct i2o_device *i2o_dev) -{ - if (drv->notify_device_add) - drv->notify_device_add(i2o_dev); -}; - -/** - * i2o_driver_notify_device_remove - Send notification of removed device - * @drv: I2O driver - * @i2o_dev: the added i2o_device - * - * Send notification of removed device to a single registered driver. - */ -static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv, - struct i2o_device *i2o_dev) -{ - if (drv->notify_device_remove) - drv->notify_device_remove(i2o_dev); -}; - -extern void i2o_driver_notify_controller_add_all(struct i2o_controller *); -extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *); -extern void i2o_driver_notify_device_add_all(struct i2o_device *); -extern void i2o_driver_notify_device_remove_all(struct i2o_device *); - -/* I2O device functions */ -extern int i2o_device_claim(struct i2o_device *); -extern int i2o_device_claim_release(struct i2o_device *); - -/* Exec OSM functions */ -extern int i2o_exec_lct_get(struct i2o_controller *); - -/* device / driver / kobject conversion functions */ -#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver) -#define to_i2o_device(dev) container_of(dev, struct i2o_device, device) -#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device) - -/** - * i2o_out_to_virt - Turn an I2O message to a virtual address - * @c: controller - * @m: message engine value - * - * Turn a receive message from an I2O controller bus address into - * a Linux virtual address. The shared page frame is a linear block - * so we simply have to shift the offset. This function does not - * work for sender side messages as they are ioremap objects - * provided by the I2O controller. - */ -static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c, - u32 m) -{ - BUG_ON(m < c->out_queue.phys - || m >= c->out_queue.phys + c->out_queue.len); - - return c->out_queue.virt + (m - c->out_queue.phys); -}; - -/** - * i2o_msg_in_to_virt - Turn an I2O message to a virtual address - * @c: controller - * @m: message engine value - * - * Turn a send message from an I2O controller bus address into - * a Linux virtual address. The shared page frame is a linear block - * so we simply have to shift the offset. This function does not - * work for receive side messages as they are kmalloc objects - * in a different pool. - */ -static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct - i2o_controller *c, - u32 m) -{ - return c->in_queue.virt + m; -}; - -/** - * i2o_msg_get - obtain an I2O message from the IOP - * @c: I2O controller - * - * This function tries to get a message frame. If no message frame is - * available do not wait until one is available (see also i2o_msg_get_wait). - * The returned pointer to the message frame is not in I/O memory, it is - * allocated from a mempool. But because a MFA is allocated from the - * controller too it is guaranteed that i2o_msg_post() will never fail. - * - * On a success a pointer to the message frame is returned. If the message - * queue is empty -EBUSY is returned and if no memory is available -ENOMEM - * is returned. - */ -static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c) -{ - struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC); - if (!mmsg) - return ERR_PTR(-ENOMEM); - - mmsg->mfa = readl(c->in_port); - if (unlikely(mmsg->mfa >= c->in_queue.len)) { - u32 mfa = mmsg->mfa; - - mempool_free(mmsg, c->in_msg.mempool); - - if (mfa == I2O_QUEUE_EMPTY) - return ERR_PTR(-EBUSY); - return ERR_PTR(-EFAULT); - } - - return &mmsg->msg; -}; - -/** - * i2o_msg_post - Post I2O message to I2O controller - * @c: I2O controller to which the message should be send - * @msg: message returned by i2o_msg_get() - * - * Post the message to the I2O controller and return immediately. - */ -static inline void i2o_msg_post(struct i2o_controller *c, - struct i2o_message *msg) -{ - struct i2o_msg_mfa *mmsg; - - mmsg = container_of(msg, struct i2o_msg_mfa, msg); - memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg, - (le32_to_cpu(msg->u.head[0]) >> 16) << 2); - writel(mmsg->mfa, c->in_port); - mempool_free(mmsg, c->in_msg.mempool); -}; - -/** - * i2o_msg_post_wait - Post and wait a message and wait until return - * @c: controller - * @msg: message to post - * @timeout: time in seconds to wait - * - * This API allows an OSM to post a message and then be told whether or - * not the system received a successful reply. If the message times out - * then the value '-ETIMEDOUT' is returned. - * - * Returns 0 on success or negative error code on failure. - */ -static inline int i2o_msg_post_wait(struct i2o_controller *c, - struct i2o_message *msg, - unsigned long timeout) -{ - return i2o_msg_post_wait_mem(c, msg, timeout, NULL); -}; - -/** - * i2o_msg_nop_mfa - Returns a fetched MFA back to the controller - * @c: I2O controller from which the MFA was fetched - * @mfa: MFA which should be returned - * - * This function must be used for preserved messages, because i2o_msg_nop() - * also returns the allocated memory back to the msg_pool mempool. - */ -static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa) -{ - struct i2o_message __iomem *msg; - u32 nop[3] = { - THREE_WORD_MSG_SIZE | SGL_OFFSET_0, - I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID, - 0x00000000 - }; - - msg = i2o_msg_in_to_virt(c, mfa); - memcpy_toio(msg, nop, sizeof(nop)); - writel(mfa, c->in_port); -}; - -/** - * i2o_msg_nop - Returns a message which is not used - * @c: I2O controller from which the message was created - * @msg: message which should be returned - * - * If you fetch a message via i2o_msg_get, and can't use it, you must - * return the message with this function. Otherwise the MFA is lost as well - * as the allocated memory from the mempool. - */ -static inline void i2o_msg_nop(struct i2o_controller *c, - struct i2o_message *msg) -{ - struct i2o_msg_mfa *mmsg; - mmsg = container_of(msg, struct i2o_msg_mfa, msg); - - i2o_msg_nop_mfa(c, mmsg->mfa); - mempool_free(mmsg, c->in_msg.mempool); -}; - -/** - * i2o_flush_reply - Flush reply from I2O controller - * @c: I2O controller - * @m: the message identifier - * - * The I2O controller must be informed that the reply message is not needed - * anymore. If you forget to flush the reply, the message frame can't be - * used by the controller anymore and is therefore lost. - */ -static inline void i2o_flush_reply(struct i2o_controller *c, u32 m) -{ - writel(m, c->out_port); -}; - -/* - * Endian handling wrapped into the macro - keeps the core code - * cleaner. - */ - -#define i2o_raw_writel(val, mem) __raw_writel(cpu_to_le32(val), mem) - -extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int); -extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int, - void *, int); - -/* debugging and troubleshooting/diagnostic helpers. */ -#define osm_printk(level, format, arg...) \ - printk(level "%s: " format, OSM_NAME , ## arg) - -#ifdef DEBUG -#define osm_debug(format, arg...) \ - osm_printk(KERN_DEBUG, format , ## arg) -#else -#define osm_debug(format, arg...) \ - do { } while (0) -#endif - -#define osm_err(format, arg...) \ - osm_printk(KERN_ERR, format , ## arg) -#define osm_info(format, arg...) \ - osm_printk(KERN_INFO, format , ## arg) -#define osm_warn(format, arg...) \ - osm_printk(KERN_WARNING, format , ## arg) - -/* debugging functions */ -extern void i2o_report_status(const char *, const char *, struct i2o_message *); -extern void i2o_dump_message(struct i2o_message *); -extern void i2o_dump_hrt(struct i2o_controller *c); -extern void i2o_debug_state(struct i2o_controller *c); - -#endif /* _I2O_H */ diff --git a/drivers/staging/i2o/i2o_block.c b/drivers/staging/i2o/i2o_block.c deleted file mode 100644 index 406758f755ee..000000000000 --- a/drivers/staging/i2o/i2o_block.c +++ /dev/null @@ -1,1228 +0,0 @@ -/* - * Block OSM - * - * Copyright (C) 1999-2002 Red Hat Software - * - * Written by Alan Cox, Building Number Three Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * For the purpose of avoiding doubt the preferred form of the work - * for making modifications shall be a standards compliant form such - * gzipped tar and not one requiring a proprietary or patent encumbered - * tool to unpack. - * - * Fixes/additions: - * Steve Ralston: - * Multiple device handling error fixes, - * Added a queue depth. - * Alan Cox: - * FC920 has an rmw bug. Dont or in the end marker. - * Removed queue walk, fixed for 64bitness. - * Rewrote much of the code over time - * Added indirect block lists - * Handle 64K limits on many controllers - * Don't use indirects on the Promise (breaks) - * Heavily chop down the queue depths - * Deepak Saxena: - * Independent queues per IOP - * Support for dynamic device creation/deletion - * Code cleanup - * Support for larger I/Os through merge* functions - * (taken from DAC960 driver) - * Boji T Kannanthanam: - * Set the I2O Block devices to be detected in increasing - * order of TIDs during boot. - * Search and set the I2O block device that we boot off - * from as the first device to be claimed (as /dev/i2o/hda) - * Properly attach/detach I2O gendisk structure from the - * system gendisk list. The I2O block devices now appear in - * /proc/partitions. - * Markus Lidel : - * Minor bugfixes for 2.6. - */ - -#include -#include -#include "i2o.h" -#include - -#include - -#include -#include -#include - -#include - -#include "i2o_block.h" - -#define OSM_NAME "block-osm" -#define OSM_VERSION "1.325" -#define OSM_DESCRIPTION "I2O Block Device OSM" - -static DEFINE_MUTEX(i2o_block_mutex); -static struct i2o_driver i2o_block_driver; - -/* global Block OSM request mempool */ -static struct i2o_block_mempool i2o_blk_req_pool; - -/* Block OSM class handling definition */ -static struct i2o_class_id i2o_block_class_id[] = { - {I2O_CLASS_RANDOM_BLOCK_STORAGE}, - {I2O_CLASS_END} -}; - -/** - * i2o_block_device_free - free the memory of the I2O Block device - * @dev: I2O Block device, which should be cleaned up - * - * Frees the request queue, gendisk and the i2o_block_device structure. - */ -static void i2o_block_device_free(struct i2o_block_device *dev) -{ - blk_cleanup_queue(dev->gd->queue); - - put_disk(dev->gd); - - kfree(dev); -}; - -/** - * i2o_block_remove - remove the I2O Block device from the system again - * @dev: I2O Block device which should be removed - * - * Remove gendisk from system and free all allocated memory. - * - * Always returns 0. - */ -static int i2o_block_remove(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - struct i2o_block_device *i2o_blk_dev = dev_get_drvdata(dev); - - osm_info("device removed (TID: %03x): %s\n", i2o_dev->lct_data.tid, - i2o_blk_dev->gd->disk_name); - - i2o_event_register(i2o_dev, &i2o_block_driver, 0, 0); - - del_gendisk(i2o_blk_dev->gd); - - dev_set_drvdata(dev, NULL); - - i2o_device_claim_release(i2o_dev); - - i2o_block_device_free(i2o_blk_dev); - - return 0; -}; - -/** - * i2o_block_device flush - Flush all dirty data of I2O device dev - * @dev: I2O device which should be flushed - * - * Flushes all dirty data on device dev. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_block_device_flush(struct i2o_device *dev) -{ - struct i2o_message *msg; - - msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_BLOCK_CFLUSH << 24 | HOST_TID << 12 | dev-> - lct_data.tid); - msg->body[0] = cpu_to_le32(60 << 16); - osm_debug("Flushing...\n"); - - return i2o_msg_post_wait(dev->iop, msg, 60); -}; - -/** - * i2o_block_device_mount - Mount (load) the media of device dev - * @dev: I2O device which should receive the mount request - * @media_id: Media Identifier - * - * Load a media into drive. Identifier should be set to -1, because the - * spec does not support any other value. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_block_device_mount(struct i2o_device *dev, u32 media_id) -{ - struct i2o_message *msg; - - msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_BLOCK_MMOUNT << 24 | HOST_TID << 12 | dev-> - lct_data.tid); - msg->body[0] = cpu_to_le32(-1); - msg->body[1] = cpu_to_le32(0x00000000); - osm_debug("Mounting...\n"); - - return i2o_msg_post_wait(dev->iop, msg, 2); -}; - -/** - * i2o_block_device_lock - Locks the media of device dev - * @dev: I2O device which should receive the lock request - * @media_id: Media Identifier - * - * Lock media of device dev to prevent removal. The media identifier - * should be set to -1, because the spec does not support any other value. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_block_device_lock(struct i2o_device *dev, u32 media_id) -{ - struct i2o_message *msg; - - msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_BLOCK_MLOCK << 24 | HOST_TID << 12 | dev-> - lct_data.tid); - msg->body[0] = cpu_to_le32(-1); - osm_debug("Locking...\n"); - - return i2o_msg_post_wait(dev->iop, msg, 2); -}; - -/** - * i2o_block_device_unlock - Unlocks the media of device dev - * @dev: I2O device which should receive the unlocked request - * @media_id: Media Identifier - * - * Unlocks the media in device dev. The media identifier should be set to - * -1, because the spec does not support any other value. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_block_device_unlock(struct i2o_device *dev, u32 media_id) -{ - struct i2o_message *msg; - - msg = i2o_msg_get_wait(dev->iop, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_BLOCK_MUNLOCK << 24 | HOST_TID << 12 | dev-> - lct_data.tid); - msg->body[0] = cpu_to_le32(media_id); - osm_debug("Unlocking...\n"); - - return i2o_msg_post_wait(dev->iop, msg, 2); -}; - -/** - * i2o_block_device_power - Power management for device dev - * @dev: I2O device which should receive the power management request - * @op: Operation to send - * - * Send a power management request to the device dev. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_block_device_power(struct i2o_block_device *dev, u8 op) -{ - struct i2o_device *i2o_dev = dev->i2o_dev; - struct i2o_controller *c = i2o_dev->iop; - struct i2o_message *msg; - int rc; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_BLOCK_POWER << 24 | HOST_TID << 12 | i2o_dev-> - lct_data.tid); - msg->body[0] = cpu_to_le32(op << 24); - osm_debug("Power...\n"); - - rc = i2o_msg_post_wait(c, msg, 60); - if (!rc) - dev->power = op; - - return rc; -}; - -/** - * i2o_block_request_alloc - Allocate an I2O block request struct - * - * Allocates an I2O block request struct and initialize the list. - * - * Returns a i2o_block_request pointer on success or negative error code - * on failure. - */ -static inline struct i2o_block_request *i2o_block_request_alloc(void) -{ - struct i2o_block_request *ireq; - - ireq = mempool_alloc(i2o_blk_req_pool.pool, GFP_ATOMIC); - if (!ireq) - return ERR_PTR(-ENOMEM); - - INIT_LIST_HEAD(&ireq->queue); - sg_init_table(ireq->sg_table, I2O_MAX_PHYS_SEGMENTS); - - return ireq; -}; - -/** - * i2o_block_request_free - Frees a I2O block request - * @ireq: I2O block request which should be freed - * - * Frees the allocated memory (give it back to the request mempool). - */ -static inline void i2o_block_request_free(struct i2o_block_request *ireq) -{ - mempool_free(ireq, i2o_blk_req_pool.pool); -}; - -/** - * i2o_block_sglist_alloc - Allocate the SG list and map it - * @c: I2O controller to which the request belongs - * @ireq: I2O block request - * @mptr: message body pointer - * - * Builds the SG list and map it to be accessible by the controller. - * - * Returns 0 on failure or 1 on success. - */ -static inline int i2o_block_sglist_alloc(struct i2o_controller *c, - struct i2o_block_request *ireq, - u32 ** mptr) -{ - int nents; - enum dma_data_direction direction; - - ireq->dev = &c->pdev->dev; - nents = blk_rq_map_sg(ireq->req->q, ireq->req, ireq->sg_table); - - if (rq_data_dir(ireq->req) == READ) - direction = PCI_DMA_FROMDEVICE; - else - direction = PCI_DMA_TODEVICE; - - ireq->sg_nents = nents; - - return i2o_dma_map_sg(c, ireq->sg_table, nents, direction, mptr); -}; - -/** - * i2o_block_sglist_free - Frees the SG list - * @ireq: I2O block request from which the SG should be freed - * - * Frees the SG list from the I2O block request. - */ -static inline void i2o_block_sglist_free(struct i2o_block_request *ireq) -{ - enum dma_data_direction direction; - - if (rq_data_dir(ireq->req) == READ) - direction = PCI_DMA_FROMDEVICE; - else - direction = PCI_DMA_TODEVICE; - - dma_unmap_sg(ireq->dev, ireq->sg_table, ireq->sg_nents, direction); -}; - -/** - * i2o_block_prep_req_fn - Allocates I2O block device specific struct - * @q: request queue for the request - * @req: the request to prepare - * - * Allocate the necessary i2o_block_request struct and connect it to - * the request. This is needed that we not lose the SG list later on. - * - * Returns BLKPREP_OK on success or BLKPREP_DEFER on failure. - */ -static int i2o_block_prep_req_fn(struct request_queue *q, struct request *req) -{ - struct i2o_block_device *i2o_blk_dev = q->queuedata; - struct i2o_block_request *ireq; - - if (unlikely(!i2o_blk_dev)) { - osm_err("block device already removed\n"); - return BLKPREP_KILL; - } - - /* connect the i2o_block_request to the request */ - if (!req->special) { - ireq = i2o_block_request_alloc(); - if (IS_ERR(ireq)) { - osm_debug("unable to allocate i2o_block_request!\n"); - return BLKPREP_DEFER; - } - - ireq->i2o_blk_dev = i2o_blk_dev; - req->special = ireq; - ireq->req = req; - } - /* do not come back here */ - req->cmd_flags |= REQ_DONTPREP; - - return BLKPREP_OK; -}; - -/** - * i2o_block_delayed_request_fn - delayed request queue function - * @work: the delayed request with the queue to start - * - * If the request queue is stopped for a disk, and there is no open - * request, a new event is created, which calls this function to start - * the queue after I2O_BLOCK_REQUEST_TIME. Otherwise the queue will never - * be started again. - */ -static void i2o_block_delayed_request_fn(struct work_struct *work) -{ - struct i2o_block_delayed_request *dreq = - container_of(work, struct i2o_block_delayed_request, - work.work); - struct request_queue *q = dreq->queue; - unsigned long flags; - - spin_lock_irqsave(q->queue_lock, flags); - blk_start_queue(q); - spin_unlock_irqrestore(q->queue_lock, flags); - kfree(dreq); -}; - -/** - * i2o_block_end_request - Post-processing of completed commands - * @req: request which should be completed - * @error: 0 for success, < 0 for error - * @nr_bytes: number of bytes to complete - * - * Mark the request as complete. The lock must not be held when entering. - * - */ -static void i2o_block_end_request(struct request *req, int error, - int nr_bytes) -{ - struct i2o_block_request *ireq = req->special; - struct i2o_block_device *dev = ireq->i2o_blk_dev; - struct request_queue *q = req->q; - unsigned long flags; - - if (blk_end_request(req, error, nr_bytes)) - if (error) - blk_end_request_all(req, -EIO); - - spin_lock_irqsave(q->queue_lock, flags); - - if (likely(dev)) { - dev->open_queue_depth--; - list_del(&ireq->queue); - } - - blk_start_queue(q); - - spin_unlock_irqrestore(q->queue_lock, flags); - - i2o_block_sglist_free(ireq); - i2o_block_request_free(ireq); -}; - -/** - * i2o_block_reply - Block OSM reply handler. - * @c: I2O controller from which the message arrives - * @m: message id of reply - * @msg: the actual I2O message reply - * - * This function gets all the message replies. - * - */ -static int i2o_block_reply(struct i2o_controller *c, u32 m, - struct i2o_message *msg) -{ - struct request *req; - int error = 0; - - req = i2o_cntxt_list_get(c, le32_to_cpu(msg->u.s.tcntxt)); - if (unlikely(!req)) { - osm_err("NULL reply received!\n"); - return -1; - } - - /* - * Lets see what is cooking. We stuffed the - * request in the context. - */ - - if ((le32_to_cpu(msg->body[0]) >> 24) != 0) { - u32 status = le32_to_cpu(msg->body[0]); - /* - * Device not ready means two things. One is that the - * the thing went offline (but not a removal media) - * - * The second is that you have a SuperTrak 100 and the - * firmware got constipated. Unlike standard i2o card - * setups the supertrak returns an error rather than - * blocking for the timeout in these cases. - * - * Don't stick a supertrak100 into cache aggressive modes - */ - - osm_err("TID %03x error status: 0x%02x, detailed status: " - "0x%04x\n", (le32_to_cpu(msg->u.head[1]) >> 12 & 0xfff), - status >> 24, status & 0xffff); - - req->errors++; - - error = -EIO; - } - - i2o_block_end_request(req, error, le32_to_cpu(msg->body[1])); - - return 1; -}; - -static void i2o_block_event(struct work_struct *work) -{ - struct i2o_event *evt = container_of(work, struct i2o_event, work); - osm_debug("event received\n"); - kfree(evt); -}; - -/* - * SCSI-CAM for ioctl geometry mapping - * Duplicated with SCSI - this should be moved into somewhere common - * perhaps genhd ? - * - * LBA -> CHS mapping table taken from: - * - * "Incorporating the I2O Architecture into BIOS for Intel Architecture - * Platforms" - * - * This is an I2O document that is only available to I2O members, - * not developers. - * - * From my understanding, this is how all the I2O cards do this - * - * Disk Size | Sectors | Heads | Cylinders - * ---------------+---------+-------+------------------- - * 1 < X <= 528M | 63 | 16 | X/(63 * 16 * 512) - * 528M < X <= 1G | 63 | 32 | X/(63 * 32 * 512) - * 1 < X <528M | 63 | 16 | X/(63 * 16 * 512) - * 1 < X <528M | 63 | 16 | X/(63 * 16 * 512) - * - */ -#define BLOCK_SIZE_528M 1081344 -#define BLOCK_SIZE_1G 2097152 -#define BLOCK_SIZE_21G 4403200 -#define BLOCK_SIZE_42G 8806400 -#define BLOCK_SIZE_84G 17612800 - -static void i2o_block_biosparam(unsigned long capacity, unsigned short *cyls, - unsigned char *hds, unsigned char *secs) -{ - unsigned long heads, sectors, cylinders; - - sectors = 63L; /* Maximize sectors per track */ - if (capacity <= BLOCK_SIZE_528M) - heads = 16; - else if (capacity <= BLOCK_SIZE_1G) - heads = 32; - else if (capacity <= BLOCK_SIZE_21G) - heads = 64; - else if (capacity <= BLOCK_SIZE_42G) - heads = 128; - else - heads = 255; - - cylinders = (unsigned long)capacity / (heads * sectors); - - *cyls = (unsigned short)cylinders; /* Stuff return values */ - *secs = (unsigned char)sectors; - *hds = (unsigned char)heads; -} - -/** - * i2o_block_open - Open the block device - * @bdev: block device being opened - * @mode: file open mode - * - * Power up the device, mount and lock the media. This function is called, - * if the block device is opened for access. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_block_open(struct block_device *bdev, fmode_t mode) -{ - struct i2o_block_device *dev = bdev->bd_disk->private_data; - - if (!dev->i2o_dev) - return -ENODEV; - - mutex_lock(&i2o_block_mutex); - if (dev->power > 0x1f) - i2o_block_device_power(dev, 0x02); - - i2o_block_device_mount(dev->i2o_dev, -1); - - i2o_block_device_lock(dev->i2o_dev, -1); - - osm_debug("Ready.\n"); - mutex_unlock(&i2o_block_mutex); - - return 0; -}; - -/** - * i2o_block_release - Release the I2O block device - * @disk: gendisk device being released - * @mode: file open mode - * - * Unlock and unmount the media, and power down the device. Gets called if - * the block device is closed. - */ -static void i2o_block_release(struct gendisk *disk, fmode_t mode) -{ - struct i2o_block_device *dev = disk->private_data; - u8 operation; - - /* - * This is to deal with the case of an application - * opening a device and then the device disappears while - * it's in use, and then the application tries to release - * it. ex: Unmounting a deleted RAID volume at reboot. - * If we send messages, it will just cause FAILs since - * the TID no longer exists. - */ - if (!dev->i2o_dev) - return; - - mutex_lock(&i2o_block_mutex); - i2o_block_device_flush(dev->i2o_dev); - - i2o_block_device_unlock(dev->i2o_dev, -1); - - if (dev->flags & (1 << 3 | 1 << 4)) /* Removable */ - operation = 0x21; - else - operation = 0x24; - - i2o_block_device_power(dev, operation); - mutex_unlock(&i2o_block_mutex); -} - -static int i2o_block_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - i2o_block_biosparam(get_capacity(bdev->bd_disk), - &geo->cylinders, &geo->heads, &geo->sectors); - return 0; -} - -/** - * i2o_block_ioctl - Issue device specific ioctl calls. - * @bdev: block device being opened - * @mode: file open mode - * @cmd: ioctl command - * @arg: arg - * - * Handles ioctl request for the block device. - * - * Return 0 on success or negative error on failure. - */ -static int i2o_block_ioctl(struct block_device *bdev, fmode_t mode, - unsigned int cmd, unsigned long arg) -{ - struct gendisk *disk = bdev->bd_disk; - struct i2o_block_device *dev = disk->private_data; - int ret = -ENOTTY; - - /* Anyone capable of this syscall can do *real bad* things */ - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - mutex_lock(&i2o_block_mutex); - switch (cmd) { - case BLKI2OGRSTRAT: - ret = put_user(dev->rcache, (int __user *)arg); - break; - case BLKI2OGWSTRAT: - ret = put_user(dev->wcache, (int __user *)arg); - break; - case BLKI2OSRSTRAT: - ret = -EINVAL; - if (arg < 0 || arg > CACHE_SMARTFETCH) - break; - dev->rcache = arg; - ret = 0; - break; - case BLKI2OSWSTRAT: - ret = -EINVAL; - if (arg != 0 - && (arg < CACHE_WRITETHROUGH || arg > CACHE_SMARTBACK)) - break; - dev->wcache = arg; - ret = 0; - break; - } - mutex_unlock(&i2o_block_mutex); - - return ret; -}; - -/** - * i2o_block_check_events - Have we seen a media change? - * @disk: gendisk which should be verified - * @clearing: events being cleared - * - * Verifies if the media has changed. - * - * Returns 1 if the media was changed or 0 otherwise. - */ -static unsigned int i2o_block_check_events(struct gendisk *disk, - unsigned int clearing) -{ - struct i2o_block_device *p = disk->private_data; - - if (p->media_change_flag) { - p->media_change_flag = 0; - return DISK_EVENT_MEDIA_CHANGE; - } - return 0; -} - -/** - * i2o_block_transfer - Transfer a request to/from the I2O controller - * @req: the request which should be transferred - * - * This function converts the request into a I2O message. The necessary - * DMA buffers are allocated and after everything is setup post the message - * to the I2O controller. No cleanup is done by this function. It is done - * on the interrupt side when the reply arrives. - * - * Return 0 on success or negative error code on failure. - */ -static int i2o_block_transfer(struct request *req) -{ - struct i2o_block_device *dev = req->rq_disk->private_data; - struct i2o_controller *c; - u32 tid; - struct i2o_message *msg; - u32 *mptr; - struct i2o_block_request *ireq = req->special; - u32 tcntxt; - u32 sgl_offset = SGL_OFFSET_8; - u32 ctl_flags = 0x00000000; - int rc; - u32 cmd; - - if (unlikely(!dev->i2o_dev)) { - osm_err("transfer to removed drive\n"); - rc = -ENODEV; - goto exit; - } - - tid = dev->i2o_dev->lct_data.tid; - c = dev->i2o_dev->iop; - - msg = i2o_msg_get(c); - if (IS_ERR(msg)) { - rc = PTR_ERR(msg); - goto exit; - } - - tcntxt = i2o_cntxt_list_add(c, req); - if (!tcntxt) { - rc = -ENOMEM; - goto nop_msg; - } - - msg->u.s.icntxt = cpu_to_le32(i2o_block_driver.context); - msg->u.s.tcntxt = cpu_to_le32(tcntxt); - - mptr = &msg->body[0]; - - if (rq_data_dir(req) == READ) { - cmd = I2O_CMD_BLOCK_READ << 24; - - switch (dev->rcache) { - case CACHE_PREFETCH: - ctl_flags = 0x201F0008; - break; - - case CACHE_SMARTFETCH: - if (blk_rq_sectors(req) > 16) - ctl_flags = 0x201F0008; - else - ctl_flags = 0x001F0000; - break; - - default: - break; - } - } else { - cmd = I2O_CMD_BLOCK_WRITE << 24; - - switch (dev->wcache) { - case CACHE_WRITETHROUGH: - ctl_flags = 0x001F0008; - break; - case CACHE_WRITEBACK: - ctl_flags = 0x001F0010; - break; - case CACHE_SMARTBACK: - if (blk_rq_sectors(req) > 16) - ctl_flags = 0x001F0004; - else - ctl_flags = 0x001F0010; - break; - case CACHE_SMARTTHROUGH: - if (blk_rq_sectors(req) > 16) - ctl_flags = 0x001F0004; - else - ctl_flags = 0x001F0010; - default: - break; - } - } - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - u8 cmd[10]; - u32 scsi_flags; - u16 hwsec; - - hwsec = queue_logical_block_size(req->q) >> KERNEL_SECTOR_SHIFT; - memset(cmd, 0, 10); - - sgl_offset = SGL_OFFSET_12; - - msg->u.head[1] = - cpu_to_le32(I2O_CMD_PRIVATE << 24 | HOST_TID << 12 | tid); - - *mptr++ = cpu_to_le32(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC); - *mptr++ = cpu_to_le32(tid); - - /* - * ENABLE_DISCONNECT - * SIMPLE_TAG - * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME - */ - if (rq_data_dir(req) == READ) { - cmd[0] = READ_10; - scsi_flags = 0x60a0000a; - } else { - cmd[0] = WRITE_10; - scsi_flags = 0xa0a0000a; - } - - *mptr++ = cpu_to_le32(scsi_flags); - - *((u32 *) & cmd[2]) = cpu_to_be32(blk_rq_pos(req) * hwsec); - *((u16 *) & cmd[7]) = cpu_to_be16(blk_rq_sectors(req) * hwsec); - - memcpy(mptr, cmd, 10); - mptr += 4; - *mptr++ = cpu_to_le32(blk_rq_bytes(req)); - } else -#endif - { - msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid); - *mptr++ = cpu_to_le32(ctl_flags); - *mptr++ = cpu_to_le32(blk_rq_bytes(req)); - *mptr++ = - cpu_to_le32((u32) (blk_rq_pos(req) << KERNEL_SECTOR_SHIFT)); - *mptr++ = - cpu_to_le32(blk_rq_pos(req) >> (32 - KERNEL_SECTOR_SHIFT)); - } - - if (!i2o_block_sglist_alloc(c, ireq, &mptr)) { - rc = -ENOMEM; - goto context_remove; - } - - msg->u.head[0] = - cpu_to_le32(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset); - - list_add_tail(&ireq->queue, &dev->open_queue); - dev->open_queue_depth++; - - i2o_msg_post(c, msg); - - return 0; - -context_remove: - i2o_cntxt_list_remove(c, req); - -nop_msg: - i2o_msg_nop(c, msg); - -exit: - return rc; -}; - -/** - * i2o_block_request_fn - request queue handling function - * @q: request queue from which the request could be fetched - * - * Takes the next request from the queue, transfers it and if no error - * occurs dequeue it from the queue. On arrival of the reply the message - * will be processed further. If an error occurs requeue the request. - */ -static void i2o_block_request_fn(struct request_queue *q) -{ - struct request *req; - - while ((req = blk_peek_request(q)) != NULL) { - if (req->cmd_type == REQ_TYPE_FS) { - struct i2o_block_delayed_request *dreq; - struct i2o_block_request *ireq = req->special; - unsigned int queue_depth; - - queue_depth = ireq->i2o_blk_dev->open_queue_depth; - - if (queue_depth < I2O_BLOCK_MAX_OPEN_REQUESTS) { - if (!i2o_block_transfer(req)) { - blk_start_request(req); - continue; - } else - osm_info("transfer error\n"); - } - - if (queue_depth) - break; - - /* stop the queue and retry later */ - dreq = kmalloc(sizeof(*dreq), GFP_ATOMIC); - if (!dreq) - continue; - - dreq->queue = q; - INIT_DELAYED_WORK(&dreq->work, - i2o_block_delayed_request_fn); - - if (!queue_delayed_work(i2o_block_driver.event_queue, - &dreq->work, - I2O_BLOCK_RETRY_TIME)) - kfree(dreq); - else { - blk_stop_queue(q); - break; - } - } else { - blk_start_request(req); - __blk_end_request_all(req, -EIO); - } - } -}; - -/* I2O Block device operations definition */ -static const struct block_device_operations i2o_block_fops = { - .owner = THIS_MODULE, - .open = i2o_block_open, - .release = i2o_block_release, - .ioctl = i2o_block_ioctl, - .compat_ioctl = i2o_block_ioctl, - .getgeo = i2o_block_getgeo, - .check_events = i2o_block_check_events, -}; - -/** - * i2o_block_device_alloc - Allocate memory for a I2O Block device - * - * Allocate memory for the i2o_block_device struct, gendisk and request - * queue and initialize them as far as no additional information is needed. - * - * Returns a pointer to the allocated I2O Block device on success or a - * negative error code on failure. - */ -static struct i2o_block_device *i2o_block_device_alloc(void) -{ - struct i2o_block_device *dev; - struct gendisk *gd; - struct request_queue *queue; - int rc; - - dev = kzalloc(sizeof(*dev), GFP_KERNEL); - if (!dev) { - osm_err("Insufficient memory to allocate I2O Block disk.\n"); - rc = -ENOMEM; - goto exit; - } - - INIT_LIST_HEAD(&dev->open_queue); - spin_lock_init(&dev->lock); - dev->rcache = CACHE_PREFETCH; - dev->wcache = CACHE_WRITEBACK; - - /* allocate a gendisk with 16 partitions */ - gd = alloc_disk(16); - if (!gd) { - osm_err("Insufficient memory to allocate gendisk.\n"); - rc = -ENOMEM; - goto cleanup_dev; - } - - /* initialize the request queue */ - queue = blk_init_queue(i2o_block_request_fn, &dev->lock); - if (!queue) { - osm_err("Insufficient memory to allocate request queue.\n"); - rc = -ENOMEM; - goto cleanup_queue; - } - - blk_queue_prep_rq(queue, i2o_block_prep_req_fn); - - gd->major = I2O_MAJOR; - gd->queue = queue; - gd->fops = &i2o_block_fops; - gd->private_data = dev; - - dev->gd = gd; - - return dev; - -cleanup_queue: - put_disk(gd); - -cleanup_dev: - kfree(dev); - -exit: - return ERR_PTR(rc); -}; - -/** - * i2o_block_probe - verify if dev is a I2O Block device and install it - * @dev: device to verify if it is a I2O Block device - * - * We only verify if the user_tid of the device is 0xfff and then install - * the device. Otherwise it is used by some other device (e. g. RAID). - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_block_probe(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - struct i2o_controller *c = i2o_dev->iop; - struct i2o_block_device *i2o_blk_dev; - struct gendisk *gd; - struct request_queue *queue; - static int unit; - int rc; - u64 size; - u32 blocksize; - u16 body_size = 4; - u16 power; - unsigned short max_sectors; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) - body_size = 8; -#endif - - if (c->limit_sectors) - max_sectors = I2O_MAX_SECTORS_LIMITED; - else - max_sectors = I2O_MAX_SECTORS; - - /* skip devices which are used by IOP */ - if (i2o_dev->lct_data.user_tid != 0xfff) { - osm_debug("skipping used device %03x\n", i2o_dev->lct_data.tid); - return -ENODEV; - } - - if (i2o_device_claim(i2o_dev)) { - osm_warn("Unable to claim device. Installation aborted\n"); - rc = -EFAULT; - goto exit; - } - - i2o_blk_dev = i2o_block_device_alloc(); - if (IS_ERR(i2o_blk_dev)) { - osm_err("could not alloc a new I2O block device"); - rc = PTR_ERR(i2o_blk_dev); - goto claim_release; - } - - i2o_blk_dev->i2o_dev = i2o_dev; - dev_set_drvdata(dev, i2o_blk_dev); - - /* setup gendisk */ - gd = i2o_blk_dev->gd; - gd->first_minor = unit << 4; - sprintf(gd->disk_name, "i2o/hd%c", 'a' + unit); - gd->driverfs_dev = &i2o_dev->device; - - /* setup request queue */ - queue = gd->queue; - queue->queuedata = i2o_blk_dev; - - blk_queue_max_hw_sectors(queue, max_sectors); - blk_queue_max_segments(queue, i2o_sg_tablesize(c, body_size)); - - osm_debug("max sectors = %d\n", queue->max_sectors); - osm_debug("phys segments = %d\n", queue->max_phys_segments); - osm_debug("max hw segments = %d\n", queue->max_hw_segments); - - /* - * Ask for the current media data. If that isn't supported - * then we ask for the device capacity data - */ - if (!i2o_parm_field_get(i2o_dev, 0x0004, 1, &blocksize, 4) || - !i2o_parm_field_get(i2o_dev, 0x0000, 3, &blocksize, 4)) { - blk_queue_logical_block_size(queue, le32_to_cpu(blocksize)); - } else - osm_warn("unable to get blocksize of %s\n", gd->disk_name); - - if (!i2o_parm_field_get(i2o_dev, 0x0004, 0, &size, 8) || - !i2o_parm_field_get(i2o_dev, 0x0000, 4, &size, 8)) { - set_capacity(gd, le64_to_cpu(size) >> KERNEL_SECTOR_SHIFT); - } else - osm_warn("could not get size of %s\n", gd->disk_name); - - if (!i2o_parm_field_get(i2o_dev, 0x0000, 2, &power, 2)) - i2o_blk_dev->power = power; - - i2o_event_register(i2o_dev, &i2o_block_driver, 0, 0xffffffff); - - add_disk(gd); - - unit++; - - osm_info("device added (TID: %03x): %s\n", i2o_dev->lct_data.tid, - i2o_blk_dev->gd->disk_name); - - return 0; - -claim_release: - i2o_device_claim_release(i2o_dev); - -exit: - return rc; -}; - -/* Block OSM driver struct */ -static struct i2o_driver i2o_block_driver = { - .name = OSM_NAME, - .event = i2o_block_event, - .reply = i2o_block_reply, - .classes = i2o_block_class_id, - .driver = { - .probe = i2o_block_probe, - .remove = i2o_block_remove, - }, -}; - -/** - * i2o_block_init - Block OSM initialization function - * - * Allocate the slab and mempool for request structs, registers i2o_block - * block device and finally register the Block OSM in the I2O core. - * - * Returns 0 on success or negative error code on failure. - */ -static int __init i2o_block_init(void) -{ - int rc; - int size; - - printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - - /* Allocate request mempool and slab */ - size = sizeof(struct i2o_block_request); - i2o_blk_req_pool.slab = kmem_cache_create("i2o_block_req", size, 0, - SLAB_HWCACHE_ALIGN, NULL); - if (!i2o_blk_req_pool.slab) { - osm_err("can't init request slab\n"); - rc = -ENOMEM; - goto exit; - } - - i2o_blk_req_pool.pool = - mempool_create_slab_pool(I2O_BLOCK_REQ_MEMPOOL_SIZE, - i2o_blk_req_pool.slab); - if (!i2o_blk_req_pool.pool) { - osm_err("can't init request mempool\n"); - rc = -ENOMEM; - goto free_slab; - } - - /* Register the block device interfaces */ - rc = register_blkdev(I2O_MAJOR, "i2o_block"); - if (rc) { - osm_err("unable to register block device\n"); - goto free_mempool; - } -#ifdef MODULE - osm_info("registered device at major %d\n", I2O_MAJOR); -#endif - - /* Register Block OSM into I2O core */ - rc = i2o_driver_register(&i2o_block_driver); - if (rc) { - osm_err("Could not register Block driver\n"); - goto unregister_blkdev; - } - - return 0; - -unregister_blkdev: - unregister_blkdev(I2O_MAJOR, "i2o_block"); - -free_mempool: - mempool_destroy(i2o_blk_req_pool.pool); - -free_slab: - kmem_cache_destroy(i2o_blk_req_pool.slab); - -exit: - return rc; -}; - -/** - * i2o_block_exit - Block OSM exit function - * - * Unregisters Block OSM from I2O core, unregisters i2o_block block device - * and frees the mempool and slab. - */ -static void __exit i2o_block_exit(void) -{ - /* Unregister I2O Block OSM from I2O core */ - i2o_driver_unregister(&i2o_block_driver); - - /* Unregister block device */ - unregister_blkdev(I2O_MAJOR, "i2o_block"); - - /* Free request mempool and slab */ - mempool_destroy(i2o_blk_req_pool.pool); - kmem_cache_destroy(i2o_blk_req_pool.slab); -}; - -MODULE_AUTHOR("Red Hat"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION(OSM_DESCRIPTION); -MODULE_VERSION(OSM_VERSION); - -module_init(i2o_block_init); -module_exit(i2o_block_exit); diff --git a/drivers/staging/i2o/i2o_block.h b/drivers/staging/i2o/i2o_block.h deleted file mode 100644 index cf8873cbca3f..000000000000 --- a/drivers/staging/i2o/i2o_block.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Block OSM structures/API - * - * Copyright (C) 1999-2002 Red Hat Software - * - * Written by Alan Cox, Building Number Three Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * For the purpose of avoiding doubt the preferred form of the work - * for making modifications shall be a standards compliant form such - * gzipped tar and not one requiring a proprietary or patent encumbered - * tool to unpack. - * - * Fixes/additions: - * Steve Ralston: - * Multiple device handling error fixes, - * Added a queue depth. - * Alan Cox: - * FC920 has an rmw bug. Dont or in the end marker. - * Removed queue walk, fixed for 64bitness. - * Rewrote much of the code over time - * Added indirect block lists - * Handle 64K limits on many controllers - * Don't use indirects on the Promise (breaks) - * Heavily chop down the queue depths - * Deepak Saxena: - * Independent queues per IOP - * Support for dynamic device creation/deletion - * Code cleanup - * Support for larger I/Os through merge* functions - * (taken from DAC960 driver) - * Boji T Kannanthanam: - * Set the I2O Block devices to be detected in increasing - * order of TIDs during boot. - * Search and set the I2O block device that we boot off - * from as the first device to be claimed (as /dev/i2o/hda) - * Properly attach/detach I2O gendisk structure from the - * system gendisk list. The I2O block devices now appear in - * /proc/partitions. - * Markus Lidel : - * Minor bugfixes for 2.6. - */ - -#ifndef I2O_BLOCK_OSM_H -#define I2O_BLOCK_OSM_H - -#define I2O_BLOCK_RETRY_TIME HZ/4 -#define I2O_BLOCK_MAX_OPEN_REQUESTS 50 - -/* request queue sizes */ -#define I2O_BLOCK_REQ_MEMPOOL_SIZE 32 - -#define KERNEL_SECTOR_SHIFT 9 -#define KERNEL_SECTOR_SIZE (1 << KERNEL_SECTOR_SHIFT) - -/* I2O Block OSM mempool struct */ -struct i2o_block_mempool { - struct kmem_cache *slab; - mempool_t *pool; -}; - -/* I2O Block device descriptor */ -struct i2o_block_device { - struct i2o_device *i2o_dev; /* pointer to I2O device */ - struct gendisk *gd; - spinlock_t lock; /* queue lock */ - struct list_head open_queue; /* list of transferred, but unfinished - requests */ - unsigned int open_queue_depth; /* number of requests in the queue */ - - int rcache; /* read cache flags */ - int wcache; /* write cache flags */ - int flags; - u16 power; /* power state */ - int media_change_flag; /* media changed flag */ -}; - -/* I2O Block device request */ -struct i2o_block_request { - struct list_head queue; - struct request *req; /* corresponding request */ - struct i2o_block_device *i2o_blk_dev; /* I2O block device */ - struct device *dev; /* device used for DMA */ - int sg_nents; /* number of SG elements */ - struct scatterlist sg_table[I2O_MAX_PHYS_SEGMENTS]; /* SG table */ -}; - -/* I2O Block device delayed request */ -struct i2o_block_delayed_request { - struct delayed_work work; - struct request_queue *queue; -}; - -#endif diff --git a/drivers/staging/i2o/i2o_config.c b/drivers/staging/i2o/i2o_config.c deleted file mode 100644 index cd7ca5eb18ff..000000000000 --- a/drivers/staging/i2o/i2o_config.c +++ /dev/null @@ -1,1162 +0,0 @@ -/* - * I2O Configuration Interface Driver - * - * (C) Copyright 1999-2002 Red Hat - * - * Written by Alan Cox, Building Number Three Ltd - * - * Fixes/additions: - * Deepak Saxena (04/20/1999): - * Added basic ioctl() support - * Deepak Saxena (06/07/1999): - * Added software download ioctl (still testing) - * Auvo Häkkinen (09/10/1999): - * Changes to i2o_cfg_reply(), ioctl_parms() - * Added ioct_validate() - * Taneli Vähäkangas (09/30/1999): - * Fixed ioctl_swdl() - * Taneli Vähäkangas (10/04/1999): - * Changed ioctl_swdl(), implemented ioctl_swul() and ioctl_swdel() - * Deepak Saxena (11/18/1999): - * Added event managmenet support - * Alan Cox : - * 2.4 rewrite ported to 2.5 - * Markus Lidel : - * Added pass-thru support for Adaptec's raidutils - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include - -#include "core.h" - -#define SG_TABLESIZE 30 - -static DEFINE_MUTEX(i2o_cfg_mutex); -static long i2o_cfg_ioctl(struct file *, unsigned int, unsigned long); - -static spinlock_t i2o_config_lock; - -#define MODINC(x,y) ((x) = ((x) + 1) % (y)) - -struct sg_simple_element { - u32 flag_count; - u32 addr_bus; -}; - -struct i2o_cfg_info { - struct file *fp; - struct fasync_struct *fasync; - struct i2o_evt_info event_q[I2O_EVT_Q_LEN]; - u16 q_in; // Queue head index - u16 q_out; // Queue tail index - u16 q_len; // Queue length - u16 q_lost; // Number of lost events - ulong q_id; // Event queue ID...used as tx_context - struct i2o_cfg_info *next; -}; -static struct i2o_cfg_info *open_files = NULL; -static ulong i2o_cfg_info_id; - -static int i2o_cfg_getiops(unsigned long arg) -{ - struct i2o_controller *c; - u8 __user *user_iop_table = (void __user *)arg; - u8 tmp[MAX_I2O_CONTROLLERS]; - int ret = 0; - - memset(tmp, 0, MAX_I2O_CONTROLLERS); - - list_for_each_entry(c, &i2o_controllers, list) - tmp[c->unit] = 1; - - if (copy_to_user(user_iop_table, tmp, MAX_I2O_CONTROLLERS)) - ret = -EFAULT; - - return ret; -}; - -static int i2o_cfg_gethrt(unsigned long arg) -{ - struct i2o_controller *c; - struct i2o_cmd_hrtlct __user *cmd = (struct i2o_cmd_hrtlct __user *)arg; - struct i2o_cmd_hrtlct kcmd; - i2o_hrt *hrt; - int len; - u32 reslen; - int ret = 0; - - if (copy_from_user(&kcmd, cmd, sizeof(struct i2o_cmd_hrtlct))) - return -EFAULT; - - if (get_user(reslen, kcmd.reslen) < 0) - return -EFAULT; - - if (kcmd.resbuf == NULL) - return -EFAULT; - - c = i2o_find_iop(kcmd.iop); - if (!c) - return -ENXIO; - - hrt = (i2o_hrt *) c->hrt.virt; - - len = 8 + ((hrt->entry_len * hrt->num_entries) << 2); - - if (put_user(len, kcmd.reslen)) - ret = -EFAULT; - else if (len > reslen) - ret = -ENOBUFS; - else if (copy_to_user(kcmd.resbuf, (void *)hrt, len)) - ret = -EFAULT; - - return ret; -}; - -static int i2o_cfg_getlct(unsigned long arg) -{ - struct i2o_controller *c; - struct i2o_cmd_hrtlct __user *cmd = (struct i2o_cmd_hrtlct __user *)arg; - struct i2o_cmd_hrtlct kcmd; - i2o_lct *lct; - int len; - int ret = 0; - u32 reslen; - - if (copy_from_user(&kcmd, cmd, sizeof(struct i2o_cmd_hrtlct))) - return -EFAULT; - - if (get_user(reslen, kcmd.reslen) < 0) - return -EFAULT; - - if (kcmd.resbuf == NULL) - return -EFAULT; - - c = i2o_find_iop(kcmd.iop); - if (!c) - return -ENXIO; - - lct = (i2o_lct *) c->lct; - - len = (unsigned int)lct->table_size << 2; - if (put_user(len, kcmd.reslen)) - ret = -EFAULT; - else if (len > reslen) - ret = -ENOBUFS; - else if (copy_to_user(kcmd.resbuf, lct, len)) - ret = -EFAULT; - - return ret; -}; - -static int i2o_cfg_parms(unsigned long arg, unsigned int type) -{ - int ret = 0; - struct i2o_controller *c; - struct i2o_device *dev; - struct i2o_cmd_psetget __user *cmd = - (struct i2o_cmd_psetget __user *)arg; - struct i2o_cmd_psetget kcmd; - u32 reslen; - u8 *ops; - u8 *res; - int len = 0; - - u32 i2o_cmd = (type == I2OPARMGET ? - I2O_CMD_UTIL_PARAMS_GET : I2O_CMD_UTIL_PARAMS_SET); - - if (copy_from_user(&kcmd, cmd, sizeof(struct i2o_cmd_psetget))) - return -EFAULT; - - if (get_user(reslen, kcmd.reslen)) - return -EFAULT; - - c = i2o_find_iop(kcmd.iop); - if (!c) - return -ENXIO; - - dev = i2o_iop_find_device(c, kcmd.tid); - if (!dev) - return -ENXIO; - - /* - * Stop users being able to try and allocate arbitrary amounts - * of DMA space. 64K is way more than sufficient for this. - */ - if (kcmd.oplen > 65536) - return -EMSGSIZE; - - ops = memdup_user(kcmd.opbuf, kcmd.oplen); - if (IS_ERR(ops)) - return PTR_ERR(ops); - - /* - * It's possible to have a _very_ large table - * and that the user asks for all of it at once... - */ - res = kmalloc(65536, GFP_KERNEL); - if (!res) { - kfree(ops); - return -ENOMEM; - } - - len = i2o_parm_issue(dev, i2o_cmd, ops, kcmd.oplen, res, 65536); - kfree(ops); - - if (len < 0) { - kfree(res); - return -EAGAIN; - } - - if (put_user(len, kcmd.reslen)) - ret = -EFAULT; - else if (len > reslen) - ret = -ENOBUFS; - else if (copy_to_user(kcmd.resbuf, res, len)) - ret = -EFAULT; - - kfree(res); - - return ret; -}; - -static int i2o_cfg_swdl(unsigned long arg) -{ - struct i2o_sw_xfer kxfer; - struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; - unsigned char maxfrag = 0, curfrag = 1; - struct i2o_dma buffer; - struct i2o_message *msg; - unsigned int status = 0, swlen = 0, fragsize = 8192; - struct i2o_controller *c; - - if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer))) - return -EFAULT; - - if (get_user(swlen, kxfer.swlen) < 0) - return -EFAULT; - - if (get_user(maxfrag, kxfer.maxfrag) < 0) - return -EFAULT; - - if (get_user(curfrag, kxfer.curfrag) < 0) - return -EFAULT; - - if (curfrag == maxfrag) - fragsize = swlen - (maxfrag - 1) * 8192; - - if (!kxfer.buf || !access_ok(VERIFY_READ, kxfer.buf, fragsize)) - return -EFAULT; - - c = i2o_find_iop(kxfer.iop); - if (!c) - return -ENXIO; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - if (i2o_dma_alloc(&c->pdev->dev, &buffer, fragsize)) { - i2o_msg_nop(c, msg); - return -ENOMEM; - } - - if (__copy_from_user(buffer.virt, kxfer.buf, fragsize)) { - i2o_msg_nop(c, msg); - i2o_dma_free(&c->pdev->dev, &buffer); - return -EFAULT; - } - - msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_7); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_SW_DOWNLOAD << 24 | HOST_TID << 12 | - ADAPTER_TID); - msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); - msg->u.head[3] = cpu_to_le32(0); - msg->body[0] = - cpu_to_le32((((u32) kxfer.flags) << 24) | (((u32) kxfer. - sw_type) << 16) | - (((u32) maxfrag) << 8) | (((u32) curfrag))); - msg->body[1] = cpu_to_le32(swlen); - msg->body[2] = cpu_to_le32(kxfer.sw_id); - msg->body[3] = cpu_to_le32(0xD0000000 | fragsize); - msg->body[4] = cpu_to_le32(buffer.phys); - - osm_debug("swdl frag %d/%d (size %d)\n", curfrag, maxfrag, fragsize); - status = i2o_msg_post_wait_mem(c, msg, 60, &buffer); - - if (status != -ETIMEDOUT) - i2o_dma_free(&c->pdev->dev, &buffer); - - if (status != I2O_POST_WAIT_OK) { - // it fails if you try and send frags out of order - // and for some yet unknown reasons too - osm_info("swdl failed, DetailedStatus = %d\n", status); - return status; - } - - return 0; -}; - -static int i2o_cfg_swul(unsigned long arg) -{ - struct i2o_sw_xfer kxfer; - struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; - unsigned char maxfrag = 0, curfrag = 1; - struct i2o_dma buffer; - struct i2o_message *msg; - unsigned int status = 0, swlen = 0, fragsize = 8192; - struct i2o_controller *c; - int ret = 0; - - if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer))) - return -EFAULT; - - if (get_user(swlen, kxfer.swlen) < 0) - return -EFAULT; - - if (get_user(maxfrag, kxfer.maxfrag) < 0) - return -EFAULT; - - if (get_user(curfrag, kxfer.curfrag) < 0) - return -EFAULT; - - if (curfrag == maxfrag) - fragsize = swlen - (maxfrag - 1) * 8192; - - if (!kxfer.buf) - return -EFAULT; - - c = i2o_find_iop(kxfer.iop); - if (!c) - return -ENXIO; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - if (i2o_dma_alloc(&c->pdev->dev, &buffer, fragsize)) { - i2o_msg_nop(c, msg); - return -ENOMEM; - } - - msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_7); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_SW_UPLOAD << 24 | HOST_TID << 12 | ADAPTER_TID); - msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); - msg->u.head[3] = cpu_to_le32(0); - msg->body[0] = - cpu_to_le32((u32) kxfer.flags << 24 | (u32) kxfer. - sw_type << 16 | (u32) maxfrag << 8 | (u32) curfrag); - msg->body[1] = cpu_to_le32(swlen); - msg->body[2] = cpu_to_le32(kxfer.sw_id); - msg->body[3] = cpu_to_le32(0xD0000000 | fragsize); - msg->body[4] = cpu_to_le32(buffer.phys); - - osm_debug("swul frag %d/%d (size %d)\n", curfrag, maxfrag, fragsize); - status = i2o_msg_post_wait_mem(c, msg, 60, &buffer); - - if (status != I2O_POST_WAIT_OK) { - if (status != -ETIMEDOUT) - i2o_dma_free(&c->pdev->dev, &buffer); - - osm_info("swul failed, DetailedStatus = %d\n", status); - return status; - } - - if (copy_to_user(kxfer.buf, buffer.virt, fragsize)) - ret = -EFAULT; - - i2o_dma_free(&c->pdev->dev, &buffer); - - return ret; -} - -static int i2o_cfg_swdel(unsigned long arg) -{ - struct i2o_controller *c; - struct i2o_sw_xfer kxfer; - struct i2o_sw_xfer __user *pxfer = (struct i2o_sw_xfer __user *)arg; - struct i2o_message *msg; - unsigned int swlen; - int token; - - if (copy_from_user(&kxfer, pxfer, sizeof(struct i2o_sw_xfer))) - return -EFAULT; - - if (get_user(swlen, kxfer.swlen) < 0) - return -EFAULT; - - c = i2o_find_iop(kxfer.iop); - if (!c) - return -ENXIO; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(SEVEN_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_SW_REMOVE << 24 | HOST_TID << 12 | ADAPTER_TID); - msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); - msg->u.head[3] = cpu_to_le32(0); - msg->body[0] = - cpu_to_le32((u32) kxfer.flags << 24 | (u32) kxfer.sw_type << 16); - msg->body[1] = cpu_to_le32(swlen); - msg->body[2] = cpu_to_le32(kxfer.sw_id); - - token = i2o_msg_post_wait(c, msg, 10); - - if (token != I2O_POST_WAIT_OK) { - osm_info("swdel failed, DetailedStatus = %d\n", token); - return -ETIMEDOUT; - } - - return 0; -}; - -static int i2o_cfg_validate(unsigned long arg) -{ - int token; - int iop = (int)arg; - struct i2o_message *msg; - struct i2o_controller *c; - - c = i2o_find_iop(iop); - if (!c) - return -ENXIO; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_CONFIG_VALIDATE << 24 | HOST_TID << 12 | iop); - msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); - msg->u.head[3] = cpu_to_le32(0); - - token = i2o_msg_post_wait(c, msg, 10); - - if (token != I2O_POST_WAIT_OK) { - osm_info("Can't validate configuration, ErrorStatus = %d\n", - token); - return -ETIMEDOUT; - } - - return 0; -}; - -static int i2o_cfg_evt_reg(unsigned long arg, struct file *fp) -{ - struct i2o_message *msg; - struct i2o_evt_id __user *pdesc = (struct i2o_evt_id __user *)arg; - struct i2o_evt_id kdesc; - struct i2o_controller *c; - struct i2o_device *d; - - if (copy_from_user(&kdesc, pdesc, sizeof(struct i2o_evt_id))) - return -EFAULT; - - /* IOP exists? */ - c = i2o_find_iop(kdesc.iop); - if (!c) - return -ENXIO; - - /* Device exists? */ - d = i2o_iop_find_device(c, kdesc.tid); - if (!d) - return -ENODEV; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | - kdesc.tid); - msg->u.head[2] = cpu_to_le32(i2o_config_driver.context); - msg->u.head[3] = cpu_to_le32(i2o_cntxt_list_add(c, fp->private_data)); - msg->body[0] = cpu_to_le32(kdesc.evt_mask); - - i2o_msg_post(c, msg); - - return 0; -} - -static int i2o_cfg_evt_get(unsigned long arg, struct file *fp) -{ - struct i2o_cfg_info *p = NULL; - struct i2o_evt_get __user *uget = (struct i2o_evt_get __user *)arg; - struct i2o_evt_get kget; - unsigned long flags; - - for (p = open_files; p; p = p->next) - if (p->q_id == (ulong) fp->private_data) - break; - - if (!p->q_len) - return -ENOENT; - - memcpy(&kget.info, &p->event_q[p->q_out], sizeof(struct i2o_evt_info)); - MODINC(p->q_out, I2O_EVT_Q_LEN); - spin_lock_irqsave(&i2o_config_lock, flags); - p->q_len--; - kget.pending = p->q_len; - kget.lost = p->q_lost; - spin_unlock_irqrestore(&i2o_config_lock, flags); - - if (copy_to_user(uget, &kget, sizeof(struct i2o_evt_get))) - return -EFAULT; - return 0; -} - -#ifdef CONFIG_COMPAT -static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, - unsigned long arg) -{ - struct i2o_cmd_passthru32 __user *cmd; - struct i2o_controller *c; - u32 __user *user_msg; - u32 *reply = NULL; - u32 __user *user_reply = NULL; - u32 size = 0; - u32 reply_size = 0; - u32 rcode = 0; - struct i2o_dma sg_list[SG_TABLESIZE]; - u32 sg_offset = 0; - u32 sg_count = 0; - u32 i = 0; - u32 sg_index = 0; - i2o_status_block *sb; - struct i2o_message *msg; - unsigned int iop; - - cmd = (struct i2o_cmd_passthru32 __user *)arg; - - if (get_user(iop, &cmd->iop) || get_user(i, &cmd->msg)) - return -EFAULT; - - user_msg = compat_ptr(i); - - c = i2o_find_iop(iop); - if (!c) { - osm_debug("controller %d not found\n", iop); - return -ENXIO; - } - - sb = c->status_block.virt; - - if (get_user(size, &user_msg[0])) { - osm_warn("unable to get size!\n"); - return -EFAULT; - } - size = size >> 16; - - if (size > sb->inbound_frame_size) { - osm_warn("size of message > inbound_frame_size"); - return -EFAULT; - } - - user_reply = &user_msg[size]; - - size <<= 2; // Convert to bytes - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - rcode = -EFAULT; - /* Copy in the user's I2O command */ - if (copy_from_user(msg, user_msg, size)) { - osm_warn("unable to copy user message\n"); - goto out; - } - i2o_dump_message(msg); - - if (get_user(reply_size, &user_reply[0]) < 0) - goto out; - - reply_size >>= 16; - reply_size <<= 2; - - rcode = -ENOMEM; - reply = kzalloc(reply_size, GFP_KERNEL); - if (!reply) { - printk(KERN_WARNING "%s: Could not allocate reply buffer\n", - c->name); - goto out; - } - - sg_offset = (msg->u.head[0] >> 4) & 0x0f; - - memset(sg_list, 0, sizeof(sg_list[0]) * SG_TABLESIZE); - if (sg_offset) { - struct sg_simple_element *sg; - - if (sg_offset * 4 >= size) { - rcode = -EFAULT; - goto cleanup; - } - // TODO 64bit fix - sg = (struct sg_simple_element *)((&msg->u.head[0]) + - sg_offset); - sg_count = - (size - sg_offset * 4) / sizeof(struct sg_simple_element); - if (sg_count > SG_TABLESIZE) { - printk(KERN_DEBUG "%s:IOCTL SG List too large (%u)\n", - c->name, sg_count); - rcode = -EINVAL; - goto cleanup; - } - - for (i = 0; i < sg_count; i++) { - int sg_size; - struct i2o_dma *p; - - if (!(sg[i].flag_count & 0x10000000 - /*I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT */ )) { - printk(KERN_DEBUG - "%s:Bad SG element %d - not simple (%x)\n", - c->name, i, sg[i].flag_count); - rcode = -EINVAL; - goto cleanup; - } - sg_size = sg[i].flag_count & 0xffffff; - p = &(sg_list[sg_index]); - /* Allocate memory for the transfer */ - if (i2o_dma_alloc(&c->pdev->dev, p, sg_size)) { - printk(KERN_DEBUG - "%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n", - c->name, sg_size, i, sg_count); - rcode = -ENOMEM; - goto sg_list_cleanup; - } - sg_index++; - /* Copy in the user's SG buffer if necessary */ - if (sg[i]. - flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR */ ) { - // TODO 64bit fix - if (copy_from_user - (p->virt, - (void __user *)(unsigned long)sg[i]. - addr_bus, sg_size)) { - printk(KERN_DEBUG - "%s: Could not copy SG buf %d FROM user\n", - c->name, i); - rcode = -EFAULT; - goto sg_list_cleanup; - } - } - //TODO 64bit fix - sg[i].addr_bus = (u32) p->phys; - } - } - - rcode = i2o_msg_post_wait(c, msg, 60); - msg = NULL; - if (rcode) { - reply[4] = ((u32) rcode) << 24; - goto sg_list_cleanup; - } - - if (sg_offset) { - u32 rmsg[I2O_OUTBOUND_MSG_FRAME_SIZE]; - /* Copy back the Scatter Gather buffers back to user space */ - u32 j; - // TODO 64bit fix - struct sg_simple_element *sg; - int sg_size; - - // re-acquire the original message to handle correctly the sg copy operation - memset(&rmsg, 0, I2O_OUTBOUND_MSG_FRAME_SIZE * 4); - // get user msg size in u32s - if (get_user(size, &user_msg[0])) { - rcode = -EFAULT; - goto sg_list_cleanup; - } - size = size >> 16; - size *= 4; - if (size > sizeof(rmsg)) { - rcode = -EINVAL; - goto sg_list_cleanup; - } - - /* Copy in the user's I2O command */ - if (copy_from_user(rmsg, user_msg, size)) { - rcode = -EFAULT; - goto sg_list_cleanup; - } - sg_count = - (size - sg_offset * 4) / sizeof(struct sg_simple_element); - - // TODO 64bit fix - sg = (struct sg_simple_element *)(rmsg + sg_offset); - for (j = 0; j < sg_count; j++) { - /* Copy out the SG list to user's buffer if necessary */ - if (! - (sg[j]. - flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR */ )) { - sg_size = sg[j].flag_count & 0xffffff; - // TODO 64bit fix - if (copy_to_user - ((void __user *)(u64) sg[j].addr_bus, - sg_list[j].virt, sg_size)) { - printk(KERN_WARNING - "%s: Could not copy %p TO user %x\n", - c->name, sg_list[j].virt, - sg[j].addr_bus); - rcode = -EFAULT; - goto sg_list_cleanup; - } - } - } - } - -sg_list_cleanup: - /* Copy back the reply to user space */ - if (reply_size) { - // we wrote our own values for context - now restore the user supplied ones - if (copy_from_user(reply + 2, user_msg + 2, sizeof(u32) * 2)) { - printk(KERN_WARNING - "%s: Could not copy message context FROM user\n", - c->name); - rcode = -EFAULT; - } - if (copy_to_user(user_reply, reply, reply_size)) { - printk(KERN_WARNING - "%s: Could not copy reply TO user\n", c->name); - rcode = -EFAULT; - } - } - for (i = 0; i < sg_index; i++) - i2o_dma_free(&c->pdev->dev, &sg_list[i]); - -cleanup: - kfree(reply); -out: - if (msg) - i2o_msg_nop(c, msg); - return rcode; -} - -static long i2o_cfg_compat_ioctl(struct file *file, unsigned cmd, - unsigned long arg) -{ - int ret; - switch (cmd) { - case I2OGETIOPS: - ret = i2o_cfg_ioctl(file, cmd, arg); - break; - case I2OPASSTHRU32: - mutex_lock(&i2o_cfg_mutex); - ret = i2o_cfg_passthru32(file, cmd, arg); - mutex_unlock(&i2o_cfg_mutex); - break; - default: - ret = -ENOIOCTLCMD; - break; - } - return ret; -} - -#endif - -#ifdef CONFIG_I2O_EXT_ADAPTEC -static int i2o_cfg_passthru(unsigned long arg) -{ - struct i2o_cmd_passthru __user *cmd = - (struct i2o_cmd_passthru __user *)arg; - struct i2o_controller *c; - u32 __user *user_msg; - u32 *reply = NULL; - u32 __user *user_reply = NULL; - u32 size = 0; - u32 reply_size = 0; - u32 rcode = 0; - struct i2o_dma sg_list[SG_TABLESIZE]; - u32 sg_offset = 0; - u32 sg_count = 0; - int sg_index = 0; - u32 i = 0; - i2o_status_block *sb; - struct i2o_message *msg; - unsigned int iop; - - if (get_user(iop, &cmd->iop) || get_user(user_msg, &cmd->msg)) - return -EFAULT; - - c = i2o_find_iop(iop); - if (!c) { - osm_warn("controller %d not found\n", iop); - return -ENXIO; - } - - sb = c->status_block.virt; - - if (get_user(size, &user_msg[0])) - return -EFAULT; - size = size >> 16; - - if (size > sb->inbound_frame_size) { - osm_warn("size of message > inbound_frame_size"); - return -EFAULT; - } - - user_reply = &user_msg[size]; - - size <<= 2; // Convert to bytes - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - rcode = -EFAULT; - /* Copy in the user's I2O command */ - if (copy_from_user(msg, user_msg, size)) - goto out; - - if (get_user(reply_size, &user_reply[0]) < 0) - goto out; - - reply_size >>= 16; - reply_size <<= 2; - - reply = kzalloc(reply_size, GFP_KERNEL); - if (!reply) { - printk(KERN_WARNING "%s: Could not allocate reply buffer\n", - c->name); - rcode = -ENOMEM; - goto out; - } - - sg_offset = (msg->u.head[0] >> 4) & 0x0f; - - memset(sg_list, 0, sizeof(sg_list[0]) * SG_TABLESIZE); - if (sg_offset) { - struct sg_simple_element *sg; - struct i2o_dma *p; - - if (sg_offset * 4 >= size) { - rcode = -EFAULT; - goto cleanup; - } - // TODO 64bit fix - sg = (struct sg_simple_element *)((&msg->u.head[0]) + - sg_offset); - sg_count = - (size - sg_offset * 4) / sizeof(struct sg_simple_element); - if (sg_count > SG_TABLESIZE) { - printk(KERN_DEBUG "%s:IOCTL SG List too large (%u)\n", - c->name, sg_count); - rcode = -EINVAL; - goto cleanup; - } - - for (i = 0; i < sg_count; i++) { - int sg_size; - - if (!(sg[i].flag_count & 0x10000000 - /*I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT */ )) { - printk(KERN_DEBUG - "%s:Bad SG element %d - not simple (%x)\n", - c->name, i, sg[i].flag_count); - rcode = -EINVAL; - goto sg_list_cleanup; - } - sg_size = sg[i].flag_count & 0xffffff; - p = &(sg_list[sg_index]); - if (i2o_dma_alloc(&c->pdev->dev, p, sg_size)) { - /* Allocate memory for the transfer */ - printk(KERN_DEBUG - "%s: Could not allocate SG buffer - size = %d buffer number %d of %d\n", - c->name, sg_size, i, sg_count); - rcode = -ENOMEM; - goto sg_list_cleanup; - } - sg_index++; - /* Copy in the user's SG buffer if necessary */ - if (sg[i]. - flag_count & 0x04000000 /*I2O_SGL_FLAGS_DIR */ ) { - // TODO 64bit fix - if (copy_from_user - (p->virt, (void __user *)sg[i].addr_bus, - sg_size)) { - printk(KERN_DEBUG - "%s: Could not copy SG buf %d FROM user\n", - c->name, i); - rcode = -EFAULT; - goto sg_list_cleanup; - } - } - sg[i].addr_bus = p->phys; - } - } - - rcode = i2o_msg_post_wait(c, msg, 60); - msg = NULL; - if (rcode) { - reply[4] = ((u32) rcode) << 24; - goto sg_list_cleanup; - } - - if (sg_offset) { - u32 rmsg[I2O_OUTBOUND_MSG_FRAME_SIZE]; - /* Copy back the Scatter Gather buffers back to user space */ - u32 j; - // TODO 64bit fix - struct sg_simple_element *sg; - int sg_size; - - // re-acquire the original message to handle correctly the sg copy operation - memset(&rmsg, 0, I2O_OUTBOUND_MSG_FRAME_SIZE * 4); - // get user msg size in u32s - if (get_user(size, &user_msg[0])) { - rcode = -EFAULT; - goto sg_list_cleanup; - } - size = size >> 16; - size *= 4; - if (size > sizeof(rmsg)) { - rcode = -EFAULT; - goto sg_list_cleanup; - } - - /* Copy in the user's I2O command */ - if (copy_from_user(rmsg, user_msg, size)) { - rcode = -EFAULT; - goto sg_list_cleanup; - } - sg_count = - (size - sg_offset * 4) / sizeof(struct sg_simple_element); - - // TODO 64bit fix - sg = (struct sg_simple_element *)(rmsg + sg_offset); - for (j = 0; j < sg_count; j++) { - /* Copy out the SG list to user's buffer if necessary */ - if (! - (sg[j]. - flag_count & 0x4000000 /*I2O_SGL_FLAGS_DIR */ )) { - sg_size = sg[j].flag_count & 0xffffff; - // TODO 64bit fix - if (copy_to_user - ((void __user *)sg[j].addr_bus, sg_list[j].virt, - sg_size)) { - printk(KERN_WARNING - "%s: Could not copy %p TO user %x\n", - c->name, sg_list[j].virt, - sg[j].addr_bus); - rcode = -EFAULT; - goto sg_list_cleanup; - } - } - } - } - -sg_list_cleanup: - /* Copy back the reply to user space */ - if (reply_size) { - // we wrote our own values for context - now restore the user supplied ones - if (copy_from_user(reply + 2, user_msg + 2, sizeof(u32) * 2)) { - printk(KERN_WARNING - "%s: Could not copy message context FROM user\n", - c->name); - rcode = -EFAULT; - } - if (copy_to_user(user_reply, reply, reply_size)) { - printk(KERN_WARNING - "%s: Could not copy reply TO user\n", c->name); - rcode = -EFAULT; - } - } - - for (i = 0; i < sg_index; i++) - i2o_dma_free(&c->pdev->dev, &sg_list[i]); - -cleanup: - kfree(reply); -out: - if (msg) - i2o_msg_nop(c, msg); - return rcode; -} -#endif - -/* - * IOCTL Handler - */ -static long i2o_cfg_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) -{ - int ret; - - mutex_lock(&i2o_cfg_mutex); - switch (cmd) { - case I2OGETIOPS: - ret = i2o_cfg_getiops(arg); - break; - - case I2OHRTGET: - ret = i2o_cfg_gethrt(arg); - break; - - case I2OLCTGET: - ret = i2o_cfg_getlct(arg); - break; - - case I2OPARMSET: - ret = i2o_cfg_parms(arg, I2OPARMSET); - break; - - case I2OPARMGET: - ret = i2o_cfg_parms(arg, I2OPARMGET); - break; - - case I2OSWDL: - ret = i2o_cfg_swdl(arg); - break; - - case I2OSWUL: - ret = i2o_cfg_swul(arg); - break; - - case I2OSWDEL: - ret = i2o_cfg_swdel(arg); - break; - - case I2OVALIDATE: - ret = i2o_cfg_validate(arg); - break; - - case I2OEVTREG: - ret = i2o_cfg_evt_reg(arg, fp); - break; - - case I2OEVTGET: - ret = i2o_cfg_evt_get(arg, fp); - break; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - case I2OPASSTHRU: - ret = i2o_cfg_passthru(arg); - break; -#endif - - default: - osm_debug("unknown ioctl called!\n"); - ret = -EINVAL; - } - mutex_unlock(&i2o_cfg_mutex); - return ret; -} - -static int cfg_open(struct inode *inode, struct file *file) -{ - struct i2o_cfg_info *tmp = kmalloc(sizeof(struct i2o_cfg_info), - GFP_KERNEL); - unsigned long flags; - - if (!tmp) - return -ENOMEM; - - mutex_lock(&i2o_cfg_mutex); - file->private_data = (void *)(i2o_cfg_info_id++); - tmp->fp = file; - tmp->fasync = NULL; - tmp->q_id = (ulong) file->private_data; - tmp->q_len = 0; - tmp->q_in = 0; - tmp->q_out = 0; - tmp->q_lost = 0; - tmp->next = open_files; - - spin_lock_irqsave(&i2o_config_lock, flags); - open_files = tmp; - spin_unlock_irqrestore(&i2o_config_lock, flags); - mutex_unlock(&i2o_cfg_mutex); - - return 0; -} - -static int cfg_fasync(int fd, struct file *fp, int on) -{ - ulong id = (ulong) fp->private_data; - struct i2o_cfg_info *p; - int ret = -EBADF; - - mutex_lock(&i2o_cfg_mutex); - for (p = open_files; p; p = p->next) - if (p->q_id == id) - break; - - if (p) - ret = fasync_helper(fd, fp, on, &p->fasync); - mutex_unlock(&i2o_cfg_mutex); - return ret; -} - -static int cfg_release(struct inode *inode, struct file *file) -{ - ulong id = (ulong) file->private_data; - struct i2o_cfg_info *p, **q; - unsigned long flags; - - mutex_lock(&i2o_cfg_mutex); - spin_lock_irqsave(&i2o_config_lock, flags); - for (q = &open_files; (p = *q) != NULL; q = &p->next) { - if (p->q_id == id) { - *q = p->next; - kfree(p); - break; - } - } - spin_unlock_irqrestore(&i2o_config_lock, flags); - mutex_unlock(&i2o_cfg_mutex); - - return 0; -} - -static const struct file_operations config_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .unlocked_ioctl = i2o_cfg_ioctl, -#ifdef CONFIG_COMPAT - .compat_ioctl = i2o_cfg_compat_ioctl, -#endif - .open = cfg_open, - .release = cfg_release, - .fasync = cfg_fasync, -}; - -static struct miscdevice i2o_miscdev = { - I2O_MINOR, - "i2octl", - &config_fops -}; - -static int __init i2o_config_old_init(void) -{ - spin_lock_init(&i2o_config_lock); - - if (misc_register(&i2o_miscdev) < 0) { - osm_err("can't register device.\n"); - return -EBUSY; - } - - return 0; -} - -static void i2o_config_old_exit(void) -{ - misc_deregister(&i2o_miscdev); -} - -MODULE_AUTHOR("Red Hat Software"); diff --git a/drivers/staging/i2o/i2o_proc.c b/drivers/staging/i2o/i2o_proc.c deleted file mode 100644 index 780fee3224ea..000000000000 --- a/drivers/staging/i2o/i2o_proc.c +++ /dev/null @@ -1,2049 +0,0 @@ -/* - * procfs handler for Linux I2O subsystem - * - * (c) Copyright 1999 Deepak Saxena - * - * Originally written by Deepak Saxena(deepak@plexity.net) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This is an initial test release. The code is based on the design of the - * ide procfs system (drivers/block/ide-proc.c). Some code taken from - * i2o-core module by Alan Cox. - * - * DISCLAIMER: This code is still under development/test and may cause - * your system to behave unpredictably. Use at your own discretion. - * - * - * Fixes/additions: - * Juha Sievänen (Juha.Sievanen@cs.Helsinki.FI), - * Auvo Häkkinen (Auvo.Hakkinen@cs.Helsinki.FI) - * University of Helsinki, Department of Computer Science - * LAN entries - * Markus Lidel - * Changes for new I2O API - */ - -#define OSM_NAME "proc-osm" -#define OSM_VERSION "1.316" -#define OSM_DESCRIPTION "I2O ProcFS OSM" - -#define I2O_MAX_MODULES 4 -// FIXME! -#define FMT_U64_HEX "0x%08x%08x" -#define U64_VAL(pu64) *((u32*)(pu64)+1), *((u32*)(pu64)) - -#include -#include -#include -#include "i2o.h" -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* Structure used to define /proc entries */ -typedef struct _i2o_proc_entry_t { - char *name; /* entry name */ - umode_t mode; /* mode */ - const struct file_operations *fops; /* open function */ -} i2o_proc_entry; - -/* global I2O /proc/i2o entry */ -static struct proc_dir_entry *i2o_proc_dir_root; - -/* proc OSM driver struct */ -static struct i2o_driver i2o_proc_driver = { - .name = OSM_NAME, -}; - -static int print_serial_number(struct seq_file *seq, u8 * serialno, int max_len) -{ - int i; - - /* 19990419 -sralston - * The I2O v1.5 (and v2.0 so far) "official specification" - * got serial numbers WRONG! - * Apparently, and despite what Section 3.4.4 says and - * Figure 3-35 shows (pg 3-39 in the pdf doc), - * the convention / consensus seems to be: - * + First byte is SNFormat - * + Second byte is SNLen (but only if SNFormat==7 (?)) - * + (v2.0) SCSI+BS may use IEEE Registered (64 or 128 bit) format - */ - switch (serialno[0]) { - case I2O_SNFORMAT_BINARY: /* Binary */ - seq_printf(seq, "0x"); - for (i = 0; i < serialno[1]; i++) - seq_printf(seq, "%02X", serialno[2 + i]); - break; - - case I2O_SNFORMAT_ASCII: /* ASCII */ - if (serialno[1] < ' ') { /* printable or SNLen? */ - /* sanity */ - max_len = - (max_len < serialno[1]) ? max_len : serialno[1]; - serialno[1 + max_len] = '\0'; - - /* just print it */ - seq_printf(seq, "%s", &serialno[2]); - } else { - /* print chars for specified length */ - for (i = 0; i < serialno[1]; i++) - seq_printf(seq, "%c", serialno[2 + i]); - } - break; - - case I2O_SNFORMAT_UNICODE: /* UNICODE */ - seq_printf(seq, "UNICODE Format. Can't Display\n"); - break; - - case I2O_SNFORMAT_LAN48_MAC: /* LAN-48 MAC Address */ - seq_printf(seq, "LAN-48 MAC address @ %pM", &serialno[2]); - break; - - case I2O_SNFORMAT_WAN: /* WAN MAC Address */ - /* FIXME: Figure out what a WAN access address looks like?? */ - seq_printf(seq, "WAN Access Address"); - break; - -/* plus new in v2.0 */ - case I2O_SNFORMAT_LAN64_MAC: /* LAN-64 MAC Address */ - /* FIXME: Figure out what a LAN-64 address really looks like?? */ - seq_printf(seq, - "LAN-64 MAC address @ [?:%02X:%02X:?] %pM", - serialno[8], serialno[9], &serialno[2]); - break; - - case I2O_SNFORMAT_DDM: /* I2O DDM */ - seq_printf(seq, - "DDM: Tid=%03Xh, Rsvd=%04Xh, OrgId=%04Xh", - *(u16 *) & serialno[2], - *(u16 *) & serialno[4], *(u16 *) & serialno[6]); - break; - - case I2O_SNFORMAT_IEEE_REG64: /* IEEE Registered (64-bit) */ - case I2O_SNFORMAT_IEEE_REG128: /* IEEE Registered (128-bit) */ - /* FIXME: Figure if this is even close?? */ - seq_printf(seq, - "IEEE NodeName(hi,lo)=(%08Xh:%08Xh), PortName(hi,lo)=(%08Xh:%08Xh)\n", - *(u32 *) & serialno[2], - *(u32 *) & serialno[6], - *(u32 *) & serialno[10], *(u32 *) & serialno[14]); - break; - - case I2O_SNFORMAT_UNKNOWN: /* Unknown 0 */ - case I2O_SNFORMAT_UNKNOWN2: /* Unknown 0xff */ - default: - seq_printf(seq, "Unknown data format (0x%02x)", serialno[0]); - break; - } - - return 0; -} - -/** - * i2o_get_class_name - do i2o class name lookup - * @class: class number - * - * Return a descriptive string for an i2o class. - */ -static const char *i2o_get_class_name(int class) -{ - int idx = 16; - static char *i2o_class_name[] = { - "Executive", - "Device Driver Module", - "Block Device", - "Tape Device", - "LAN Interface", - "WAN Interface", - "Fibre Channel Port", - "Fibre Channel Device", - "SCSI Device", - "ATE Port", - "ATE Device", - "Floppy Controller", - "Floppy Device", - "Secondary Bus Port", - "Peer Transport Agent", - "Peer Transport", - "Unknown" - }; - - switch (class & 0xfff) { - case I2O_CLASS_EXECUTIVE: - idx = 0; - break; - case I2O_CLASS_DDM: - idx = 1; - break; - case I2O_CLASS_RANDOM_BLOCK_STORAGE: - idx = 2; - break; - case I2O_CLASS_SEQUENTIAL_STORAGE: - idx = 3; - break; - case I2O_CLASS_LAN: - idx = 4; - break; - case I2O_CLASS_WAN: - idx = 5; - break; - case I2O_CLASS_FIBRE_CHANNEL_PORT: - idx = 6; - break; - case I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL: - idx = 7; - break; - case I2O_CLASS_SCSI_PERIPHERAL: - idx = 8; - break; - case I2O_CLASS_ATE_PORT: - idx = 9; - break; - case I2O_CLASS_ATE_PERIPHERAL: - idx = 10; - break; - case I2O_CLASS_FLOPPY_CONTROLLER: - idx = 11; - break; - case I2O_CLASS_FLOPPY_DEVICE: - idx = 12; - break; - case I2O_CLASS_BUS_ADAPTER: - idx = 13; - break; - case I2O_CLASS_PEER_TRANSPORT_AGENT: - idx = 14; - break; - case I2O_CLASS_PEER_TRANSPORT: - idx = 15; - break; - } - - return i2o_class_name[idx]; -} - -#define SCSI_TABLE_SIZE 13 -static char *scsi_devices[] = { - "Direct-Access Read/Write", - "Sequential-Access Storage", - "Printer", - "Processor", - "WORM Device", - "CD-ROM Device", - "Scanner Device", - "Optical Memory Device", - "Medium Changer Device", - "Communications Device", - "Graphics Art Pre-Press Device", - "Graphics Art Pre-Press Device", - "Array Controller Device" -}; - -static char *chtostr(char *tmp, u8 *chars, int n) -{ - tmp[0] = 0; - return strncat(tmp, (char *)chars, n); -} - -static int i2o_report_query_status(struct seq_file *seq, int block_status, - char *group) -{ - switch (block_status) { - case -ETIMEDOUT: - seq_printf(seq, "Timeout reading group %s.\n", group); - break; - case -ENOMEM: - seq_puts(seq, "No free memory to read the table.\n"); - break; - case -I2O_PARAMS_STATUS_INVALID_GROUP_ID: - seq_printf(seq, "Group %s not supported.\n", group); - break; - default: - seq_printf(seq, - "Error reading group %s. BlockStatus 0x%02X\n", - group, -block_status); - break; - } - - return 0; -} - -static char *bus_strings[] = { - "Local Bus", - "ISA", - "EISA", - "PCI", - "PCMCIA", - "NUBUS", - "CARDBUS" -}; - -static int i2o_seq_show_hrt(struct seq_file *seq, void *v) -{ - struct i2o_controller *c = (struct i2o_controller *)seq->private; - i2o_hrt *hrt = (i2o_hrt *) c->hrt.virt; - u32 bus; - int i; - - if (hrt->hrt_version) { - seq_printf(seq, - "HRT table for controller is too new a version.\n"); - return 0; - } - - seq_printf(seq, "HRT has %d entries of %d bytes each.\n", - hrt->num_entries, hrt->entry_len << 2); - - for (i = 0; i < hrt->num_entries; i++) { - seq_printf(seq, "Entry %d:\n", i); - seq_printf(seq, " Adapter ID: %0#10x\n", - hrt->hrt_entry[i].adapter_id); - seq_printf(seq, " Controlling tid: %0#6x\n", - hrt->hrt_entry[i].parent_tid); - - if (hrt->hrt_entry[i].bus_type != 0x80) { - bus = hrt->hrt_entry[i].bus_type; - seq_printf(seq, " %s Information\n", - bus_strings[bus]); - - switch (bus) { - case I2O_BUS_LOCAL: - seq_printf(seq, " IOBase: %0#6x,", - hrt->hrt_entry[i].bus.local_bus. - LbBaseIOPort); - seq_printf(seq, " MemoryBase: %0#10x\n", - hrt->hrt_entry[i].bus.local_bus. - LbBaseMemoryAddress); - break; - - case I2O_BUS_ISA: - seq_printf(seq, " IOBase: %0#6x,", - hrt->hrt_entry[i].bus.isa_bus. - IsaBaseIOPort); - seq_printf(seq, " MemoryBase: %0#10x,", - hrt->hrt_entry[i].bus.isa_bus. - IsaBaseMemoryAddress); - seq_printf(seq, " CSN: %0#4x,", - hrt->hrt_entry[i].bus.isa_bus.CSN); - break; - - case I2O_BUS_EISA: - seq_printf(seq, " IOBase: %0#6x,", - hrt->hrt_entry[i].bus.eisa_bus. - EisaBaseIOPort); - seq_printf(seq, " MemoryBase: %0#10x,", - hrt->hrt_entry[i].bus.eisa_bus. - EisaBaseMemoryAddress); - seq_printf(seq, " Slot: %0#4x,", - hrt->hrt_entry[i].bus.eisa_bus. - EisaSlotNumber); - break; - - case I2O_BUS_PCI: - seq_printf(seq, " Bus: %0#4x", - hrt->hrt_entry[i].bus.pci_bus. - PciBusNumber); - seq_printf(seq, " Dev: %0#4x", - hrt->hrt_entry[i].bus.pci_bus. - PciDeviceNumber); - seq_printf(seq, " Func: %0#4x", - hrt->hrt_entry[i].bus.pci_bus. - PciFunctionNumber); - seq_printf(seq, " Vendor: %0#6x", - hrt->hrt_entry[i].bus.pci_bus. - PciVendorID); - seq_printf(seq, " Device: %0#6x\n", - hrt->hrt_entry[i].bus.pci_bus. - PciDeviceID); - break; - - default: - seq_printf(seq, " Unsupported Bus Type\n"); - } - } else - seq_printf(seq, " Unknown Bus Type\n"); - } - - return 0; -} - -static int i2o_seq_show_lct(struct seq_file *seq, void *v) -{ - struct i2o_controller *c = (struct i2o_controller *)seq->private; - i2o_lct *lct = (i2o_lct *) c->lct; - int entries; - int i; - -#define BUS_TABLE_SIZE 3 - static char *bus_ports[] = { - "Generic Bus", - "SCSI Bus", - "Fibre Channel Bus" - }; - - entries = (lct->table_size - 3) / 9; - - seq_printf(seq, "LCT contains %d %s\n", entries, - entries == 1 ? "entry" : "entries"); - if (lct->boot_tid) - seq_printf(seq, "Boot Device @ ID %d\n", lct->boot_tid); - - seq_printf(seq, "Current Change Indicator: %#10x\n", lct->change_ind); - - for (i = 0; i < entries; i++) { - seq_printf(seq, "Entry %d\n", i); - seq_printf(seq, " Class, SubClass : %s", - i2o_get_class_name(lct->lct_entry[i].class_id)); - - /* - * Classes which we'll print subclass info for - */ - switch (lct->lct_entry[i].class_id & 0xFFF) { - case I2O_CLASS_RANDOM_BLOCK_STORAGE: - switch (lct->lct_entry[i].sub_class) { - case 0x00: - seq_printf(seq, ", Direct-Access Read/Write"); - break; - - case 0x04: - seq_printf(seq, ", WORM Drive"); - break; - - case 0x05: - seq_printf(seq, ", CD-ROM Drive"); - break; - - case 0x07: - seq_printf(seq, ", Optical Memory Device"); - break; - - default: - seq_printf(seq, ", Unknown (0x%02x)", - lct->lct_entry[i].sub_class); - break; - } - break; - - case I2O_CLASS_LAN: - switch (lct->lct_entry[i].sub_class & 0xFF) { - case 0x30: - seq_printf(seq, ", Ethernet"); - break; - - case 0x40: - seq_printf(seq, ", 100base VG"); - break; - - case 0x50: - seq_printf(seq, ", IEEE 802.5/Token-Ring"); - break; - - case 0x60: - seq_printf(seq, ", ANSI X3T9.5 FDDI"); - break; - - case 0x70: - seq_printf(seq, ", Fibre Channel"); - break; - - default: - seq_printf(seq, ", Unknown Sub-Class (0x%02x)", - lct->lct_entry[i].sub_class & 0xFF); - break; - } - break; - - case I2O_CLASS_SCSI_PERIPHERAL: - if (lct->lct_entry[i].sub_class < SCSI_TABLE_SIZE) - seq_printf(seq, ", %s", - scsi_devices[lct->lct_entry[i]. - sub_class]); - else - seq_printf(seq, ", Unknown Device Type"); - break; - - case I2O_CLASS_BUS_ADAPTER: - if (lct->lct_entry[i].sub_class < BUS_TABLE_SIZE) - seq_printf(seq, ", %s", - bus_ports[lct->lct_entry[i]. - sub_class]); - else - seq_printf(seq, ", Unknown Bus Type"); - break; - } - seq_printf(seq, "\n"); - - seq_printf(seq, " Local TID : 0x%03x\n", - lct->lct_entry[i].tid); - seq_printf(seq, " User TID : 0x%03x\n", - lct->lct_entry[i].user_tid); - seq_printf(seq, " Parent TID : 0x%03x\n", - lct->lct_entry[i].parent_tid); - seq_printf(seq, " Identity Tag : 0x%x%x%x%x%x%x%x%x\n", - lct->lct_entry[i].identity_tag[0], - lct->lct_entry[i].identity_tag[1], - lct->lct_entry[i].identity_tag[2], - lct->lct_entry[i].identity_tag[3], - lct->lct_entry[i].identity_tag[4], - lct->lct_entry[i].identity_tag[5], - lct->lct_entry[i].identity_tag[6], - lct->lct_entry[i].identity_tag[7]); - seq_printf(seq, " Change Indicator : %0#10x\n", - lct->lct_entry[i].change_ind); - seq_printf(seq, " Event Capab Mask : %0#10x\n", - lct->lct_entry[i].device_flags); - } - - return 0; -} - -static int i2o_seq_show_status(struct seq_file *seq, void *v) -{ - struct i2o_controller *c = (struct i2o_controller *)seq->private; - char prodstr[25]; - int version; - i2o_status_block *sb = c->status_block.virt; - - i2o_status_get(c); // reread the status block - - seq_printf(seq, "Organization ID : %0#6x\n", sb->org_id); - - version = sb->i2o_version; - -/* FIXME for Spec 2.0 - if (version == 0x02) { - seq_printf(seq, "Lowest I2O version supported: "); - switch(workspace[2]) { - case 0x00: - seq_printf(seq, "1.0\n"); - break; - case 0x01: - seq_printf(seq, "1.5\n"); - break; - case 0x02: - seq_printf(seq, "2.0\n"); - break; - } - - seq_printf(seq, "Highest I2O version supported: "); - switch(workspace[3]) { - case 0x00: - seq_printf(seq, "1.0\n"); - break; - case 0x01: - seq_printf(seq, "1.5\n"); - break; - case 0x02: - seq_printf(seq, "2.0\n"); - break; - } - } -*/ - seq_printf(seq, "IOP ID : %0#5x\n", sb->iop_id); - seq_printf(seq, "Host Unit ID : %0#6x\n", sb->host_unit_id); - seq_printf(seq, "Segment Number : %0#5x\n", sb->segment_number); - - seq_printf(seq, "I2O version : "); - switch (version) { - case 0x00: - seq_printf(seq, "1.0\n"); - break; - case 0x01: - seq_printf(seq, "1.5\n"); - break; - case 0x02: - seq_printf(seq, "2.0\n"); - break; - default: - seq_printf(seq, "Unknown version\n"); - } - - seq_printf(seq, "IOP State : "); - switch (sb->iop_state) { - case 0x01: - seq_printf(seq, "INIT\n"); - break; - - case 0x02: - seq_printf(seq, "RESET\n"); - break; - - case 0x04: - seq_printf(seq, "HOLD\n"); - break; - - case 0x05: - seq_printf(seq, "READY\n"); - break; - - case 0x08: - seq_printf(seq, "OPERATIONAL\n"); - break; - - case 0x10: - seq_printf(seq, "FAILED\n"); - break; - - case 0x11: - seq_printf(seq, "FAULTED\n"); - break; - - default: - seq_printf(seq, "Unknown\n"); - break; - } - - seq_printf(seq, "Messenger Type : "); - switch (sb->msg_type) { - case 0x00: - seq_printf(seq, "Memory mapped\n"); - break; - case 0x01: - seq_printf(seq, "Memory mapped only\n"); - break; - case 0x02: - seq_printf(seq, "Remote only\n"); - break; - case 0x03: - seq_printf(seq, "Memory mapped and remote\n"); - break; - default: - seq_printf(seq, "Unknown\n"); - } - - seq_printf(seq, "Inbound Frame Size : %d bytes\n", - sb->inbound_frame_size << 2); - seq_printf(seq, "Max Inbound Frames : %d\n", - sb->max_inbound_frames); - seq_printf(seq, "Current Inbound Frames : %d\n", - sb->cur_inbound_frames); - seq_printf(seq, "Max Outbound Frames : %d\n", - sb->max_outbound_frames); - - /* Spec doesn't say if NULL terminated or not... */ - memcpy(prodstr, sb->product_id, 24); - prodstr[24] = '\0'; - seq_printf(seq, "Product ID : %s\n", prodstr); - seq_printf(seq, "Expected LCT Size : %d bytes\n", - sb->expected_lct_size); - - seq_printf(seq, "IOP Capabilities\n"); - seq_printf(seq, " Context Field Size Support : "); - switch (sb->iop_capabilities & 0x0000003) { - case 0: - seq_printf(seq, "Supports only 32-bit context fields\n"); - break; - case 1: - seq_printf(seq, "Supports only 64-bit context fields\n"); - break; - case 2: - seq_printf(seq, "Supports 32-bit and 64-bit context fields, " - "but not concurrently\n"); - break; - case 3: - seq_printf(seq, "Supports 32-bit and 64-bit context fields " - "concurrently\n"); - break; - default: - seq_printf(seq, "0x%08x\n", sb->iop_capabilities); - } - seq_printf(seq, " Current Context Field Size : "); - switch (sb->iop_capabilities & 0x0000000C) { - case 0: - seq_printf(seq, "not configured\n"); - break; - case 4: - seq_printf(seq, "Supports only 32-bit context fields\n"); - break; - case 8: - seq_printf(seq, "Supports only 64-bit context fields\n"); - break; - case 12: - seq_printf(seq, "Supports both 32-bit or 64-bit context fields " - "concurrently\n"); - break; - default: - seq_printf(seq, "\n"); - } - seq_printf(seq, " Inbound Peer Support : %s\n", - (sb-> - iop_capabilities & 0x00000010) ? "Supported" : - "Not supported"); - seq_printf(seq, " Outbound Peer Support : %s\n", - (sb-> - iop_capabilities & 0x00000020) ? "Supported" : - "Not supported"); - seq_printf(seq, " Peer to Peer Support : %s\n", - (sb-> - iop_capabilities & 0x00000040) ? "Supported" : - "Not supported"); - - seq_printf(seq, "Desired private memory size : %d kB\n", - sb->desired_mem_size >> 10); - seq_printf(seq, "Allocated private memory size : %d kB\n", - sb->current_mem_size >> 10); - seq_printf(seq, "Private memory base address : %0#10x\n", - sb->current_mem_base); - seq_printf(seq, "Desired private I/O size : %d kB\n", - sb->desired_io_size >> 10); - seq_printf(seq, "Allocated private I/O size : %d kB\n", - sb->current_io_size >> 10); - seq_printf(seq, "Private I/O base address : %0#10x\n", - sb->current_io_base); - - return 0; -} - -static int i2o_seq_show_hw(struct seq_file *seq, void *v) -{ - struct i2o_controller *c = (struct i2o_controller *)seq->private; - static u32 work32[5]; - static u8 *work8 = (u8 *) work32; - static u16 *work16 = (u16 *) work32; - int token; - u32 hwcap; - - static char *cpu_table[] = { - "Intel 80960 series", - "AMD2900 series", - "Motorola 68000 series", - "ARM series", - "MIPS series", - "Sparc series", - "PowerPC series", - "Intel x86 series" - }; - - token = - i2o_parm_field_get(c->exec, 0x0000, -1, &work32, sizeof(work32)); - - if (token < 0) { - i2o_report_query_status(seq, token, "0x0000 IOP Hardware"); - return 0; - } - - seq_printf(seq, "I2O Vendor ID : %0#6x\n", work16[0]); - seq_printf(seq, "Product ID : %0#6x\n", work16[1]); - seq_printf(seq, "CPU : "); - if (work8[16] > 8) - seq_printf(seq, "Unknown\n"); - else - seq_printf(seq, "%s\n", cpu_table[work8[16]]); - /* Anyone using ProcessorVersion? */ - - seq_printf(seq, "RAM : %dkB\n", work32[1] >> 10); - seq_printf(seq, "Non-Volatile Mem : %dkB\n", work32[2] >> 10); - - hwcap = work32[3]; - seq_printf(seq, "Capabilities : 0x%08x\n", hwcap); - seq_printf(seq, " [%s] Self booting\n", - (hwcap & 0x00000001) ? "+" : "-"); - seq_printf(seq, " [%s] Upgradable IRTOS\n", - (hwcap & 0x00000002) ? "+" : "-"); - seq_printf(seq, " [%s] Supports downloading DDMs\n", - (hwcap & 0x00000004) ? "+" : "-"); - seq_printf(seq, " [%s] Supports installing DDMs\n", - (hwcap & 0x00000008) ? "+" : "-"); - seq_printf(seq, " [%s] Battery-backed RAM\n", - (hwcap & 0x00000010) ? "+" : "-"); - - return 0; -} - -/* Executive group 0003h - Executing DDM List (table) */ -static int i2o_seq_show_ddm_table(struct seq_file *seq, void *v) -{ - struct i2o_controller *c = (struct i2o_controller *)seq->private; - int token; - int i; - - typedef struct _i2o_exec_execute_ddm_table { - u16 ddm_tid; - u8 module_type; - u8 reserved; - u16 i2o_vendor_id; - u16 module_id; - u8 module_name_version[28]; - u32 data_size; - u32 code_size; - } i2o_exec_execute_ddm_table; - - struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - i2o_exec_execute_ddm_table ddm_table[I2O_MAX_MODULES]; - } *result; - - i2o_exec_execute_ddm_table ddm_table; - char tmp[28 + 1]; - - result = kmalloc(sizeof(*result), GFP_KERNEL); - if (!result) - return -ENOMEM; - - token = i2o_parm_table_get(c->exec, I2O_PARAMS_TABLE_GET, 0x0003, -1, - NULL, 0, result, sizeof(*result)); - - if (token < 0) { - i2o_report_query_status(seq, token, - "0x0003 Executing DDM List"); - goto out; - } - - seq_printf(seq, - "Tid Module_type Vendor Mod_id Module_name Vrs Data_size Code_size\n"); - ddm_table = result->ddm_table[0]; - - for (i = 0; i < result->row_count; ddm_table = result->ddm_table[++i]) { - seq_printf(seq, "0x%03x ", ddm_table.ddm_tid & 0xFFF); - - switch (ddm_table.module_type) { - case 0x01: - seq_printf(seq, "Downloaded DDM "); - break; - case 0x22: - seq_printf(seq, "Embedded DDM "); - break; - default: - seq_printf(seq, " "); - } - - seq_printf(seq, "%-#7x", ddm_table.i2o_vendor_id); - seq_printf(seq, "%-#8x", ddm_table.module_id); - seq_printf(seq, "%-29s", - chtostr(tmp, ddm_table.module_name_version, 28)); - seq_printf(seq, "%9d ", ddm_table.data_size); - seq_printf(seq, "%8d", ddm_table.code_size); - - seq_printf(seq, "\n"); - } - out: - kfree(result); - return 0; -} - -/* Executive group 0004h - Driver Store (scalar) */ -static int i2o_seq_show_driver_store(struct seq_file *seq, void *v) -{ - struct i2o_controller *c = (struct i2o_controller *)seq->private; - u32 work32[8]; - int token; - - token = - i2o_parm_field_get(c->exec, 0x0004, -1, &work32, sizeof(work32)); - if (token < 0) { - i2o_report_query_status(seq, token, "0x0004 Driver Store"); - return 0; - } - - seq_printf(seq, "Module limit : %d\n" - "Module count : %d\n" - "Current space : %d kB\n" - "Free space : %d kB\n", - work32[0], work32[1], work32[2] >> 10, work32[3] >> 10); - - return 0; -} - -/* Executive group 0005h - Driver Store Table (table) */ -static int i2o_seq_show_drivers_stored(struct seq_file *seq, void *v) -{ - typedef struct _i2o_driver_store { - u16 stored_ddm_index; - u8 module_type; - u8 reserved; - u16 i2o_vendor_id; - u16 module_id; - u8 module_name_version[28]; - u8 date[8]; - u32 module_size; - u32 mpb_size; - u32 module_flags; - } i2o_driver_store_table; - - struct i2o_controller *c = (struct i2o_controller *)seq->private; - int token; - int i; - - typedef struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - i2o_driver_store_table dst[I2O_MAX_MODULES]; - } i2o_driver_result_table; - - i2o_driver_result_table *result; - i2o_driver_store_table *dst; - char tmp[28 + 1]; - - result = kmalloc(sizeof(i2o_driver_result_table), GFP_KERNEL); - if (result == NULL) - return -ENOMEM; - - token = i2o_parm_table_get(c->exec, I2O_PARAMS_TABLE_GET, 0x0005, -1, - NULL, 0, result, sizeof(*result)); - - if (token < 0) { - i2o_report_query_status(seq, token, - "0x0005 DRIVER STORE TABLE"); - kfree(result); - return 0; - } - - seq_printf(seq, - "# Module_type Vendor Mod_id Module_name Vrs" - "Date Mod_size Par_size Flags\n"); - for (i = 0, dst = &result->dst[0]; i < result->row_count; - dst = &result->dst[++i]) { - seq_printf(seq, "%-3d", dst->stored_ddm_index); - switch (dst->module_type) { - case 0x01: - seq_printf(seq, "Downloaded DDM "); - break; - case 0x22: - seq_printf(seq, "Embedded DDM "); - break; - default: - seq_printf(seq, " "); - } - - seq_printf(seq, "%-#7x", dst->i2o_vendor_id); - seq_printf(seq, "%-#8x", dst->module_id); - seq_printf(seq, "%-29s", - chtostr(tmp, dst->module_name_version, 28)); - seq_printf(seq, "%-9s", chtostr(tmp, dst->date, 8)); - seq_printf(seq, "%8d ", dst->module_size); - seq_printf(seq, "%8d ", dst->mpb_size); - seq_printf(seq, "0x%04x", dst->module_flags); - seq_printf(seq, "\n"); - } - - kfree(result); - return 0; -} - -/* Generic group F000h - Params Descriptor (table) */ -static int i2o_seq_show_groups(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - int i; - u8 properties; - - typedef struct _i2o_group_info { - u16 group_number; - u16 field_count; - u16 row_count; - u8 properties; - u8 reserved; - } i2o_group_info; - - struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - i2o_group_info group[256]; - } *result; - - result = kmalloc(sizeof(*result), GFP_KERNEL); - if (!result) - return -ENOMEM; - - token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF000, -1, NULL, 0, - result, sizeof(*result)); - - if (token < 0) { - i2o_report_query_status(seq, token, "0xF000 Params Descriptor"); - goto out; - } - - seq_printf(seq, - "# Group FieldCount RowCount Type Add Del Clear\n"); - - for (i = 0; i < result->row_count; i++) { - seq_printf(seq, "%-3d", i); - seq_printf(seq, "0x%04X ", result->group[i].group_number); - seq_printf(seq, "%10d ", result->group[i].field_count); - seq_printf(seq, "%8d ", result->group[i].row_count); - - properties = result->group[i].properties; - if (properties & 0x1) - seq_printf(seq, "Table "); - else - seq_printf(seq, "Scalar "); - if (properties & 0x2) - seq_printf(seq, " + "); - else - seq_printf(seq, " - "); - if (properties & 0x4) - seq_printf(seq, " + "); - else - seq_printf(seq, " - "); - if (properties & 0x8) - seq_printf(seq, " + "); - else - seq_printf(seq, " - "); - - seq_printf(seq, "\n"); - } - - if (result->more_flag) - seq_printf(seq, "There is more...\n"); - out: - kfree(result); - return 0; -} - -/* Generic group F001h - Physical Device Table (table) */ -static int i2o_seq_show_phys_device(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - int i; - - struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - u32 adapter_id[64]; - } result; - - token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF001, -1, NULL, 0, - &result, sizeof(result)); - - if (token < 0) { - i2o_report_query_status(seq, token, - "0xF001 Physical Device Table"); - return 0; - } - - if (result.row_count) - seq_printf(seq, "# AdapterId\n"); - - for (i = 0; i < result.row_count; i++) { - seq_printf(seq, "%-2d", i); - seq_printf(seq, "%#7x\n", result.adapter_id[i]); - } - - if (result.more_flag) - seq_printf(seq, "There is more...\n"); - - return 0; -} - -/* Generic group F002h - Claimed Table (table) */ -static int i2o_seq_show_claimed(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - int i; - - struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - u16 claimed_tid[64]; - } result; - - token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF002, -1, NULL, 0, - &result, sizeof(result)); - - if (token < 0) { - i2o_report_query_status(seq, token, "0xF002 Claimed Table"); - return 0; - } - - if (result.row_count) - seq_printf(seq, "# ClaimedTid\n"); - - for (i = 0; i < result.row_count; i++) { - seq_printf(seq, "%-2d", i); - seq_printf(seq, "%#7x\n", result.claimed_tid[i]); - } - - if (result.more_flag) - seq_printf(seq, "There is more...\n"); - - return 0; -} - -/* Generic group F003h - User Table (table) */ -static int i2o_seq_show_users(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - int i; - - typedef struct _i2o_user_table { - u16 instance; - u16 user_tid; - u8 claim_type; - u8 reserved1; - u16 reserved2; - } i2o_user_table; - - struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - i2o_user_table user[64]; - } *result; - - result = kmalloc(sizeof(*result), GFP_KERNEL); - if (!result) - return -ENOMEM; - - token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF003, -1, NULL, 0, - result, sizeof(*result)); - - if (token < 0) { - i2o_report_query_status(seq, token, "0xF003 User Table"); - goto out; - } - - seq_printf(seq, "# Instance UserTid ClaimType\n"); - - for (i = 0; i < result->row_count; i++) { - seq_printf(seq, "%-3d", i); - seq_printf(seq, "%#8x ", result->user[i].instance); - seq_printf(seq, "%#7x ", result->user[i].user_tid); - seq_printf(seq, "%#9x\n", result->user[i].claim_type); - } - - if (result->more_flag) - seq_printf(seq, "There is more...\n"); - out: - kfree(result); - return 0; -} - -/* Generic group F005h - Private message extensions (table) (optional) */ -static int i2o_seq_show_priv_msgs(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - int i; - - typedef struct _i2o_private { - u16 ext_instance; - u16 organization_id; - u16 x_function_code; - } i2o_private; - - struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - i2o_private extension[64]; - } result; - - token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF000, -1, NULL, 0, - &result, sizeof(result)); - - if (token < 0) { - i2o_report_query_status(seq, token, - "0xF005 Private Message Extensions (optional)"); - return 0; - } - - seq_printf(seq, "Instance# OrgId FunctionCode\n"); - - for (i = 0; i < result.row_count; i++) { - seq_printf(seq, "%0#9x ", result.extension[i].ext_instance); - seq_printf(seq, "%0#6x ", result.extension[i].organization_id); - seq_printf(seq, "%0#6x", result.extension[i].x_function_code); - - seq_printf(seq, "\n"); - } - - if (result.more_flag) - seq_printf(seq, "There is more...\n"); - - return 0; -} - -/* Generic group F006h - Authorized User Table (table) */ -static int i2o_seq_show_authorized_users(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - int i; - - struct { - u16 result_count; - u16 pad; - u16 block_size; - u8 block_status; - u8 error_info_size; - u16 row_count; - u16 more_flag; - u32 alternate_tid[64]; - } result; - - token = i2o_parm_table_get(d, I2O_PARAMS_TABLE_GET, 0xF006, -1, NULL, 0, - &result, sizeof(result)); - - if (token < 0) { - i2o_report_query_status(seq, token, - "0xF006 Autohorized User Table"); - return 0; - } - - if (result.row_count) - seq_printf(seq, "# AlternateTid\n"); - - for (i = 0; i < result.row_count; i++) { - seq_printf(seq, "%-2d", i); - seq_printf(seq, "%#7x ", result.alternate_tid[i]); - } - - if (result.more_flag) - seq_printf(seq, "There is more...\n"); - - return 0; -} - -/* Generic group F100h - Device Identity (scalar) */ -static int i2o_seq_show_dev_identity(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - static u32 work32[128]; // allow for "stuff" + up to 256 byte (max) serial number - // == (allow) 512d bytes (max) - static u16 *work16 = (u16 *) work32; - int token; - char tmp[16 + 1]; - - token = i2o_parm_field_get(d, 0xF100, -1, &work32, sizeof(work32)); - - if (token < 0) { - i2o_report_query_status(seq, token, "0xF100 Device Identity"); - return 0; - } - - seq_printf(seq, "Device Class : %s\n", i2o_get_class_name(work16[0])); - seq_printf(seq, "Owner TID : %0#5x\n", work16[2]); - seq_printf(seq, "Parent TID : %0#5x\n", work16[3]); - seq_printf(seq, "Vendor info : %s\n", - chtostr(tmp, (u8 *) (work32 + 2), 16)); - seq_printf(seq, "Product info : %s\n", - chtostr(tmp, (u8 *) (work32 + 6), 16)); - seq_printf(seq, "Description : %s\n", - chtostr(tmp, (u8 *) (work32 + 10), 16)); - seq_printf(seq, "Product rev. : %s\n", - chtostr(tmp, (u8 *) (work32 + 14), 8)); - - seq_printf(seq, "Serial number : "); - print_serial_number(seq, (u8 *) (work32 + 16), - /* allow for SNLen plus - * possible trailing '\0' - */ - sizeof(work32) - (16 * sizeof(u32)) - 2); - seq_printf(seq, "\n"); - - return 0; -} - -static int i2o_seq_show_dev_name(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - - seq_printf(seq, "%s\n", dev_name(&d->device)); - - return 0; -} - -/* Generic group F101h - DDM Identity (scalar) */ -static int i2o_seq_show_ddm_identity(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - - struct { - u16 ddm_tid; - u8 module_name[24]; - u8 module_rev[8]; - u8 sn_format; - u8 serial_number[12]; - u8 pad[256]; // allow up to 256 byte (max) serial number - } result; - - char tmp[24 + 1]; - - token = i2o_parm_field_get(d, 0xF101, -1, &result, sizeof(result)); - - if (token < 0) { - i2o_report_query_status(seq, token, "0xF101 DDM Identity"); - return 0; - } - - seq_printf(seq, "Registering DDM TID : 0x%03x\n", result.ddm_tid); - seq_printf(seq, "Module name : %s\n", - chtostr(tmp, result.module_name, 24)); - seq_printf(seq, "Module revision : %s\n", - chtostr(tmp, result.module_rev, 8)); - - seq_printf(seq, "Serial number : "); - print_serial_number(seq, result.serial_number, sizeof(result) - 36); - /* allow for SNLen plus possible trailing '\0' */ - - seq_printf(seq, "\n"); - - return 0; -} - -/* Generic group F102h - User Information (scalar) */ -static int i2o_seq_show_uinfo(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - - struct { - u8 device_name[64]; - u8 service_name[64]; - u8 physical_location[64]; - u8 instance_number[4]; - } result; - - char tmp[64 + 1]; - - token = i2o_parm_field_get(d, 0xF102, -1, &result, sizeof(result)); - - if (token < 0) { - i2o_report_query_status(seq, token, "0xF102 User Information"); - return 0; - } - - seq_printf(seq, "Device name : %s\n", - chtostr(tmp, result.device_name, 64)); - seq_printf(seq, "Service name : %s\n", - chtostr(tmp, result.service_name, 64)); - seq_printf(seq, "Physical name : %s\n", - chtostr(tmp, result.physical_location, 64)); - seq_printf(seq, "Instance number : %s\n", - chtostr(tmp, result.instance_number, 4)); - - return 0; -} - -/* Generic group F103h - SGL Operating Limits (scalar) */ -static int i2o_seq_show_sgl_limits(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - static u32 work32[12]; - static u16 *work16 = (u16 *) work32; - static u8 *work8 = (u8 *) work32; - int token; - - token = i2o_parm_field_get(d, 0xF103, -1, &work32, sizeof(work32)); - - if (token < 0) { - i2o_report_query_status(seq, token, - "0xF103 SGL Operating Limits"); - return 0; - } - - seq_printf(seq, "SGL chain size : %d\n", work32[0]); - seq_printf(seq, "Max SGL chain size : %d\n", work32[1]); - seq_printf(seq, "SGL chain size target : %d\n", work32[2]); - seq_printf(seq, "SGL frag count : %d\n", work16[6]); - seq_printf(seq, "Max SGL frag count : %d\n", work16[7]); - seq_printf(seq, "SGL frag count target : %d\n", work16[8]); - -/* FIXME - if (d->i2oversion == 0x02) - { -*/ - seq_printf(seq, "SGL data alignment : %d\n", work16[8]); - seq_printf(seq, "SGL addr limit : %d\n", work8[20]); - seq_printf(seq, "SGL addr sizes supported : "); - if (work8[21] & 0x01) - seq_printf(seq, "32 bit "); - if (work8[21] & 0x02) - seq_printf(seq, "64 bit "); - if (work8[21] & 0x04) - seq_printf(seq, "96 bit "); - if (work8[21] & 0x08) - seq_printf(seq, "128 bit "); - seq_printf(seq, "\n"); -/* - } -*/ - - return 0; -} - -/* Generic group F200h - Sensors (scalar) */ -static int i2o_seq_show_sensors(struct seq_file *seq, void *v) -{ - struct i2o_device *d = (struct i2o_device *)seq->private; - int token; - - struct { - u16 sensor_instance; - u8 component; - u16 component_instance; - u8 sensor_class; - u8 sensor_type; - u8 scaling_exponent; - u32 actual_reading; - u32 minimum_reading; - u32 low2lowcat_treshold; - u32 lowcat2low_treshold; - u32 lowwarn2low_treshold; - u32 low2lowwarn_treshold; - u32 norm2lowwarn_treshold; - u32 lowwarn2norm_treshold; - u32 nominal_reading; - u32 hiwarn2norm_treshold; - u32 norm2hiwarn_treshold; - u32 high2hiwarn_treshold; - u32 hiwarn2high_treshold; - u32 hicat2high_treshold; - u32 hi2hicat_treshold; - u32 maximum_reading; - u8 sensor_state; - u16 event_enable; - } result; - - token = i2o_parm_field_get(d, 0xF200, -1, &result, sizeof(result)); - - if (token < 0) { - i2o_report_query_status(seq, token, - "0xF200 Sensors (optional)"); - return 0; - } - - seq_printf(seq, "Sensor instance : %d\n", result.sensor_instance); - - seq_printf(seq, "Component : %d = ", result.component); - switch (result.component) { - case 0: - seq_printf(seq, "Other"); - break; - case 1: - seq_printf(seq, "Planar logic Board"); - break; - case 2: - seq_printf(seq, "CPU"); - break; - case 3: - seq_printf(seq, "Chassis"); - break; - case 4: - seq_printf(seq, "Power Supply"); - break; - case 5: - seq_printf(seq, "Storage"); - break; - case 6: - seq_printf(seq, "External"); - break; - } - seq_printf(seq, "\n"); - - seq_printf(seq, "Component instance : %d\n", - result.component_instance); - seq_printf(seq, "Sensor class : %s\n", - result.sensor_class ? "Analog" : "Digital"); - - seq_printf(seq, "Sensor type : %d = ", result.sensor_type); - switch (result.sensor_type) { - case 0: - seq_printf(seq, "Other\n"); - break; - case 1: - seq_printf(seq, "Thermal\n"); - break; - case 2: - seq_printf(seq, "DC voltage (DC volts)\n"); - break; - case 3: - seq_printf(seq, "AC voltage (AC volts)\n"); - break; - case 4: - seq_printf(seq, "DC current (DC amps)\n"); - break; - case 5: - seq_printf(seq, "AC current (AC volts)\n"); - break; - case 6: - seq_printf(seq, "Door open\n"); - break; - case 7: - seq_printf(seq, "Fan operational\n"); - break; - } - - seq_printf(seq, "Scaling exponent : %d\n", - result.scaling_exponent); - seq_printf(seq, "Actual reading : %d\n", result.actual_reading); - seq_printf(seq, "Minimum reading : %d\n", result.minimum_reading); - seq_printf(seq, "Low2LowCat treshold : %d\n", - result.low2lowcat_treshold); - seq_printf(seq, "LowCat2Low treshold : %d\n", - result.lowcat2low_treshold); - seq_printf(seq, "LowWarn2Low treshold : %d\n", - result.lowwarn2low_treshold); - seq_printf(seq, "Low2LowWarn treshold : %d\n", - result.low2lowwarn_treshold); - seq_printf(seq, "Norm2LowWarn treshold : %d\n", - result.norm2lowwarn_treshold); - seq_printf(seq, "LowWarn2Norm treshold : %d\n", - result.lowwarn2norm_treshold); - seq_printf(seq, "Nominal reading : %d\n", result.nominal_reading); - seq_printf(seq, "HiWarn2Norm treshold : %d\n", - result.hiwarn2norm_treshold); - seq_printf(seq, "Norm2HiWarn treshold : %d\n", - result.norm2hiwarn_treshold); - seq_printf(seq, "High2HiWarn treshold : %d\n", - result.high2hiwarn_treshold); - seq_printf(seq, "HiWarn2High treshold : %d\n", - result.hiwarn2high_treshold); - seq_printf(seq, "HiCat2High treshold : %d\n", - result.hicat2high_treshold); - seq_printf(seq, "High2HiCat treshold : %d\n", - result.hi2hicat_treshold); - seq_printf(seq, "Maximum reading : %d\n", result.maximum_reading); - - seq_printf(seq, "Sensor state : %d = ", result.sensor_state); - switch (result.sensor_state) { - case 0: - seq_printf(seq, "Normal\n"); - break; - case 1: - seq_printf(seq, "Abnormal\n"); - break; - case 2: - seq_printf(seq, "Unknown\n"); - break; - case 3: - seq_printf(seq, "Low Catastrophic (LoCat)\n"); - break; - case 4: - seq_printf(seq, "Low (Low)\n"); - break; - case 5: - seq_printf(seq, "Low Warning (LoWarn)\n"); - break; - case 6: - seq_printf(seq, "High Warning (HiWarn)\n"); - break; - case 7: - seq_printf(seq, "High (High)\n"); - break; - case 8: - seq_printf(seq, "High Catastrophic (HiCat)\n"); - break; - } - - seq_printf(seq, "Event_enable : 0x%02X\n", result.event_enable); - seq_printf(seq, " [%s] Operational state change. \n", - (result.event_enable & 0x01) ? "+" : "-"); - seq_printf(seq, " [%s] Low catastrophic. \n", - (result.event_enable & 0x02) ? "+" : "-"); - seq_printf(seq, " [%s] Low reading. \n", - (result.event_enable & 0x04) ? "+" : "-"); - seq_printf(seq, " [%s] Low warning. \n", - (result.event_enable & 0x08) ? "+" : "-"); - seq_printf(seq, - " [%s] Change back to normal from out of range state. \n", - (result.event_enable & 0x10) ? "+" : "-"); - seq_printf(seq, " [%s] High warning. \n", - (result.event_enable & 0x20) ? "+" : "-"); - seq_printf(seq, " [%s] High reading. \n", - (result.event_enable & 0x40) ? "+" : "-"); - seq_printf(seq, " [%s] High catastrophic. \n", - (result.event_enable & 0x80) ? "+" : "-"); - - return 0; -} - -static int i2o_seq_open_hrt(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_hrt, PDE_DATA(inode)); -}; - -static int i2o_seq_open_lct(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_lct, PDE_DATA(inode)); -}; - -static int i2o_seq_open_status(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_status, PDE_DATA(inode)); -}; - -static int i2o_seq_open_hw(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_hw, PDE_DATA(inode)); -}; - -static int i2o_seq_open_ddm_table(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_ddm_table, PDE_DATA(inode)); -}; - -static int i2o_seq_open_driver_store(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_driver_store, PDE_DATA(inode)); -}; - -static int i2o_seq_open_drivers_stored(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_drivers_stored, PDE_DATA(inode)); -}; - -static int i2o_seq_open_groups(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_groups, PDE_DATA(inode)); -}; - -static int i2o_seq_open_phys_device(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_phys_device, PDE_DATA(inode)); -}; - -static int i2o_seq_open_claimed(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_claimed, PDE_DATA(inode)); -}; - -static int i2o_seq_open_users(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_users, PDE_DATA(inode)); -}; - -static int i2o_seq_open_priv_msgs(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_priv_msgs, PDE_DATA(inode)); -}; - -static int i2o_seq_open_authorized_users(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_authorized_users, - PDE_DATA(inode)); -}; - -static int i2o_seq_open_dev_identity(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_dev_identity, PDE_DATA(inode)); -}; - -static int i2o_seq_open_ddm_identity(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_ddm_identity, PDE_DATA(inode)); -}; - -static int i2o_seq_open_uinfo(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_uinfo, PDE_DATA(inode)); -}; - -static int i2o_seq_open_sgl_limits(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_sgl_limits, PDE_DATA(inode)); -}; - -static int i2o_seq_open_sensors(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_sensors, PDE_DATA(inode)); -}; - -static int i2o_seq_open_dev_name(struct inode *inode, struct file *file) -{ - return single_open(file, i2o_seq_show_dev_name, PDE_DATA(inode)); -}; - -static const struct file_operations i2o_seq_fops_lct = { - .open = i2o_seq_open_lct, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_hrt = { - .open = i2o_seq_open_hrt, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_status = { - .open = i2o_seq_open_status, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_hw = { - .open = i2o_seq_open_hw, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_ddm_table = { - .open = i2o_seq_open_ddm_table, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_driver_store = { - .open = i2o_seq_open_driver_store, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_drivers_stored = { - .open = i2o_seq_open_drivers_stored, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_groups = { - .open = i2o_seq_open_groups, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_phys_device = { - .open = i2o_seq_open_phys_device, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_claimed = { - .open = i2o_seq_open_claimed, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_users = { - .open = i2o_seq_open_users, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_priv_msgs = { - .open = i2o_seq_open_priv_msgs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_authorized_users = { - .open = i2o_seq_open_authorized_users, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_dev_name = { - .open = i2o_seq_open_dev_name, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_dev_identity = { - .open = i2o_seq_open_dev_identity, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_ddm_identity = { - .open = i2o_seq_open_ddm_identity, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_uinfo = { - .open = i2o_seq_open_uinfo, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_sgl_limits = { - .open = i2o_seq_open_sgl_limits, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations i2o_seq_fops_sensors = { - .open = i2o_seq_open_sensors, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -/* - * IOP specific entries...write field just in case someone - * ever wants one. - */ -static i2o_proc_entry i2o_proc_generic_iop_entries[] = { - {"hrt", S_IFREG | S_IRUGO, &i2o_seq_fops_hrt}, - {"lct", S_IFREG | S_IRUGO, &i2o_seq_fops_lct}, - {"status", S_IFREG | S_IRUGO, &i2o_seq_fops_status}, - {"hw", S_IFREG | S_IRUGO, &i2o_seq_fops_hw}, - {"ddm_table", S_IFREG | S_IRUGO, &i2o_seq_fops_ddm_table}, - {"driver_store", S_IFREG | S_IRUGO, &i2o_seq_fops_driver_store}, - {"drivers_stored", S_IFREG | S_IRUGO, &i2o_seq_fops_drivers_stored}, - {NULL, 0, NULL} -}; - -/* - * Device specific entries - */ -static i2o_proc_entry generic_dev_entries[] = { - {"groups", S_IFREG | S_IRUGO, &i2o_seq_fops_groups}, - {"phys_dev", S_IFREG | S_IRUGO, &i2o_seq_fops_phys_device}, - {"claimed", S_IFREG | S_IRUGO, &i2o_seq_fops_claimed}, - {"users", S_IFREG | S_IRUGO, &i2o_seq_fops_users}, - {"priv_msgs", S_IFREG | S_IRUGO, &i2o_seq_fops_priv_msgs}, - {"authorized_users", S_IFREG | S_IRUGO, &i2o_seq_fops_authorized_users}, - {"dev_identity", S_IFREG | S_IRUGO, &i2o_seq_fops_dev_identity}, - {"ddm_identity", S_IFREG | S_IRUGO, &i2o_seq_fops_ddm_identity}, - {"user_info", S_IFREG | S_IRUGO, &i2o_seq_fops_uinfo}, - {"sgl_limits", S_IFREG | S_IRUGO, &i2o_seq_fops_sgl_limits}, - {"sensors", S_IFREG | S_IRUGO, &i2o_seq_fops_sensors}, - {NULL, 0, NULL} -}; - -/* - * Storage unit specific entries (SCSI Periph, BS) with device names - */ -static i2o_proc_entry rbs_dev_entries[] = { - {"dev_name", S_IFREG | S_IRUGO, &i2o_seq_fops_dev_name}, - {NULL, 0, NULL} -}; - -/** - * i2o_proc_create_entries - Creates proc dir entries - * @dir: proc dir entry under which the entries should be placed - * @i2o_pe: pointer to the entries which should be added - * @data: pointer to I2O controller or device - * - * Create proc dir entries for a I2O controller or I2O device. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_proc_create_entries(struct proc_dir_entry *dir, - i2o_proc_entry * i2o_pe, void *data) -{ - struct proc_dir_entry *tmp; - - while (i2o_pe->name) { - tmp = proc_create_data(i2o_pe->name, i2o_pe->mode, dir, - i2o_pe->fops, data); - if (!tmp) - return -1; - - i2o_pe++; - } - - return 0; -} - -/** - * i2o_proc_device_add - Add an I2O device to the proc dir - * @dir: proc dir entry to which the device should be added - * @dev: I2O device which should be added - * - * Add an I2O device to the proc dir entry dir and create the entries for - * the device depending on the class of the I2O device. - */ -static void i2o_proc_device_add(struct proc_dir_entry *dir, - struct i2o_device *dev) -{ - char buff[10]; - struct proc_dir_entry *devdir; - i2o_proc_entry *i2o_pe = NULL; - - sprintf(buff, "%03x", dev->lct_data.tid); - - osm_debug("adding device /proc/i2o/%s/%s\n", dev->iop->name, buff); - - devdir = proc_mkdir_data(buff, 0, dir, dev); - if (!devdir) { - osm_warn("Could not allocate procdir!\n"); - return; - } - - i2o_proc_create_entries(devdir, generic_dev_entries, dev); - - /* Inform core that we want updates about this device's status */ - switch (dev->lct_data.class_id) { - case I2O_CLASS_SCSI_PERIPHERAL: - case I2O_CLASS_RANDOM_BLOCK_STORAGE: - i2o_pe = rbs_dev_entries; - break; - default: - break; - } - if (i2o_pe) - i2o_proc_create_entries(devdir, i2o_pe, dev); -} - -/** - * i2o_proc_iop_add - Add an I2O controller to the i2o proc tree - * @dir: parent proc dir entry - * @c: I2O controller which should be added - * - * Add the entries to the parent proc dir entry. Also each device is added - * to the controllers proc dir entry. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_proc_iop_add(struct proc_dir_entry *dir, - struct i2o_controller *c) -{ - struct proc_dir_entry *iopdir; - struct i2o_device *dev; - - osm_debug("adding IOP /proc/i2o/%s\n", c->name); - - iopdir = proc_mkdir_data(c->name, 0, dir, c); - if (!iopdir) - return -1; - - i2o_proc_create_entries(iopdir, i2o_proc_generic_iop_entries, c); - - list_for_each_entry(dev, &c->devices, list) - i2o_proc_device_add(iopdir, dev); - - return 0; -} - -/** - * i2o_proc_fs_create - Create the i2o proc fs. - * - * Iterate over each I2O controller and create the entries for it. - * - * Returns 0 on success or negative error code on failure. - */ -static int __init i2o_proc_fs_create(void) -{ - struct i2o_controller *c; - - i2o_proc_dir_root = proc_mkdir("i2o", NULL); - if (!i2o_proc_dir_root) - return -1; - - list_for_each_entry(c, &i2o_controllers, list) - i2o_proc_iop_add(i2o_proc_dir_root, c); - - return 0; -}; - -/** - * i2o_proc_fs_destroy - Cleanup the all i2o proc entries - * - * Iterate over each I2O controller and remove the entries for it. - * - * Returns 0 on success or negative error code on failure. - */ -static int __exit i2o_proc_fs_destroy(void) -{ - remove_proc_subtree("i2o", NULL); - - return 0; -}; - -/** - * i2o_proc_init - Init function for procfs - * - * Registers Proc OSM and creates procfs entries. - * - * Returns 0 on success or negative error code on failure. - */ -static int __init i2o_proc_init(void) -{ - int rc; - - printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - - rc = i2o_driver_register(&i2o_proc_driver); - if (rc) - return rc; - - rc = i2o_proc_fs_create(); - if (rc) { - i2o_driver_unregister(&i2o_proc_driver); - return rc; - } - - return 0; -}; - -/** - * i2o_proc_exit - Exit function for procfs - * - * Unregisters Proc OSM and removes procfs entries. - */ -static void __exit i2o_proc_exit(void) -{ - i2o_driver_unregister(&i2o_proc_driver); - i2o_proc_fs_destroy(); -}; - -MODULE_AUTHOR("Deepak Saxena"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION(OSM_DESCRIPTION); -MODULE_VERSION(OSM_VERSION); - -module_init(i2o_proc_init); -module_exit(i2o_proc_exit); diff --git a/drivers/staging/i2o/i2o_scsi.c b/drivers/staging/i2o/i2o_scsi.c deleted file mode 100644 index 1b11dcb3faea..000000000000 --- a/drivers/staging/i2o/i2o_scsi.c +++ /dev/null @@ -1,814 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * For the avoidance of doubt the "preferred form" of this code is one which - * is in an open non patent encumbered format. Where cryptographic key signing - * forms part of the process of creating an executable the information - * including keys needed to generate an equivalently functional executable - * are deemed to be part of the source code. - * - * Complications for I2O scsi - * - * o Each (bus,lun) is a logical device in I2O. We keep a map - * table. We spoof failed selection for unmapped units - * o Request sense buffers can come back for free. - * o Scatter gather is a bit dynamic. We have to investigate at - * setup time. - * o Some of our resources are dynamically shared. The i2o core - * needs a message reservation protocol to avoid swap v net - * deadlocking. We need to back off queue requests. - * - * In general the firmware wants to help. Where its help isn't performance - * useful we just ignore the aid. Its not worth the code in truth. - * - * Fixes/additions: - * Steve Ralston: - * Scatter gather now works - * Markus Lidel : - * Minor fixes for 2.6. - * - * To Do: - * 64bit cleanups - * Fix the resource management problems. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "i2o.h" -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#define OSM_NAME "scsi-osm" -#define OSM_VERSION "1.316" -#define OSM_DESCRIPTION "I2O SCSI Peripheral OSM" - -static struct i2o_driver i2o_scsi_driver; - -static unsigned int i2o_scsi_max_id = 16; -static unsigned int i2o_scsi_max_lun = 255; - -struct i2o_scsi_host { - struct Scsi_Host *scsi_host; /* pointer to the SCSI host */ - struct i2o_controller *iop; /* pointer to the I2O controller */ - u64 lun; /* lun's used for block devices */ - struct i2o_device *channel[0]; /* channel->i2o_dev mapping table */ -}; - -static struct scsi_host_template i2o_scsi_host_template; - -#define I2O_SCSI_CAN_QUEUE 4 - -/* SCSI OSM class handling definition */ -static struct i2o_class_id i2o_scsi_class_id[] = { - {I2O_CLASS_SCSI_PERIPHERAL}, - {I2O_CLASS_END} -}; - -static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) -{ - struct i2o_scsi_host *i2o_shost; - struct i2o_device *i2o_dev; - struct Scsi_Host *scsi_host; - int max_channel = 0; - u8 type; - int i; - size_t size; - u16 body_size = 6; - -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) - body_size = 8; -#endif - - list_for_each_entry(i2o_dev, &c->devices, list) - if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { - if (!i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) - && (type == 0x01)) /* SCSI bus */ - max_channel++; - } - - if (!max_channel) { - osm_warn("no channels found on %s\n", c->name); - return ERR_PTR(-EFAULT); - } - - size = max_channel * sizeof(struct i2o_device *) - + sizeof(struct i2o_scsi_host); - - scsi_host = scsi_host_alloc(&i2o_scsi_host_template, size); - if (!scsi_host) { - osm_warn("Could not allocate SCSI host\n"); - return ERR_PTR(-ENOMEM); - } - - scsi_host->max_channel = max_channel - 1; - scsi_host->max_id = i2o_scsi_max_id; - scsi_host->max_lun = i2o_scsi_max_lun; - scsi_host->this_id = c->unit; - scsi_host->sg_tablesize = i2o_sg_tablesize(c, body_size); - - i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata; - i2o_shost->scsi_host = scsi_host; - i2o_shost->iop = c; - i2o_shost->lun = 1; - - i = 0; - list_for_each_entry(i2o_dev, &c->devices, list) - if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { - if (!i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) - && (type == 0x01)) /* only SCSI bus */ - i2o_shost->channel[i++] = i2o_dev; - - if (i >= max_channel) - break; - } - - return i2o_shost; -}; - -/** - * i2o_scsi_get_host - Get an I2O SCSI host - * @c: I2O controller to for which to get the SCSI host - * - * If the I2O controller already exists as SCSI host, the SCSI host - * is returned, otherwise the I2O controller is added to the SCSI - * core. - * - * Returns pointer to the I2O SCSI host on success or NULL on failure. - */ -static struct i2o_scsi_host *i2o_scsi_get_host(struct i2o_controller *c) -{ - return c->driver_data[i2o_scsi_driver.context]; -}; - -/** - * i2o_scsi_remove - Remove I2O device from SCSI core - * @dev: device which should be removed - * - * Removes the I2O device from the SCSI core again. - * - * Returns 0 on success. - */ -static int i2o_scsi_remove(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - struct i2o_controller *c = i2o_dev->iop; - struct i2o_scsi_host *i2o_shost; - struct scsi_device *scsi_dev; - - osm_info("device removed (TID: %03x)\n", i2o_dev->lct_data.tid); - - i2o_shost = i2o_scsi_get_host(c); - - shost_for_each_device(scsi_dev, i2o_shost->scsi_host) - if (scsi_dev->hostdata == i2o_dev) { - sysfs_remove_link(&i2o_dev->device.kobj, "scsi"); - scsi_remove_device(scsi_dev); - scsi_device_put(scsi_dev); - break; - } - - return 0; -}; - -/** - * i2o_scsi_probe - verify if dev is a I2O SCSI device and install it - * @dev: device to verify if it is a I2O SCSI device - * - * Retrieve channel, id and lun for I2O device. If everything goes well - * register the I2O device as SCSI device on the I2O SCSI controller. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_scsi_probe(struct device *dev) -{ - struct i2o_device *i2o_dev = to_i2o_device(dev); - struct i2o_controller *c = i2o_dev->iop; - struct i2o_scsi_host *i2o_shost; - struct Scsi_Host *scsi_host; - struct i2o_device *parent; - struct scsi_device *scsi_dev; - u32 id = -1; - u64 lun = -1; - int channel = -1; - int i, rc; - - i2o_shost = i2o_scsi_get_host(c); - if (!i2o_shost) - return -EFAULT; - - scsi_host = i2o_shost->scsi_host; - - switch (i2o_dev->lct_data.class_id) { - case I2O_CLASS_RANDOM_BLOCK_STORAGE: - case I2O_CLASS_EXECUTIVE: -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - u8 type; - struct i2o_device *d = i2o_shost->channel[0]; - - if (!i2o_parm_field_get(d, 0x0000, 0, &type, 1) - && (type == 0x01)) /* SCSI bus */ - if (!i2o_parm_field_get(d, 0x0200, 4, &id, 4)) { - channel = 0; - if (i2o_dev->lct_data.class_id == - I2O_CLASS_RANDOM_BLOCK_STORAGE) - lun = - cpu_to_le64(i2o_shost-> - lun++); - else - lun = 0; - } - } -#endif - break; - - case I2O_CLASS_SCSI_PERIPHERAL: - if (i2o_parm_field_get(i2o_dev, 0x0000, 3, &id, 4)) - return -EFAULT; - - if (i2o_parm_field_get(i2o_dev, 0x0000, 4, &lun, 8)) - return -EFAULT; - - parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid); - if (!parent) { - osm_warn("can not find parent of device %03x\n", - i2o_dev->lct_data.tid); - return -EFAULT; - } - - for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++) - if (i2o_shost->channel[i] == parent) - channel = i; - break; - - default: - return -EFAULT; - } - - if (channel == -1) { - osm_warn("can not find channel of device %03x\n", - i2o_dev->lct_data.tid); - return -EFAULT; - } - - if (le32_to_cpu(id) >= scsi_host->max_id) { - osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", - le32_to_cpu(id), scsi_host->max_id); - return -EFAULT; - } - - if (le64_to_cpu(lun) >= scsi_host->max_lun) { - osm_warn("SCSI device lun (%llu) >= max_lun of I2O host (%llu)", - le64_to_cpu(lun), scsi_host->max_lun); - return -EFAULT; - } - - scsi_dev = - __scsi_add_device(i2o_shost->scsi_host, channel, le32_to_cpu(id), - le64_to_cpu(lun), i2o_dev); - - if (IS_ERR(scsi_dev)) { - osm_warn("can not add SCSI device %03x\n", - i2o_dev->lct_data.tid); - return PTR_ERR(scsi_dev); - } - - rc = sysfs_create_link(&i2o_dev->device.kobj, - &scsi_dev->sdev_gendev.kobj, "scsi"); - if (rc) - goto err; - - osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %llu\n", - i2o_dev->lct_data.tid, channel, le32_to_cpu(id), - le64_to_cpu(lun)); - - return 0; - -err: - scsi_remove_device(scsi_dev); - return rc; -}; - -static const char *i2o_scsi_info(struct Scsi_Host *SChost) -{ - struct i2o_scsi_host *hostdata; - hostdata = (struct i2o_scsi_host *)SChost->hostdata; - return hostdata->iop->name; -} - -/** - * i2o_scsi_reply - SCSI OSM message reply handler - * @c: controller issuing the reply - * @m: message id for flushing - * @msg: the message from the controller - * - * Process reply messages (interrupts in normal scsi controller think). - * We can get a variety of messages to process. The normal path is - * scsi command completions. We must also deal with IOP failures, - * the reply to a bus reset and the reply to a LUN query. - * - * Returns 0 on success and if the reply should not be flushed or > 0 - * on success and if the reply should be flushed. Returns negative error - * code on failure and if the reply should be flushed. - */ -static int i2o_scsi_reply(struct i2o_controller *c, u32 m, - struct i2o_message *msg) -{ - struct scsi_cmnd *cmd; - u32 error; - struct device *dev; - - cmd = i2o_cntxt_list_get(c, le32_to_cpu(msg->u.s.tcntxt)); - if (unlikely(!cmd)) { - osm_err("NULL reply received!\n"); - return -1; - } - - /* - * Low byte is device status, next is adapter status, - * (then one byte reserved), then request status. - */ - error = le32_to_cpu(msg->body[0]); - - osm_debug("Completed %0x%p\n", cmd); - - cmd->result = error & 0xff; - /* - * if DeviceStatus is not SCSI_SUCCESS copy over the sense data and let - * the SCSI layer handle the error - */ - if (cmd->result) - memcpy(cmd->sense_buffer, &msg->body[3], - min(SCSI_SENSE_BUFFERSIZE, 40)); - - /* only output error code if AdapterStatus is not HBA_SUCCESS */ - if ((error >> 8) & 0xff) - osm_err("SCSI error %08x\n", error); - - dev = &c->pdev->dev; - - scsi_dma_unmap(cmd); - - cmd->scsi_done(cmd); - - return 1; -}; - -/** - * i2o_scsi_notify_device_add - Retrieve notifications of added devices - * @i2o_dev: the I2O device which was added - * - * If a I2O device is added we catch the notification, because I2O classes - * other than SCSI peripheral will not be received through - * i2o_scsi_probe(). - */ -static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev) -{ - switch (i2o_dev->lct_data.class_id) { - case I2O_CLASS_EXECUTIVE: - case I2O_CLASS_RANDOM_BLOCK_STORAGE: - i2o_scsi_probe(&i2o_dev->device); - break; - - default: - break; - } -}; - -/** - * i2o_scsi_notify_device_remove - Retrieve notifications of removed devices - * @i2o_dev: the I2O device which was removed - * - * If a I2O device is removed, we catch the notification to remove the - * corresponding SCSI device. - */ -static void i2o_scsi_notify_device_remove(struct i2o_device *i2o_dev) -{ - switch (i2o_dev->lct_data.class_id) { - case I2O_CLASS_EXECUTIVE: - case I2O_CLASS_RANDOM_BLOCK_STORAGE: - i2o_scsi_remove(&i2o_dev->device); - break; - - default: - break; - } -}; - -/** - * i2o_scsi_notify_controller_add - Retrieve notifications of added controllers - * @c: the controller which was added - * - * If a I2O controller is added, we catch the notification to add a - * corresponding Scsi_Host. - */ -static void i2o_scsi_notify_controller_add(struct i2o_controller *c) -{ - struct i2o_scsi_host *i2o_shost; - int rc; - - i2o_shost = i2o_scsi_host_alloc(c); - if (IS_ERR(i2o_shost)) { - osm_err("Could not initialize SCSI host\n"); - return; - } - - rc = scsi_add_host(i2o_shost->scsi_host, &c->device); - if (rc) { - osm_err("Could not add SCSI host\n"); - scsi_host_put(i2o_shost->scsi_host); - return; - } - - c->driver_data[i2o_scsi_driver.context] = i2o_shost; - - osm_debug("new I2O SCSI host added\n"); -}; - -/** - * i2o_scsi_notify_controller_remove - Retrieve notifications of removed controllers - * @c: the controller which was removed - * - * If a I2O controller is removed, we catch the notification to remove the - * corresponding Scsi_Host. - */ -static void i2o_scsi_notify_controller_remove(struct i2o_controller *c) -{ - struct i2o_scsi_host *i2o_shost; - i2o_shost = i2o_scsi_get_host(c); - if (!i2o_shost) - return; - - c->driver_data[i2o_scsi_driver.context] = NULL; - - scsi_remove_host(i2o_shost->scsi_host); - scsi_host_put(i2o_shost->scsi_host); - osm_debug("I2O SCSI host removed\n"); -}; - -/* SCSI OSM driver struct */ -static struct i2o_driver i2o_scsi_driver = { - .name = OSM_NAME, - .reply = i2o_scsi_reply, - .classes = i2o_scsi_class_id, - .notify_device_add = i2o_scsi_notify_device_add, - .notify_device_remove = i2o_scsi_notify_device_remove, - .notify_controller_add = i2o_scsi_notify_controller_add, - .notify_controller_remove = i2o_scsi_notify_controller_remove, - .driver = { - .probe = i2o_scsi_probe, - .remove = i2o_scsi_remove, - }, -}; - -/** - * i2o_scsi_queuecommand - queue a SCSI command - * @SCpnt: scsi command pointer - * @done: callback for completion - * - * Issue a scsi command asynchronously. Return 0 on success or 1 if - * we hit an error (normally message queue congestion). The only - * minor complication here is that I2O deals with the device addressing - * so we have to map the bus/dev/lun back to an I2O handle as well - * as faking absent devices ourself. - * - * Locks: takes the controller lock on error path only - */ - -static int i2o_scsi_queuecommand_lck(struct scsi_cmnd *SCpnt, - void (*done) (struct scsi_cmnd *)) -{ - struct i2o_controller *c; - struct i2o_device *i2o_dev; - int tid; - struct i2o_message *msg; - /* - * ENABLE_DISCONNECT - * SIMPLE_TAG - * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME - */ - u32 scsi_flags = 0x20a00000; - u32 sgl_offset; - u32 *mptr; - u32 cmd = I2O_CMD_SCSI_EXEC << 24; - int rc = 0; - - /* - * Do the incoming paperwork - */ - i2o_dev = SCpnt->device->hostdata; - - SCpnt->scsi_done = done; - - if (unlikely(!i2o_dev)) { - osm_warn("no I2O device in request\n"); - SCpnt->result = DID_NO_CONNECT << 16; - done(SCpnt); - goto exit; - } - c = i2o_dev->iop; - tid = i2o_dev->lct_data.tid; - - osm_debug("qcmd: Tid = %03x\n", tid); - osm_debug("Real scsi messages.\n"); - - /* - * Put together a scsi execscb message - */ - switch (SCpnt->sc_data_direction) { - case PCI_DMA_NONE: - /* DATA NO XFER */ - sgl_offset = SGL_OFFSET_0; - break; - - case PCI_DMA_TODEVICE: - /* DATA OUT (iop-->dev) */ - scsi_flags |= 0x80000000; - sgl_offset = SGL_OFFSET_10; - break; - - case PCI_DMA_FROMDEVICE: - /* DATA IN (iop<--dev) */ - scsi_flags |= 0x40000000; - sgl_offset = SGL_OFFSET_10; - break; - - default: - /* Unknown - kill the command */ - SCpnt->result = DID_NO_CONNECT << 16; - done(SCpnt); - goto exit; - } - - /* - * Obtain an I2O message. If there are none free then - * throw it back to the scsi layer - */ - - msg = i2o_msg_get(c); - if (IS_ERR(msg)) { - rc = SCSI_MLQUEUE_HOST_BUSY; - goto exit; - } - - mptr = &msg->body[0]; - -#if 0 /* this code can't work */ -#ifdef CONFIG_I2O_EXT_ADAPTEC - if (c->adaptec) { - u32 adpt_flags = 0; - - if (SCpnt->sc_request && SCpnt->sc_request->upper_private_data) { - i2o_sg_io_hdr_t __user *usr_ptr = - ((Sg_request *) (SCpnt->sc_request-> - upper_private_data))->header. - usr_ptr; - - if (usr_ptr) - get_user(adpt_flags, &usr_ptr->flags); - } - - switch (i2o_dev->lct_data.class_id) { - case I2O_CLASS_EXECUTIVE: - case I2O_CLASS_RANDOM_BLOCK_STORAGE: - /* interpret flag has to be set for executive */ - adpt_flags ^= I2O_DPT_SG_FLAG_INTERPRET; - break; - - default: - break; - } - - /* - * for Adaptec controllers we use the PRIVATE command, because - * the normal SCSI EXEC doesn't support all SCSI commands on - * all controllers (for example READ CAPACITY). - */ - if (sgl_offset == SGL_OFFSET_10) - sgl_offset = SGL_OFFSET_12; - cmd = I2O_CMD_PRIVATE << 24; - *mptr++ = cpu_to_le32(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC); - *mptr++ = cpu_to_le32(adpt_flags | tid); - } -#endif -#endif - - msg->u.head[1] = cpu_to_le32(cmd | HOST_TID << 12 | tid); - msg->u.s.icntxt = cpu_to_le32(i2o_scsi_driver.context); - - /* We want the SCSI control block back */ - msg->u.s.tcntxt = cpu_to_le32(i2o_cntxt_list_add(c, SCpnt)); - - /* LSI_920_PCI_QUIRK - * - * Intermittant observations of msg frame word data corruption - * observed on msg[4] after: - * WRITE, READ-MODIFY-WRITE - * operations. 19990606 -sralston - * - * (Hence we build this word via tag. Its good practice anyway - * we don't want fetches over PCI needlessly) - */ - - /* Attach tags to the devices */ - /* FIXME: implement - if(SCpnt->device->tagged_supported) { - if(SCpnt->tag == HEAD_OF_QUEUE_TAG) - scsi_flags |= 0x01000000; - else if(SCpnt->tag == ORDERED_QUEUE_TAG) - scsi_flags |= 0x01800000; - } - */ - - *mptr++ = cpu_to_le32(scsi_flags | SCpnt->cmd_len); - - /* Write SCSI command into the message - always 16 byte block */ - memcpy(mptr, SCpnt->cmnd, 16); - mptr += 4; - - if (sgl_offset != SGL_OFFSET_0) { - /* write size of data addressed by SGL */ - *mptr++ = cpu_to_le32(scsi_bufflen(SCpnt)); - - /* Now fill in the SGList and command */ - - if (scsi_sg_count(SCpnt)) { - if (!i2o_dma_map_sg(c, scsi_sglist(SCpnt), - scsi_sg_count(SCpnt), - SCpnt->sc_data_direction, &mptr)) - goto nomem; - } - } - - /* Stick the headers on */ - msg->u.head[0] = - cpu_to_le32(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset); - - /* Queue the message */ - i2o_msg_post(c, msg); - - osm_debug("Issued %0x%p\n", SCpnt); - - return 0; - - nomem: - rc = -ENOMEM; - i2o_msg_nop(c, msg); - - exit: - return rc; -} - -static DEF_SCSI_QCMD(i2o_scsi_queuecommand) - -/** - * i2o_scsi_abort - abort a running command - * @SCpnt: command to abort - * - * Ask the I2O controller to abort a command. This is an asynchrnous - * process and our callback handler will see the command complete with an - * aborted message if it succeeds. - * - * Returns 0 if the command is successfully aborted or negative error code - * on failure. - */ -static int i2o_scsi_abort(struct scsi_cmnd *SCpnt) -{ - struct i2o_device *i2o_dev; - struct i2o_controller *c; - struct i2o_message *msg; - int tid; - int status = FAILED; - - osm_warn("Aborting command block.\n"); - - i2o_dev = SCpnt->device->hostdata; - c = i2o_dev->iop; - tid = i2o_dev->lct_data.tid; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return SCSI_MLQUEUE_HOST_BUSY; - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_SCSI_ABORT << 24 | HOST_TID << 12 | tid); - msg->body[0] = cpu_to_le32(i2o_cntxt_list_get_ptr(c, SCpnt)); - - if (!i2o_msg_post_wait(c, msg, I2O_TIMEOUT_SCSI_SCB_ABORT)) - status = SUCCESS; - - return status; -} - -/** - * i2o_scsi_bios_param - Invent disk geometry - * @sdev: scsi device - * @dev: block layer device - * @capacity: size in sectors - * @ip: geometry array - * - * This is anyone's guess quite frankly. We use the same rules everyone - * else appears to and hope. It seems to work. - */ - -static int i2o_scsi_bios_param(struct scsi_device *sdev, - struct block_device *dev, sector_t capacity, - int *ip) -{ - int size; - - size = capacity; - ip[0] = 64; /* heads */ - ip[1] = 32; /* sectors */ - if ((ip[2] = size >> 11) > 1024) { /* cylinders, test for big disk */ - ip[0] = 255; /* heads */ - ip[1] = 63; /* sectors */ - ip[2] = size / (255 * 63); /* cylinders */ - } - return 0; -} - -static struct scsi_host_template i2o_scsi_host_template = { - .proc_name = OSM_NAME, - .name = OSM_DESCRIPTION, - .info = i2o_scsi_info, - .queuecommand = i2o_scsi_queuecommand, - .eh_abort_handler = i2o_scsi_abort, - .bios_param = i2o_scsi_bios_param, - .can_queue = I2O_SCSI_CAN_QUEUE, - .sg_tablesize = 8, - .cmd_per_lun = 6, - .use_clustering = ENABLE_CLUSTERING, -}; - -/** - * i2o_scsi_init - SCSI OSM initialization function - * - * Register SCSI OSM into I2O core. - * - * Returns 0 on success or negative error code on failure. - */ -static int __init i2o_scsi_init(void) -{ - int rc; - - printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - - /* Register SCSI OSM into I2O core */ - rc = i2o_driver_register(&i2o_scsi_driver); - if (rc) { - osm_err("Could not register SCSI driver\n"); - return rc; - } - - return 0; -}; - -/** - * i2o_scsi_exit - SCSI OSM exit function - * - * Unregisters SCSI OSM from I2O core. - */ -static void __exit i2o_scsi_exit(void) -{ - /* Unregister I2O SCSI OSM from I2O core */ - i2o_driver_unregister(&i2o_scsi_driver); -}; - -MODULE_AUTHOR("Red Hat Software"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION(OSM_DESCRIPTION); -MODULE_VERSION(OSM_VERSION); - -module_init(i2o_scsi_init); -module_exit(i2o_scsi_exit); diff --git a/drivers/staging/i2o/iop.c b/drivers/staging/i2o/iop.c deleted file mode 100644 index 3c2379097586..000000000000 --- a/drivers/staging/i2o/iop.c +++ /dev/null @@ -1,1254 +0,0 @@ -/* - * Functions to handle I2O controllers and I2O message handling - * - * Copyright (C) 1999-2002 Red Hat Software - * - * Written by Alan Cox, Building Number Three Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * A lot of the I2O message side code from this is taken from the - * Red Creek RCPCI45 adapter driver by Red Creek Communications - * - * Fixes/additions: - * Philipp Rumpf - * Juha Sievänen - * Auvo Häkkinen - * Deepak Saxena - * Boji T Kannanthanam - * Alan Cox : - * Ported to Linux 2.5. - * Markus Lidel : - * Minor fixes for 2.6. - */ - -#include -#include "i2o.h" -#include -#include -#include -#include "core.h" - -#define OSM_NAME "i2o" -#define OSM_VERSION "1.325" -#define OSM_DESCRIPTION "I2O subsystem" - -/* global I2O controller list */ -LIST_HEAD(i2o_controllers); - -/* - * global I2O System Table. Contains information about all the IOPs in the - * system. Used to inform IOPs about each others existence. - */ -static struct i2o_dma i2o_systab; - -static int i2o_hrt_get(struct i2o_controller *c); - -/** - * i2o_msg_get_wait - obtain an I2O message from the IOP - * @c: I2O controller - * @wait: how long to wait until timeout - * - * This function waits up to wait seconds for a message slot to be - * available. - * - * On a success the message is returned and the pointer to the message is - * set in msg. The returned message is the physical page frame offset - * address from the read port (see the i2o spec). If no message is - * available returns I2O_QUEUE_EMPTY and msg is leaved untouched. - */ -struct i2o_message *i2o_msg_get_wait(struct i2o_controller *c, int wait) -{ - unsigned long timeout = jiffies + wait * HZ; - struct i2o_message *msg; - - while (IS_ERR(msg = i2o_msg_get(c))) { - if (time_after(jiffies, timeout)) { - osm_debug("%s: Timeout waiting for message frame.\n", - c->name); - return ERR_PTR(-ETIMEDOUT); - } - schedule_timeout_uninterruptible(1); - } - - return msg; -} - -#if BITS_PER_LONG == 64 -/** - * i2o_cntxt_list_add - Append a pointer to context list and return a id - * @c: controller to which the context list belong - * @ptr: pointer to add to the context list - * - * Because the context field in I2O is only 32-bit large, on 64-bit the - * pointer is to large to fit in the context field. The i2o_cntxt_list - * functions therefore map pointers to context fields. - * - * Returns context id > 0 on success or 0 on failure. - */ -u32 i2o_cntxt_list_add(struct i2o_controller * c, void *ptr) -{ - struct i2o_context_list_element *entry; - unsigned long flags; - - if (!ptr) - osm_err("%s: couldn't add NULL pointer to context list!\n", - c->name); - - entry = kmalloc(sizeof(*entry), GFP_ATOMIC); - if (!entry) { - osm_err("%s: Could not allocate memory for context list element" - "\n", c->name); - return 0; - } - - entry->ptr = ptr; - entry->timestamp = jiffies; - INIT_LIST_HEAD(&entry->list); - - spin_lock_irqsave(&c->context_list_lock, flags); - - if (unlikely(atomic_inc_and_test(&c->context_list_counter))) - atomic_inc(&c->context_list_counter); - - entry->context = atomic_read(&c->context_list_counter); - - list_add(&entry->list, &c->context_list); - - spin_unlock_irqrestore(&c->context_list_lock, flags); - - osm_debug("%s: Add context to list %p -> %d\n", c->name, ptr, context); - - return entry->context; -} - -/** - * i2o_cntxt_list_remove - Remove a pointer from the context list - * @c: controller to which the context list belong - * @ptr: pointer which should be removed from the context list - * - * Removes a previously added pointer from the context list and returns - * the matching context id. - * - * Returns context id on success or 0 on failure. - */ -u32 i2o_cntxt_list_remove(struct i2o_controller * c, void *ptr) -{ - struct i2o_context_list_element *entry; - u32 context = 0; - unsigned long flags; - - spin_lock_irqsave(&c->context_list_lock, flags); - list_for_each_entry(entry, &c->context_list, list) - if (entry->ptr == ptr) { - list_del(&entry->list); - context = entry->context; - kfree(entry); - break; - } - spin_unlock_irqrestore(&c->context_list_lock, flags); - - if (!context) - osm_warn("%s: Could not remove nonexistent ptr %p\n", c->name, - ptr); - - osm_debug("%s: remove ptr from context list %d -> %p\n", c->name, - context, ptr); - - return context; -} - -/** - * i2o_cntxt_list_get - Get a pointer from the context list and remove it - * @c: controller to which the context list belong - * @context: context id to which the pointer belong - * - * Returns pointer to the matching context id on success or NULL on - * failure. - */ -void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context) -{ - struct i2o_context_list_element *entry; - unsigned long flags; - void *ptr = NULL; - - spin_lock_irqsave(&c->context_list_lock, flags); - list_for_each_entry(entry, &c->context_list, list) - if (entry->context == context) { - list_del(&entry->list); - ptr = entry->ptr; - kfree(entry); - break; - } - spin_unlock_irqrestore(&c->context_list_lock, flags); - - if (!ptr) - osm_warn("%s: context id %d not found\n", c->name, context); - - osm_debug("%s: get ptr from context list %d -> %p\n", c->name, context, - ptr); - - return ptr; -} - -/** - * i2o_cntxt_list_get_ptr - Get a context id from the context list - * @c: controller to which the context list belong - * @ptr: pointer to which the context id should be fetched - * - * Returns context id which matches to the pointer on success or 0 on - * failure. - */ -u32 i2o_cntxt_list_get_ptr(struct i2o_controller * c, void *ptr) -{ - struct i2o_context_list_element *entry; - u32 context = 0; - unsigned long flags; - - spin_lock_irqsave(&c->context_list_lock, flags); - list_for_each_entry(entry, &c->context_list, list) - if (entry->ptr == ptr) { - context = entry->context; - break; - } - spin_unlock_irqrestore(&c->context_list_lock, flags); - - if (!context) - osm_warn("%s: Could not find nonexistent ptr %p\n", c->name, - ptr); - - osm_debug("%s: get context id from context list %p -> %d\n", c->name, - ptr, context); - - return context; -} -#endif - -/** - * i2o_iop_find - Find an I2O controller by id - * @unit: unit number of the I2O controller to search for - * - * Lookup the I2O controller on the controller list. - * - * Returns pointer to the I2O controller on success or NULL if not found. - */ -struct i2o_controller *i2o_find_iop(int unit) -{ - struct i2o_controller *c; - - list_for_each_entry(c, &i2o_controllers, list) { - if (c->unit == unit) - return c; - } - - return NULL; -} - -/** - * i2o_iop_find_device - Find a I2O device on an I2O controller - * @c: I2O controller where the I2O device hangs on - * @tid: TID of the I2O device to search for - * - * Searches the devices of the I2O controller for a device with TID tid and - * returns it. - * - * Returns a pointer to the I2O device if found, otherwise NULL. - */ -struct i2o_device *i2o_iop_find_device(struct i2o_controller *c, u16 tid) -{ - struct i2o_device *dev; - - list_for_each_entry(dev, &c->devices, list) - if (dev->lct_data.tid == tid) - return dev; - - return NULL; -} - -/** - * i2o_quiesce_controller - quiesce controller - * @c: controller - * - * Quiesce an IOP. Causes IOP to make external operation quiescent - * (i2o 'READY' state). Internal operation of the IOP continues normally. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_iop_quiesce(struct i2o_controller *c) -{ - struct i2o_message *msg; - i2o_status_block *sb = c->status_block.virt; - int rc; - - i2o_status_get(c); - - /* SysQuiesce discarded if IOP not in READY or OPERATIONAL state */ - if ((sb->iop_state != ADAPTER_STATE_READY) && - (sb->iop_state != ADAPTER_STATE_OPERATIONAL)) - return 0; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_SYS_QUIESCE << 24 | HOST_TID << 12 | - ADAPTER_TID); - - /* Long timeout needed for quiesce if lots of devices */ - rc = i2o_msg_post_wait(c, msg, 240); - if (rc) - osm_info("%s: Unable to quiesce (status=%#x).\n", c->name, -rc); - else - osm_debug("%s: Quiesced.\n", c->name); - - i2o_status_get(c); // Entered READY state - - return rc; -} - -/** - * i2o_iop_enable - move controller from ready to OPERATIONAL - * @c: I2O controller - * - * Enable IOP. This allows the IOP to resume external operations and - * reverses the effect of a quiesce. Returns zero or an error code if - * an error occurs. - */ -static int i2o_iop_enable(struct i2o_controller *c) -{ - struct i2o_message *msg; - i2o_status_block *sb = c->status_block.virt; - int rc; - - i2o_status_get(c); - - /* Enable only allowed on READY state */ - if (sb->iop_state != ADAPTER_STATE_READY) - return -EINVAL; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_SYS_ENABLE << 24 | HOST_TID << 12 | - ADAPTER_TID); - - /* How long of a timeout do we need? */ - rc = i2o_msg_post_wait(c, msg, 240); - if (rc) - osm_err("%s: Could not enable (status=%#x).\n", c->name, -rc); - else - osm_debug("%s: Enabled.\n", c->name); - - i2o_status_get(c); // entered OPERATIONAL state - - return rc; -} - -/** - * i2o_iop_quiesce_all - Quiesce all I2O controllers on the system - * - * Quiesce all I2O controllers which are connected to the system. - */ -static inline void i2o_iop_quiesce_all(void) -{ - struct i2o_controller *c, *tmp; - - list_for_each_entry_safe(c, tmp, &i2o_controllers, list) { - if (!c->no_quiesce) - i2o_iop_quiesce(c); - } -} - -/** - * i2o_iop_enable_all - Enables all controllers on the system - * - * Enables all I2O controllers which are connected to the system. - */ -static inline void i2o_iop_enable_all(void) -{ - struct i2o_controller *c, *tmp; - - list_for_each_entry_safe(c, tmp, &i2o_controllers, list) - i2o_iop_enable(c); -} - -/** - * i2o_clear_controller - Bring I2O controller into HOLD state - * @c: controller - * - * Clear an IOP to HOLD state, ie. terminate external operations, clear all - * input queues and prepare for a system restart. IOP's internal operation - * continues normally and the outbound queue is alive. The IOP is not - * expected to rebuild its LCT. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_iop_clear(struct i2o_controller *c) -{ - struct i2o_message *msg; - int rc; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - /* Quiesce all IOPs first */ - i2o_iop_quiesce_all(); - - msg->u.head[0] = cpu_to_le32(FOUR_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_ADAPTER_CLEAR << 24 | HOST_TID << 12 | - ADAPTER_TID); - - rc = i2o_msg_post_wait(c, msg, 30); - if (rc) - osm_info("%s: Unable to clear (status=%#x).\n", c->name, -rc); - else - osm_debug("%s: Cleared.\n", c->name); - - /* Enable all IOPs */ - i2o_iop_enable_all(); - - return rc; -} - -/** - * i2o_iop_init_outbound_queue - setup the outbound message queue - * @c: I2O controller - * - * Clear and (re)initialize IOP's outbound queue and post the message - * frames to the IOP. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_iop_init_outbound_queue(struct i2o_controller *c) -{ - u32 m; - volatile u8 *status = c->status.virt; - struct i2o_message *msg; - ulong timeout; - int i; - - osm_debug("%s: Initializing Outbound Queue...\n", c->name); - - memset(c->status.virt, 0, 4); - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_6); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_OUTBOUND_INIT << 24 | HOST_TID << 12 | - ADAPTER_TID); - msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); - msg->u.s.tcntxt = cpu_to_le32(0x00000000); - msg->body[0] = cpu_to_le32(PAGE_SIZE); - /* Outbound msg frame size in words and Initcode */ - msg->body[1] = cpu_to_le32(I2O_OUTBOUND_MSG_FRAME_SIZE << 16 | 0x80); - msg->body[2] = cpu_to_le32(0xd0000004); - msg->body[3] = cpu_to_le32(i2o_dma_low(c->status.phys)); - msg->body[4] = cpu_to_le32(i2o_dma_high(c->status.phys)); - - i2o_msg_post(c, msg); - - timeout = jiffies + I2O_TIMEOUT_INIT_OUTBOUND_QUEUE * HZ; - while (*status <= I2O_CMD_IN_PROGRESS) { - if (time_after(jiffies, timeout)) { - osm_warn("%s: Timeout Initializing\n", c->name); - return -ETIMEDOUT; - } - schedule_timeout_uninterruptible(1); - } - - m = c->out_queue.phys; - - /* Post frames */ - for (i = 0; i < I2O_MAX_OUTBOUND_MSG_FRAMES; i++) { - i2o_flush_reply(c, m); - udelay(1); /* Promise */ - m += I2O_OUTBOUND_MSG_FRAME_SIZE * sizeof(u32); - } - - return 0; -} - -/** - * i2o_iop_reset - reset an I2O controller - * @c: controller to reset - * - * Reset the IOP into INIT state and wait until IOP gets into RESET state. - * Terminate all external operations, clear IOP's inbound and outbound - * queues, terminate all DDMs, and reload the IOP's operating environment - * and all local DDMs. The IOP rebuilds its LCT. - */ -static int i2o_iop_reset(struct i2o_controller *c) -{ - volatile u8 *status = c->status.virt; - struct i2o_message *msg; - unsigned long timeout; - i2o_status_block *sb = c->status_block.virt; - int rc = 0; - - osm_debug("%s: Resetting controller\n", c->name); - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - memset(c->status_block.virt, 0, 8); - - /* Quiesce all IOPs first */ - i2o_iop_quiesce_all(); - - msg->u.head[0] = cpu_to_le32(EIGHT_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_ADAPTER_RESET << 24 | HOST_TID << 12 | - ADAPTER_TID); - msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); - msg->u.s.tcntxt = cpu_to_le32(0x00000000); - msg->body[0] = cpu_to_le32(0x00000000); - msg->body[1] = cpu_to_le32(0x00000000); - msg->body[2] = cpu_to_le32(i2o_dma_low(c->status.phys)); - msg->body[3] = cpu_to_le32(i2o_dma_high(c->status.phys)); - - i2o_msg_post(c, msg); - - /* Wait for a reply */ - timeout = jiffies + I2O_TIMEOUT_RESET * HZ; - while (!*status) { - if (time_after(jiffies, timeout)) - break; - - schedule_timeout_uninterruptible(1); - } - - switch (*status) { - case I2O_CMD_REJECTED: - osm_warn("%s: IOP reset rejected\n", c->name); - rc = -EPERM; - break; - - case I2O_CMD_IN_PROGRESS: - /* - * Once the reset is sent, the IOP goes into the INIT state - * which is indeterminate. We need to wait until the IOP has - * rebooted before we can let the system talk to it. We read - * the inbound Free_List until a message is available. If we - * can't read one in the given amount of time, we assume the - * IOP could not reboot properly. - */ - osm_debug("%s: Reset in progress, waiting for reboot...\n", - c->name); - - while (IS_ERR(msg = i2o_msg_get_wait(c, I2O_TIMEOUT_RESET))) { - if (time_after(jiffies, timeout)) { - osm_err("%s: IOP reset timeout.\n", c->name); - rc = PTR_ERR(msg); - goto exit; - } - schedule_timeout_uninterruptible(1); - } - i2o_msg_nop(c, msg); - - /* from here all quiesce commands are safe */ - c->no_quiesce = 0; - - /* verify if controller is in state RESET */ - i2o_status_get(c); - - if (!c->promise && (sb->iop_state != ADAPTER_STATE_RESET)) - osm_warn("%s: reset completed, but adapter not in RESET" - " state.\n", c->name); - else - osm_debug("%s: reset completed.\n", c->name); - - break; - - default: - osm_err("%s: IOP reset timeout.\n", c->name); - rc = -ETIMEDOUT; - break; - } - - exit: - /* Enable all IOPs */ - i2o_iop_enable_all(); - - return rc; -} - -/** - * i2o_iop_activate - Bring controller up to HOLD - * @c: controller - * - * This function brings an I2O controller into HOLD state. The adapter - * is reset if necessary and then the queues and resource table are read. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_iop_activate(struct i2o_controller *c) -{ - i2o_status_block *sb = c->status_block.virt; - int rc; - int state; - - /* In INIT state, Wait Inbound Q to initialize (in i2o_status_get) */ - /* In READY state, Get status */ - - rc = i2o_status_get(c); - if (rc) { - osm_info("%s: Unable to obtain status, attempting a reset.\n", - c->name); - rc = i2o_iop_reset(c); - if (rc) - return rc; - } - - if (sb->i2o_version > I2OVER15) { - osm_err("%s: Not running version 1.5 of the I2O Specification." - "\n", c->name); - return -ENODEV; - } - - switch (sb->iop_state) { - case ADAPTER_STATE_FAULTED: - osm_err("%s: hardware fault\n", c->name); - return -EFAULT; - - case ADAPTER_STATE_READY: - case ADAPTER_STATE_OPERATIONAL: - case ADAPTER_STATE_HOLD: - case ADAPTER_STATE_FAILED: - osm_debug("%s: already running, trying to reset...\n", c->name); - rc = i2o_iop_reset(c); - if (rc) - return rc; - } - - /* preserve state */ - state = sb->iop_state; - - rc = i2o_iop_init_outbound_queue(c); - if (rc) - return rc; - - /* if adapter was not in RESET state clear now */ - if (state != ADAPTER_STATE_RESET) - i2o_iop_clear(c); - - i2o_status_get(c); - - if (sb->iop_state != ADAPTER_STATE_HOLD) { - osm_err("%s: failed to bring IOP into HOLD state\n", c->name); - return -EIO; - } - - return i2o_hrt_get(c); -} - -static void i2o_res_alloc(struct i2o_controller *c, unsigned long flags) -{ - i2o_status_block *sb = c->status_block.virt; - struct resource *res = &c->mem_resource; - resource_size_t size, align; - int err; - - res->name = c->pdev->bus->name; - res->flags = flags; - res->start = 0; - res->end = 0; - osm_info("%s: requires private memory resources.\n", c->name); - - if (flags & IORESOURCE_MEM) { - size = sb->desired_mem_size; - align = 1 << 20; /* unspecified, use 1Mb and play safe */ - } else { - size = sb->desired_io_size; - align = 1 << 12; /* unspecified, use 4Kb and play safe */ - } - - err = pci_bus_alloc_resource(c->pdev->bus, res, size, align, 0, 0, - NULL, NULL); - if (err < 0) - return; - - if (flags & IORESOURCE_MEM) { - c->mem_alloc = 1; - sb->current_mem_size = resource_size(res); - sb->current_mem_base = res->start; - } else if (flags & IORESOURCE_IO) { - c->io_alloc = 1; - sb->current_io_size = resource_size(res); - sb->current_io_base = res->start; - } - osm_info("%s: allocated PCI space %pR\n", c->name, res); -} - -/** - * i2o_iop_systab_set - Set the I2O System Table of the specified IOP - * @c: I2O controller to which the system table should be send - * - * Before the systab could be set i2o_systab_build() must be called. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_iop_systab_set(struct i2o_controller *c) -{ - struct i2o_message *msg; - i2o_status_block *sb = c->status_block.virt; - struct device *dev = &c->pdev->dev; - int rc; - - if (sb->current_mem_size < sb->desired_mem_size) - i2o_res_alloc(c, IORESOURCE_MEM); - - if (sb->current_io_size < sb->desired_io_size) - i2o_res_alloc(c, IORESOURCE_IO); - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - i2o_systab.phys = dma_map_single(dev, i2o_systab.virt, i2o_systab.len, - PCI_DMA_TODEVICE); - if (!i2o_systab.phys) { - i2o_msg_nop(c, msg); - return -ENOMEM; - } - - msg->u.head[0] = cpu_to_le32(I2O_MESSAGE_SIZE(12) | SGL_OFFSET_6); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_SYS_TAB_SET << 24 | HOST_TID << 12 | - ADAPTER_TID); - - /* - * Provide three SGL-elements: - * System table (SysTab), Private memory space declaration and - * Private i/o space declaration - */ - - msg->body[0] = cpu_to_le32(c->unit + 2); - msg->body[1] = cpu_to_le32(0x00000000); - msg->body[2] = cpu_to_le32(0x54000000 | i2o_systab.len); - msg->body[3] = cpu_to_le32(i2o_systab.phys); - msg->body[4] = cpu_to_le32(0x54000000 | sb->current_mem_size); - msg->body[5] = cpu_to_le32(sb->current_mem_base); - msg->body[6] = cpu_to_le32(0xd4000000 | sb->current_io_size); - msg->body[6] = cpu_to_le32(sb->current_io_base); - - rc = i2o_msg_post_wait(c, msg, 120); - - dma_unmap_single(dev, i2o_systab.phys, i2o_systab.len, - PCI_DMA_TODEVICE); - - if (rc < 0) - osm_err("%s: Unable to set SysTab (status=%#x).\n", c->name, - -rc); - else - osm_debug("%s: SysTab set.\n", c->name); - - return rc; -} - -/** - * i2o_iop_online - Bring a controller online into OPERATIONAL state. - * @c: I2O controller - * - * Send the system table and enable the I2O controller. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_iop_online(struct i2o_controller *c) -{ - int rc; - - rc = i2o_iop_systab_set(c); - if (rc) - return rc; - - /* In READY state */ - osm_debug("%s: Attempting to enable...\n", c->name); - return i2o_iop_enable(c); -} - -/** - * i2o_iop_remove - Remove the I2O controller from the I2O core - * @c: I2O controller - * - * Remove the I2O controller from the I2O core. If devices are attached to - * the controller remove these also and finally reset the controller. - */ -void i2o_iop_remove(struct i2o_controller *c) -{ - struct i2o_device *dev, *tmp; - - osm_debug("%s: deleting controller\n", c->name); - - i2o_driver_notify_controller_remove_all(c); - - list_del(&c->list); - - list_for_each_entry_safe(dev, tmp, &c->devices, list) - i2o_device_remove(dev); - - device_del(&c->device); - - /* Ask the IOP to switch to RESET state */ - i2o_iop_reset(c); -} - -/** - * i2o_systab_build - Build system table - * - * The system table contains information about all the IOPs in the system - * (duh) and is used by the Executives on the IOPs to establish peer2peer - * connections. We're not supporting peer2peer at the moment, but this - * will be needed down the road for things like lan2lan forwarding. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_systab_build(void) -{ - struct i2o_controller *c, *tmp; - int num_controllers = 0; - u32 change_ind = 0; - int count = 0; - struct i2o_sys_tbl *systab = i2o_systab.virt; - - list_for_each_entry_safe(c, tmp, &i2o_controllers, list) - num_controllers++; - - if (systab) { - change_ind = systab->change_ind; - kfree(i2o_systab.virt); - } - - /* Header + IOPs */ - i2o_systab.len = sizeof(struct i2o_sys_tbl) + num_controllers * - sizeof(struct i2o_sys_tbl_entry); - - systab = i2o_systab.virt = kzalloc(i2o_systab.len, GFP_KERNEL); - if (!systab) { - osm_err("unable to allocate memory for System Table\n"); - return -ENOMEM; - } - - systab->version = I2OVERSION; - systab->change_ind = change_ind + 1; - - list_for_each_entry_safe(c, tmp, &i2o_controllers, list) { - i2o_status_block *sb; - - if (count >= num_controllers) { - osm_err("controller added while building system table" - "\n"); - break; - } - - sb = c->status_block.virt; - - /* - * Get updated IOP state so we have the latest information - * - * We should delete the controller at this point if it - * doesn't respond since if it's not on the system table - * it is techninically not part of the I2O subsystem... - */ - if (unlikely(i2o_status_get(c))) { - osm_err("%s: Deleting b/c could not get status while " - "attempting to build system table\n", c->name); - i2o_iop_remove(c); - continue; // try the next one - } - - systab->iops[count].org_id = sb->org_id; - systab->iops[count].iop_id = c->unit + 2; - systab->iops[count].seg_num = 0; - systab->iops[count].i2o_version = sb->i2o_version; - systab->iops[count].iop_state = sb->iop_state; - systab->iops[count].msg_type = sb->msg_type; - systab->iops[count].frame_size = sb->inbound_frame_size; - systab->iops[count].last_changed = change_ind; - systab->iops[count].iop_capabilities = sb->iop_capabilities; - systab->iops[count].inbound_low = - i2o_dma_low(c->base.phys + I2O_IN_PORT); - systab->iops[count].inbound_high = - i2o_dma_high(c->base.phys + I2O_IN_PORT); - - count++; - } - - systab->num_entries = count; - - return 0; -} - -/** - * i2o_parse_hrt - Parse the hardware resource table. - * @c: I2O controller - * - * We don't do anything with it except dumping it (in debug mode). - * - * Returns 0. - */ -static int i2o_parse_hrt(struct i2o_controller *c) -{ - i2o_dump_hrt(c); - return 0; -} - -/** - * i2o_status_get - Get the status block from the I2O controller - * @c: I2O controller - * - * Issue a status query on the controller. This updates the attached - * status block. The status block could then be accessed through - * c->status_block. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_status_get(struct i2o_controller *c) -{ - struct i2o_message *msg; - volatile u8 *status_block; - unsigned long timeout; - - status_block = (u8 *) c->status_block.virt; - memset(c->status_block.virt, 0, sizeof(i2o_status_block)); - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(NINE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_STATUS_GET << 24 | HOST_TID << 12 | - ADAPTER_TID); - msg->u.s.icntxt = cpu_to_le32(i2o_exec_driver.context); - msg->u.s.tcntxt = cpu_to_le32(0x00000000); - msg->body[0] = cpu_to_le32(0x00000000); - msg->body[1] = cpu_to_le32(0x00000000); - msg->body[2] = cpu_to_le32(i2o_dma_low(c->status_block.phys)); - msg->body[3] = cpu_to_le32(i2o_dma_high(c->status_block.phys)); - msg->body[4] = cpu_to_le32(sizeof(i2o_status_block)); /* always 88 bytes */ - - i2o_msg_post(c, msg); - - /* Wait for a reply */ - timeout = jiffies + I2O_TIMEOUT_STATUS_GET * HZ; - while (status_block[87] != 0xFF) { - if (time_after(jiffies, timeout)) { - osm_err("%s: Get status timeout.\n", c->name); - return -ETIMEDOUT; - } - - schedule_timeout_uninterruptible(1); - } - -#ifdef DEBUG - i2o_debug_state(c); -#endif - - return 0; -} - -/* - * i2o_hrt_get - Get the Hardware Resource Table from the I2O controller - * @c: I2O controller from which the HRT should be fetched - * - * The HRT contains information about possible hidden devices but is - * mostly useless to us. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_hrt_get(struct i2o_controller *c) -{ - int rc; - int i; - i2o_hrt *hrt = c->hrt.virt; - u32 size = sizeof(i2o_hrt); - struct device *dev = &c->pdev->dev; - - for (i = 0; i < I2O_HRT_GET_TRIES; i++) { - struct i2o_message *msg; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(SIX_WORD_MSG_SIZE | SGL_OFFSET_4); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_HRT_GET << 24 | HOST_TID << 12 | - ADAPTER_TID); - msg->body[0] = cpu_to_le32(0xd0000000 | c->hrt.len); - msg->body[1] = cpu_to_le32(c->hrt.phys); - - rc = i2o_msg_post_wait_mem(c, msg, 20, &c->hrt); - - if (rc < 0) { - osm_err("%s: Unable to get HRT (status=%#x)\n", c->name, - -rc); - return rc; - } - - size = hrt->num_entries * hrt->entry_len << 2; - if (size > c->hrt.len) { - if (i2o_dma_realloc(dev, &c->hrt, size)) - return -ENOMEM; - else - hrt = c->hrt.virt; - } else - return i2o_parse_hrt(c); - } - - osm_err("%s: Unable to get HRT after %d tries, giving up\n", c->name, - I2O_HRT_GET_TRIES); - - return -EBUSY; -} - -/** - * i2o_iop_release - release the memory for a I2O controller - * @dev: I2O controller which should be released - * - * Release the allocated memory. This function is called if refcount of - * device reaches 0 automatically. - */ -static void i2o_iop_release(struct device *dev) -{ - struct i2o_controller *c = to_i2o_controller(dev); - - i2o_iop_free(c); -} - -/** - * i2o_iop_alloc - Allocate and initialize a i2o_controller struct - * - * Allocate the necessary memory for a i2o_controller struct and - * initialize the lists and message mempool. - * - * Returns a pointer to the I2O controller or a negative error code on - * failure. - */ -struct i2o_controller *i2o_iop_alloc(void) -{ - static int unit; /* 0 and 1 are NULL IOP and Local Host */ - struct i2o_controller *c; - char poolname[32]; - - c = kzalloc(sizeof(*c), GFP_KERNEL); - if (!c) { - osm_err("i2o: Insufficient memory to allocate a I2O controller." - "\n"); - return ERR_PTR(-ENOMEM); - } - - c->unit = unit++; - sprintf(c->name, "iop%d", c->unit); - - snprintf(poolname, sizeof(poolname), "i2o_%s_msg_inpool", c->name); - if (i2o_pool_alloc - (&c->in_msg, poolname, I2O_INBOUND_MSG_FRAME_SIZE * 4 + sizeof(u32), - I2O_MSG_INPOOL_MIN)) { - kfree(c); - return ERR_PTR(-ENOMEM); - } - - INIT_LIST_HEAD(&c->devices); - spin_lock_init(&c->lock); - mutex_init(&c->lct_lock); - - device_initialize(&c->device); - - c->device.release = &i2o_iop_release; - - dev_set_name(&c->device, "iop%d", c->unit); - -#if BITS_PER_LONG == 64 - spin_lock_init(&c->context_list_lock); - atomic_set(&c->context_list_counter, 0); - INIT_LIST_HEAD(&c->context_list); -#endif - - return c; -} - -/** - * i2o_iop_add - Initialize the I2O controller and add him to the I2O core - * @c: controller - * - * Initialize the I2O controller and if no error occurs add him to the I2O - * core. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_iop_add(struct i2o_controller *c) -{ - int rc; - - rc = device_add(&c->device); - if (rc) { - osm_err("%s: could not add controller\n", c->name); - goto iop_reset; - } - - osm_info("%s: Activating I2O controller...\n", c->name); - osm_info("%s: This may take a few minutes if there are many devices\n", - c->name); - - rc = i2o_iop_activate(c); - if (rc) { - osm_err("%s: could not activate controller\n", c->name); - goto device_del; - } - - osm_debug("%s: building sys table...\n", c->name); - - rc = i2o_systab_build(); - if (rc) - goto device_del; - - osm_debug("%s: online controller...\n", c->name); - - rc = i2o_iop_online(c); - if (rc) - goto device_del; - - osm_debug("%s: getting LCT...\n", c->name); - - rc = i2o_exec_lct_get(c); - if (rc) - goto device_del; - - list_add(&c->list, &i2o_controllers); - - i2o_driver_notify_controller_add_all(c); - - osm_info("%s: Controller added\n", c->name); - - return 0; - - device_del: - device_del(&c->device); - - iop_reset: - i2o_iop_reset(c); - - return rc; -} - -/** - * i2o_event_register - Turn on/off event notification for a I2O device - * @dev: I2O device which should receive the event registration request - * @drv: driver which want to get notified - * @tcntxt: transaction context to use with this notifier - * @evt_mask: mask of events - * - * Create and posts an event registration message to the task. No reply - * is waited for, or expected. If you do not want further notifications, - * call the i2o_event_register again with a evt_mask of 0. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_event_register(struct i2o_device *dev, struct i2o_driver *drv, - int tcntxt, u32 evt_mask) -{ - struct i2o_controller *c = dev->iop; - struct i2o_message *msg; - - msg = i2o_msg_get_wait(c, I2O_TIMEOUT_MESSAGE_GET); - if (IS_ERR(msg)) - return PTR_ERR(msg); - - msg->u.head[0] = cpu_to_le32(FIVE_WORD_MSG_SIZE | SGL_OFFSET_0); - msg->u.head[1] = - cpu_to_le32(I2O_CMD_UTIL_EVT_REGISTER << 24 | HOST_TID << 12 | dev-> - lct_data.tid); - msg->u.s.icntxt = cpu_to_le32(drv->context); - msg->u.s.tcntxt = cpu_to_le32(tcntxt); - msg->body[0] = cpu_to_le32(evt_mask); - - i2o_msg_post(c, msg); - - return 0; -} - -/** - * i2o_iop_init - I2O main initialization function - * - * Initialize the I2O drivers (OSM) functions, register the Executive OSM, - * initialize the I2O PCI part and finally initialize I2O device stuff. - * - * Returns 0 on success or negative error code on failure. - */ -static int __init i2o_iop_init(void) -{ - int rc = 0; - - printk(KERN_INFO OSM_DESCRIPTION " v" OSM_VERSION "\n"); - - rc = i2o_driver_init(); - if (rc) - goto exit; - - rc = i2o_exec_init(); - if (rc) - goto driver_exit; - - rc = i2o_pci_init(); - if (rc) - goto exec_exit; - - return 0; - - exec_exit: - i2o_exec_exit(); - - driver_exit: - i2o_driver_exit(); - - exit: - return rc; -} - -/** - * i2o_iop_exit - I2O main exit function - * - * Removes I2O controllers from PCI subsystem and shut down OSMs. - */ -static void __exit i2o_iop_exit(void) -{ - i2o_pci_exit(); - i2o_exec_exit(); - i2o_driver_exit(); -} - -module_init(i2o_iop_init); -module_exit(i2o_iop_exit); - -MODULE_AUTHOR("Red Hat Software"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION(OSM_DESCRIPTION); -MODULE_VERSION(OSM_VERSION); - -#if BITS_PER_LONG == 64 -EXPORT_SYMBOL(i2o_cntxt_list_add); -EXPORT_SYMBOL(i2o_cntxt_list_get); -EXPORT_SYMBOL(i2o_cntxt_list_remove); -EXPORT_SYMBOL(i2o_cntxt_list_get_ptr); -#endif -EXPORT_SYMBOL(i2o_msg_get_wait); -EXPORT_SYMBOL(i2o_find_iop); -EXPORT_SYMBOL(i2o_iop_find_device); -EXPORT_SYMBOL(i2o_event_register); -EXPORT_SYMBOL(i2o_status_get); -EXPORT_SYMBOL(i2o_controllers); diff --git a/drivers/staging/i2o/memory.c b/drivers/staging/i2o/memory.c deleted file mode 100644 index 78b702c18537..000000000000 --- a/drivers/staging/i2o/memory.c +++ /dev/null @@ -1,312 +0,0 @@ -/* - * Functions to handle I2O memory - * - * Pulled from the inlines in i2o headers and uninlined - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include "i2o.h" -#include -#include -#include -#include "core.h" - -/* Protects our 32/64bit mask switching */ -static DEFINE_MUTEX(mem_lock); - -/** - * i2o_sg_tablesize - Calculate the maximum number of elements in a SGL - * @c: I2O controller for which the calculation should be done - * @body_size: maximum body size used for message in 32-bit words. - * - * Return the maximum number of SG elements in a SG list. - */ -u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size) -{ - i2o_status_block *sb = c->status_block.virt; - u16 sg_count = - (sb->inbound_frame_size - sizeof(struct i2o_message) / 4) - - body_size; - - if (c->pae_support) { - /* - * for 64-bit a SG attribute element must be added and each - * SG element needs 12 bytes instead of 8. - */ - sg_count -= 2; - sg_count /= 3; - } else - sg_count /= 2; - - if (c->short_req && (sg_count > 8)) - sg_count = 8; - - return sg_count; -} -EXPORT_SYMBOL_GPL(i2o_sg_tablesize); - - -/** - * i2o_dma_map_single - Map pointer to controller and fill in I2O message. - * @c: I2O controller - * @ptr: pointer to the data which should be mapped - * @size: size of data in bytes - * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE - * @sg_ptr: pointer to the SG list inside the I2O message - * - * This function does all necessary DMA handling and also writes the I2O - * SGL elements into the I2O message. For details on DMA handling see also - * dma_map_single(). The pointer sg_ptr will only be set to the end of the - * SG list if the allocation was successful. - * - * Returns DMA address which must be checked for failures using - * dma_mapping_error(). - */ -dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr, - size_t size, - enum dma_data_direction direction, - u32 ** sg_ptr) -{ - u32 sg_flags; - u32 *mptr = *sg_ptr; - dma_addr_t dma_addr; - - switch (direction) { - case DMA_TO_DEVICE: - sg_flags = 0xd4000000; - break; - case DMA_FROM_DEVICE: - sg_flags = 0xd0000000; - break; - default: - return 0; - } - - dma_addr = dma_map_single(&c->pdev->dev, ptr, size, direction); - if (!dma_mapping_error(&c->pdev->dev, dma_addr)) { -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) { - *mptr++ = cpu_to_le32(0x7C020002); - *mptr++ = cpu_to_le32(PAGE_SIZE); - } -#endif - - *mptr++ = cpu_to_le32(sg_flags | size); - *mptr++ = cpu_to_le32(i2o_dma_low(dma_addr)); -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) - *mptr++ = cpu_to_le32(i2o_dma_high(dma_addr)); -#endif - *sg_ptr = mptr; - } - return dma_addr; -} -EXPORT_SYMBOL_GPL(i2o_dma_map_single); - -/** - * i2o_dma_map_sg - Map a SG List to controller and fill in I2O message. - * @c: I2O controller - * @sg: SG list to be mapped - * @sg_count: number of elements in the SG list - * @direction: DMA_TO_DEVICE / DMA_FROM_DEVICE - * @sg_ptr: pointer to the SG list inside the I2O message - * - * This function does all necessary DMA handling and also writes the I2O - * SGL elements into the I2O message. For details on DMA handling see also - * dma_map_sg(). The pointer sg_ptr will only be set to the end of the SG - * list if the allocation was successful. - * - * Returns 0 on failure or 1 on success. - */ -int i2o_dma_map_sg(struct i2o_controller *c, struct scatterlist *sg, - int sg_count, enum dma_data_direction direction, u32 ** sg_ptr) -{ - u32 sg_flags; - u32 *mptr = *sg_ptr; - - switch (direction) { - case DMA_TO_DEVICE: - sg_flags = 0x14000000; - break; - case DMA_FROM_DEVICE: - sg_flags = 0x10000000; - break; - default: - return 0; - } - - sg_count = dma_map_sg(&c->pdev->dev, sg, sg_count, direction); - if (!sg_count) - return 0; - -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) { - *mptr++ = cpu_to_le32(0x7C020002); - *mptr++ = cpu_to_le32(PAGE_SIZE); - } -#endif - - while (sg_count-- > 0) { - if (!sg_count) - sg_flags |= 0xC0000000; - *mptr++ = cpu_to_le32(sg_flags | sg_dma_len(sg)); - *mptr++ = cpu_to_le32(i2o_dma_low(sg_dma_address(sg))); -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if ((sizeof(dma_addr_t) > 4) && c->pae_support) - *mptr++ = cpu_to_le32(i2o_dma_high(sg_dma_address(sg))); -#endif - sg = sg_next(sg); - } - *sg_ptr = mptr; - - return 1; -} -EXPORT_SYMBOL_GPL(i2o_dma_map_sg); - -/** - * i2o_dma_alloc - Allocate DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which should get the DMA buffer - * @len: length of the new DMA memory - * - * Allocate a coherent DMA memory and write the pointers into addr. - * - * Returns 0 on success or -ENOMEM on failure. - */ -int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len) -{ - struct pci_dev *pdev = to_pci_dev(dev); - int dma_64 = 0; - - mutex_lock(&mem_lock); - if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_BIT_MASK(64))) { - dma_64 = 1; - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - mutex_unlock(&mem_lock); - return -ENOMEM; - } - } - - addr->virt = dma_alloc_coherent(dev, len, &addr->phys, GFP_KERNEL); - - if ((sizeof(dma_addr_t) > 4) && dma_64) - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) - printk(KERN_WARNING "i2o: unable to set 64-bit DMA"); - mutex_unlock(&mem_lock); - - if (!addr->virt) - return -ENOMEM; - - memset(addr->virt, 0, len); - addr->len = len; - - return 0; -} -EXPORT_SYMBOL_GPL(i2o_dma_alloc); - - -/** - * i2o_dma_free - Free DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: i2o_dma struct which contains the DMA buffer - * - * Free a coherent DMA memory and set virtual address of addr to NULL. - */ -void i2o_dma_free(struct device *dev, struct i2o_dma *addr) -{ - if (addr->virt) { - if (addr->phys) - dma_free_coherent(dev, addr->len, addr->virt, - addr->phys); - else - kfree(addr->virt); - addr->virt = NULL; - } -} -EXPORT_SYMBOL_GPL(i2o_dma_free); - - -/** - * i2o_dma_realloc - Realloc DMA memory - * @dev: struct device pointer to the PCI device of the I2O controller - * @addr: pointer to a i2o_dma struct DMA buffer - * @len: new length of memory - * - * If there was something allocated in the addr, free it first. If len > 0 - * than try to allocate it and write the addresses back to the addr - * structure. If len == 0 set the virtual address to NULL. - * - * Returns the 0 on success or negative error code on failure. - */ -int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr, size_t len) -{ - i2o_dma_free(dev, addr); - - if (len) - return i2o_dma_alloc(dev, addr, len); - - return 0; -} -EXPORT_SYMBOL_GPL(i2o_dma_realloc); - -/* - * i2o_pool_alloc - Allocate an slab cache and mempool - * @mempool: pointer to struct i2o_pool to write data into. - * @name: name which is used to identify cache - * @size: size of each object - * @min_nr: minimum number of objects - * - * First allocates a slab cache with name and size. Then allocates a - * mempool which uses the slab cache for allocation and freeing. - * - * Returns 0 on success or negative error code on failure. - */ -int i2o_pool_alloc(struct i2o_pool *pool, const char *name, - size_t size, int min_nr) -{ - pool->name = kstrdup(name, GFP_KERNEL); - if (!pool->name) - goto exit; - - pool->slab = - kmem_cache_create(pool->name, size, 0, SLAB_HWCACHE_ALIGN, NULL); - if (!pool->slab) - goto free_name; - - pool->mempool = mempool_create_slab_pool(min_nr, pool->slab); - if (!pool->mempool) - goto free_slab; - - return 0; - -free_slab: - kmem_cache_destroy(pool->slab); - -free_name: - kfree(pool->name); - -exit: - return -ENOMEM; -} -EXPORT_SYMBOL_GPL(i2o_pool_alloc); - -/* - * i2o_pool_free - Free slab cache and mempool again - * @mempool: pointer to struct i2o_pool which should be freed - * - * Note that you have to return all objects to the mempool again before - * calling i2o_pool_free(). - */ -void i2o_pool_free(struct i2o_pool *pool) -{ - mempool_destroy(pool->mempool); - kmem_cache_destroy(pool->slab); - kfree(pool->name); -}; -EXPORT_SYMBOL_GPL(i2o_pool_free); diff --git a/drivers/staging/i2o/pci.c b/drivers/staging/i2o/pci.c deleted file mode 100644 index 49804c9cf74f..000000000000 --- a/drivers/staging/i2o/pci.c +++ /dev/null @@ -1,500 +0,0 @@ -/* - * PCI handling of I2O controller - * - * Copyright (C) 1999-2002 Red Hat Software - * - * Written by Alan Cox, Building Number Three Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * A lot of the I2O message side code from this is taken from the Red - * Creek RCPCI45 adapter driver by Red Creek Communications - * - * Fixes/additions: - * Philipp Rumpf - * Juha Sievänen - * Auvo Häkkinen - * Deepak Saxena - * Boji T Kannanthanam - * Alan Cox : - * Ported to Linux 2.5. - * Markus Lidel : - * Minor fixes for 2.6. - * Markus Lidel : - * Support for sysfs included. - */ - -#include -#include -#include -#include "i2o.h" -#include -#include "core.h" - -#define OSM_DESCRIPTION "I2O-subsystem" - -/* PCI device id table for all I2O controllers */ -static struct pci_device_id i2o_pci_ids[] = { - {PCI_DEVICE_CLASS(PCI_CLASS_INTELLIGENT_I2O << 8, 0xffff00)}, - {PCI_DEVICE(PCI_VENDOR_ID_DPT, 0xa511)}, - {.vendor = PCI_VENDOR_ID_INTEL,.device = 0x1962, - .subvendor = PCI_VENDOR_ID_PROMISE,.subdevice = PCI_ANY_ID}, - {0} -}; - -/** - * i2o_pci_free - Frees the DMA memory for the I2O controller - * @c: I2O controller to free - * - * Remove all allocated DMA memory and unmap memory IO regions. If MTRR - * is enabled, also remove it again. - */ -static void i2o_pci_free(struct i2o_controller *c) -{ - struct device *dev; - - dev = &c->pdev->dev; - - i2o_dma_free(dev, &c->out_queue); - i2o_dma_free(dev, &c->status_block); - kfree(c->lct); - i2o_dma_free(dev, &c->dlct); - i2o_dma_free(dev, &c->hrt); - i2o_dma_free(dev, &c->status); - - if (c->raptor && c->in_queue.virt) - iounmap(c->in_queue.virt); - - if (c->base.virt) - iounmap(c->base.virt); - - pci_release_regions(c->pdev); -} - -/** - * i2o_pci_alloc - Allocate DMA memory, map IO memory for I2O controller - * @c: I2O controller - * - * Allocate DMA memory for a PCI (or in theory AGP) I2O controller. All - * IO mappings are also done here. If MTRR is enabled, also do add memory - * regions here. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_pci_alloc(struct i2o_controller *c) -{ - struct pci_dev *pdev = c->pdev; - struct device *dev = &pdev->dev; - int i; - - if (pci_request_regions(pdev, OSM_DESCRIPTION)) { - printk(KERN_ERR "%s: device already claimed\n", c->name); - return -ENODEV; - } - - for (i = 0; i < 6; i++) { - /* Skip I/O spaces */ - if (!(pci_resource_flags(pdev, i) & IORESOURCE_IO)) { - if (!c->base.phys) { - c->base.phys = pci_resource_start(pdev, i); - c->base.len = pci_resource_len(pdev, i); - - /* - * If we know what card it is, set the size - * correctly. Code is taken from dpt_i2o.c - */ - if (pdev->device == 0xa501) { - if (pdev->subsystem_device >= 0xc032 && - pdev->subsystem_device <= 0xc03b) { - if (c->base.len > 0x400000) - c->base.len = 0x400000; - } else { - if (c->base.len > 0x100000) - c->base.len = 0x100000; - } - } - if (!c->raptor) - break; - } else { - c->in_queue.phys = pci_resource_start(pdev, i); - c->in_queue.len = pci_resource_len(pdev, i); - break; - } - } - } - - if (i == 6) { - printk(KERN_ERR "%s: I2O controller has no memory regions" - " defined.\n", c->name); - i2o_pci_free(c); - return -EINVAL; - } - - /* Map the I2O controller */ - if (c->raptor) { - printk(KERN_INFO "%s: PCI I2O controller\n", c->name); - printk(KERN_INFO " BAR0 at 0x%08lX size=%ld\n", - (unsigned long)c->base.phys, (unsigned long)c->base.len); - printk(KERN_INFO " BAR1 at 0x%08lX size=%ld\n", - (unsigned long)c->in_queue.phys, - (unsigned long)c->in_queue.len); - } else - printk(KERN_INFO "%s: PCI I2O controller at %08lX size=%ld\n", - c->name, (unsigned long)c->base.phys, - (unsigned long)c->base.len); - - c->base.virt = ioremap_nocache(c->base.phys, c->base.len); - if (!c->base.virt) { - printk(KERN_ERR "%s: Unable to map controller.\n", c->name); - i2o_pci_free(c); - return -ENOMEM; - } - - if (c->raptor) { - c->in_queue.virt = - ioremap_nocache(c->in_queue.phys, c->in_queue.len); - if (!c->in_queue.virt) { - printk(KERN_ERR "%s: Unable to map controller.\n", - c->name); - i2o_pci_free(c); - return -ENOMEM; - } - } else - c->in_queue = c->base; - - c->irq_status = c->base.virt + I2O_IRQ_STATUS; - c->irq_mask = c->base.virt + I2O_IRQ_MASK; - c->in_port = c->base.virt + I2O_IN_PORT; - c->out_port = c->base.virt + I2O_OUT_PORT; - - /* Motorola/Freescale chip does not follow spec */ - if (pdev->vendor == PCI_VENDOR_ID_MOTOROLA && pdev->device == 0x18c0) { - /* Check if CPU is enabled */ - if (be32_to_cpu(readl(c->base.virt + 0x10000)) & 0x10000000) { - printk(KERN_INFO "%s: MPC82XX needs CPU running to " - "service I2O.\n", c->name); - i2o_pci_free(c); - return -ENODEV; - } else { - c->irq_status += I2O_MOTOROLA_PORT_OFFSET; - c->irq_mask += I2O_MOTOROLA_PORT_OFFSET; - c->in_port += I2O_MOTOROLA_PORT_OFFSET; - c->out_port += I2O_MOTOROLA_PORT_OFFSET; - printk(KERN_INFO "%s: MPC82XX workarounds activated.\n", - c->name); - } - } - - if (i2o_dma_alloc(dev, &c->status, 8)) { - i2o_pci_free(c); - return -ENOMEM; - } - - if (i2o_dma_alloc(dev, &c->hrt, sizeof(i2o_hrt))) { - i2o_pci_free(c); - return -ENOMEM; - } - - if (i2o_dma_alloc(dev, &c->dlct, 8192)) { - i2o_pci_free(c); - return -ENOMEM; - } - - if (i2o_dma_alloc(dev, &c->status_block, sizeof(i2o_status_block))) { - i2o_pci_free(c); - return -ENOMEM; - } - - if (i2o_dma_alloc(dev, &c->out_queue, - I2O_MAX_OUTBOUND_MSG_FRAMES * I2O_OUTBOUND_MSG_FRAME_SIZE * - sizeof(u32))) { - i2o_pci_free(c); - return -ENOMEM; - } - - pci_set_drvdata(pdev, c); - - return 0; -} - -/** - * i2o_pci_interrupt - Interrupt handler for I2O controller - * @irq: interrupt line - * @dev_id: pointer to the I2O controller - * - * Handle an interrupt from a PCI based I2O controller. This turns out - * to be rather simple. We keep the controller pointer in the cookie. - */ -static irqreturn_t i2o_pci_interrupt(int irq, void *dev_id) -{ - struct i2o_controller *c = dev_id; - u32 m; - irqreturn_t rc = IRQ_NONE; - - while (readl(c->irq_status) & I2O_IRQ_OUTBOUND_POST) { - m = readl(c->out_port); - if (m == I2O_QUEUE_EMPTY) { - /* - * Old 960 steppings had a bug in the I2O unit that - * caused the queue to appear empty when it wasn't. - */ - m = readl(c->out_port); - if (unlikely(m == I2O_QUEUE_EMPTY)) - break; - } - - /* dispatch it */ - if (i2o_driver_dispatch(c, m)) - /* flush it if result != 0 */ - i2o_flush_reply(c, m); - - rc = IRQ_HANDLED; - } - - return rc; -} - -/** - * i2o_pci_irq_enable - Allocate interrupt for I2O controller - * @c: i2o_controller that the request is for - * - * Allocate an interrupt for the I2O controller, and activate interrupts - * on the I2O controller. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_pci_irq_enable(struct i2o_controller *c) -{ - struct pci_dev *pdev = c->pdev; - int rc; - - writel(0xffffffff, c->irq_mask); - - if (pdev->irq) { - rc = request_irq(pdev->irq, i2o_pci_interrupt, IRQF_SHARED, - c->name, c); - if (rc < 0) { - printk(KERN_ERR "%s: unable to allocate interrupt %d." - "\n", c->name, pdev->irq); - return rc; - } - } - - writel(0x00000000, c->irq_mask); - - printk(KERN_INFO "%s: Installed at IRQ %d\n", c->name, pdev->irq); - - return 0; -} - -/** - * i2o_pci_irq_disable - Free interrupt for I2O controller - * @c: I2O controller - * - * Disable interrupts in I2O controller and then free interrupt. - */ -static void i2o_pci_irq_disable(struct i2o_controller *c) -{ - writel(0xffffffff, c->irq_mask); - - if (c->pdev->irq > 0) - free_irq(c->pdev->irq, c); -} - -/** - * i2o_pci_probe - Probe the PCI device for an I2O controller - * @pdev: PCI device to test - * @id: id which matched with the PCI device id table - * - * Probe the PCI device for any device which is a memory of the - * Intelligent, I2O class or an Adaptec Zero Channel Controller. We - * attempt to set up each such device and register it with the core. - * - * Returns 0 on success or negative error code on failure. - */ -static int i2o_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) -{ - struct i2o_controller *c; - int rc; - struct pci_dev *i960 = NULL; - - printk(KERN_INFO "i2o: Checking for PCI I2O controllers...\n"); - - if ((pdev->class & 0xff) > 1) { - printk(KERN_WARNING "i2o: %s does not support I2O 1.5 " - "(skipping).\n", pci_name(pdev)); - return -ENODEV; - } - - rc = pci_enable_device(pdev); - if (rc) { - printk(KERN_WARNING "i2o: couldn't enable device %s\n", - pci_name(pdev)); - return rc; - } - - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) { - printk(KERN_WARNING "i2o: no suitable DMA found for %s\n", - pci_name(pdev)); - rc = -ENODEV; - goto disable; - } - - pci_set_master(pdev); - - c = i2o_iop_alloc(); - if (IS_ERR(c)) { - printk(KERN_ERR "i2o: couldn't allocate memory for %s\n", - pci_name(pdev)); - rc = PTR_ERR(c); - goto disable; - } else - printk(KERN_INFO "%s: controller found (%s)\n", c->name, - pci_name(pdev)); - - c->pdev = pdev; - c->device.parent = &pdev->dev; - - /* Cards that fall apart if you hit them with large I/O loads... */ - if (pdev->vendor == PCI_VENDOR_ID_NCR && pdev->device == 0x0630) { - c->short_req = 1; - printk(KERN_INFO "%s: Symbios FC920 workarounds activated.\n", - c->name); - } - - if (pdev->subsystem_vendor == PCI_VENDOR_ID_PROMISE) { - /* - * Expose the ship behind i960 for initialization, or it will - * failed - */ - i960 = pci_get_slot(c->pdev->bus, - PCI_DEVFN(PCI_SLOT(c->pdev->devfn), 0)); - - if (i960) { - pci_write_config_word(i960, 0x42, 0); - pci_dev_put(i960); - } - - c->promise = 1; - c->limit_sectors = 1; - } - - if (pdev->subsystem_vendor == PCI_VENDOR_ID_DPT) - c->adaptec = 1; - - /* Cards that go bananas if you quiesce them before you reset them. */ - if (pdev->vendor == PCI_VENDOR_ID_DPT) { - c->no_quiesce = 1; - if (pdev->device == 0xa511) - c->raptor = 1; - - if (pdev->subsystem_device == 0xc05a) { - c->limit_sectors = 1; - printk(KERN_INFO - "%s: limit sectors per request to %d\n", c->name, - I2O_MAX_SECTORS_LIMITED); - } -#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 - if (sizeof(dma_addr_t) > 4) { - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) - printk(KERN_INFO "%s: 64-bit DMA unavailable\n", - c->name); - else { - c->pae_support = 1; - printk(KERN_INFO "%s: using 64-bit DMA\n", - c->name); - } - } -#endif - } - - rc = i2o_pci_alloc(c); - if (rc) { - printk(KERN_ERR "%s: DMA / IO allocation for I2O controller " - "failed\n", c->name); - goto free_controller; - } - - if (i2o_pci_irq_enable(c)) { - printk(KERN_ERR "%s: unable to enable interrupts for I2O " - "controller\n", c->name); - goto free_pci; - } - - rc = i2o_iop_add(c); - if (rc) - goto uninstall; - - if (i960) - pci_write_config_word(i960, 0x42, 0x03ff); - - return 0; - - uninstall: - i2o_pci_irq_disable(c); - - free_pci: - i2o_pci_free(c); - - free_controller: - i2o_iop_free(c); - - disable: - pci_disable_device(pdev); - - return rc; -} - -/** - * i2o_pci_remove - Removes a I2O controller from the system - * @pdev: I2O controller which should be removed - * - * Reset the I2O controller, disable interrupts and remove all allocated - * resources. - */ -static void i2o_pci_remove(struct pci_dev *pdev) -{ - struct i2o_controller *c; - c = pci_get_drvdata(pdev); - - i2o_iop_remove(c); - i2o_pci_irq_disable(c); - i2o_pci_free(c); - - pci_disable_device(pdev); - - printk(KERN_INFO "%s: Controller removed.\n", c->name); - - put_device(&c->device); -}; - -/* PCI driver for I2O controller */ -static struct pci_driver i2o_pci_driver = { - .name = "PCI_I2O", - .id_table = i2o_pci_ids, - .probe = i2o_pci_probe, - .remove = i2o_pci_remove, -}; - -/** - * i2o_pci_init - registers I2O PCI driver in PCI subsystem - * - * Returns > 0 on success or negative error code on failure. - */ -int __init i2o_pci_init(void) -{ - return pci_register_driver(&i2o_pci_driver); -}; - -/** - * i2o_pci_exit - unregisters I2O PCI driver from PCI subsystem - */ -void __exit i2o_pci_exit(void) -{ - pci_unregister_driver(&i2o_pci_driver); -}; - -MODULE_DEVICE_TABLE(pci, i2o_pci_ids);