From: Juergen Gier Date: Thu, 14 May 2015 11:55:04 +0000 (-0300) Subject: [media] saa7134: switch tuner FMD1216ME_MK3 to analog X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4aed283c0f7c2b60dc211d2ab8966b3e8c0dddf7;p=linux-beck.git [media] saa7134: switch tuner FMD1216ME_MK3 to analog The tuner FMD1216ME_MK3 suffers the same problem as FMD1216MEX_MK3, as described in saa7134-cards.c (disabled IF, enabled DVB-T). The card does work under MS Windows, after soft reboot into Linux it continues to work, only then tda9887 is loaded as well. I copied the relevant code from the BEHOLD_H6 section to MD7134. The CTX946 TV card doesn't detect a signal after cold boot, seems Signed-off-by: Juergen Gier Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/pci/saa7134/saa7134-cards.c b/drivers/media/pci/saa7134/saa7134-cards.c index 9fac6a9b7937..c52032940af6 100644 --- a/drivers/media/pci/saa7134/saa7134-cards.c +++ b/drivers/media/pci/saa7134/saa7134-cards.c @@ -7798,10 +7798,11 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_MD7134: { u8 subaddr; - u8 data[3]; + u8 data[3], data1[] = { 0x09, 0x9f, 0x86, 0x11}; int ret, tuner_t; - struct i2c_msg msg[] = {{.addr=0x50, .flags=0, .buf=&subaddr, .len = 1}, - {.addr=0x50, .flags=I2C_M_RD, .buf=data, .len = 3}}; + struct i2c_msg msg[] = {{.addr = 0x50, .flags = 0, .buf = &subaddr, .len = 1}, + {.addr = 0x50, .flags = I2C_M_RD, .buf = data, .len = 3}}, + msg1 = {.addr = 0x61, .flags = 0, .buf = data1, .len = sizeof(data1)}; subaddr= 0x14; tuner_t = 0; @@ -7856,6 +7857,16 @@ int saa7134_board_init2(struct saa7134_dev *dev) } pr_info("%s Tuner type is %d\n", dev->name, dev->tuner_type); + + /* The tuner TUNER_PHILIPS_FMD1216ME_MK3 after hardware */ + /* start has disabled IF and enabled DVB-T. When saa7134 */ + /* scan I2C devices it will not detect IF tda9887 and can`t*/ + /* watch TV without software reboot. To solve this problem */ + /* switch the tuner to analog TV mode manually. */ + if (dev->tuner_type == TUNER_PHILIPS_FMD1216ME_MK3) { + if (i2c_transfer(&dev->i2c_adap, &msg1, 1) != 1) + printk(KERN_WARNING "%s: Unable to enable IF of the tuner.\n", dev->name); + } break; } case SAA7134_BOARD_PHILIPS_EUROPA: