From: Shobhit Kumar Date: Thu, 5 Feb 2015 11:38:45 +0000 (+0530) Subject: drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4ba7d93afee0a2ddef7598f460927d39f33fe98b;p=linux-beck.git drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL LP_OUTPUT_HOLD is only in MIPI_PORT_CTRL(PORT_A) even for PORT_C in case of dual link. In the dual link implementation, the bit is correctly set or unset for hardcoded PORT_A, but for bit update the register base value is read by using MIPI_PORT_CTRL(port) in a loop. The second iteration will read base value from PORT_C and program for PORT_A. Mostly in case of dual link all other bit values should be same, but logically we should read from PORT_A. So hardcode to read initial value from PORT_A as well. Signed-off-by: Shobhit Kumar Signed-off-by: Jani Nikula --- diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index ef3df5e3d819..10ab68457ca8 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -360,12 +360,11 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_ENTER); usleep_range(2500, 3000); - val = I915_READ(MIPI_PORT_CTRL(port)); - /* Enable MIPI PHY transparent latch * Common bit for both MIPI Port A & MIPI Port C * No similar bit in MIPI Port C reg */ + val = I915_READ(MIPI_PORT_CTRL(PORT_A)); I915_WRITE(MIPI_PORT_CTRL(PORT_A), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); @@ -543,10 +542,10 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) == 0x00000), 30)) DRM_ERROR("DSI LP not going Low\n"); - val = I915_READ(MIPI_PORT_CTRL(port)); /* Disable MIPI PHY transparent latch * Common bit for both MIPI Port A & MIPI Port C */ + val = I915_READ(MIPI_PORT_CTRL(PORT_A)); I915_WRITE(MIPI_PORT_CTRL(PORT_A), val & ~LP_OUTPUT_HOLD); usleep_range(1000, 1500);