From: Chen-Yu Tsai Date: Fri, 20 Jun 2014 14:52:53 +0000 (+0800) Subject: ARM: sun8i: dt: Add Ippo-q8h v5 support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4c3d4a361b7e6a24303e65f443285afd91371694;p=linux-beck.git ARM: sun8i: dt: Add Ippo-q8h v5 support The Ippo-q8h is a tablet circuit board commonly found in cheap Android tablets with A23 SoCs. There are at least 2 versions of the board, with different peripherals, such as WiFi chips. Common features among these tablets include 512 MB DRAM, NAND, MMC, LCD, capacitive touchscreen, accelerometer, 1 or 2 camera sensors, USB OTG, microphone and speaker. v5 of these board designs has a ESP8089 WiFi chip (not supported) connected to mmc1. This patch adds very basic support. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5986ff63b901..774a14b91151 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -380,6 +380,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubietruck.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-olinuxino-micro.dtb +dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a23-ippo-q8h-v5.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts new file mode 100644 index 000000000000..34002e3eba9d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun8i-a23.dtsi" + +/ { + model = "Ippo Q8H Dual Core Tablet (v5)"; + compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + r_uart: serial@01f02800 { + status = "okay"; + }; + }; +};