From: Jean Delvare Date: Tue, 9 Aug 2005 18:28:10 +0000 (+0200) Subject: [PATCH] I2C: Centralize 24RF08 corruption prevention X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4c9337da37c877e53a64696fc8524f642d446cba;p=linux-beck.git [PATCH] I2C: Centralize 24RF08 corruption prevention The 24RF08 corruption would better be prevented at i2c-core level than at chip driver level, for several reasons: * The second quick write should happen as soon as possible after the first one, so as to limit the risk that another command is issued on the bus inbetween, causing the corruption. * As a matter of fact, the protection code at driver level was reworked at least three times already, which proves how hard it is to get it right there, while it's straightforward at i2c-core level. * It's easy to add a new driver that would need the protection, and forget to add it. This did happen already. * As additional probing addresses can be passed to most i2c chip drivers as module parameters, virtually every i2c chip driver would need the protection if we want to be really safe. * Why duplicate code when we can easily avoid it? Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients index 5eb8d37cc679..4849dfd6961c 100644 --- a/Documentation/i2c/porting-clients +++ b/Documentation/i2c/porting-clients @@ -90,6 +90,8 @@ Technical changes: device_create_file. Move the driver initialization before any sysfs file creation. Drop client->id. + Drop any 24RF08 corruption prevention you find, as this is now done + at the i2c-core level, and doing it twice voids it. * [Init] Limits must not be set by the driver (can be done later in user-space). Chip should not be reset default (although a module diff --git a/drivers/i2c/chips/eeprom.c b/drivers/i2c/chips/eeprom.c index a27420a54c84..d58403a47908 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/i2c/chips/eeprom.c @@ -161,11 +161,6 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind) struct eeprom_data *data; int err = 0; - /* prevent 24RF08 corruption */ - if (kind < 0) - i2c_smbus_xfer(adapter, address, 0, 0, 0, - I2C_SMBUS_QUICK, NULL); - /* There are three ways we can read the EEPROM data: (1) I2C block reads (faster, but unsupported by most adapters) (2) Consecutive byte reads (100% overhead) diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c index 31cee2d34a17..9e1aeb69abf9 100644 --- a/drivers/i2c/chips/max6875.c +++ b/drivers/i2c/chips/max6875.c @@ -171,11 +171,6 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind) struct max6875_data *data; int err = 0; - /* Prevent 24rf08 corruption (in case of user error) */ - if (kind < 0) - i2c_smbus_xfer(adapter, address, 0, 0, 0, - I2C_SMBUS_QUICK, NULL); - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA | I2C_FUNC_SMBUS_READ_BYTE)) return 0; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index bee0148dfab8..dda472e5e8be 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -679,9 +679,16 @@ static int i2c_probe_address(struct i2c_adapter *adapter, int addr, int kind, return 0; /* Make sure there is something at this address, unless forced */ - if (kind < 0 - && i2c_smbus_xfer(adapter, addr, 0, 0, 0, I2C_SMBUS_QUICK, NULL) < 0) - return 0; + if (kind < 0) { + if (i2c_smbus_xfer(adapter, addr, 0, 0, 0, + I2C_SMBUS_QUICK, NULL) < 0) + return 0; + + /* prevent 24RF08 corruption */ + if ((addr & ~0x0f) == 0x50) + i2c_smbus_xfer(adapter, addr, 0, 0, 0, + I2C_SMBUS_QUICK, NULL); + } /* Finally call the custom detection function */ err = found_proc(adapter, addr, kind);