From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Wed, 22 Apr 2015 07:34:29 +0000 (+0300)
Subject: dmaengine: omap-dma: Add support for memcpy
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4ce98c0a20befbcac7953edd05dca2180ade88d6;p=linux-beck.git

dmaengine: omap-dma: Add support for memcpy

The sDMA controller is capable of performing memory copy operation. It need
to be configured to software triggered mode and without HW synchronization.
The sDMA can copy data which is aligned to 8, 16 or 32 bits.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---

diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index 167dbaf65742..7624a0873412 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -362,7 +362,7 @@ static void omap_dma_start_sg(struct omap_chan *c, struct omap_desc *d,
 	struct omap_sg *sg = d->sg + idx;
 	unsigned cxsa, cxei, cxfi;
 
-	if (d->dir == DMA_DEV_TO_MEM) {
+	if (d->dir == DMA_DEV_TO_MEM || d->dir == DMA_MEM_TO_MEM) {
 		cxsa = CDSA;
 		cxei = CDEI;
 		cxfi = CDFI;
@@ -408,7 +408,7 @@ static void omap_dma_start_desc(struct omap_chan *c)
 	if (dma_omap1())
 		omap_dma_chan_write(c, CCR2, d->ccr >> 16);
 
-	if (d->dir == DMA_DEV_TO_MEM) {
+	if (d->dir == DMA_DEV_TO_MEM || d->dir == DMA_MEM_TO_MEM) {
 		cxsa = CSSA;
 		cxei = CSEI;
 		cxfi = CSFI;
@@ -948,6 +948,51 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
 	return vchan_tx_prep(&c->vc, &d->vd, flags);
 }
 
+static struct dma_async_tx_descriptor *omap_dma_prep_dma_memcpy(
+	struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+	size_t len, unsigned long tx_flags)
+{
+	struct omap_chan *c = to_omap_dma_chan(chan);
+	struct omap_desc *d;
+	uint8_t data_type;
+
+	d = kzalloc(sizeof(*d) + sizeof(d->sg[0]), GFP_ATOMIC);
+	if (!d)
+		return NULL;
+
+	data_type = __ffs((src | dest | len));
+	if (data_type > CSDP_DATA_TYPE_32)
+		data_type = CSDP_DATA_TYPE_32;
+
+	d->dir = DMA_MEM_TO_MEM;
+	d->dev_addr = src;
+	d->fi = 0;
+	d->es = data_type;
+	d->sg[0].en = len / BIT(data_type);
+	d->sg[0].fn = 1;
+	d->sg[0].addr = dest;
+	d->sglen = 1;
+	d->ccr = c->ccr;
+	d->ccr |= CCR_DST_AMODE_POSTINC | CCR_SRC_AMODE_POSTINC;
+
+	d->cicr = CICR_DROP_IE;
+	if (tx_flags & DMA_PREP_INTERRUPT)
+		d->cicr |= CICR_FRAME_IE;
+
+	d->csdp = data_type;
+
+	if (dma_omap1()) {
+		d->cicr |= CICR_TOUT_IE;
+		d->csdp |= CSDP_DST_PORT_EMIFF | CSDP_SRC_PORT_EMIFF;
+	} else {
+		d->csdp |= CSDP_DST_PACKED | CSDP_SRC_PACKED;
+		d->cicr |= CICR_MISALIGNED_ERR_IE | CICR_TRANS_ERR_IE;
+		d->csdp |= CSDP_DST_BURST_64 | CSDP_SRC_BURST_64;
+	}
+
+	return vchan_tx_prep(&c->vc, &d->vd, tx_flags);
+}
+
 static int omap_dma_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
 {
 	struct omap_chan *c = to_omap_dma_chan(chan);
@@ -1094,12 +1139,14 @@ static int omap_dma_probe(struct platform_device *pdev)
 
 	dma_cap_set(DMA_SLAVE, od->ddev.cap_mask);
 	dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask);
+	dma_cap_set(DMA_MEMCPY, od->ddev.cap_mask);
 	od->ddev.device_alloc_chan_resources = omap_dma_alloc_chan_resources;
 	od->ddev.device_free_chan_resources = omap_dma_free_chan_resources;
 	od->ddev.device_tx_status = omap_dma_tx_status;
 	od->ddev.device_issue_pending = omap_dma_issue_pending;
 	od->ddev.device_prep_slave_sg = omap_dma_prep_slave_sg;
 	od->ddev.device_prep_dma_cyclic = omap_dma_prep_dma_cyclic;
+	od->ddev.device_prep_dma_memcpy = omap_dma_prep_dma_memcpy;
 	od->ddev.device_config = omap_dma_slave_config;
 	od->ddev.device_pause = omap_dma_pause;
 	od->ddev.device_resume = omap_dma_resume;