From: David Herrmann Date: Thu, 23 May 2013 11:10:25 +0000 (+0200) Subject: HID: Bluetooth: hidp: register HID devices async X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4e713cdffba8d486e58eefe2125041eb5df9aa3a;p=linux-beck.git HID: Bluetooth: hidp: register HID devices async While l2cap_user callbacks are running, the whole hci_dev is locked. Even if we would add more fine-grained locking to HCI core, it would still be called from the non-reentrant rx work-queue and thus block the event processing. However, if we want to perform synchronous I/O during HID device registration (eg., to perform device-detection), we need the HCI core to be able to dispatch incoming data. Therefore, we now move device-registration to a separate worker. The HCI core can continue running and we add devices asynchronously in another kernel thread. Device removal is synchronized and waits for the worker to exit before calling the usual device removal functions. If l2cap_user->remove is called before the thread registered the devices, we set "terminate" to true and the thread will skip it. If l2cap_user->remove is called after it, we notice this as the device is no longer in HIDP_SESSION_PREPARING state and simply unregister the device as we did before. There is no new deadlock as we now call hidp_session_add_dev() with one lock less held (the HCI lock) and it cannot itself call back into HCI as it was called with the HCI-lock held before. One might wonder whether this can block during device unregistration. But we set "terminate" to true and wake the HIDP thread up _before_ unregistering the HID/input devices. Therefore, all pending HID I/O operations are canceled. All further I/O attempts will fail with ENODEV or EIO. So all latency we can get are few context-switches, but no timeouts or blocking I/O waits! This change also prepares for a long standing HID bug. All HID devices that register power_supply devices need to be able to handle callbacks during registration (a power_supply oddity that cannot easily be fixed). So with this patch available, we can allow HID I/O during registration by calling the recently introduced hid_device_io_start/stop helpers, which currently are a no-op for bluetooth due to this locking. Note that we cannot do the same for input devices. input-core doesn't allow us to call input_event() asynchronously to input_register_device(), which HID-core kindly allows (for good reasons). Fixing input-core to allow this isn't as easy as it sounds and is, beside simplifying HIDP, not really an improvement. Hence, we still register input devices synchronously as we did before. Only HID devices are registered asynchronously. Signed-off-by: David Herrmann Acked-by: Jiri Kosina Acked-by: Gustavo Padovan Tested-by: Daniel Nicoletti Signed-off-by: Jiri Kosina --- diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index 940f5acb6694..46c6a148f0b3 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -850,6 +850,29 @@ static void hidp_session_dev_del(struct hidp_session *session) input_unregister_device(session->input); } +/* + * Asynchronous device registration + * HID device drivers might want to perform I/O during initialization to + * detect device types. Therefore, call device registration in a separate + * worker so the HIDP thread can schedule I/O operations. + * Note that this must be called after the worker thread was initialized + * successfully. This will then add the devices and increase session state + * on success, otherwise it will terminate the session thread. + */ +static void hidp_session_dev_work(struct work_struct *work) +{ + struct hidp_session *session = container_of(work, + struct hidp_session, + dev_init); + int ret; + + ret = hidp_session_dev_add(session); + if (!ret) + atomic_inc(&session->state); + else + hidp_session_terminate(session); +} + /* * Create new session object * Allocate session object, initialize static fields, copy input data into the @@ -897,6 +920,7 @@ static int hidp_session_new(struct hidp_session **out, const bdaddr_t *bdaddr, session->idle_to = req->idle_to; /* device management */ + INIT_WORK(&session->dev_init, hidp_session_dev_work); setup_timer(&session->timer, hidp_idle_timeout, (unsigned long)session); @@ -1035,8 +1059,8 @@ static void hidp_session_terminate(struct hidp_session *session) * Probe HIDP session * This is called from the l2cap_conn core when our l2cap_user object is bound * to the hci-connection. We get the session via the \user object and can now - * start the session thread, register the HID/input devices and link it into - * the global session list. + * start the session thread, link it into the global session list and + * schedule HID/input device registration. * The global session-list owns its own reference to the session object so you * can drop your own reference after registering the l2cap_user object. */ @@ -1058,21 +1082,30 @@ static int hidp_session_probe(struct l2cap_conn *conn, goto out_unlock; } + if (session->input) { + ret = hidp_session_dev_add(session); + if (ret) + goto out_unlock; + } + ret = hidp_session_start_sync(session); if (ret) - goto out_unlock; + goto out_del; - ret = hidp_session_dev_add(session); - if (ret) - goto out_stop; + /* HID device registration is async to allow I/O during probe */ + if (session->input) + atomic_inc(&session->state); + else + schedule_work(&session->dev_init); hidp_session_get(session); list_add(&session->list, &hidp_session_list); ret = 0; goto out_unlock; -out_stop: - hidp_session_terminate(session); +out_del: + if (session->input) + hidp_session_dev_del(session); out_unlock: up_write(&hidp_session_sem); return ret; @@ -1102,7 +1135,12 @@ static void hidp_session_remove(struct l2cap_conn *conn, down_write(&hidp_session_sem); hidp_session_terminate(session); - hidp_session_dev_del(session); + + cancel_work_sync(&session->dev_init); + if (session->input || + atomic_read(&session->state) > HIDP_SESSION_PREPARING) + hidp_session_dev_del(session); + list_del(&session->list); up_write(&hidp_session_sem); diff --git a/net/bluetooth/hidp/hidp.h b/net/bluetooth/hidp/hidp.h index 6162ce8606ac..9e6cc3553105 100644 --- a/net/bluetooth/hidp/hidp.h +++ b/net/bluetooth/hidp/hidp.h @@ -128,6 +128,7 @@ int hidp_get_conninfo(struct hidp_conninfo *ci); enum hidp_session_state { HIDP_SESSION_IDLING, + HIDP_SESSION_PREPARING, HIDP_SESSION_RUNNING, }; @@ -156,6 +157,7 @@ struct hidp_session { unsigned long idle_to; /* device management */ + struct work_struct dev_init; struct input_dev *input; struct hid_device *hid; struct timer_list timer;