From: Seungwon Jeon Date: Thu, 26 Mar 2015 16:52:02 +0000 (+0900) Subject: ARM: dts: Add HS400 support for exynos5420 and exynos5800 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4f59ebed8945c7102b960113093bb2e5497d2fab;p=linux-beck.git ARM: dts: Add HS400 support for exynos5420 and exynos5800 HS400 timing values are added for SMDK5420, exynos5420-peach-pit and exynos5800-peach-pi boards. This also adds RCLK GPIO line, this gpio should be in pull-down state. This also enables HS400 on peach-pi and this updates the clock frequency to 800MHz to be set as input clock to controller. Signed-off-by: Seungwon Jeon [alim.akhtar@samsung.com: addressed review comments] Signed-off-by: Alim Akhtar Acked-by: Jaehoon Chung Signed-off-by: Kukjin Kim --- diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 3f4e2feaa927..0788d08fb43e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -699,8 +699,10 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index ba686e40eac7..8b153166ebdb 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -201,6 +201,13 @@ samsung,pin-drv = <3>; }; + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + sd1_cmd: sd1-cmd { samsung,pins = "gpc1-1"; samsung,pin-function = <2>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 7a56852efada..9103f2381a6d 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -80,8 +80,11 @@ samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 + &sd0_rclk>; bus-width = <8>; cap-mmc-highspeed; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index c833bacf873b..412f41d62686 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -654,15 +654,18 @@ num-slots = <1>; broken-cd; mmc-hs200-1_8v; + mmc-hs400-1_8v; cap-mmc-highspeed; non-removable; card-detect-delay = <200>; - clock-frequency = <400000000>; + clock-frequency = <800000000>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>; bus-width = <8>; };