From: Valentine Barshak Date: Thu, 9 Jan 2014 15:23:22 +0000 (+0400) Subject: ARM: shmobile: koelsch: Add SATA0 support X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=4fc0a0b93f178c0b077201ab70a53e1be6a69054;p=linux-beck.git ARM: shmobile: koelsch: Add SATA0 support This adds SATA0 support to Koelsch board. SATA1 is not available since its pinmux configuration is fixed to PCIe. Signed-off-by: Valentine Barshak Acked-by: Magnus Damm Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index de7cc64b1f37..2ab5c75ba2c2 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -148,6 +148,21 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = { .nbuttons = ARRAY_SIZE(gpio_buttons), }; +/* SATA0 */ +static const struct resource sata0_resources[] __initconst = { + DEFINE_RES_MEM(0xee300000, 0x2000), + DEFINE_RES_IRQ(gic_spi(105)), +}; + +static const struct platform_device_info sata0_info __initconst = { + .parent = &platform_bus, + .name = "sata-r8a7791", + .id = 0, + .res = sata0_resources, + .num_res = ARRAY_SIZE(sata0_resources), + .dma_mask = DMA_BIT_MASK(32), +}; + static const struct pinctrl_map koelsch_pinctrl_map[] = { /* DU */ PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791", @@ -192,6 +207,8 @@ static void __init koelsch_add_standard_devices(void) sizeof(koelsch_keys_pdata)); koelsch_add_du_device(); + + platform_device_register_full(&sata0_info); } /*