From: Matt Carlson Date: Mon, 5 Apr 2010 10:19:23 +0000 (+0000) Subject: tg3: Fix message 80 char violations X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=5129c3a3faf8c5f4e6dd6ca581e1c4b06f8e837f;p=linux-beck.git tg3: Fix message 80 char violations Commit 05dbe005386e7521153dce6c5ad95c98b73b80c7, "Use (pr|netdev)_ macro helpers" extended some of the message lines longer than 80 chars. This patch reels the line lengths back in. Signed-off-by: Matt Carlson Reviewed-by: Michael Chan Reviewed-by: Benjamin Li Signed-off-by: David S. Miller --- diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index c7134c37936e..973c8f51f4e8 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -4335,8 +4335,11 @@ static void tg3_tx_recover(struct tg3 *tp) BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) || tp->write32_tx_mbox == tg3_write_indirect_mbox); - netdev_warn(tp->dev, "The system may be re-ordering memory-mapped I/O cycles to the network device, attempting to recover\n" - "Please report the problem to the driver maintainer and include system chipset information.\n"); + netdev_warn(tp->dev, + "The system may be re-ordering memory-mapped I/O " + "cycles to the network device, attempting to recover. " + "Please report the problem to the driver maintainer " + "and include system chipset information.\n"); spin_lock(&tp->lock); tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING; @@ -5260,7 +5263,8 @@ static int tg3_restart_hw(struct tg3 *tp, int reset_phy) err = tg3_init_hw(tp, reset_phy); if (err) { - netdev_err(tp->dev, "Failed to re-initialize device, aborting\n"); + netdev_err(tp->dev, + "Failed to re-initialize device, aborting\n"); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_full_unlock(tp); del_timer_sync(&tp->timer); @@ -5508,7 +5512,8 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, netif_tx_stop_queue(txq); /* This is a hard error, log it. */ - netdev_err(dev, "BUG! Tx Ring full when queue awake!\n"); + netdev_err(dev, + "BUG! Tx Ring full when queue awake!\n"); } return NETDEV_TX_BUSY; } @@ -5711,7 +5716,8 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb, netif_tx_stop_queue(txq); /* This is a hard error, log it. */ - netdev_err(dev, "BUG! Tx Ring full when queue awake!\n"); + netdev_err(dev, + "BUG! Tx Ring full when queue awake!\n"); } return NETDEV_TX_BUSY; } @@ -6058,8 +6064,10 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp, /* Now allocate fresh SKBs for each rx ring. */ for (i = 0; i < tp->rx_pending; i++) { if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_STD, i) < 0) { - netdev_warn(tp->dev, "Using a smaller RX standard ring, only %d out of %d buffers were allocated successfully\n", - i, tp->rx_pending); + netdev_warn(tp->dev, + "Using a smaller RX standard ring. Only " + "%d out of %d buffers were allocated " + "successfully\n", i, tp->rx_pending); if (i == 0) goto initfail; tp->rx_pending = i; @@ -6088,8 +6096,10 @@ static int tg3_rx_prodring_alloc(struct tg3 *tp, for (i = 0; i < tp->rx_jumbo_pending; i++) { if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO, i) < 0) { - netdev_warn(tp->dev, "Using a smaller RX jumbo ring, only %d out of %d buffers were allocated successfully\n", - i, tp->rx_jumbo_pending); + netdev_warn(tp->dev, + "Using a smaller RX jumbo ring. Only %d " + "out of %d buffers were allocated " + "successfully\n", i, tp->rx_jumbo_pending); if (i == 0) goto initfail; tp->rx_jumbo_pending = i; @@ -7158,7 +7168,8 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b if (cpu_base == TX_CPU_BASE && (tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { - netdev_err(tp->dev, "%s: Trying to load TX cpu firmware which is 5705\n", + netdev_err(tp->dev, + "%s: Trying to load TX cpu firmware which is 5705\n", __func__); return -EINVAL; } @@ -7238,7 +7249,8 @@ static int tg3_load_5701_a0_firmware_fix(struct tg3 *tp) udelay(1000); } if (i >= 5) { - netdev_err(tp->dev, "tg3_load_firmware fails to set RX CPU PC, is %08x should be %08x\n", + netdev_err(tp->dev, "%s fails to set RX CPU PC, is %08x " + "should be %08x\n", __func__, tr32(RX_CPU_BASE + CPU_PC), info.fw_base); return -ENODEV; } @@ -7302,7 +7314,8 @@ static int tg3_load_tso_firmware(struct tg3 *tp) udelay(1000); } if (i >= 5) { - netdev_err(tp->dev, "%s fails to set CPU PC, is %08x should be %08x\n", + netdev_err(tp->dev, + "%s fails to set CPU PC, is %08x should be %08x\n", __func__, tr32(cpu_base + CPU_PC), info.fw_base); return -ENODEV; } @@ -8627,8 +8640,9 @@ static int tg3_test_msi(struct tg3 *tp) return err; /* MSI test failed, go back to INTx mode */ - netdev_warn(tp->dev, "No interrupt was generated using MSI, switching to INTx mode\n" - "Please report this failure to the PCI maintainer and include system chipset information\n"); + netdev_warn(tp->dev, "No interrupt was generated using MSI. Switching " + "to INTx mode. Please report this failure to the PCI " + "maintainer and include system chipset information\n"); free_irq(tp->napi[0].irq_vec, &tp->napi[0]); @@ -8740,7 +8754,8 @@ static void tg3_ints_init(struct tg3 *tp) /* All MSI supporting chips should support tagged * status. Assert that this is the case. */ - netdev_warn(tp->dev, "MSI without TAGGED? Not using MSI\n"); + netdev_warn(tp->dev, + "MSI without TAGGED_STATUS? Not using MSI\n"); goto defcfg; } @@ -11778,7 +11793,8 @@ static void __devinit tg3_nvram_init(struct tg3 *tp) tp->tg3_flags |= TG3_FLAG_NVRAM; if (tg3_nvram_lock(tp)) { - netdev_warn(tp->dev, "Cannot get nvram lock, %s failed\n", + netdev_warn(tp->dev, + "Cannot get nvram lock, %s failed\n", __func__); return; } @@ -14130,9 +14146,8 @@ static int __devinit tg3_test_dma(struct tg3 *tp) /* Now read it back. */ ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 0); if (ret) { - dev_err(&tp->pdev->dev, - "%s: Buffer read failed. err = %d\n", - __func__, ret); + dev_err(&tp->pdev->dev, "%s: Buffer read failed. " + "err = %d\n", __func__, ret); break; } @@ -14733,11 +14748,12 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) { struct phy_device *phydev; phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]; - netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", + netdev_info(dev, + "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n", phydev->drv->name, dev_name(&phydev->dev)); } else - netdev_info(dev, "attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n", - tg3_phy_string(tp), + netdev_info(dev, "attached PHY is %s (%s Ethernet) " + "(WireSpeed[%d])\n", tg3_phy_string(tp), ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" : ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" : "10/100/1000Base-T")),