From: Ander Conselvan de Oliveira Date: Fri, 2 Dec 2016 08:23:52 +0000 (+0200) Subject: drm/i915/glk: Set DCC delay range 2 in PLL enable sequence X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=51b3ee35affa3695bd89f6c6cdb22cd65aff5155;p=linux-beck.git drm/i915/glk: Set DCC delay range 2 in PLL enable sequence Follow the PLL enable sequence updated in bspec, which requires the DCC delay range 2 bit to be set. v2: Moved from DDI init sequence to PLL enable. v3: Don't read value from GRP register. (Rodrido) Cc: Rodrigo Vivi Signed-off-by: Ander Conselvan De Oliveira Reviewed-by: Rodrigo Vivi Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-5-git-send-email-ander.conselvan.de.oliveira@intel.com --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index d1f0720c6ef3..6cff01debe72 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1784,6 +1784,21 @@ enum skl_disp_power_wells { #define DEEMPH_SHIFT 24 #define DE_EMPHASIS (0xFF << DEEMPH_SHIFT) +#define _PORT_TX_DW5_LN0_A 0x162514 +#define _PORT_TX_DW5_LN0_B 0x6C514 +#define _PORT_TX_DW5_LN0_C 0x6C914 +#define _PORT_TX_DW5_GRP_A 0x162D14 +#define _PORT_TX_DW5_GRP_B 0x6CD14 +#define _PORT_TX_DW5_GRP_C 0x6CF14 +#define BXT_PORT_TX_DW5_LN0(phy, ch) _MMIO_BXT_PHY_CH(phy, ch, \ + _PORT_TX_DW5_LN0_B, \ + _PORT_TX_DW5_LN0_C) +#define BXT_PORT_TX_DW5_GRP(phy, ch) _MMIO_BXT_PHY_CH(phy, ch, \ + _PORT_TX_DW5_GRP_B, \ + _PORT_TX_DW5_GRP_C) +#define DCC_DELAY_RANGE_1 (1 << 9) +#define DCC_DELAY_RANGE_2 (1 << 8) + #define _PORT_TX_DW14_LN0_A 0x162538 #define _PORT_TX_DW14_LN0_B 0x6C538 #define _PORT_TX_DW14_LN0_C 0x6C938 diff --git a/drivers/gpu/drm/i915/intel_dpll_mgr.c b/drivers/gpu/drm/i915/intel_dpll_mgr.c index 8a82507dfe3f..63104b7a1bcf 100644 --- a/drivers/gpu/drm/i915/intel_dpll_mgr.c +++ b/drivers/gpu/drm/i915/intel_dpll_mgr.c @@ -1458,6 +1458,12 @@ static void bxt_ddi_pll_enable(struct drm_i915_private *dev_priv, 200)) DRM_ERROR("PLL %d not locked\n", port); + if (IS_GEMINILAKE(dev_priv)) { + temp = I915_READ(BXT_PORT_TX_DW5_LN0(phy, ch)); + temp |= DCC_DELAY_RANGE_2; + I915_WRITE(BXT_PORT_TX_DW5_GRP(phy, ch), temp); + } + /* * While we write to the group register to program all lanes at once we * can read only lane registers and we pick lanes 0/1 for that.