From: Nicolas Ferre Date: Thu, 4 Aug 2011 15:49:03 +0000 (+0100) Subject: mmc: at91_mci: remove the use of irq_to_gpio X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=51c5d8d1499b8442e863fe756f76e7f4ea7476fb;p=mv-sheeva.git mmc: at91_mci: remove the use of irq_to_gpio Remove the use of irq_to_gpio() in the card detection interrupt handler. The information is available in the board structure and we can avoid using a function that has little meaning. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index a4aa3af86fe..a8b4d2aa18e 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -869,7 +869,11 @@ static irqreturn_t at91_mci_irq(int irq, void *devid) static irqreturn_t at91_mmc_det_irq(int irq, void *_host) { struct at91mci_host *host = _host; - int present = !gpio_get_value(irq_to_gpio(irq)); + int present; + + /* entering this ISR means that we have configured det_pin: + * we can use its value in board structure */ + present = !gpio_get_value(host->board->det_pin); /* * we expect this irq on both insert and remove,