From: Ajit Khaparde Date: Wed, 10 Feb 2016 17:15:54 +0000 (+0530) Subject: be2net: Interpret and log new data that's added to the port misconfigure async event X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=51d1f98a136fcb16fa3304c2386d9a5202335a63;p=linux-beck.git be2net: Interpret and log new data that's added to the port misconfigure async event >From FW version 11.0. onwards, the PORT_MISCONFIG event generated by the FW will carry more information about the event in the "data_word1" and "data_word2" fields. This patch adds support in the driver to parse the new information and log it accordingly. This patch also changes some of the messages that are being logged currently. Signed-off-by: Suresh Reddy Signed-off-by: Venkat Duvvuru Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 515e206589cc..ab24f84060c6 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -115,6 +115,8 @@ #define RSS_INDIR_TABLE_LEN 128 #define RSS_HASH_KEY_LEN 40 +#define BE_UNKNOWN_PHY_STATE 0xFF + struct be_dma_mem { void *va; dma_addr_t dma; @@ -390,7 +392,7 @@ enum vf_state { #define BE_FLAGS_QNQ_ASYNC_EVT_RCVD BIT(7) #define BE_FLAGS_VXLAN_OFFLOADS BIT(8) #define BE_FLAGS_SETUP_DONE BIT(9) -#define BE_FLAGS_EVT_INCOMPATIBLE_SFP BIT(10) +#define BE_FLAGS_PHY_MISCONFIGURED BIT(10) #define BE_FLAGS_ERR_DETECTION_SCHEDULED BIT(11) #define BE_FLAGS_OS2BMC BIT(12) @@ -603,6 +605,7 @@ struct be_adapter { u32 bmc_filt_mask; u32 fat_dump_len; u16 serial_num[CNTL_SERIAL_NUM_WORDS]; + u8 phy_state; /* state of sfp optics (functional, faulted, etc.,) */ }; #define be_physfn(adapter) (!adapter->virtfn) diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index 33cbbde218be..66fa21426fe2 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -19,19 +19,25 @@ #include "be.h" #include "be_cmds.h" -static char *be_port_misconfig_evt_desc[] = { - "A valid SFP module detected", - "Optics faulted/ incorrectly installed/ not installed.", - "Optics of two types installed.", - "Incompatible optics.", - "Unknown port SFP status" +char *be_misconfig_evt_port_state[] = { + "Physical Link is functional", + "Optics faulted/incorrectly installed/not installed - Reseat optics. If issue not resolved, replace.", + "Optics of two types installed – Remove one optic or install matching pair of optics.", + "Incompatible optics – Replace with compatible optics for card to function.", + "Unqualified optics – Replace with Avago optics for Warranty and Technical Support.", + "Uncertified optics – Replace with Avago-certified optics to enable link operation." }; -static char *be_port_misconfig_remedy_desc[] = { - "", - "Reseat optics. If issue not resolved, replace", - "Remove one optic or install matching pair of optics", - "Replace with compatible optics for card to function", +static char *be_port_misconfig_evt_severity[] = { + "KERN_WARN", + "KERN_INFO", + "KERN_ERR", + "KERN_WARN" +}; + +static char *phy_state_oper_desc[] = { + "Link is non-operational", + "Link is operational", "" }; @@ -297,22 +303,56 @@ static void be_async_port_misconfig_event_process(struct be_adapter *adapter, { struct be_async_event_misconfig_port *evt = (struct be_async_event_misconfig_port *)compl; - u32 sfp_mismatch_evt = le32_to_cpu(evt->event_data_word1); + u32 sfp_misconfig_evt_word1 = le32_to_cpu(evt->event_data_word1); + u32 sfp_misconfig_evt_word2 = le32_to_cpu(evt->event_data_word2); + u8 phy_oper_state = PHY_STATE_OPER_MSG_NONE; struct device *dev = &adapter->pdev->dev; - u8 port_misconfig_evt; + u8 msg_severity = DEFAULT_MSG_SEVERITY; + u8 phy_state_info; + u8 new_phy_state; + + new_phy_state = + (sfp_misconfig_evt_word1 >> (adapter->hba_port_num * 8)) & 0xff; + + if (new_phy_state == adapter->phy_state) + return; + + adapter->phy_state = new_phy_state; - port_misconfig_evt = - ((sfp_mismatch_evt >> (adapter->hba_port_num * 8)) & 0xff); + /* for older fw that doesn't populate link effect data */ + if (!sfp_misconfig_evt_word2) + goto log_message; + phy_state_info = + (sfp_misconfig_evt_word2 >> (adapter->hba_port_num * 8)) & 0xff; + + if (phy_state_info & PHY_STATE_INFO_VALID) { + msg_severity = (phy_state_info & PHY_STATE_MSG_SEVERITY) >> 1; + + if (be_phy_unqualified(new_phy_state)) + phy_oper_state = (phy_state_info & PHY_STATE_OPER); + } + +log_message: /* Log an error message that would allow a user to determine * whether the SFPs have an issue */ - dev_info(dev, "Port %c: %s %s", adapter->port_name, - be_port_misconfig_evt_desc[port_misconfig_evt], - be_port_misconfig_remedy_desc[port_misconfig_evt]); - - if (port_misconfig_evt == INCOMPATIBLE_SFP) - adapter->flags |= BE_FLAGS_EVT_INCOMPATIBLE_SFP; + if (be_phy_state_unknown(new_phy_state)) + dev_printk(be_port_misconfig_evt_severity[msg_severity], dev, + "Port %c: Unrecognized Optics state: 0x%x. %s", + adapter->port_name, + new_phy_state, + phy_state_oper_desc[phy_oper_state]); + else + dev_printk(be_port_misconfig_evt_severity[msg_severity], dev, + "Port %c: %s %s", + adapter->port_name, + be_misconfig_evt_port_state[new_phy_state], + phy_state_oper_desc[phy_oper_state]); + + /* Log Vendor name and part no. if a misconfigured SFP is detected */ + if (be_phy_misconfigured(new_phy_state)) + adapter->flags |= BE_FLAGS_PHY_MISCONFIGURED; } /* Grp5 CoS Priority evt */ diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h index f260ef3329a1..0b9f741f31af 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.h +++ b/drivers/net/ethernet/emulex/benet/be_cmds.h @@ -176,10 +176,53 @@ struct be_async_event_qnq { u32 flags; } __packed; -#define INCOMPATIBLE_SFP 0x3 +enum { + BE_PHY_FUNCTIONAL = 0, + BE_PHY_NOT_PRESENT = 1, + BE_PHY_DIFF_MEDIA = 2, + BE_PHY_INCOMPATIBLE = 3, + BE_PHY_UNQUALIFIED = 4, + BE_PHY_UNCERTIFIED = 5 +}; + +#define PHY_STATE_MSG_SEVERITY 0x6 +#define PHY_STATE_OPER 0x1 +#define PHY_STATE_INFO_VALID 0x80 +#define PHY_STATE_OPER_MSG_NONE 0x2 +#define DEFAULT_MSG_SEVERITY 0x1 + +#define be_phy_state_unknown(phy_state) (phy_state > BE_PHY_UNCERTIFIED) +#define be_phy_unqualified(phy_state) \ + (phy_state == BE_PHY_UNQUALIFIED || \ + phy_state == BE_PHY_UNCERTIFIED) +#define be_phy_misconfigured(phy_state) \ + (phy_state == BE_PHY_INCOMPATIBLE || \ + phy_state == BE_PHY_UNQUALIFIED || \ + phy_state == BE_PHY_UNCERTIFIED) + +extern char *be_misconfig_evt_port_state[]; + /* async event indicating misconfigured port */ struct be_async_event_misconfig_port { + /* DATA_WORD1: + * phy state of port 0: bits 7 - 0 + * phy state of port 1: bits 15 - 8 + * phy state of port 2: bits 23 - 16 + * phy state of port 3: bits 31 - 24 + */ u32 event_data_word1; + /* DATA_WORD2: + * phy state info of port 0: bits 7 - 0 + * phy state info of port 1: bits 15 - 8 + * phy state info of port 2: bits 23 - 16 + * phy state info of port 3: bits 31 - 24 + * + * PHY STATE INFO: + * Link operability :bit 0 + * Message severity :bit 2 - 1 + * Rsvd :bits 6 - 3 + * phy state info valid :bit 7 + */ u32 event_data_word2; u32 rsvd0; u32 flags; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index e4fc87455e00..4ecd8c2beaf5 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4089,6 +4089,7 @@ static void be_setup_init(struct be_adapter *adapter) adapter->if_handle = -1; adapter->be3_native = false; adapter->if_flags = 0; + adapter->phy_state = BE_UNKNOWN_PHY_STATE; if (be_physfn(adapter)) adapter->cmd_privileges = MAX_PRIVILEGES; else @@ -4961,11 +4962,13 @@ static void be_log_sfp_info(struct be_adapter *adapter) status = be_cmd_query_sfp_info(adapter); if (!status) { dev_err(&adapter->pdev->dev, - "Unqualified SFP+ detected on %c from %s part no: %s", - adapter->port_name, adapter->phy.vendor_name, + "Port %c: %s Vendor: %s part no: %s", + adapter->port_name, + be_misconfig_evt_port_state[adapter->phy_state], + adapter->phy.vendor_name, adapter->phy.vendor_pn); } - adapter->flags &= ~BE_FLAGS_EVT_INCOMPATIBLE_SFP; + adapter->flags &= ~BE_FLAGS_PHY_MISCONFIGURED; } static void be_worker(struct work_struct *work) @@ -5009,7 +5012,7 @@ static void be_worker(struct work_struct *work) if (!skyhawk_chip(adapter)) be_eqd_update(adapter, false); - if (adapter->flags & BE_FLAGS_EVT_INCOMPATIBLE_SFP) + if (adapter->flags & BE_FLAGS_PHY_MISCONFIGURED) be_log_sfp_info(adapter); reschedule: